Provided by: e2fsprogs_1.47.0-2.4~exp1ubuntu4.1_amd64 
NAME
mke2fs.conf - Configuration file for mke2fs
DESCRIPTION
mke2fs.conf is the configuration file for mke2fs(8). It controls the default parameters
used by mke2fs(8) when it is creating ext2, ext3, or ext4 file systems.
The mke2fs.conf file uses an INI-style format. Stanzas, or top-level sections, are
delimited by square braces: [ ]. Within each section, each line defines a relation, which
assigns tags to values, or to a subsection, which contains further relations or
subsections. An example of the INI-style format used by this configuration file follows
below:
[section1]
tag1 = value_a
tag1 = value_b
tag2 = value_c
[section 2]
tag3 = {
subtag1 = subtag_value_a
subtag1 = subtag_value_b
subtag2 = subtag_value_c
}
tag1 = value_d
tag2 = value_e
}
Comments are delimited by a semicolon (';') or a hash ('#') character at the beginning of
the comment, and are terminated by the end of line character.
Tags and values must be quoted using double quotes if they contain spaces. Within a
quoted string, the standard backslash interpretations apply: "\n" (for the newline
character), "\t" (for the tab character), "\b" (for the backspace character), and "\\"
(for the backslash character).
Some relations expect a boolean value. The parser is quite liberal on recognizing
``yes'', '`y'', ``true'', ``t'', ``1'', ``on'', etc. as a boolean true value, and ``no'',
``n'', ``false'', ``nil'', ``0'', ``off'' as a boolean false value.
The following stanzas are used in the mke2fs.conf file. They will be described in more
detail in future sections of this document.
[options]
Contains relations which influence how mke2fs behaves.
[defaults]
Contains relations which define the default parameters used by mke2fs(8). In
general, these defaults may be overridden by a definition in the fs_types stanza,
or by a command-line option provided by the user.
[fs_types]
Contains relations which define defaults that should be used for specific file
system and usage types. The file system type and usage type can be specified
explicitly using the -tand-T options to mke2fs(8), respectively.
[devices]
Contains relations which define defaults for specific devices.
THE [options] STANZA
The following relations are defined in the [options] stanza.
proceed_delay
If this relation is set to a positive integer, then mke2fs will wait proceed_delay
seconds after asking the user for permission to proceed and then continue, even if
the user has not answered the question. Defaults to 0, which means to wait until
the user answers the question one way or another.
sync_kludge
If this relation is set to a positive integer, then while writing the inode table,
mke2fs will request the operating system flush out pending writes to initialize the
inode table every sync_kludge block groups. This is needed to work around buggy
kernels that don't handle writeback throttling correctly.
THE [defaults] STANZA
The following relations are defined in the [defaults] stanza.
creator_os
This relation specifies the "creator operating system" for the file system unless
it is overridden on the command line. The default value is the OS for which the
mke2fs executable was compiled.
fs_type
This relation specifies the default file system type if the user does not specify
it via the -t option, or if mke2fs is not started using a program name of the form
mkfs.fs-type. If both the user and the mke2fs.conf file do not specify a default
file system type, mke2fs will use a default file system type of ext3 if a journal
was requested via a command-line option, or ext2 if not.
undo_dir
This relation specifies the directory where the undo file should be stored. It can
be overridden via the E2FSPROGS_UNDO_DIR environment variable. If the directory
location is set to the value none, mke2fs will not create an undo file.
In addition, any tags that can be specified in a per-file system tags subsection as
defined below (e.g., blocksize, hash_alg, inode_ratio, inode_size, reserved_ratio, etc.)
can also be specified in the defaults stanza to specify the default value to be used if
the user does not specify one on the command line, and the file system-type specific
section of the configuration file does not specify a default value.
THE [fs_types] STANZA
Each tag in the [fs_types] stanza names a file system type or usage type which can be
specified via the -t or -T options to mke2fs(8), respectively.
The mke2fs program constructs a list of fs_types by concatenating the file system type
(i.e., ext2, ext3, etc.) with the usage type list. For most configuration options, mke2fs
will look for a subsection in the [fs_types] stanza corresponding with each entry in the
constructed list, with later entries overriding earlier file system or usage types. For
example, consider the following mke2fs.conf fragment:
[defaults]
base_features = sparse_super,filetype,resize_inode,dir_index
blocksize = 4096
inode_size = 256
inode_ratio = 16384
[fs_types]
ext3 = {
features = has_journal
}
ext4 = {
features = extents,flex_bg
inode_size = 256
}
small = {
blocksize = 1024
inode_ratio = 4096
}
floppy = {
features = ^resize_inode
blocksize = 1024
inode_size = 128
}
If mke2fs started with a program name of mke2fs.ext4, then the file system type of ext4
will be used. If the file system is smaller than 3 megabytes, and no usage type is
specified, then mke2fs will use a default usage type of floppy. This results in an
fs_types list of "ext4, floppy". Both the ext4 subsection and the floppy subsection
define an inode_size relation, but since the later entries in the fs_types list supersede
earlier ones, the configuration parameter for fs_types.floppy.inode_size will be used, so
the file system will have an inode size of 128.
The exception to this resolution is the features tag, which specifies a set of changes to
the features used by the file system, and which is cumulative. So in the above example,
first the configuration relation defaults.base_features would enable an initial feature
set with the sparse_super, filetype, resize_inode, and dir_index features enabled. Then
configuration relation fs_types.ext4.features would enable the extents and flex_bg
features, and finally the configuration relation fs_types.floppy.features would remove the
resize_inode feature, resulting in a file system feature set consisting of the
sparse_super, filetype, dir_index, extents_and flex_bg features.
For each file system type, the following tags may be used in that fs_type's subsection.
These tags may also be used in the default section:
base_features
This relation specifies the features which are initially enabled for this file
system type. Only one base_features will be used, so if there are multiple entries
in the fs_types list whose subsections define the base_features relation, only the
last will be used by mke2fs(8).
enable_periodic_fsck
This boolean relation specifies whether periodic file system checks should be
enforced at boot time. If set to true, checks will be forced every 180 days, or
after a random number of mounts. These values may be changed later via the -i and
-c command-line options to tune2fs(8).
errors Change the behavior of the kernel code when errors are detected. In all cases, a
file system error will cause e2fsck(8) to check the file system on the next boot.
errors can be one of the following:
continue Continue normal execution.
remount-ro Remount file system read-only.
panic Cause a kernel panic.
features
This relation specifies a comma-separated list of features edit requests which
modify the feature set used by the newly constructed file system. The syntax is
the same as the -O command-line option to mke2fs(8); that is, a feature can be
prefixed by a caret ('^') symbol to disable a named feature. Each feature relation
specified in the fs_types list will be applied in the order found in the fs_types
list.
force_undo
This boolean relation, if set to a value of true, forces mke2fs to always try to
create an undo file, even if the undo file might be huge and it might extend the
time to create the file system image because the inode table isn't being
initialized lazily.
default_features
This relation specifies set of features which should be enabled or disabled after
applying the features listed in the base_features and features relations. It may
be overridden by the -O command-line option to mke2fs(8).
auto_64-bit_support
This relation is a boolean which specifies whether mke2fs(8) should automatically
add the 64bit feature if the number of blocks for the file system requires this
feature to be enabled. The resize_inode feature is also automatically disabled
since it doesn't support 64-bit block numbers.
default_mntopts
This relation specifies the set of mount options which should be enabled by
default. These may be changed at a later time with the -o command-line option to
tune2fs(8).
blocksize
This relation specifies the default blocksize if the user does not specify a
blocksize on the command line.
lazy_itable_init
This boolean relation specifies whether the inode table should be lazily
initialized. It only has meaning if the uninit_bg feature is enabled. If
lazy_itable_init is true and the uninit_bg feature is enabled, the inode table
will not be fully initialized by mke2fs(8). This speeds up file system
initialization noticeably, but it requires the kernel to finish initializing the
file system in the background when the file system is first mounted.
lazy_journal_init
This boolean relation specifies whether the journal inode should be lazily
initialized. It only has meaning if the has_journal feature is enabled. If
lazy_journal_init is true, the journal inode will not be fully zeroed out by
mke2fs. This speeds up file system initialization noticeably, but carries some
small risk if the system crashes before the journal has been overwritten entirely
one time.
journal_location
This relation specifies the location of the journal.
num_backup_sb
This relation indicates whether file systems with the sparse_super2 feature enabled
should be created with 0, 1, or 2 backup superblocks.
packed_meta_blocks
This boolean relation specifies whether the allocation bitmaps, inode table, and
journal should be located at the beginning of the file system.
inode_ratio
This relation specifies the default inode ratio if the user does not specify one on
the command line.
inode_size
This relation specifies the default inode size if the user does not specify one on
the command line.
reserved_ratio
This relation specifies the default percentage of file system blocks reserved for
the super-user, if the user does not specify one on the command line.
hash_alg
This relation specifies the default hash algorithm used for the new file systems
with hashed b-tree directories. Valid algorithms accepted are: legacy, half_md4,
and tea.
flex_bg_size
This relation specifies the number of block groups that will be packed together to
create one large virtual block group on an ext4 file system. This improves meta-
data locality and performance on meta-data heavy workloads. The number of groups
must be a power of 2 and may only be specified if the flex_bg file system feature
is enabled.
options
This relation specifies additional extended options which should be treated by
mke2fs(8) as if they were prepended to the argument of the -E option. This can be
used to configure the default extended options used by mke2fs(8) on a per-file
system type basis.
discard
This boolean relation specifies whether the mke2fs(8) should attempt to discard
device prior to file system creation.
cluster_size
This relation specifies the default cluster size if the bigalloc file system
feature is enabled. It can be overridden via the -C command line option to
mke2fs(8)
make_hugefiles
This boolean relation enables the creation of pre-allocated files as part of
formatting the file system. The extent tree blocks for these pre-allocated files
will be placed near the beginning of the file system, so that if all of the other
metadata blocks are also configured to be placed near the beginning of the file
system (by disabling the backup superblocks, using the packed_meta_blocks option,
etc.), the data blocks of the pre-allocated files will be contiguous.
hugefiles_dir
This relation specifies the directory where huge files are created, relative to the
file system root.
hugefiles_uid
This relation controls the user ownership for all of the files and directories
created by the make_hugefiles feature.
hugefiles_gid
This relation controls the group ownership for all of the files and directories
created by the make_hugefiles feature.
hugefiles_umask
This relation specifies the umask used when creating the files and directories by
the make_hugefiles feature.
num_hugefiles
This relation specifies the number of huge files to be created. If this relation
is not specified, or is set to zero, and the hugefiles_size relation is non-zero,
then make_hugefiles will create as many huge files as can fit to fill the entire
file system.
hugefiles_slack
This relation specifies how much space should be reserved for other files.
hugefiles_size
This relation specifies the size of the huge files. If this relation is not
specified, the default is to fill the entire file system.
hugefiles_align
This relation specifies the alignment for the start block of the huge files. It
also forces the size of huge files to be a multiple of the requested alignment. If
this relation is not specified, no alignment requirement will be imposed on the
huge files.
hugefiles_align_disk
This relations specifies whether the alignment should be relative to the beginning
of the hard drive (assuming that the starting offset of the partition is available
to mke2fs). The default value is false, which will cause hugefile alignment to be
relative to the beginning of the file system.
hugefiles_name
This relation specifies the base file name for the huge files.
hugefiles_digits
This relation specifies the (zero-padded) width of the field for the huge file
number.
warn_y2038_dates
This boolean relation specifies whether mke2fs will issue a warning when creating a
file system with 128 byte inodes (and so therefore will not support dates after
January 19th, 2038). The default value is true, except for file systems created
for the GNU Hurd since it only supports 128-byte inodes.
zero_hugefiles
This boolean relation specifies whether or not zero blocks will be written to the
hugefiles while mke2fs(8) is creating them. By default, zero blocks will be
written to the huge files to avoid stale data from being made available to
potentially untrusted user programs, unless the device supports a discard/trim
operation which will take care of zeroing the device blocks. By setting
zero_hugefiles to false, this step will always be skipped, which can be useful if
it is known that the disk has been previously erased, or if the user programs that
will have access to the huge files are trusted to not reveal stale data.
encoding
This relation defines the file name encoding to be used if the casefold feature is
enabled. Currently the only valid encoding is utf8-12.1 or utf8, which requests
the most recent Unicode version; since 12.1 is the only available Unicode version,
utf8 and utf8-12.1 have the same result. encoding_flags This relation defines
encoding-specific flags. For utf8 encodings, the only available flag is strict,
which will cause attempts to create file names containing invalid Unicode
characters to be rejected by the kernel. Strict mode is not enabled by default.
THE [devices] STANZA
Each tag in the [devices] stanza names device name so that per-device defaults can be
specified.
fs_type
This relation specifies the default parameter for the -t option, if this option
isn't specified on the command line.
usage_types
This relation specifies the default parameter for the -T option, if this option
isn't specified on the command line.
FILES
/etc/mke2fs.conf
The configuration file for mke2fs(8).
SEE ALSO
mke2fs(8)