Ubuntu Manpage: sudoers — default sudo security policy plugin

Provided by: sudo_1.9.15p5-3ubuntu5_amd64

NAME

     sudoers — default sudo security policy plugin

DESCRIPTION

The sudoers policy plugin determines a user's sudo privileges. It is the default sudo policy plugin. The
policy is driven by the /etc/sudoers file or, optionally, in LDAP. The policy format is described in
detail in the SUDOERS FILE FORMAT section. For information on storing sudoers policy information in LDAP,
see sudoers.ldap(5).

Configuring sudo.conf for sudoers
sudo consults the sudo.conf(5) file to determine which plugins to load. If no sudo.conf(5) file is
present, or if it contains no Plugin lines, sudoers will be used for auditing, policy decisions and I/O
logging. To explicitly configure sudo.conf(5) to use the sudoers plugin, the following configuration can
be used.

Plugin sudoers_audit sudoers.so
Plugin sudoers_policy sudoers.so
Plugin sudoers_io sudoers.so

Starting with sudo 1.8.5, it is possible to specify optional arguments to the sudoers plugin in the
sudo.conf(5) file. Plugin arguments, if any, should be listed after the path to the plugin (i.e., after
sudoers.so). The arguments are only effective for the plugin that opens (and parses) the sudoers file.

For sudo version 1.9.1 and higher, this is the sudoers_audit plugin. For older versions, it is the
sudoers_policy plugin. Multiple arguments may be specified, separated by white space. For example:

Plugin sudoers_audit sudoers.so sudoers_mode=0400 error_recovery=false

The following plugin arguments are supported:

error_recovery=bool
The error_recovery argument can be used to control whether sudoers should attempt to recover from
syntax errors in the sudoers file. If set to true (the default), sudoers will try to recover from a
syntax error by discarding the portion of the line that contains the error until the end of the line.
A value of false will disable error recovery. Prior to version 1.9.3, no error recovery was
performed.

ignore_perms=bool
The ignore_perms argument can be used to disable security checks when loading the sudoers file. If
enabled, the sudoers file will be loaded regardless of the owner or file mode. This argument is
intended to be used for testing purposes and should not be enabled on production systems.

ldap_conf=pathname
The ldap_conf argument can be used to override the default path to the ldap.conf file.

ldap_secret=pathname
The ldap_secret argument can be used to override the default path to the ldap.secret file.

sudoers_file=pathname
The sudoers_file argument can be used to override the default path to the sudoers file.

sudoers_uid=user-ID
The sudoers_uid argument can be used to override the default owner of the sudoers file. It should be
specified as a numeric user-ID.

sudoers_gid=group-ID
The sudoers_gid argument can be used to override the default group of the sudoers file. It must be
specified as a numeric group-ID (not a group name).

sudoers_mode=mode
The sudoers_mode argument can be used to override the default file mode for the sudoers file. It
should be specified as an octal value.

For more information on configuring sudo.conf(5), refer to its manual.

User Authentication
The sudoers security policy requires that most users authenticate themselves before they can use sudo. A
password is not required if the invoking user is root, if the target user is the same as the invoking user,
or if the policy has disabled authentication for the user or command. Unlike su(1), when sudoers requires
authentication, it validates the invoking user's credentials, not the target user's (or root's)
credentials. This can be changed via the rootpw, targetpw and runaspw flags, described later.

If a user who is not listed in the policy tries to run a command via sudo, mail is sent to the proper
authorities. The address used for such mail is configurable via the mailto Defaults entry (described
later) and defaults to root.

No mail will be sent if an unauthorized user tries to run sudo with the -l or -v option unless there is an
authentication error and either the mail_always or mail_badpass flags are enabled. This allows users to
determine for themselves whether or not they are allowed to use sudo. By default, all attempts to run sudo
(successful or not) are logged, regardless of whether or not mail is sent.

If sudo is run by root and the SUDO_USER environment variable is set, the sudoers policy will use this
value to determine who the actual user is. This can be used by a user to log commands through sudo even
when a root shell has been invoked. It also allows the -e option to remain useful even when invoked via a
sudo-run script or program. Note, however, that the sudoers file lookup is still done for root, not the
user specified by SUDO_USER.

sudoers uses per-user time stamp files for credential caching. Once a user has been authenticated, a
record is written containing the user-ID that was used to authenticate, the terminal session ID, the start
time of the session leader (or parent process) and a time stamp (using a monotonic clock if one is
available). The user may then use sudo without a password for a short period of time (15 minutes unless
overridden by the timestamp_timeout option). By default, sudoers uses a separate record for each terminal,
which means that a user's login sessions are authenticated separately. The timestamp_type option can be
used to select the type of time stamp record sudoers will use.

Logging
By default, sudoers logs both successful and unsuccessful attempts (as well as errors). The log_allowed
and log_denied flags can be used to control this behavior. Messages can be logged to syslog(3), a log
file, or both. The default is to log to syslog(3) but this is configurable via the syslog and logfile
settings. See EVENT LOGGING for a description of the log file format.

sudoers is also capable of running a command in a pseudo-terminal and logging input and/or output. The
standard input, standard output, and standard error can be logged even when not associated with a terminal.
For more information about I/O logging, see the I/O LOGGING section.

Starting with version 1.9, the log_servers setting may be used to send event and I/O log data to a remote
server running sudo_logsrvd or another service that implements the protocol described by
sudo_logsrv.proto(5).

Command environment
Since environment variables can influence program behavior, sudoers provides a means to restrict which
variables from the user's environment are inherited by the command to be run. There are two distinct ways
sudoers can deal with environment variables.

By default, the env_reset flag is enabled. This causes commands to be executed with a new, minimal
environment. On AIX (and Linux systems without PAM), the environment is initialized with the contents of
the /etc/environment file. The HOME, MAIL, SHELL, LOGNAME and USER environment variables are initialized
based on the target user and the SUDO_* variables are set based on the invoking user. Additional
variables, such as DISPLAY, PATH and TERM, are preserved from the invoking user's environment if permitted
by the env_check, or env_keep options. A few environment variables are treated specially. If the PATH and
TERM variables are not preserved from the user's environment, they will be set to default values. The
LOGNAME and USER are handled as a single entity. If one of them is preserved (or removed) from the user's
environment, the other will be as well. If LOGNAME and USER are to be preserved but only one of them is
present in the user's environment, the other will be set to the same value. This avoids an inconsistent
environment where one of the variables describing the user name is set to the invoking user and one is set
to the target user. Environment variables with a value beginning with ‘()’ are removed unless both the
name and value parts are matched by env_keep or env_check, as they may be interpreted as functions by the
bash shell. Prior to version 1.8.11, such variables were always removed.

If, however, the env_reset flag is disabled, any variables not explicitly denied by the env_check and
env_delete options are allowed and their values are inherited from the invoking process. Prior to version
1.8.21, environment variables with a value beginning with ‘()’ were always removed. Beginning with version
1.8.21, a pattern in env_delete is used to match bash shell functions instead. Since it is not possible to
block all potentially dangerous environment variables, use of the default env_reset behavior is encouraged.

Environment variables specified by env_check, env_delete, or env_keep may include one or more ‘*’
characters which will match zero or more characters. No other wildcard characters are supported.

By default, environment variables are matched by name. However, if the pattern includes an equal sign
(‘=’), both the variables name and value must match. For example, a bash shell function could be matched
as follows:

env_keep += "BASH_FUNC_my_func%%=()*"

Without the ‘=()*’ suffix, this would not match, as bash shell functions are not preserved by default.

The complete list of environment variables that are preserved or removed, as modified by global Defaults
parameters in sudoers, is displayed when sudo is run by root with the -V option. The list of environment
variables to remove varies based on the operating system sudo is running on.

Other settings may influence the command environment:

• sudoers options such as always_set_home, secure_path, set_logname, set_home, and setenv.

• Command tags, such as SETENV and NOSETENV. Note that SETENV is implied if the command matched is ALL.

• sudo options, such as -E and -i.

On systems that support PAM where the pam_env module is enabled for sudo, variables in the PAM environment
may be merged in to the environment. If a variable in the PAM environment is already present in the user's
environment, the value will only be overridden if the variable was not preserved by sudoers. When
env_reset is enabled, variables preserved from the invoking user's environment by the env_keep list take
precedence over those in the PAM environment. When env_reset is disabled, variables present the invoking
user's environment take precedence over those in the PAM environment unless they match a pattern in the
env_delete list.

The dynamic linker on most operating systems will remove variables that can control dynamic linking from
the environment of set-user-ID executables, including sudo. Depending on the operating system this may
include _RLD*, DYLD_*, LD_*, LDR_*, LIBPATH, SHLIB_PATH, and others. These type of variables are removed
from the environment before sudo even begins execution and, as such, it is not possible for sudo to
preserve them.

As a special case, if the -i option (initial login) is specified, sudoers will initialize the environment
regardless of the value of env_reset. The DISPLAY, PATH and TERM variables remain unchanged; HOME, MAIL,
SHELL, USER, and LOGNAME are set based on the target user. On AIX (and Linux systems without PAM), the
contents of /etc/environment are also included. All other environment variables are removed unless
permitted by env_keep or env_check, described above.

Finally, the restricted_env_file and env_file files are applied, if present. The variables in
restricted_env_file are applied first and are subject to the same restrictions as the invoking user's
environment, as detailed above. The variables in env_file are applied last and are not subject to these
restrictions. In both cases, variables present in the files will only be set to their specified values if
they would not conflict with an existing environment variable.

SUDOERS FILE FORMAT

The sudoers file is composed of two types of entries: aliases (basically variables) and user specifications
(which specify who may run what).

When multiple entries match for a user, they are applied in order. Where there are multiple matches, the
last match is used (which is not necessarily the most specific match).

The sudoers file grammar will be described below in Extended Backus-Naur Form (EBNF). Don't despair if you
are unfamiliar with EBNF; it is fairly simple, and the definitions below are annotated.

Resource limits
By default, sudoers uses the operating system's native method of setting resource limits for the target
user. On Linux systems, resource limits are usually set by the pam_limits.so PAM module. On some BSD
systems, the /etc/login.conf file specifies resource limits for the user. On AIX systems, resource limits
are configured in the /etc/security/limits file. If there is no system mechanism to set per-user resource
limits, the command will run with the same limits as the invoking user. The one exception to this is the
core dump file size, which is set by sudoers to 0 by default. Disabling core dumps by default makes it
possible to avoid potential security problems where the core file is treated as trusted input.

Resource limits may also be set in the sudoers file itself, in which case they override those set by the
system. See the rlimit_as, rlimit_core, rlimit_cpu, rlimit_data, rlimit_fsize, rlimit_locks,
rlimit_memlock, rlimit_nofile, rlimit_nproc, rlimit_rss, rlimit_stack options described below. Resource
limits in sudoers may be specified in one of the following formats:

“value”
Both the soft and hard resource limits are set to the same value. The special value “infinity” can
be used to indicate that the value is unlimited.

“soft,hard”
Two comma-separated values. The soft limit is set to the first value and the hard limit is set to
the second. Both values must either be enclosed in a set of double quotes, or the comma must be
escaped with a backslash (‘\’). The special value “infinity” may be used in place of either value.

“default”
The default resource limit for the user will be used. This may be a user-specific value (see
above) or the value of the resource limit when sudo was invoked for systems that don't support per-
user limits.

“user” The invoking user's resource limits will be preserved when running the command.

For example, to restore the historic core dump file size behavior, a line like the following may be used.

Defaults rlimit_core=default

Resource limits in sudoers are only supported by version 1.8.7 or higher.

Quick guide to EBNF
EBNF is a concise and exact way of describing the grammar of a language. Each EBNF definition is made up
of production rules. For example:

symbol ::= definition | alternate1 | alternate2 ...

Each production rule references others and thus makes up a grammar for the language. EBNF also contains
the following operators, which many readers will recognize from regular expressions. Do not, however,
confuse them with “wildcard” characters, which have different meanings.

? Means that the preceding symbol (or group of symbols) is optional. That is, it may appear once or
not at all.

* Means that the preceding symbol (or group of symbols) may appear zero or more times.

+ Means that the preceding symbol (or group of symbols) may appear one or more times.

Parentheses may be used to group symbols together. For clarity, we will use single quotes ('') to
designate what is a verbatim character string (as opposed to a symbol name).

Aliases
There are four kinds of aliases: User_Alias, Runas_Alias, Host_Alias and Cmnd_Alias. Beginning with sudo
1.9.0, Cmd_Alias may be used in place of Cmnd_Alias if desired.

Alias ::= 'User_Alias' User_Alias_Spec (':' User_Alias_Spec)* |
'Runas_Alias' Runas_Alias_Spec (':' Runas_Alias_Spec)* |
'Host_Alias' Host_Alias_Spec (':' Host_Alias_Spec)* |
'Cmnd_Alias' Cmnd_Alias_Spec (':' Cmnd_Alias_Spec)* |
'Cmd_Alias' Cmnd_Alias_Spec (':' Cmnd_Alias_Spec)*

User_Alias ::= NAME

User_Alias_Spec ::= User_Alias '=' User_List

Runas_Alias ::= NAME

Runas_Alias_Spec ::= Runas_Alias '=' Runas_List

Host_Alias ::= NAME

Host_Alias_Spec ::= Host_Alias '=' Host_List

Cmnd_Alias ::= NAME

Cmnd_Alias_Spec ::= Cmnd_Alias '=' Cmnd_List

NAME ::= [A-Z]([A-Z][0-9]_)*

Each alias definition is of the form

Alias_Type NAME = item1, item2, ...

where Alias_Type is one of User_Alias, Runas_Alias, Host_Alias, or Cmnd_Alias. A NAME is a string of
uppercase letters, numbers, and underscore characters (‘_’). A NAME must start with an uppercase letter.
It is possible to put several alias definitions of the same type on a single line, joined by a colon (‘:’).
For example:

Alias_Type NAME = item1, item2, item3 : NAME = item4, item5

It is a syntax error to redefine an existing alias. It is possible to use the same name for aliases of
different types, but this is not recommended.

The definitions of what constitutes a valid alias member follow.

User_List ::= User |
User ',' User_List

A User_List is made up of one or more user names, user-IDs (prefixed with ‘#’), system group names and IDs
(prefixed with ‘%’ and ‘%#’ respectively), netgroups (prefixed with ‘+’), non-Unix group names and IDs
(prefixed with ‘%:’ and ‘%:#’ respectively), and User_Aliases. Each list item may be prefixed with zero or
more ‘!’ operators. An odd number of ‘!’ operators negate the value of the item; an even number just
cancel each other out. User netgroups are matched using the user and domain members only; the host member
is not used when matching.

A user name, user-ID, group, group-ID, netgroup, nonunix_group or nonunix_gid may be enclosed in double
quotes to avoid the need for escaping special characters. Alternately, special characters may be specified
in escaped hex mode, e.g., \x20 for space. When using double quotes, any prefix characters must be
included inside the quotes.

The actual nonunix_group and nonunix_gid syntax depends on the underlying group provider plugin. For
instance, the QAS AD plugin supports the following formats:

• Group in the same domain: "%:Group Name"

• Group in any domain: "%:Group Name@FULLY.QUALIFIED.DOMAIN"

• Group SID: "%:S-1-2-34-5678901234-5678901234-5678901234-567"

See GROUP PROVIDER PLUGINS for more information.

Quotes around group names are optional. Unquoted strings must use a backslash (‘\’) to escape spaces and
special characters. See Other special characters and reserved words for a list of characters that need to
be escaped.

Runas_List ::= Runas_Member |
Runas_Member ',' Runas_List

A Runas_List is similar to a User_List except that instead of User_Aliases it can contain Runas_Aliases.
User names and groups are matched as strings. In other words, two users (groups) with the same user
(group) ID are considered to be distinct. If you wish to match all user names with the same user-ID (e.g.,
root and toor), you can use a user-ID instead of a name (#0 in the example given). The user-ID or group-ID
specified in a Runas_Member need not be listed in the password or group database.

Host_List ::= Host |
Host ',' Host_List

A Host_List is made up of one or more host names, IP addresses, network numbers, netgroups (prefixed with
‘+’), and other aliases. Again, the value of an item may be negated with the ‘!’ operator. Host netgroups
are matched using the host (both qualified and unqualified) and domain members only; the user member is not
used when matching. If you specify a network number without a netmask, sudo will query each of the local
host's network interfaces and, if the network number corresponds to one of the hosts's network interfaces,
will use the netmask of that interface. The netmask may be specified either in standard IP address
notation (e.g., 255.255.255.0 or ffff:ffff:ffff:ffff::), or CIDR notation (number of bits, e.g., 24 or 64).
A host name may include shell-style wildcards (see the Wildcards section below), but unless the hostname
command on your machine returns the fully qualified host name, you'll need to use the fqdn flag for
wildcards to be useful. sudo only inspects actual network interfaces; this means that IP address 127.0.0.1
(localhost) will never match. Also, the host name “localhost” will only match if that is the actual host
name, which is usually only the case for non-networked systems.

digest ::= [A-Fa-f0-9]+ |
[A-Za-z0-9\+/=]+

Digest_Spec ::= "sha224" ':' digest |
"sha256" ':' digest |
"sha384" ':' digest |
"sha512" ':' digest

Digest_List ::= Digest_Spec |
Digest_Spec ',' Digest_List

Cmnd_List ::= Cmnd |
Cmnd ',' Cmnd_List

command name ::= regex |
file name

command ::= command name |
command name args |
command name regex |
command name '""' |
ALL

Edit_Spec ::= "sudoedit" file name+ |
"sudoedit" regex |
"sudoedit"

List_Spec ::= "list"

Cmnd ::= Digest_List? '!'* command |
'!'* directory |
'!'* Edit_Spec |
'!'* List_Spec |
'!'* Cmnd_Alias

A Cmnd_List is a list of one or more commands, directories, or aliases. A command is a fully qualified
file name, which may include shell-style wildcards (see the Wildcards section below), or a regular
expression that starts with ‘^’ and ends with ‘$’ (see the Regular expressions section below). A directory
is a fully qualified path name ending in a ‘/’. When you specify a directory in a Cmnd_List, the user will
be able to run any file within that directory (but not in any sub-directories therein). If no command line
arguments are specified, the user may run the command with any arguments they choose. Command line
arguments can include wildcards or be a regular expression that starts with ‘^’ and ends with ‘$’. If the
command line arguments consist of ‘""’, the command may only be run with no arguments.

If a Cmnd has associated command line arguments, the arguments in the Cmnd must match those given by the
user on the command line. If the arguments in a Cmnd begin with the ‘^’ character, they will be
interpreted as a regular expression and matched accordingly. Otherwise, shell-style wildcards are used
when matching. Unless a regular expression is specified, the following characters must be escaped with a
‘\’ if they are used in command arguments: ‘,’, ‘:’, ‘=’, ‘\’. To prevent arguments in a Cmnd that begin
with a ‘^’ character from being interpreted as a regular expression, the ‘^’ must be escaped with a ‘\’.

There are two commands built into sudo itself: “list” and “sudoedit”. Unlike other commands, these two
must be specified in the sudoers file without a leading path.

The “list” built-in can be used to permit a user to list another user's privileges with sudo's -U option.
For example, “sudo -l -U otheruser”. A user with the “list” privilege is able to list another user's
privileges even if they don't have permission to run commands as that user. By default, only root or a
user with the ability to run any command as either root or the specified user on the current host may use
the -U option. No command line arguments may be specified with the “list” built-in.

The “sudoedit” built-in is used to permit a user to run sudo with the -e option (or as sudoedit). It may
take command line arguments just as a normal command does. Unlike other commands, “sudoedit” is built into
sudo itself and must be specified in the sudoers file without a leading path. If a leading path is
present, for example /usr/bin/sudoedit, the path name will be silently converted to “sudoedit”. A fully-
qualified path for sudoedit is treated as an error by visudo.

A command may be preceded by a Digest_List, a comma-separated list of one or more Digest_Spec entries. If
a Digest_List is present, the command will only match successfully if it can be verified using one of the
SHA-2 digests in the list. Starting with version 1.9.0, the ALL reserved word can be used in conjunction
with a Digest_List. The following digest formats are supported: sha224, sha256, sha384, and sha512. The
string may be specified in either hex or base64 format (base64 is more compact). There are several
utilities capable of generating SHA-2 digests in hex format such as openssl, shasum, sha224sum, sha256sum,
sha384sum, sha512sum.

For example, using openssl:

$ openssl dgst -sha224 /bin/ls
SHA224(/bin/ls)= 118187da8364d490b4a7debbf483004e8f3e053ec954309de2c41a25

It is also possible to use openssl to generate base64 output:

$ openssl dgst -binary -sha224 /bin/ls | openssl base64
EYGH2oNk1JC0p9679IMATo8+BT7JVDCd4sQaJQ==

Warning, if the user has write access to the command itself (directly or via a sudo command), it may be
possible for the user to replace the command after the digest check has been performed but before the
command is executed. A similar race condition exists on systems that lack the fexecve(2) system call when
the directory in which the command is located is writable by the user. See the description of the fdexec
setting for more information on how sudo executes commands that have an associated digest.

Command digests are only supported by version 1.8.7 or higher.

Defaults
Certain configuration options may be changed from their default values at run-time via one or more
Default_Entry lines. These may affect all users on any host (‘Defaults’), all users on a specific host
(‘Defaults@host’), a specific user (‘Defaults:user’), a specific command (‘Defaults!cmnd’), or commands
being run as a specific user (‘Defaults>runasuser’).

White space is not permitted between ‘Defaults’ and the ‘@’, ‘:’, ‘!’, or ‘>’ characters. While a comma-
separated list may be used in place of a single value after the ‘@’, ‘:’, ‘!’, or ‘>’ character, using an
alias instead of a list is often improve readability. Per-command entries may not include command line
arguments. If you need to specify arguments, define a Cmnd_Alias and reference that instead.

Default_Type ::= 'Defaults' |
'Defaults@' Host_List |
'Defaults:' User_List |
'Defaults!' Cmnd_List |
'Defaults>' Runas_List

Default_Entry ::= Default_Type Parameter_List

Parameter_List ::= Parameter |
Parameter ',' Parameter_List

Parameter ::= Parameter '=' Value |
Parameter '+=' Value |
Parameter '-=' Value |
'!'* Parameter

Parameters may be flags, integer values, strings, or lists. Flags are implicitly boolean and can be turned
off via the ‘!’ operator. Some integer, string and list parameters may also be used in a boolean context
to disable them. Values may be enclosed in double quotes ("") when they contain multiple words. Special
characters may be escaped with a backslash (‘\’).

To include a literal backslash character in a command line argument you must escape the backslash twice.
For example, to match ‘\n’ as part of a command line argument, you must use ‘\\\\n’ in the sudoers file.
This is due to there being two levels of escaping, one in the sudoers parser itself and another when
command line arguments are matched by the fnmatch(3) or regexec(3) function.

Lists have two additional assignment operators, ‘+=’ and ‘-=’. These operators are used to add to and
delete from a list respectively. It is not an error to use the ‘-=’ operator to remove an element that
does not exist in a list.

Defaults entries are parsed in the following order: global, host, user, and runas Defaults first, then
command defaults. If there are multiple Defaults settings of the same type, the last matching setting is
used. The following Defaults settings are parsed before all others since they may affect subsequent
entries: fqdn, group_plugin, runas_default, sudoers_locale.

See SUDOERS OPTIONS for a list of supported Defaults parameters.

User specification
User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \
(':' Host_List '=' Cmnd_Spec_List)*

Cmnd_Spec_List ::= Cmnd_Spec |
Cmnd_Spec ',' Cmnd_Spec_List

Cmnd_Spec ::= Runas_Spec? Option_Spec* (Tag_Spec ':')* Cmnd

Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')'

Option_Spec ::= (SELinux_Spec | Date_Spec | Timeout_Spec | Chdir_Spec | Chroot_Spec)

SELinux_Spec ::= ('ROLE=role' | 'TYPE=type')

AppArmor_Spec ::= 'APPARMOR_PROFILE=profile'

Date_Spec ::= ('NOTBEFORE=timestamp' | 'NOTAFTER=timestamp')

Timeout_Spec ::= 'TIMEOUT=timeout'

Chdir_Spec ::= 'CWD=directory'

Chroot_Spec ::= 'CHROOT=directory'

A user specification determines which commands a user may run (and as what user) on specified hosts. By
default, commands are run as root (unless runas_default has been set to a different value) but this can
also be changed on a per-command basis.

The basic structure of a user specification is “who where = (as_whom) what”. Let's break that down into
its constituent parts:

Runas_Spec
A Runas_Spec determines the user and/or the group that a command may be run as. A fully-specified
Runas_Spec consists of two Runas_Lists (as defined above) separated by a colon (‘:’) and enclosed in a set
of parentheses. The first Runas_List indicates which users the command may be run as via the -u option.
The second defines a list of groups that may be specified via the -g option (in addition to any of the
target user's groups). If both Runas_Lists are specified, the command may be run with any combination of
users and groups listed in their respective Runas_Lists. If only the first is specified, the command may be
run as any user in the list and, optionally, with any group the target user belongs to. If the first
Runas_List is empty but the second is specified, the command may be run as the invoking user with the group
set to any listed in the Runas_List. If both Runas_Lists are empty, the command may only be run as the
invoking user and the group, if specified, must be one that the invoking user is a member of. If no
Runas_Spec is specified, the command may only be run as the runas_default user (root by default) and the
group, if specified, must be one that the runas_default user is a member of.

A Runas_Spec sets the default for the commands that follow it. What this means is that for the entry:

dgb boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm

The user dgb may run /bin/ls, /bin/kill, and /usr/bin/lprm on the host boulder—but only as operator. For
example:

$ sudo -u operator /bin/ls

It is also possible to override a Runas_Spec later on in an entry. If we modify the entry like so:

dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm

Then user dgb is now allowed to run /bin/ls as operator, but /bin/kill and /usr/bin/lprm as root.

We can extend this to allow dgb to run /bin/ls with either the user or group set to operator:

dgb boulder = (operator : operator) /bin/ls, (root) /bin/kill,\
/usr/bin/lprm

While the group portion of the Runas_Spec permits the user to run as command with that group, it does not
force the user to do so. If no group is specified on the command line, the command will run with the group
listed in the target user's password database entry. The following would all be permitted by the sudoers
entry above:

$ sudo -u operator /bin/ls
$ sudo -u operator -g operator /bin/ls
$ sudo -g operator /bin/ls

In the following example, user tcm may run commands that access a modem device file with the dialer group.

tcm boulder = (:dialer) /usr/bin/tip, /usr/bin/cu,\
/usr/local/bin/minicom

In this example only the group will be set, the command still runs as user tcm. For example:

$ sudo -g dialer /usr/bin/cu

Multiple users and groups may be present in a Runas_Spec, in which case the user may select any combination
of users and groups via the -u and -g options. In this example:

alan ALL = (root, bin : operator, system) ALL

user alan may run any command as either user root or bin, optionally setting the group to operator or
system.

Option_Spec
A Cmnd may have zero or more options associated with it. Options may consist of SELinux roles and/or
types, AppArmor profiles, start and/or end dates and command timeouts. Once an option is set for a Cmnd,
subsequent Cmnds in the Cmnd_Spec_List, inherit that option unless it is overridden by another option.
Option names are reserved words in sudoers. This means that none of the valid option names (see below) can
be used when declaring an alias.

SELinux_Spec
On systems with SELinux support, sudoers file entries may optionally have an SELinux role and/or type
associated with a command. This can be used to implement a form of role-based access control (RBAC). If a
role or type is specified with the command it will override any default values specified in sudoers. A
role or type specified on the command line, however, will supersede the values in sudoers.

AppArmor_Spec
On systems supporting AppArmor, sudoers file entries may optionally specify an AppArmor profile that should
be used to confine a command. If an AppArmor profile is specified with the command, it will override any
default values specified in sudoers. Appropriate profile transition rules must be defined to support the
profile change specified for a user.

AppArmor profiles can be specified in any way that complies with the rules of aa_change_profile(2). For
instance, in the following sudoers entry

alice ALL = (root) APPARMOR_PROFILE=my-profile ALL

the user alice may run any command as root under confinement by the profile ‘my-profile’. You can also
stack profiles, or allow a user to run commands unconfined by any profile. For example:

bob ALL = (root) APPARMOR_PROFILE=foo//&bar /usr/bin/vi
cathy ALL = (root) APPARMOR_PROFILE=unconfined /bin/ls

These sudoers entries allow user bob to run /usr/bin/vi as root under the stacked profiles ‘foo’ and ‘bar’,
and user cathy to run /bin/ls without any confinement at all.

Date_Spec
sudoers rules can be specified with a start and end date via the NOTBEFORE and NOTAFTER settings. The time
stamp must be specified in “Generalized Time” as defined by RFC 4517. The format is effectively
‘yyyymmddHHMMSSZ’ where the minutes and seconds are optional. The ‘Z’ suffix indicates that the time stamp
is in Coordinated Universal Time (UTC). It is also possible to specify a timezone offset from UTC in hours
and minutes instead of a ‘Z’. For example, ‘-0500’ would correspond to Eastern Standard time in the US.
As an extension, if no ‘Z’ or timezone offset is specified, local time will be used.

The following are all valid time stamps:

20170214083000Z
2017021408Z
20160315220000-0500
20151201235900

Timeout_Spec
A command may have a timeout associated with it. If the timeout expires before the command has exited, the
command will be terminated. The timeout may be specified in combinations of days, hours, minutes, and
seconds with a single-letter case-insensitive suffix that indicates the unit of time. For example, a
timeout of 7 days, 8 hours, 30 minutes, and 10 seconds would be written as ‘7d8h30m10s’. If a number is
specified without a unit, seconds are assumed. Any of the days, minutes, hours, or seconds may be omitted.
The order must be from largest to smallest unit and a unit may not be specified more than once.

The following are all valid timeout values: ‘7d8h30m10s’, ‘14d’, ‘8h30m’, ‘600s’, ‘3600’. The following
are invalid timeout values: ‘12m2w1d’, ‘30s10m4h’, ‘1d2d3h’.

This setting is only supported by version 1.8.20 or higher.

Chdir_Spec
The working directory that the command will be run in can be specified using the CWD setting. The
directory must be a fully-qualified path name beginning with a ‘/’ or ‘~’ character, or the special value
“*”. A value of “*” indicates that the user may specify the working directory by running sudo with the -D
option. By default, commands are run from the invoking user's current working directory, unless the -i
option is given. Path names of the form ~user/path/name are interpreted as being relative to the named
user's home directory. If the user name is omitted, the path will be relative to the runas user's home
directory.

This setting is only supported by version 1.9.3 or higher.

Chroot_Spec
The root directory that the command will be run in can be specified using the CHROOT setting. The
directory must be a fully-qualified path name beginning with a ‘/’ or ‘~’ character, or the special value
“*”. A value of “*” indicates that the user may specify the root directory by running sudo with the -R
option. This setting can be used to run the command in a chroot(2) “sandbox” similar to the chroot(8)
utility. Path names of the form ~user/path/name are interpreted as being relative to the named user's home
directory. If the user name is omitted, the path will be relative to the runas user's home directory.

This setting is only supported by version 1.9.3 or higher.

Tag_Spec
A command may have zero or more tags associated with it. The following tag values are supported: EXEC,
NOEXEC, FOLLOW, NOFOLLOW, LOG_INPUT, NOLOG_INPUT, LOG_OUTPUT, NOLOG_OUTPUT, MAIL, NOMAIL, INTERCEPT,
NOINTERCEPT, PASSWD, NOPASSWD, SETENV, and NOSETENV. Once a tag is set on a Cmnd, subsequent Cmnds in the
Cmnd_Spec_List, inherit the tag unless it is overridden by the opposite tag (in other words, PASSWD
overrides NOPASSWD and NOEXEC overrides EXEC).

EXEC and NOEXEC

If sudo has been compiled with noexec support and the underlying operating system supports it, the NOEXEC
tag can be used to prevent a dynamically-linked executable from running further commands itself.

In the following example, user aaron may run /usr/bin/more and /usr/bin/vi on the host shanty, but shell
escapes will be disabled.

aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi

See the Preventing shell escapes section below for more details on how NOEXEC works and whether or not it
will work on your system.

FOLLOW and NOFOLLOW

Starting with version 1.8.15, sudoedit will not open a file that is a symbolic link unless the
sudoedit_follow flag is enabled. The FOLLOW and NOFOLLOW tags override the value of sudoedit_follow and
can be used to permit (or deny) the editing of symbolic links on a per-command basis. These tags are
only effective for the sudoedit command and are ignored for all other commands.

LOG_INPUT and NOLOG_INPUT

These tags override the value of the log_input flag on a per-command basis. For more information, see
I/O LOGGING.

LOG_OUTPUT and NOLOG_OUTPUT

These tags override the value of the log_output flag on a per-command basis. For more information, see
I/O LOGGING.

MAIL and NOMAIL

These tags provide fine-grained control over whether mail will be sent when a user runs a command by
overriding the value of the mail_all_cmnds flag on a per-command basis. They have no effect when sudo is
run with the -l or -v options. A NOMAIL tag will also override the mail_always and mail_no_perms
options. For more information, see the descriptions of mail_all_cmnds, mail_always, and mail_no_perms in
the SUDOERS OPTIONS section below.

PASSWD and NOPASSWD

By default, sudo requires that a user authenticate before running a command. This behavior can be
modified via the NOPASSWD tag. Like a Runas_Spec, the NOPASSWD tag sets a default for the commands that
follow it in the Cmnd_Spec_List. Conversely, the PASSWD tag can be used to reverse things. For example:

ray rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm

would allow the user ray to run /bin/kill, /bin/ls, and /usr/bin/lprm as root on the machine “rushmore”
without authenticating himself. If we only want ray to be able to run /bin/kill without a password the
entry would be:

ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm

Note, however, that the PASSWD tag has no effect on users who are in the group specified by the
exempt_group setting.

By default, if the NOPASSWD tag is applied to any of a user's entries for the current host, the user will
be able to run ‘sudo -l’ without a password. Additionally, a user may only run ‘sudo -v’ without a
password if all of the user's entries for the current host have the NOPASSWD tag. This behavior may be
overridden via the verifypw and listpw options.

SETENV and NOSETENV

These tags override the value of the setenv flag on a per-command basis. If SETENV has been set for a
command, the user may disable the env_reset flag from the command line via the -E option. Additionally,
environment variables set on the command line are not subject to the restrictions imposed by env_check,
env_delete, or env_keep. As such, only trusted users should be allowed to set variables in this manner.
If the command matched is ALL, the SETENV tag is implied for that command; this default may be overridden
by use of the NOSETENV tag.

INTERCEPT and NOINTERCEPT

If sudo has been compiled with intercept support and the underlying operating system supports it, the
INTERCEPT tag can be used to cause programs spawned by a command to be validated against sudoers and
logged just like they would be if run through sudo directly. This is useful in conjunction with commands
that allow shell escapes such as editors, shells, and paginators. There is additional overhead due to
the policy check that may add latency when running commands such as shell scripts that execute a large
number of sub-commands. For interactive commands, such as a shell or editor, the overhead is not usually
noticeable.

In the following example, user chuck may run any command on the machine “research” in intercept mode.

chuck research = INTERCEPT: ALL

See the Preventing shell escapes section below for more details on how INTERCEPT works and whether or not
it will work on your system.

Wildcards
sudo allows shell-style wildcards (aka meta or glob characters) to be used in host names, path names, and
command line arguments in the sudoers file. Wildcard matching is done via the glob(3) and fnmatch(3)
functions as specified by IEEE Std 1003.1 (“POSIX.1”).

* Matches any set of zero or more characters (including white space).

? Matches any single character (including white space).

[...] Matches any character in the specified range.

[!...] Matches any character not in the specified range.

\x For any character ‘x’, evaluates to ‘x’. This is used to escape special characters such as: ‘*’,
‘?’, ‘[’, and ‘]’.

These are not regular expressions. Unlike a regular expression there is no way to match one or more
characters within a range.

Character classes may be used if your system's glob(3) and fnmatch(3) functions support them. However,
because the ‘:’ character has special meaning in sudoers, it must be escaped. For example:

/bin/ls [[\:alpha\:]]*

Would match any file name beginning with a letter.

A forward slash (‘/’) will not be matched by wildcards used in the file name portion of the command. This
is to make a path like:

/usr/bin/*

match /usr/bin/who but not /usr/bin/X11/xterm.

When matching the command line arguments, however, a slash does get matched by wildcards since command line
arguments may contain arbitrary strings and not just path names.

Wildcards in command line arguments should be used with care.
Wildcards can match any character, including white space. In most cases, it is safer to use a regular
expression to match command line arguments. For more information, see Wildcards in command arguments
below.

Exceptions to wildcard rules
The following exceptions apply to the above rules:

"" If the empty string ‘""’ is the only command line argument in the sudoers file entry it means
that command is not allowed to be run with any arguments.

sudoedit Command line arguments to the sudoedit built-in command should always be path names, so a forward
slash (‘/’) will not be matched by a wildcard.

Regular expressions
Starting with version 1.9.10, it is possible to use regular expressions for path names and command line
arguments. Regular expressions are more expressive than shell-style wildcards and are usually safer
because they provide a greater degree of control when matching. The type of regular expressions supported
by sudoers are POSIX extended regular expressions, similar to those used by the egrep(1) utility. They are
usually documented in the regex(7) or re_format(7) manual, depending on the system. As an extension, if
the regular expression begins with “(?i)”, it will be matched in a case-insensitive manner.

In sudoers, regular expressions must start with a ‘^’ character and end with a ‘$’. This makes it explicit
what is, or is not, a regular expression. Either the path name, the command line arguments or both may be
regular expressions. Because the path name and arguments are matched separately, it is even possible to
use wildcards for the path name and regular expressions for the arguments. It is not possible to use a
single regular expression to match both the command and its arguments. Regular expressions in sudoers are
limited to 1024 characters.

There is no need to escape sudoers special characters in a regular expression other than the pound sign
(‘#’).

In the following example, user john can run the passwd(1) command as root on any host but is not allowed to
change root's password. This kind of rule is impossible to express safely using wildcards.

john ALL = /usr/bin/passwd ^[a-zA-Z0-9_]+$,\
!/usr/bin/passwd root

It is also possible to use a regular expression in conjunction with sudoedit rules. The following rule
would give user bob the ability to edit the /etc/motd, /etc/issue, and /etc/hosts files only.

bob ALL = sudoedit ^/etc/(motd|issue|hosts)$

Regular expressions may also be used to match the command itself. In this example, a regular expression is
used to allow user sid to run the /usr/sbin/groupadd, /usr/sbin/groupmod, /usr/sbin/groupdel,
/usr/sbin/useradd, /usr/sbin/usermod, and /usr/sbin/userdel commands as root.

sid ALL = ^/usr/sbin/(group|user)(add|mod|del)$

One disadvantage of using a regular expression to match the command name is that it is not possible to
match relative paths such as ./useradd or ../sbin/useradd. This has security implications when a regular
expression is used for the command name in conjunction with the negation operator, ‘!’, as such rules can
be trivially bypassed. Because of this, using a negated regular expression for the command name is
strongly discouraged. This does not apply to negated commands that only use a regular expression to match
the command arguments. See Regular expressions in command names below for more information.

Including other files from within sudoers
It is possible to include other sudoers files from within the sudoers file currently being parsed using the
@include and @includedir directives. For compatibility with sudo versions prior to 1.9.1, #include and
#includedir are also accepted.

An include file can be used, for example, to keep a site-wide sudoers file in addition to a local, per-
machine file. For the sake of this example the site-wide sudoers file will be /etc/sudoers and the per-
machine one will be /etc/sudoers.local. To include /etc/sudoers.local from within /etc/sudoers one would
use the following line in /etc/sudoers:

@include /etc/sudoers.local

When sudo reaches this line it will suspend processing of the current file (/etc/sudoers) and switch to
/etc/sudoers.local. Upon reaching the end of /etc/sudoers.local, the rest of /etc/sudoers will be
processed. Files that are included may themselves include other files. A hard limit of 128 nested include
files is enforced to prevent include file loops.

Starting with version 1.9.1, the path to the include file may contain white space if it is escaped with a
backslash (‘\’). Alternately, the entire path may be enclosed in double quotes (""), in which case no
escaping is necessary. To include a literal backslash in the path, ‘\\’ should be used.

If the path to the include file is not fully-qualified (does not begin with a ‘/’), it must be located in
the same directory as the sudoers file it was included from. For example, if /etc/sudoers contains the
line:

@include sudoers.local

the file that will be included is /etc/sudoers.local.

The file name may also include the ‘%h’ escape, signifying the short form of the host name. In other
words, if the machine's host name is “xerxes”, then

@include /etc/sudoers.%h

will cause sudo to include the file /etc/sudoers.xerxes. Any path name separator characters (‘/’) present
in the host name will be replaced with an underbar (‘_’) during expansion.

The @includedir directive can be used to create a sudoers.d directory that the system package manager can
drop sudoers file rules into as part of package installation. For example, given:

@includedir /etc/sudoers.d

sudo will suspend processing of the current file and read each file in /etc/sudoers.d, skipping file names
that end in ‘~’ or contain a ‘.’ character to avoid causing problems with package manager or editor
temporary/backup files.

Files are parsed in sorted lexical order. That is, /etc/sudoers.d/01_first will be parsed before
/etc/sudoers.d/10_second. Be aware that because the sorting is lexical, not numeric,
/etc/sudoers.d/1_whoops would be loaded after /etc/sudoers.d/10_second. Using a consistent number of
leading zeroes in the file names can be used to avoid such problems. After parsing the files in the
directory, control returns to the file that contained the @includedir directive.

Unlike files included via @include, visudo will not edit the files in a @includedir directory unless one of
them contains a syntax error. It is still possible to run visudo with the -f flag to edit the files
directly, but this will not catch the redefinition of an alias that is also present in a different file.

Other special characters and reserved words
The pound sign (‘#’) is used to indicate a comment (unless it is part of a #include directive or unless it
occurs in the context of a user name and is followed by one or more digits, in which case it is treated as
a user-ID). Both the comment character and any text after it, up to the end of the line, are ignored.

The reserved word ALL is a built-in alias that always causes a match to succeed. It can be used wherever
one might otherwise use a Cmnd_Alias, User_Alias, Runas_Alias, or Host_Alias. Attempting to define an
alias named ALL will result in a syntax error. Using ALL can be dangerous since in a command context, it
allows the user to run any command on the system.

The following option names permitted in an Option_Spec are also considered reserved words: CHROOT, ROLE,
TYPE, TIMEOUT, CWD, NOTBEFORE and NOTAFTER. Attempting to define an alias with the same name as one of the
options will result in a syntax error.

An exclamation point (‘!’) can be used as a logical not operator in a list or alias as well as in front of
a Cmnd. This allows one to exclude certain values. For the ‘!’ operator to be effective, there must be
something for it to exclude. For example, to match all users except for root one would use:

ALL, !root

If the ALL, is omitted, as in:

!root

it would explicitly deny root but not match any other users. This is different from a true “negation”
operator.

Note, however, that using a ‘!’ in conjunction with the built-in ALL alias to allow a user to run “all but
a few” commands rarely works as intended (see SECURITY NOTES below).

Long lines can be continued with a backslash (‘\’) as the last character on the line.

White space between elements in a list as well as special syntactic characters in a User Specification
(‘=’, ‘:’, ‘(’, ‘)’) is optional.

The following characters must be escaped with a backslash (‘\’) when used as part of a word (e.g., a user
name or host name): ‘!’, ‘=’, ‘:’, ‘,’, ‘(’, ‘)’, ‘\’.

SUDOERS OPTIONS

sudo's behavior can be modified by Default_Entry lines, as explained earlier. A list of all supported
Defaults parameters, grouped by type, are listed below.

Boolean Flags:

always_query_group_plugin
If a group_plugin is configured, use it to resolve groups of the form ‘%group’ as long as
there is not also a system group of the same name. Normally, only groups of the form
‘%:group’ are passed to the group_plugin. This flag is off by default.

always_set_home If enabled, sudo will set the HOME environment variable to the home directory of the
target user (which is the runas_default user unless the -u option is used). This flag is
largely obsolete and has no effect unless the env_reset flag has been disabled or HOME is
present in the env_keep list, both of which are strongly discouraged. This flag is off
by default.

authenticate If set, users must authenticate themselves via a password (or other means of
authentication) before they may run commands. This default may be overridden via the
PASSWD and NOPASSWD tags. This flag is on by default.

case_insensitive_group
If enabled, group names in sudoers will be matched in a case insensitive manner. This
may be necessary when users are stored in LDAP or AD. This flag is on by default.

case_insensitive_user
If enabled, user names in sudoers will be matched in a case insensitive manner. This may
be necessary when groups are stored in LDAP or AD. This flag is on by default.

closefrom_override
If set, the user may use the -C option which overrides the default starting point at
which sudo begins closing open file descriptors. This flag is off by default.

compress_io If set, and sudo is configured to log a command's input or output, the I/O logs will be
compressed using zlib. This flag is on by default when sudo is compiled with zlib
support.

exec_background By default, sudo runs a command as the foreground process as long as sudo itself is
running in the foreground. When the exec_background flag is enabled and the command is
being run in a pseudo-terminal (due to I/O logging or the use_pty flag), the command will
be run as a background process. Attempts to read from the controlling terminal (or to
change terminal settings) will result in the command being suspended with the SIGTTIN
signal (or SIGTTOU in the case of terminal settings). If this happens when sudo is a
foreground process, the command will be granted the controlling terminal and resumed in
the foreground with no user intervention required. The advantage of initially running
the command in the background is that sudo need not read from the terminal unless the
command explicitly requests it. Otherwise, any terminal input must be passed to the
command, whether it has required it or not (the kernel buffers terminals so it is not
possible to tell whether the command really wants the input). This is different from
historic sudo behavior or when the command is not being run in a pseudo-terminal.

For this to work seamlessly, the operating system must support the automatic restarting
of system calls. Unfortunately, not all operating systems do this by default, and even
those that do may have bugs. For example, macOS fails to restart the tcgetattr(3) and
tcsetattr(3) functions (this is a bug in macOS). Furthermore, because this behavior
depends on the command stopping with the SIGTTIN or SIGTTOU signals, programs that catch
these signals and suspend themselves with a different signal (usually SIGTOP) will not be
automatically foregrounded. Some versions of the linux su(1) command behave this way.
This flag is off by default.

This setting is only supported by version 1.8.7 or higher. It has no effect unless I/O
logging is enabled or the use_pty flag is enabled.

env_editor If set, visudo will use the value of the SUDO_EDITOR, VISUAL or EDITOR environment
variables before falling back on the default editor list. visudo is typically run as
root so this flag may allow a user with visudo privileges to run arbitrary commands as
root without logging. An alternative is to place a colon-separated list of “safe”
editors int the editor setting. visudo will then only use SUDO_EDITOR, VISUAL or EDITOR
if they match a value specified in editor. If the env_reset flag is enabled, the
SUDO_EDITOR, VISUAL and/or EDITOR environment variables must be present in the env_keep
list for the env_editor flag to function when visudo is invoked via sudo. This flag is
on by default.

env_reset If set, sudo will run the command in a minimal environment containing the TERM, PATH,
HOME, MAIL, SHELL, LOGNAME, USER and SUDO_* variables. Any variables in the caller's
environment or in the file specified by the restricted_env_file setting that match the
env_keep and env_check lists are then added, followed by any variables present in the
file specified by the env_file setting (if any). The contents of the env_keep and
env_check lists, as modified by global Defaults parameters in sudoers, are displayed when
sudo is run by root with the -V option. If the secure_path setting is enabled, its value
will be used for the PATH environment variable. This flag is on by default.

fast_glob Normally, sudo uses the glob(3) function to do shell-style globbing when matching path
names. However, since it accesses the file system, glob(3) can take a long time to
complete for some patterns, especially when the pattern references a network file system
that is mounted on demand (auto mounted). The fast_glob flag causes sudo to use the
fnmatch(3) function, which does not access the file system to do its matching. The
disadvantage of fast_glob is that it is unable to match relative paths such as ./ls or
../bin/ls. This has security implications when path names that include globbing
characters are used with the negation operator, ‘!’, as such rules can be trivially
bypassed. As such, this flag should not be used when the sudoers file contains rules
that contain negated path names which include globbing characters. This flag is off by
default.

log_passwords Most programs that require a user's password will disable echo before reading the
password to avoid displaying the plaintext password on the screen. However, if terminal
input is being logged (see I/O LOGGING), the password will still be present in the I/O
log. If the log_passwords option is disabled, sudoers will attempt to prevent passwords
from being logged. It does this by using the regular expressions in passprompt_regex to
match a password prompt in the terminal output buffer. When a match is found, input
characters in the I/O log will be replaced with ‘*’ until either a line feed or carriage
return is found in the terminal input or a new terminal output buffer is received. If,
however, a program displays characters as the user types (such as sudo when pwfeedback is
set), only the first character of the password will be replaced in the I/O log. This
option has no effect unless log_input or log_ttyin are also set. This flag is on by
default.

This setting is only supported by version 1.9.10 or higher.

fqdn Set this flag if you want to put fully qualified host names in the sudoers file when the
local host name (as returned by the ‘hostname’ command) does not contain the domain name.
In other words, instead of myhost you would use myhost.mydomain.edu. You may still use
the short form if you wish (and even mix the two). This flag is only effective when the
“canonical” host name, as returned by the getaddrinfo(3) or gethostbyname(3) function, is
a fully-qualified domain name. This is usually the case when the system is configured to
use DNS for host name resolution.

If the system is configured to use the /etc/hosts file in preference to DNS, the
“canonical” host name may not be fully-qualified. The order that sources are queried for
host name resolution is usually specified in the /etc/nsswitch.conf, /etc/netsvc.conf,
/etc/host.conf, or, in some cases, /etc/resolv.conf file. In the /etc/hosts file, the
first host name of the entry is considered to be the “canonical” name; subsequent names
are aliases that are not used by sudoers. For example, the following hosts file line for
the machine “xyzzy” has the fully-qualified domain name as the “canonical” host name, and
the short version as an alias.

192.168.1.1 xyzzy.sudo.ws xyzzy

If the machine's hosts file entry is not formatted properly, the fqdn flag will not be
effective if it is queried before DNS.

Beware that when using DNS for host name resolution, turning on fqdn requires sudoers to
make DNS lookups which renders sudo unusable if DNS stops working (for example if the
machine is disconnected from the network). Just like with the hosts file, you must use
the “canonical” name as DNS knows it. That is, you may not use a host alias (CNAME
entry) due to performance issues and the fact that there is no way to get all aliases
from DNS.

This flag is on by default.

ignore_audit_errors
Allow commands to be run even if sudoers cannot write to the audit log. If enabled, an
audit log write failure is not treated as a fatal error. If disabled, a command may only
be run after the audit event is successfully written. This flag is only effective on
systems for which sudoers supports audit logging, including FreeBSD, Linux, macOS, and
Solaris. This flag is on by default.

ignore_dot If set, sudo will ignore "." or "" (both denoting the current directory) in the PATH
environment variable; the PATH itself is not modified. This flag is off by default.

ignore_iolog_errors
Allow commands to be run even if sudoers cannot write to the I/O log (local or remote).
If enabled, an I/O log write failure is not treated as a fatal error. If disabled, the
command will be terminated if the I/O log cannot be written to. This flag is off by
default.

ignore_logfile_errors
Allow commands to be run even if sudoers cannot write to the log file. If enabled, a log
file write failure is not treated as a fatal error. If disabled, a command may only be
run after the log file entry is successfully written. This flag only has an effect when
sudoers is configured to use file-based logging via the logfile setting. This flag is on
by default.

ignore_local_sudoers
If set via LDAP, parsing of /etc/sudoers will be skipped. This is intended for sites
that wish to prevent the usage of local sudoers files so that only LDAP is used. This
thwarts the efforts of rogue operators who would attempt to add roles to /etc/sudoers.
When this flag is enabled, /etc/sudoers does not even need to exist. Since this flag
tells sudo how to behave when no specific LDAP entries have been matched, this sudoOption
is only meaningful for the ‘cn=defaults’ section. This flag is off by default.

ignore_unknown_defaults
If set, sudo will not produce a warning if it encounters an unknown Defaults entry in the
sudoers file or an unknown sudoOption in LDAP. This flag is off by default.

insults If set, sudo will insult users when they enter an incorrect password. This flag is off
by default.

log_allowed If set, sudoers will log commands allowed by the policy to the system audit log (where
supported) as well as to syslog and/or a log file. This flag is on by default.

This setting is only supported by version 1.8.29 or higher.

log_denied If set, sudoers will log commands denied by the policy to the system audit log (where
supported) as well as to syslog and/or a log file. This flag is on by default.

This setting is only supported by version 1.8.29 or higher.

log_exit_status If set, sudoers will log the exit value of commands that are run to syslog and/or a log
file. If a command was terminated by a signal, the signal name is logged as well. This
flag is off by default.

This setting is only supported by version 1.9.8 or higher.

log_host If set, the host name will be included in log entries written to the file configured by
the logfile setting. This flag is off by default.

log_input If set, sudo will run the command in a pseudo-terminal (if sudo was run from a terminal)
and log all user input. If the standard input is not connected to the user's terminal,
due to I/O redirection or because the command is part of a pipeline, that input is also
logged. For more information about I/O logging, see the I/O LOGGING section. This flag
is off by default.

log_output If set, sudo will run the command in a pseudo-terminal (if sudo was run from a terminal)
and log all output that is sent to the user's terminal, the standard output or the
standard error. If the standard output or standard error is not connected to the user's
terminal, due to I/O redirection or because the command is part of a pipeline, that
output is also logged. For more information about I/O logging, see the I/O LOGGING
section. This flag is off by default.

log_server_keepalive
If set, sudo will enable the TCP keepalive socket option on the connection to the log
server. This enables the periodic transmission of keepalive messages to the server. If
the server does not respond to a message, the connection will be closed and the running
command will be terminated unless the ignore_iolog_errors flag (I/O logging enabled) or
the ignore_log_errors flag (I/O logging disabled) is set. This flag is on by default.

This setting is only supported by version 1.9.0 or higher.

log_server_verify
If set, the server certificate received during the TLS handshake must be valid and it
must contain either the server name (from log_servers) or its IP address. If either of
these conditions is not met, the TLS handshake will fail. This flag is on by default.

This setting is only supported by version 1.9.0 or higher.

log_stderr If set, sudo will log the standard error if it is not connected to the user's terminal.
This can be used to log output to a pipe or redirected to a file. This flag is off by
default but is enabled when either the log_output flag or the LOG_OUTPUT command tag is
set.

log_stdin If set, sudo will log the standard input if it is not connected to the user's terminal.
This can be used to log input from a pipe or redirected from a file. This flag is off by
default but is enabled when either the log_input flag or the LOG_INPUT command tag is
set.

log_stdout If set, sudo will log the standard output if it is not connected to the user's terminal.
This can be used to log output to a pipe or redirected to a file. This flag is off by
default but is enabled when either the log_output flag or the LOG_OUTPUT command tag is
set.

log_subcmds If set, sudoers will log when a command spawns a child process and executes a program
using the execve(2), execl(3), execle(3), execlp(3), execv(3), execvp(3), execvpe(3), or
system(3) library functions. For example, if a shell is run by sudo, the individual
commands run via the shell will be logged. This flag is off by default.

The log_subcmds flag uses the same underlying mechanism as the intercept setting. Some
commands may not work properly when log_subcmds is enabled, due to the way it intercepts
sub-commands. See Preventing shell escapes for more information on what systems support
this option and its limitations. This setting is only supported by version 1.9.8 or
higher and is incompatible with SELinux RBAC support unless the system supports
seccomp(2) filter mode.

log_ttyin If set, sudo will run the command in a pseudo-terminal and log user keystrokes sent to
the user's terminal, if one is present. This flag is off by default but is enabled when
either the log_input flag or the LOG_INPUT command tag is set. If no terminal is
present, for example when running a remote command using ssh(1), this flag will have no
effect.

log_ttyout If set, sudo will run the command in a pseudo-terminal and log all output displayed on
the user's terminal, if one is present. This flag is off by default but is enabled when
either the log_output flag or the LOG_OUTPUT command tag is set. If no terminal is
present, for example when running a remote command using ssh(1), this flag will have no
effect.

log_year If set, the four-digit year will be logged in the (non-syslog) sudo log file. This flag
is off by default.

long_otp_prompt When validating with a One Time Password (OTP) scheme such as S/Key or OPIE, a two-line
prompt is used to make it easier to cut and paste the challenge to a local window. It's
not as pretty as the default but some people find it more convenient. This flag is off
by default.

mail_all_cmnds Send mail to the mailto user every time a user attempts to run a command via sudo (this
includes sudoedit). No mail will be sent if the user runs sudo with the -l or -v option
unless there is an authentication error and the mail_badpass flag is also set. This flag
is off by default.

mail_always Send mail to the mailto user every time a user runs sudo. This flag is off by default.

mail_badpass Send mail to the mailto user if the user running sudo does not enter the correct
password. If the command the user is attempting to run is not permitted by sudoers and
one of the mail_all_cmnds, mail_always, mail_no_host, mail_no_perms or mail_no_user flags
are set, this flag will have no effect. This flag is off by default.

mail_no_host If set, mail will be sent to the mailto user if the invoking user exists in the sudoers
file, but is not allowed to run commands on the current host. This flag is off by
default.

mail_no_perms If set, mail will be sent to the mailto user if the invoking user is allowed to use sudo
but the command they are trying is not listed in their sudoers file entry or is
explicitly denied. This flag is off by default.

mail_no_user If set, mail will be sent to the mailto user if the invoking user is not in the sudoers
file. This flag is on by default.

match_group_by_gid
By default, sudoers will look up each group the user is a member of by group-ID to
determine the group name (this is only done once). The resulting list of the user's
group names is used when matching groups listed in the sudoers file. This works well on
systems where the number of groups listed in the sudoers file is larger than the number
of groups a typical user belongs to. On systems where group lookups are slow, where
users may belong to a large number of groups, or where the number of groups listed in the
sudoers file is relatively small, it may be prohibitively expensive and running commands
via sudo may take longer than normal. On such systems it may be faster to use the
match_group_by_gid flag to avoid resolving the user's group-IDs to group names. In this
case, sudoers must look up any group name listed in the sudoers file and use the group-ID
instead of the group name when determining whether the user is a member of the group.

If match_group_by_gid is enabled, group database lookups performed by sudoers will be
keyed by group name as opposed to group-ID. On systems where there are multiple sources
for the group database, it is possible to have conflicting group names or group-IDs in
the local /etc/group file and the remote group database. On such systems, enabling or
disabling match_group_by_gid can be used to choose whether group database queries are
performed by name (enabled) or ID (disabled), which may aid in working around group entry
conflicts.

The match_group_by_gid flag has no effect when sudoers data is stored in LDAP. This flag
is off by default.

This setting is only supported by version 1.8.18 or higher.

intercept If set, all commands run via sudo will behave as if the INTERCEPT tag has been set,
unless overridden by an NOINTERCEPT tag. Some commands may not work properly when
intercept is enabled, due to the way it intercept sub-commands. See the description of
INTERCEPT and NOINTERCEPT above as well as the Preventing shell escapes section at the
end of this manual. This flag is off by default.

This setting is only supported by version 1.9.8 or higher and is incompatible with
SELinux RBAC support unless the system supports seccomp(2) filter mode.

intercept_allow_setid
On most systems, the dynamic loader will ignore LD_PRELOAD (or the equivalent) when
running set-user-ID and set-group-ID programs, effectively disabling intercept mode. To
prevent this from happening, sudoers will not permit a set-user-ID or set-group-ID
program to be run in intercept mode unless intercept_allow_setid is enable. This flag
has no effect unless the intercept flag is enabled or the INTERCEPT tag has been set for
the command. This flag is on by default when the intercept_type option is set to trace,
otherwise it default to off.

This setting is only supported by version 1.9.8 or higher.

intercept_authenticate
If set, commands run by an intercepted process must be authenticated when the user's time
stamp is not current. For example, if a shell is run with intercept enabled, as soon as
the invoking user's time stamp is out of date, subsequent commands will need to be
authenticated. This flag has no effect unless the intercept flag is enabled or the
INTERCEPT tag has been set for the command. This flag is off by default.

This setting is only supported by version 1.9.8 or higher.

intercept_verify If set, sudo will attempt to verify that a command run in intercept mode has the expected
path name, command line arguments and environment.

The process will be stopped after execve(2) has completed but before the new command has
had a chance to run. To verify the command, sudo will read the command's path from
/proc/PID/exe, the command line arguments and environment from the process's memory, and
compare them against the arguments that were passed to execve(2). In the event of a
mismatch, the command will be sent a SIGKILL signal and terminated.

This can help prevent a time of check versus time of use issue with intercept mode where
the execve(2) arguments could be altered after the sudoers policy check. The checks can
only be performed if the proc(5) file system is available. This flag has no effect
unless the intercept flag is enabled or the INTERCEPT tag has been set for the command
and the intercept_type option is set to trace.

This setting is incompatible with programs that change their root directory via
chroot(2). If a program changes its root directory, path names will no longer match
those seen by the sudo parent process and sub-commands will be terminated before they
have a chance to run. This flag is on by default.

This setting is only supported by version 1.9.12 or higher.

netgroup_tuple If set, netgroup lookups will be performed using the full netgroup tuple: host name, user
name, and domain (if one is set). Historically, sudo only matched the user name and
domain for netgroups used in a User_List and only matched the host name and domain for
netgroups used in a Host_List. This flag is off by default.

noexec If set, all commands run via sudo will behave as if the NOEXEC tag has been set, unless
overridden by an EXEC tag. See the description of EXEC and NOEXEC above as well as the
Preventing shell escapes section at the end of this manual. This flag is off by default.

noninteractive_auth
If set, authentication will be attempted even in non-interactive mode (when sudo's -n
option is specified). This allows authentication methods that don't require user
interaction to succeed. Authentication methods that require input from the user's
terminal will still fail. If disabled, authentication will not be attempted in non-
interactive mode. This flag is off by default.

This setting is only supported by version 1.9.10 or higher.

pam_acct_mgmt On systems that use PAM for authentication, sudo will perform PAM account validation for
the invoking user by default. The actual checks performed depend on which PAM modules
are configured. If enabled, account validation will be performed regardless of whether
or not a password is required. This flag is on by default.

This setting is only supported by version 1.8.28 or higher.

pam_rhost On systems that use PAM for authentication, sudo will set the PAM remote host value to
the name of the local host when the pam_rhost flag is enabled. On Linux systems,
enabling pam_rhost may result in DNS lookups of the local host name when PAM is
initialized. On Solaris versions prior to Solaris 8, pam_rhost must be enabled if
pam_ruser is also enabled to avoid a crash in the Solaris PAM implementation.

This flag is off by default on systems other than Solaris.

This setting is only supported by version 1.9.0 or higher.

pam_ruser On systems that use PAM for authentication, sudo will set the PAM remote user value to
the name of the user that invoked sudo when the pam_ruser flag is enabled. This flag is
on by default.

This setting is only supported by version 1.9.0 or higher.

pam_session On systems that use PAM for authentication, sudo will create a new PAM session for the
command to be run in. Unless sudo is given the -i or -s options, PAM session modules are
run with the “silent” flag enabled. This prevents last login information from being
displayed for every command on some systems. Disabling pam_session may be needed on
older PAM implementations or on operating systems where opening a PAM session changes the
utmp or wtmp files. If PAM session support is disabled, resource limits may not be
updated for the command being run. If pam_session, pam_setcred, and use_pty are
disabled, log_servers has not been set and I/O logging has not been configured, sudo will
execute the command directly instead of running it as a child process. This flag is on
by default.

This setting is only supported by version 1.8.7 or higher.

pam_setcred On systems that use PAM for authentication, sudo will attempt to establish credentials
for the target user by default, if supported by the underlying authentication system.
One example of a credential is a Kerberos ticket. If pam_session, pam_setcred, and
use_pty are disabled, log_servers has not been set and I/O logging has not been
configured, sudo will execute the command directly instead of running it as a child
process. This flag is on by default.

This setting is only supported by version 1.8.8 or higher.

passprompt_override
If set, the prompt specified by passprompt or the SUDO_PROMPT environment variable will
always be used and will replace the prompt provided by a PAM module or other
authentication method. This flag is off by default.

path_info Normally, sudo will tell the user when a command could not be found in their PATH
environment variable. Some sites may wish to disable this as it could be used to gather
information on the location of executables that the normal user does not have access to.
The disadvantage is that if the executable is simply not in the user's PATH, sudo will
tell the user that they are not allowed to run it, which can be confusing. This flag is
on by default.

preserve_groups By default, sudo will initialize the group vector to the list of groups the target user
is in. When preserve_groups is set, the user's existing group vector is left unaltered.
The real and effective group-IDs, however, are still set to match the target user. This
flag is off by default.

pwfeedback By default, sudo reads the password like most other Unix programs, by turning off echo
until the user hits the return (or enter) key. Some users become confused by this as it
appears to them that sudo has hung at this point. When pwfeedback is set, sudo will
provide visual feedback when the user presses a key. This does have a security impact as
an onlooker may be able to determine the length of the password being entered. This flag
is off by default.

requiretty If set, sudo will only run when the user is logged in to a real tty. When this flag is
set, sudo can only be run from a login session and not via other means such as cron(8) or
cgi-bin scripts. This flag is off by default.

root_sudo If set, root is allowed to run sudo too. Disabling this prevents users from “chaining”
sudo commands to get a root shell by doing something like ‘sudo sudo /bin/sh’. Note,
however, that turning off root_sudo will also prevent root from running sudoedit.
Disabling root_sudo provides no real additional security; it exists purely for historical
reasons. This flag is on by default.

rootpw If set, sudo will prompt for the root password instead of the password of the invoking
user when running a command or editing a file. This flag is off by default.

runas_allow_unknown_id
If enabled, allow matching of runas user and group IDs that are not present in the
password or group databases. In addition to explicitly matching unknown user or group
IDs in a Runas_List, this option also allows the ALL alias to match unknown IDs. This
flag is off by default.

This setting is only supported by version 1.8.30 or higher. Older versions of sudo
always allowed matching of unknown user and group IDs.

runas_check_shell
If enabled, sudo will only run commands as a user whose shell appears in the /etc/shells
file, even if the invoking user's Runas_List would otherwise permit it. If no
/etc/shells file is present, a system-dependent list of built-in default shells is used.
On many operating systems, system users such as “bin”, do not have a valid shell and this
flag can be used to prevent commands from being run as those users. This flag is off by
default.

This setting is only supported by version 1.8.30 or higher.

runaspw If set, sudo will prompt for the password of the user defined by the runas_default option
(defaults to root) instead of the password of the invoking user when running a command or
editing a file. This flag is off by default.

selinux If enabled, the user may specify an SELinux role and/or type to use when running the
command, as permitted by the SELinux policy. If SELinux is disabled on the system, this
flag has no effect. This flag is on by default.

set_home If enabled and sudo is invoked with the -s option, the HOME environment variable will be
set to the home directory of the target user (which is the runas_default user unless the
-u option is used). This flag is largely obsolete and has no effect unless the env_reset
flag has been disabled or HOME is present in the env_keep list, both of which are
strongly discouraged. This flag is off by default.

set_logname Normally, sudo will set the LOGNAME and USER environment variables to the name of the
target user (the user specified by runas_default unless the -u option is given).
However, since some programs (including the RCS revision control system) use LOGNAME to
determine the real identity of the user, it may be desirable to change this behavior.
This can be done by negating the set_logname option. The set_logname option will have no
effect if the env_reset option has not been disabled and the env_keep list contains
LOGNAME or USER. This flag is on by default.

set_utmp When enabled, sudo will create an entry in the utmp (or utmpx) file when a pseudo-
terminal is allocated. A pseudo-terminal is allocated by sudo when it is running in a
terminal and one or more of the log_input, log_output, log_stdin, log_stdout, log_stderr,
log_ttyin, log_ttyout, or use_pty flags is enabled. By default, the new entry will be a
copy of the user's existing utmp entry (if any), with the tty, time, type, and pid fields
updated. This flag is on by default.

setenv Allow the user to disable the env_reset option from the command line via the -E option.
Additionally, environment variables set via the command line are not subject to the
restrictions imposed by env_check, env_delete, or env_keep. As such, only trusted users
should be allowed to set variables in this manner. This flag is off by default.

shell_noargs If set and sudo is invoked with no arguments it acts as if the -s option had been given.
That is, it runs a shell as root (the shell is determined by the SHELL environment
variable if it is set, falling back on the shell listed in the invoking user's
/etc/passwd entry if not). This flag is off by default.

stay_setuid Normally, when sudo executes a command the real and effective user-IDs are set to the
target user (root by default). This option changes that behavior such that the real
user-ID is left as the invoking user's user-ID. In other words, this makes sudo act as a
set-user-ID wrapper. This can be useful on systems that disable some potentially
dangerous functionality when a program is run set-user-ID. This option is only effective
on systems that support either the setreuid(2) or setresuid(2) system call. This flag is
off by default.

sudoedit_checkdir
If set, sudoedit will check all directory components of the path to be edited for
writability by the invoking user. Symbolic links will not be followed in writable
directories and sudoedit will refuse to edit a file located in a writable directory.
These restrictions are not enforced when sudoedit is run by root. On some systems, if
all directory components of the path to be edited are not readable by the target user,
sudoedit will be unable to edit the file. This flag is on by default.

This setting was first introduced in version 1.8.15 but initially suffered from a race
condition. The check for symbolic links in writable intermediate directories was added
in version 1.8.16.

sudoedit_follow By default, sudoedit will not follow symbolic links when opening files. The
sudoedit_follow option can be enabled to allow sudoedit to open symbolic links. It may
be overridden on a per-command basis by the FOLLOW and NOFOLLOW tags. This flag is off
by default.

This setting is only supported by version 1.8.15 or higher.

syslog_pid When logging via syslog(3), include the process ID in the log entry. This flag is off by
default.

This setting is only supported by version 1.8.21 or higher.

targetpw If set, sudo will prompt for the password of the user specified by the -u option
(defaults to the value of runas_default) instead of the password of the invoking user
when running a command or editing a file. This flag precludes the use of a user-ID not
listed in the passwd database as an argument to the -u option. This flag is off by
default.

tty_tickets If set, users must authenticate on a per-tty basis. With this flag enabled, sudo will
use a separate record in the time stamp file for each terminal. If disabled, a single
record is used for all login sessions.

This option has been superseded by the timestamp_type option.

umask_override If set, sudo will set the umask as specified in the sudoers file without modification.
This makes it possible to specify a umask in the sudoers file that is more permissive
than the user's own umask and matches historical behavior. If umask_override is not set,
sudo will set the umask to be the union of the user's umask and what is specified in
sudoers. This flag is off by default.

use_netgroups If set, netgroups (prefixed with ‘+’), may be used in place of a user or host. For LDAP-
based sudoers, netgroup support requires an expensive sub-string match on the server
unless the NETGROUP_BASE directive is present in the /etc/ldap.conf file. If netgroups
are not needed, this option can be disabled to reduce the load on the LDAP server. This
flag is on by default.

use_pty If set, and sudo is running in a terminal, the command will be run in a new pseudo-
terminal. If the sudo process is not attached to a terminal, use_pty has no effect.

A malicious program run under sudo may be capable of injecting commands into the user's
terminal or running a background process that retains access to the user's terminal
device even after the main program has finished executing. By running the command in a
separate pseudo-terminal, this attack is no longer possible. This flag is on by default
for sudo 1.9.14 and above.

user_command_timeouts
If set, the user may specify a timeout on the command line. If the timeout expires
before the command has exited, the command will be terminated. If a timeout is specified
both in the sudoers file and on the command line, the smaller of the two timeouts will be
used. See the Timeout_Spec section for a description of the timeout syntax. This flag
is off by default.

This setting is only supported by version 1.8.20 or higher.

utmp_runas If set, sudo will store the name of the runas user when updating the utmp (or utmpx)
file. By default, sudo stores the name of the invoking user. This flag is off by
default.

visiblepw By default, sudo will refuse to run if the user must enter a password but it is not
possible to disable echo on the terminal. If the visiblepw flag is set, sudo will prompt
for a password even when it would be visible on the screen. This makes it possible to
run things like ‘ssh somehost sudo ls’ since by default, ssh(1) does not allocate a tty
when running a command. This flag is off by default.

Integers:

closefrom Before it executes a command, sudo will close all open file descriptors other than
standard input, standard output, and standard error (file descriptors 0-2). The
closefrom option can be used to specify a different file descriptor at which to start
closing. The default is 3.

command_timeout The maximum amount of time a command is allowed to run before it is terminated. See the
Timeout_Spec section for a description of the timeout syntax.

This setting is only supported by version 1.8.20 or higher.

log_server_timeout
The maximum amount of time to wait when connecting to a log server or waiting for a
server response. See the Timeout_Spec section for a description of the timeout syntax.
The default value is 30 seconds.

This setting is only supported by version 1.9.0 or higher.

maxseq The maximum sequence number that will be substituted for the ‘%{seq}’ escape in the I/O
log file (see the iolog_dir description below for more information). While the value
substituted for ‘%{seq}’ is in base 36, maxseq itself should be expressed in decimal.
Values larger than 2176782336 (which corresponds to the base 36 sequence number “ZZZZZZ”)
will be silently truncated to 2176782336. The default value is 2176782336.

Once the local sequence number reaches the value of maxseq, it will “roll over” to zero,
after which sudoers will truncate and re-use any existing I/O log path names.

This setting is only supported by version 1.8.7 or higher.

passwd_tries The number of tries a user gets to enter his/her password before sudo logs the failure
and exits. The default is 3.

syslog_maxlen On many systems, syslog(3) has a relatively small log buffer. IETF RFC 5424 states that
syslog servers must support messages of at least 480 bytes and should support messages up
to 2048 bytes. By default, sudoers creates log messages up to 980 bytes which
corresponds to the historic BSD syslog implementation which used a 1024 byte buffer to
store the message, date, hostname, and program name. To prevent syslog messages from
being truncated, sudoers will split up log messages that are larger than syslog_maxlen
bytes. When a message is split, additional parts will include the string “(command
continued)” after the user name and before the continued command line arguments.

This setting is only supported by version 1.8.19 or higher.

Integers that can be used in a boolean context:

loglinelen Number of characters per line for the file log. This value is used to decide when to
wrap lines for nicer log files. This has no effect on the syslog log file, only the file
log. The default is 80 (use 0 or negate the option to disable word wrap).

passwd_timeout Number of minutes before the sudo password prompt times out, or 0 for no timeout. The
timeout may include a fractional component if minute granularity is insufficient, for
example 2.5. The default is 0.

timestamp_timeout
Number of minutes that can elapse before sudo will ask for a password again. The timeout
may include a fractional component if minute granularity is insufficient, for example
2.5. The default is 15. Set this to 0 to always prompt for a password. If set to a
value less than 0 the user's time stamp will not expire until the system is rebooted.
This can be used to allow users to create or delete their own time stamps via ‘sudo -v’
and ‘sudo -k’ respectively.

umask File mode creation mask to use when running the command. Negate this option or set it to
0777 to prevent sudoers from changing the umask. Unless the umask_override flag is set,
the actual umask will be the union of the user's umask and the value of the umask
setting, which defaults to 0022. This guarantees that sudo never lowers the umask when
running a command.

If umask is explicitly set in sudoers, it will override any umask setting in PAM or
login.conf. If umask is not set in sudoers, the umask specified by PAM or login.conf
will take precedence. The umask setting in PAM is not used for sudoedit, which does not
create a new PAM session.

Strings:

apparmor_profile The default AppArmor profile to transition into when executing the command. The default
apparmor_profile can be overridden for individual sudoers entries by specifying the
APPARMOR_PROFILE option. This option is only available when sudo is built with AppArmor
support.

authfail_message Message that is displayed after a user fails to authenticate. The message may include
the ‘%d’ escape which will expand to the number of failed password attempts. If set, it
overrides the default message, “%d incorrect password attempt(s)”.

badpass_message Message that is displayed if a user enters an incorrect password. The default is “Sorry,
try again.” unless insults are enabled.

editor A colon (‘:’) separated list of editor path names used by sudoedit and visudo. For
sudoedit, this list is used to find an editor when none of the SUDO_EDITOR, VISUAL or
EDITOR environment variables are set to an editor that exists and is executable. For
visudo, it is used as a white list of allowed editors; visudo will choose the editor that
matches the user's SUDO_EDITOR, VISUAL or EDITOR environment variable if possible, or the
first editor in the list that exists and is executable if not. Unless invoked as
sudoedit, sudo does not preserve the SUDO_EDITOR, VISUAL or EDITOR environment variables
unless they are present in the env_keep list or the env_reset option is disabled. The
default is /usr/bin/editor.

intercept_type The underlying mechanism used by the intercept and log_subcmds options. It has the
following possible values:

dso Preload a dynamic shared object (shared library) that intercepts the execve(2),
execl(3), execle(3), execlp(3), execv(3), execvp(3), execvpe(3), and system(3)
library functions. A value of dso is incompatible with sudo's SELinux RBAC
support.

trace Use ptrace(2) to intercept the execve(2) system call. This is only supported on
Linux systems where seccomp(2) filtering is enabled. If the
/proc/sys/kernel/seccomp/actions_avail file is missing or does not contain a
“trap” element, setting intercept_type to trace will have no effect and dso will
be used instead.

The default is to use trace if it is supported by the system and dso if it is not.

iolog_dir The top-level directory to use when constructing the path name for the input/output log
directory. Only used if the log_input or log_output options are enabled or when the
LOG_INPUT or LOG_OUTPUT tags are present for a command. The session sequence number, if
any, is stored in the directory. The default is /var/log/sudo-io.

The following percent (‘%’) escape sequences are supported:

%{seq}
expanded to a monotonically increasing base-36 sequence number, such as 0100A5,
where every two digits are used to form a new directory, e.g., 01/00/A5

%{user}
expanded to the invoking user's login name

%{group}
expanded to the name of the invoking user's real group-ID

%{runas_user}
expanded to the login name of the user the command will be run as (e.g., root)

%{runas_group}
expanded to the group name of the user the command will be run as (e.g., wheel)

%{hostname}
expanded to the local host name without the domain name

%{command}
expanded to the base name of the command being run

In addition, any escape sequences supported by the system's strftime(3) function will be
expanded.

To include a literal ‘%’ character, the string ‘%%’ should be used.

Any path name separator characters (‘/’) present in the user, group or host name will be
replaced with an underbar (‘_’) during expansion.

iolog_file The path name, relative to iolog_dir, in which to store input/output logs when the
log_input or log_output options are enabled or when the LOG_INPUT or LOG_OUTPUT tags are
present for a command. iolog_file may contain directory components. The default is
‘%{seq}’.

See the iolog_dir option above for a list of supported percent (‘%’) escape sequences.

In addition to the escape sequences, path names that end in six or more Xs will have the
Xs replaced with a unique combination of digits and letters, similar to the mktemp(3)
function.

If the path created by concatenating iolog_dir and iolog_file already exists, the
existing I/O log file will be truncated and overwritten unless iolog_file ends in six or
more Xs.

iolog_flush If set, sudo will flush I/O log data to disk after each write instead of buffering it.
This makes it possible to view the logs in real-time as the program is executing but may
significantly reduce the effectiveness of I/O log compression. This flag is off by
default.

This setting is only supported by version 1.8.20 or higher.

iolog_group The group name to look up when setting the group-ID on new I/O log files and directories.
If iolog_group is not set, the primary group-ID of the user specified by iolog_user is
used. If neither iolog_group nor iolog_user are set, I/O log files and directories are
created with group-ID 0.

This setting is only supported by version 1.8.19 or higher.

iolog_mode The file mode to use when creating I/O log files. Mode bits for read and write
permissions for owner, group, or other are honored, everything else is ignored. The file
permissions will always include the owner read and write bits, even if they are not
present in the specified mode. When creating I/O log directories, search (execute) bits
are added to match the read and write bits specified by iolog_mode. Defaults to 0600
(read and write by user only).

This setting is only supported by version 1.8.19 or higher.

iolog_user The user name to look up when setting the user and group-IDs on new I/O log files and
directories. If iolog_group is set, it will be used instead of the user's primary group-
ID. By default, I/O log files and directories are created with user and group-ID 0.

This setting can be useful when the I/O logs are stored on a Network File System (NFS)
share. Having a dedicated user own the I/O log files means that sudoers does not write
to the log files as user-ID 0, which is usually not permitted by NFS.

This setting is only supported by version 1.8.19 or higher.

lecture_status_dir
The directory in which sudo stores per-user lecture status files. Once a user has
received the lecture, a zero-length file is created in this directory so that sudo will
not lecture the user again. This directory should not be cleared when the system
reboots. The default is /var/lib/sudo/lectured.

log_server_cabundle
The path to a certificate authority bundle file, in PEM format, to use instead of the
system's default certificate authority database when authenticating the log server. The
default is to use the system's default certificate authority database. This setting has
no effect unless log_servers is set and the remote log server is secured with TLS.

This setting is only supported by version 1.9.0 or higher.

log_server_peer_cert
The path to the sudo client's certificate file, in PEM format. This setting is required
when the remote log server is secured with TLS and client certificate validation is
enabled. For sudo_logsrvd, client certificate validation is controlled by the
tls_checkpeer option, which defaults to false.

This setting is only supported by version 1.9.0 or higher.

log_server_peer_key
The path to the sudo client's private key file, in PEM format. This setting is required
when the remote log server is secured with TLS and client certificate validation is
enabled. For sudo_logsrvd, client certificate validation is controlled by the
tls_checkpeer flag, which defaults to false.

This setting is only supported by version 1.9.0 or higher.

mailsub Subject of the mail sent to the mailto user. The escape ‘%h’ will expand to the host
name of the machine. Default is “*** SECURITY information for %h ***”.

noexec_file As of sudo version 1.8.1 this option is no longer supported. The path to the noexec file
should now be set in the sudo.conf(5) file.

pam_askpass_service
On systems that use PAM for authentication, this is the service name used when the -A
option is specified. The default value is either ‘sudo’ or ‘sudo-i’, depending on
whether or not the -i option is also specified. See the description of pam_service for
more information.

This setting is only supported by version 1.9.9 or higher.

pam_login_service
On systems that use PAM for authentication, this is the service name used when the -i
option is specified. The default value is ‘sudo-i’. See the description of pam_service
for more information.

This setting is only supported by version 1.8.8 or higher.

pam_service On systems that use PAM for authentication, the service name specifies the PAM policy to
apply. This usually corresponds to an entry in the pam.conf file or a file in the
/etc/pam.d directory. The default value is ‘sudo’.

This setting is only supported by version 1.8.8 or higher.

passprompt The default prompt to use when asking for a password; can be overridden via the -p option
or the SUDO_PROMPT environment variable. The following percent (‘%’) escape sequences
are supported:

%H expanded to the local host name including the domain name (only if the machine's
host name is fully qualified or the fqdn option is set)

%h expanded to the local host name without the domain name

%p expanded to the user whose password is being asked for (respects the rootpw,
targetpw and runaspw flags in sudoers)

%U expanded to the login name of the user the command will be run as (defaults to
root)

%u expanded to the invoking user's login name

%% two consecutive ‘%’ characters are collapsed into a single ‘%’ character

On systems that use PAM for authentication, passprompt will only be used if the prompt
provided by the PAM module matches the string “Password: ” or “username's Password: ”.
This ensures that the passprompt setting does not interfere with challenge-response style
authentication. The passprompt_override flag can be used to change this behavior.

The default value is ‘[sudo] password for %p: ’.

role The default SELinux role to use when constructing a new security context to run the
command. The default role may be overridden on a per-command basis in the sudoers file
or via command line options. This option is only available when sudo is built with
SELinux support.

runas_default The default user to run commands as if the -u option is not specified on the command
line. This defaults to root.

sudoers_locale Locale to use when parsing the sudoers file, logging commands, and sending email.
Changing the locale may affect how sudoers is interpreted. Defaults to ‘C’.

timestamp_type sudoers uses per-user time stamp files for credential caching. The timestamp_type option
can be used to specify the type of time stamp record used. It has the following possible
values:

global A single time stamp record is used for all of a user's login sessions, regardless
of the terminal or parent process ID. An additional record is used to serialize
password prompts when sudo is used multiple times in a pipeline, but this does
not affect authentication.

ppid A single time stamp record is used for all processes with the same parent process
ID (usually the shell). Commands run from the same shell (or other common parent
process) will not require a password for timestamp_timeout minutes (15 by
default). Commands run via sudo with a different parent process ID, for example
from a shell script, will be authenticated separately.

tty One time stamp record is used for each terminal, which means that a user's login
sessions are authenticated separately. If no terminal is present, the behavior
is the same as ppid. Commands run from the same terminal will not require a
password for timestamp_timeout minutes (15 by default).

kernel The time stamp is stored in the kernel as an attribute of the terminal device.
If no terminal is present, the behavior is the same as ppid. Negative
timestamp_timeout values are not supported and positive values are limited to a
maximum of 60 minutes. This is currently only supported on OpenBSD.

The default value is tty.

This setting is only supported by version 1.8.21 or higher.

timestampdir The directory in which sudo stores its time stamp files. This directory should be
cleared when the system reboots. The default is /run/sudo/ts.

timestampowner The owner of the lecture status directory, time stamp directory and all files stored
therein. The default is root.

type The default SELinux type to use when constructing a new security context to run the
command. The default type may be overridden on a per-command basis in the sudoers file
or via command line options. This option is only available when sudo is built with
SELinux support.

Strings that can be used in a boolean context:

admin_flag The admin_flag option specifies the path to a file that is created the first time a user that
is a member of the sudo or admin groups runs sudo. Only available if sudo is configured with
the --enable-admin-flag option. The default value is ~/.sudo_as_admin_successful.

env_file The env_file option specifies the fully qualified path to a file containing variables to be
set in the environment of the program being run. Entries in this file should either be of
the form ‘VARIABLE=value’ or ‘export VARIABLE=value’. The value may optionally be enclosed
in single or double quotes. Variables in this file are only added if the variable does not
already exist in the environment. This file is considered to be part of the security policy,
its contents are not subject to other sudo environment restrictions such as env_keep and
env_check.

exempt_group Users in this group are exempt from password and PATH requirements. The group name specified
should not include a ‘%’ prefix. This is not set by default.

fdexec Determines whether sudo will execute a command by its path or by an open file descriptor. It
has the following possible values:

always Always execute by file descriptor.

never Never execute by file descriptor.

digest_only
Only execute by file descriptor if the command has an associated digest in the
sudoers file.

The default value is digest_only. This avoids a time of check versus time of use race
condition when the command is located in a directory writable by the invoking user.

fdexec will change the first element of the argument vector for scripts ($0 in the shell) due
to the way the kernel runs script interpreters. Instead of being a normal path, it will
refer to a file descriptor. For example, /dev/fd/4 on Solaris and /proc/self/fd/4 on Linux.
A workaround is to use the SUDO_COMMAND environment variable instead.

The fdexec setting is only used when the command is matched by path name. It has no effect
if the command is matched by the built-in ALL alias.

This setting is only supported by version 1.8.20 or higher. If the operating system does not
support the fexecve(2) system call, this setting has no effect.

group_plugin A string containing a sudoers group plugin with optional arguments. The string should
consist of the plugin path, either fully-qualified or relative to the /usr/libexec/sudo
directory, followed by any configuration arguments the plugin requires. These arguments (if
any) will be passed to the plugin's initialization function. If arguments are present, the
string must be enclosed in double quotes ("").

On 64-bit systems, if the plugin is present but cannot be loaded, sudoers will look for a
64-bit version and, if it exists, load that as a fallback. The exact rules for this vary by
system. On Solaris, if the plugin is stored in a directory ending in “lib”, sudoers will
create a fallback path by appending “/64” to the directory name; /usr/lib/group_plugin.so
becomes /usr/lib/64/group_plugin.so. On Linux, a directory ending in “lib” will be
transformed to “lib64” as the fallback path; /usr/lib/group_plugin.so becomes
/usr/lib64/group_plugin.so. On all other systems, the fallback path is generated by adding a
“64” before the file extension; group_plugin.so becomes group_plugin64.so.

On AIX systems, the plugin may be either a shared object ending in ‘.so’ or an archive file
containing a shared object ending in ‘.a’ with the name of the shared object in parentheses
at the end.

For more information see GROUP PROVIDER PLUGINS.

lecture This option controls when a short lecture will be printed along with the password prompt. It
has the following possible values:

always Always lecture the user.

never Never lecture the user.

once Only lecture the user the first time they run sudo.

If no value is specified, a value of once is implied. Negating the option results in a value
of never being used. The default value is never.

lecture_file Path to a file containing an alternate sudo lecture that will be used in place of the
standard lecture if the named file exists. By default, sudo uses a built-in lecture.

listpw This option controls when a password will be required when a user runs sudo with the -l
option. It has the following possible values:

all All the user's sudoers file entries for the current host must have the NOPASSWD flag
set to avoid entering a password.

always
The user must always enter a password to use the -l option.

any At least one of the user's sudoers file entries for the current host must have the
NOPASSWD flag set to avoid entering a password.

never
The user need never enter a password to use the -l option.

If no value is specified, a value of any is implied. Negating the option results in a value
of never being used. The default value is any.

log_format The event log format. Supported log formats are:

json Logs in JSON format. JSON log entries contain the full user details as well as the
execution environment if the command was allowed. Due to limitations of the protocol,
JSON events sent via syslog may be truncated.

sudo Traditional sudo-style logs, see EVENT LOGGING for a description of the log file
format.

This setting affects logs sent via syslog(3) as well as the file specified by the logfile
setting, if any. The default value is sudo.

logfile Path to the sudo log file (not the syslog log file). Setting a path turns on logging to a
file; negating this option turns it off. By default, sudo logs via syslog.

mailerflags Flags to use when invoking mailer. Defaults to -t.

mailerpath Path to mail program used to send warning mail (negate to prevent sudo from sending mail).
Defaults to the path to sendmail found at configure time.

mailfrom Address to use for the “from” address when sending warning and error mail. The address
should be enclosed in double quotes ("") to protect against sudo interpreting the ‘@’ sign.
Defaults to the name of the user running sudo.

mailto Address to send warning and error mail to (negate to prevent sudo from sending mail). The
address should be enclosed in double quotes ("") to protect against sudo interpreting the ‘@’
sign. Defaults to root.

rlimit_as The maximum size to which the process's address space may grow (in bytes), if supported by
the operating system. See Resource limits for more information.

rlimit_core The largest size core dump file that may be created (in bytes). See Resource limits for more
information. Defaults to 0 (no core dump created).

rlimit_cpu The maximum amount of CPU time that the process may use (in seconds). See Resource limits
for more information.

rlimit_data The maximum size of the data segment for the process (in bytes). See Resource limits for
more information.

rlimit_fsize The largest size file that the process may create (in bytes). See Resource limits for more
information.

rlimit_locks The maximum number of locks that the process may establish, if supported by the operating
system. See Resource limits for more information.

rlimit_memlock
The maximum size that the process may lock in memory (in bytes), if supported by the
operating system. See Resource limits for more information.

rlimit_nofile
The maximum number of files that the process may have open. See Resource limits for more
information.

rlimit_nproc The maximum number of processes that the user may run simultaneously. See Resource limits
for more information.

rlimit_rss The maximum size to which the process's resident set size may grow (in bytes). See Resource
limits for more information.

rlimit_stack The maximum size to which the process's stack may grow (in bytes). See Resource limits for
more information.

restricted_env_file
The restricted_env_file option specifies the fully qualified path to a file containing
variables to be set in the environment of the program being run. Entries in this file should
either be of the form ‘VARIABLE=value’ or ‘export VARIABLE=value’. The value may optionally
be enclosed in single or double quotes. Variables in this file are only added if the
variable does not already exist in the environment. Unlike env_file, the file's contents are
not trusted and are processed in a manner similar to that of the invoking user's environment.
If env_reset is enabled, variables in the file will only be added if they are matched by
either the env_check or env_keep list. If env_reset is disabled, variables in the file are
added as long as they are not matched by the env_delete list. In either case, the contents
of restricted_env_file are processed before the contents of env_file.

runchroot If set, sudo will use this value for the root directory when running a command. The special
value “*” will allow the user to specify the root directory via sudo's -R option. See the
Chroot_Spec section for more details.

It is only possible to use runchroot as a command-specific Defaults setting if the command
exists with the same path both inside and outside the chroot jail. This restriction does not
apply to global, host, or user-based Defaults settings or to a Cmnd_Spec that includes a
Chroot_Spec.

This setting is only supported by version 1.9.3 or higher.

runcwd If set, sudo will use this value for the working directory when running a command. The
special value “*” will allow the user to specify the working directory via sudo's -D option.
See the Chdir_Spec section for more details.

This setting is only supported by version 1.9.3 or higher.

secure_path If set, sudo will use this value in place of the user's PATH environment variable. This
option can be used to reset the PATH to a known good value that contains directories for
system administrator commands such as /usr/sbin.

Users in the group specified by the exempt_group option are not affected by secure_path.
This option is not set by default.

syslog Syslog facility if syslog is being used for logging (negate to disable syslog logging).
Defaults to authpriv.

The following syslog facilities are supported: authpriv (if your OS supports it), auth,
daemon, user, local0, local1, local2, local3, local4, local5, local6, and local7.

syslog_badpri
Syslog priority to use when the user is not allowed to run a command or when authentication
is unsuccessful. Defaults to alert.

The following syslog priorities are supported: alert, crit, debug, emerg, err, info, notice,
warning, and none. Negating the option or setting it to a value of none will disable logging
of unsuccessful commands.

syslog_goodpri
Syslog priority to use when the user is allowed to run a command and authentication is
successful. Defaults to notice.

See syslog_badpri for the list of supported syslog priorities. Negating the option or
setting it to a value of none will disable logging of successful commands.

verifypw This option controls when a password will be required when a user runs sudo with the -v
option. It has the following possible values:

all All the user's sudoers file entries for the current host must have the NOPASSWD flag
set to avoid entering a password.

always The user must always enter a password to use the -v option.

any At least one of the user's sudoers file entries for the current host must have the
NOPASSWD flag set to avoid entering a password.

never The user need never enter a password to use the -v option.

If no value is specified, a value of all is implied. Negating the option results in a value
of never being used. The default value is all.

Lists that can be used in a boolean context:

env_check Environment variables to be removed from the user's environment unless they are
considered “safe”. For all variables except TZ, “safe” means that the variable's value
does not contain any ‘%’ or ‘/’ characters. This can be used to guard against printf-
style format vulnerabilities in poorly-written programs. The TZ variable is considered
unsafe if any of the following are true:

• It consists of a fully-qualified path name, optionally prefixed with a colon (‘:’),
that does not match the location of the zoneinfo directory.

• It contains a .. path element.

• It contains white space or non-printable characters.

• It is longer than the value of PATH_MAX.

The argument may be a double-quoted, space-separated list or a single value without
double-quotes. The list can be replaced, added to, deleted from, or disabled by using
the ‘=’, ‘+=’, ‘-=’, and ‘!’ operators respectively. Regardless of whether the env_reset
option is enabled or disabled, variables specified by env_check will be preserved in the
environment if they pass the aforementioned check. The global list of environment
variables to check is displayed when sudo is run by root with the -V option.

env_delete Environment variables to be removed from the user's environment when the env_reset option
is not in effect. The argument may be a double-quoted, space-separated list or a single
value without double-quotes. The list can be replaced, added to, deleted from, or
disabled by using the ‘=’, ‘+=’, ‘-=’, and ‘!’ operators respectively. The global list
of environment variables to remove is displayed when sudo is run by root with the -V
option. Many operating systems will remove potentially dangerous variables from the
environment of any set-user-ID process (such as sudo).

env_keep Environment variables to be preserved in the user's environment when the env_reset option
is in effect. This allows fine-grained control over the environment sudo-spawned
processes will receive. The argument may be a double-quoted, space-separated list or a
single value without double-quotes. The list can be replaced, added to, deleted from, or
disabled by using the ‘=’, ‘+=’, ‘-=’, and ‘!’ operators respectively. The global list
of variables to keep is displayed when sudo is run by root with the -V option.

Preserving the HOME environment variable has security implications since many programs
use it when searching for configuration or data files. Adding HOME to env_keep may
enable a user to run unrestricted commands via sudo and is strongly discouraged. Users
wishing to edit files with sudo should run sudoedit (or sudo -e) to get their accustomed
editor configuration instead of invoking the editor directly.

log_servers A list of one or more servers to use for remote event and I/O log storage, separated by
white space. Log servers must be running sudo_logsrvd or another service that implements
the protocol described by sudo_logsrv.proto(5).

Server addresses should be of the form “host[:port][(tls)]”. The host portion may be a
host name, an IPv4 address, or an IPv6 address in square brackets.

If the optional tls flag is present, the connection will be secured with Transport Layer
Security (TLS) version 1.2 or 1.3. Versions of TLS prior to 1.2 are not supported.

If a port is specified, it may either be a port number or a well-known service name as
defined by the system service name database. If no port is specified, port 30343 will be
used for plaintext connections and port 30344 will be used for TLS connections.

When log_servers is set, event log data will be logged both locally (see the syslog and
log_file settings) as well as remotely, but I/O log data will only be logged remotely.
If multiple hosts are specified, they will be attempted in reverse order. If no log
servers are available, the user will not be able to run a command unless either the
ignore_iolog_errors flag (I/O logging enabled) or the ignore_log_errors flag (I/O logging
disabled) is set. Likewise, if the connection to the log server is interrupted while
sudo is running, the command will be terminated unless the ignore_iolog_errors flag (I/O
logging enabled) or the ignore_log_errors flag (I/O logging disabled) is set.

This setting is only supported by version 1.9.0 or higher.

passprompt_regex A list of POSIX extended regular expressions used to match password prompts in the
terminal output. As an extension, if the regular expression begins with “(?i)”, it will
be matched in a case-insensitive manner. Each regular expression is limited to 1024
characters. This option is only used when log_passwords has been disabled. The default
value is “[Pp]assword[: ]*”

This setting is only supported by version 1.9.10 or higher.

GROUP PROVIDER PLUGINS

The sudoers plugin supports its own plugin interface to allow non-Unix group lookups which can query a
group source other than the standard Unix group database. This can be used to implement support for the
nonunix_group syntax described earlier.

Group provider plugins are specified via the group_plugin setting. The argument to group_plugin should
consist of the plugin path, either fully-qualified or relative to the /usr/libexec/sudo directory, followed
by any configuration options the plugin requires. These options (if specified) will be passed to the
plugin's initialization function. If options are present, the string must be enclosed in double quotes
("").

The following group provider plugins are installed by default:

group_file
The group_file plugin supports an alternate group file that uses the same syntax as the /etc/group
file. The path to the group file should be specified as an option to the plugin. For example, if
the group file to be used is /etc/sudo-group:

Defaults group_plugin="group_file.so /etc/sudo-group"

system_group
The system_group plugin supports group lookups via the standard C library functions getgrnam(3) and
getgrid(3). This plugin can be used in instances where the user belongs to groups not present in the
user's supplemental group vector. This plugin takes no options:

Defaults group_plugin=system_group.so

The group provider plugin API is described in detail in sudo_plugin(5).

EVENT LOGGING

sudoers can log events in either JSON or sudo format, this section describes the sudo log format.
Depending on sudoers configuration, sudoers can log events via syslog(3), to a local log file, or both.
The log format is almost identical in both cases. Any control characters present in the log data are
formatted in octal with a leading ‘#’ character. For example, a horizontal tab is stored as ‘#011’ and an
embedded carriage return is stored as ‘#015’. In addition, space characters in the command path are stored
as ‘#040’. Command line arguments that contain spaces are enclosed in single quotes (''). This makes it
possible to distinguish multiple command line arguments from a single argument that contains spaces.
Literal single quotes and backslash characters (‘\’) in command line arguments are escaped with a
backslash.

Accepted command log entries
Commands that sudo runs are logged using the following format (split into multiple lines for readability):

date hostname progname: username : TTY=ttyname ; CHROOT=chroot ; \
PWD=cwd ; USER=runasuser ; GROUP=runasgroup ; TSID=logid ; \
ENV=env_vars COMMAND=command

Where the fields are as follows:

date The date the command was run. Typically, this is in the format “MMM, DD, HH:MM:SS”. If
logging via syslog(3), the actual date format is controlled by the syslog daemon. If logging
to a file and the log_year option is enabled, the date will also include the year.

hostname The name of the host sudo was run on. This field is only present when logging via syslog(3).

progname The name of the program, usually sudo or sudoedit. This field is only present when logging
via syslog(3).

username The login name of the user who ran sudo.

ttyname The short name of the terminal (e.g., “console”, “tty01”, or “pts/0”) sudo was run on, or
“unknown” if there was no terminal present.

chroot The root directory that the command was run in, if one was specified.

cwd The current working directory that sudo was run in.

runasuser The user the command was run as.

runasgroup The group the command was run as if one was specified on the command line.

logid An I/O log identifier that can be used to replay the command's output. This is only present
when the log_input or log_output option is enabled.

env_vars A list of environment variables specified on the command line, if specified.

command The actual command that was executed, including any command line arguments.

Messages are logged using the locale specified by sudoers_locale, which defaults to the ‘C’ locale.

Denied command log entries
If the user is not allowed to run the command, the reason for the denial will follow the user name.
Possible reasons include:

user NOT in sudoers
The user is not listed in the sudoers file.

user NOT authorized on host
The user is listed in the sudoers file but is not allowed to run commands on the host.

command not allowed
The user is listed in the sudoers file for the host but they are not allowed to run the specified
command.

3 incorrect password attempts
The user failed to enter their password after 3 tries. The actual number of tries will vary based on the
number of failed attempts and the value of the passwd_tries option.

a password is required
The -n option was specified but a password was required.

sorry, you are not allowed to set the following environment variables
The user specified environment variables on the command line that were not allowed by sudoers.

Error log entries
If an error occurs, sudoers will log a message and, in most cases, send a message to the administrator via
email. Possible errors include:

parse error in /etc/sudoers near line N
sudoers encountered an error when parsing the specified file. In some cases, the actual error may be one
line above or below the line number listed, depending on the type of error.

problem with defaults entries
The sudoers file contains one or more unknown Defaults settings. This does not prevent sudo from
running, but the sudoers file should be checked using visudo.

timestamp owner (username): No such user
The time stamp directory owner, as specified by the timestampowner setting, could not be found in the
password database.

unable to open/read /etc/sudoers
The sudoers file could not be opened for reading. This can happen when the sudoers file is located on a
remote file system that maps user-ID 0 to a different value. Normally, sudoers tries to open the sudoers
file using group permissions to avoid this problem. Consider either changing the ownership of
/etc/sudoers or adding an argument like “sudoers_uid=N” (where ‘N’ is the user-ID that owns the sudoers
file) to the end of the sudoers Plugin line in the sudo.conf(5) file.

unable to open /etc/sudoers
The /etc/sudoers file is missing.

/etc/sudoers is not a regular file
The /etc/sudoers file exists but is not a regular file or symbolic link.

/etc/sudoers is owned by uid N, should be 0
The sudoers file has the wrong owner. If you wish to change the sudoers file owner, add “sudoers_uid=N”
(where ‘N’ is the user-ID that owns the sudoers file) to the sudoers Plugin line in the sudo.conf(5)
file.

/etc/sudoers is world writable
The permissions on the sudoers file allow all users to write to it. The sudoers file must not be world-
writable, the default file mode is 0440 (readable by owner and group, writable by none). The default
mode may be changed via the “sudoers_mode” option to the sudoers Plugin line in the sudo.conf(5) file.

/etc/sudoers is owned by gid N, should be 1
The sudoers file has the wrong group ownership. If you wish to change the sudoers file group ownership,
add “sudoers_gid=N” (where ‘N’ is the group-ID that owns the sudoers file) to the sudoers Plugin line in
the sudo.conf(5) file.

unable to open /run/sudo/ts/user-ID
sudoers was unable to read or create the user's time stamp file. This can happen when timestampowner is
set to a user other than root and the mode on /run/sudo is not searchable by group or other. The default
mode for /run/sudo is 0711.

unable to write to /run/sudo/ts/user-ID
sudoers was unable to write to the user's time stamp file.

/run/sudo/ts is owned by uid X, should be Y
The time stamp directory is owned by a user other than timestampowner. This can occur when the value of
timestampowner has been changed. sudoers will ignore the time stamp directory until the owner is
corrected.

/run/sudo/ts is group writable
The time stamp directory is group-writable; it should be writable only by timestampowner. The default
mode for the time stamp directory is 0700. sudoers will ignore the time stamp directory until the mode
is corrected.

Notes on logging via syslog
By default, sudoers logs messages via syslog(3). The date, hostname, and progname fields are added by the
system's syslog(3) function, not sudoers itself. As such, they may vary in format on different systems.

The maximum size of syslog messages varies from system to system. The syslog_maxlen setting can be used to
change the maximum syslog message size from the default value of 980 bytes. For more information, see the
description of syslog_maxlen.

Notes on logging to a file
If the logfile option is set, sudoers will log to a local file, such as /var/log/sudo. When logging to a
file, sudoers uses a format similar to syslog(3), with a few important differences:

1. The progname field is not present.

2. The hostname is only logged if the log_host option is enabled.

3. The date does not include the year unless the log_year option is enabled.

4. Lines that are longer than loglinelen characters (80 by default) are word-wrapped and continued on the
next line with a four character indent. This makes entries easier to read for a human being, but
makes it more difficult to use grep(1) on the log files. If the loglinelen option is set to 0 (or
negated with a ‘!’), word wrap will be disabled.

I/O LOGGING

When I/O logging is enabled, sudo will runs the command in a pseudo-terminal, logging user input and/or
output, depending on which sudoers flags are enabled. There are five distinct types of I/O that can be
logged, each with a corresponding sudoers flag.

Type Flag Description
terminal input log_ttyin keystrokes entered by the user
terminal output log_ttyout command output displayed to the screen
standard input log_stdin input from a pipe or a file
standard output log_stdout output to a pipe or a file
standard error log_stderr output to a pipe or a file

In addition to flags described the above, the log_input flag and LOG_INPUT command tag set both log_ttyin
and log_stdin. The log_output flag and LOG_OUTPUT command tag set log_ttyout, log_stdout, and log_stderr.

To capture terminal input and output, sudo run the command in a pseudo-terminal, logging the input and
output before passing it on to the user. To capture the standard input, standard output or standard error,
sudo uses a pipe to interpose itself between the input or output stream, logging the I/O before passing it
to the other end of the pipe.

I/O can be logged either to the local machine or to a remote log server. For local logs, I/O is logged to
the directory specified by the iolog_dir option (/var/log/sudo-io by default) using a unique session ID
that is included in the sudo log line, prefixed with ‘TSID=’. The iolog_file option may be used to control
the format of the session ID. For remote logs, the log_servers setting is used to specify one or more log
servers running sudo_logsrvd or another server that implements the protocol described by
sudo_logsrv.proto(5).

I/O logging pitfals
When logging standard input, anything sent to the standard input will be consumed, regardless of whether or
not the command run via sudo is actively reading the standard input. This may have unexpected results when
using sudo in a shell script that expects to process the standard input. For example, given the following
shell script:

#!/bin/sh
sudo echo testing
echo done

It will behave as expected when the script is passed to the shell as a an argument:

$ sh test.sh
testing
done

However, if the script is passed to the shell on the standard input, the ‘sudo echo testing’ command will
consume the rest of the script. This means that the ‘echo done’ statement is never executed.

$ sh -s < test.sh
testing

There are several ways to work around this problem:

1. Redirect the standard input from /dev/null when running a command via sudo that does not need to read
the standard input.

sudo echo testing < /dev/null

2. Pass the script to the shell by path name instead of via the standard input.

sh test.sh

3. Disable logging the standard input for commands that do not need to read the standard input.

Defaults!/bin/echo !log_stdin

Depending on the command, it may not be desirable to log the standard input or standard output. For
example, I/O logging of commands that send or receive large amount of data via the standard output or
standard input such as rsync(1) and tar(1) could fill up the log file system with superfluous data. It is
possible to disable logging of the standard input and standard output for such commands as follows:

Cmnd_Alias COPY_CMDS = /usr/bin/tar, /usr/bin/cpio, /usr/bin/rsync

# Log input and output but omit stdin and stdout when copying files.
Defaults log_input, log_output
Defaults!COPY_CMDS !log_stdin, !log_stdout

However, be aware that using the log_input flag or the LOG_INPUT command tag will also enable log_stdin.
Likewise, the log_ouput flag or the LOG_OUTPUT command tag will enable log_stdout and log_stderr. Careful
ordering of rules may be necessary to achieve the results that you expect.

I/O log format
For both local and remote I/O logs, each log is stored in a separate directory that contains the following
files:

log A text file containing information about the command. The first line consists of the following
colon-delimited fields: the time the command was run, the name of the user who ran sudo, the name
of the target user, the name of the target group (optional), the terminal that sudo was run from,
and the number of lines and columns of the terminal. The second and third lines contain the
working directory the command was run from and the path name of the command itself (with
arguments if present).

log.json A JSON-formatted file containing information about the command. This is similar to the log file
but contains additional information and is easily extensible. The log.json file will be used by
sudoreplay(8) in preference to the log file if it exists. The file may contain the following
elements:

timestamp
A JSON object containing time the command was run. It consists of two values, seconds and
nanoseconds.

columns
The number of columns of the terminal the command ran on, or zero if no terminal was
present.

command
The fully-qualified path of the command that was run.

lines
The number of lines of the terminal the command ran on, or zero if no terminal was present.

runargv
A JSON array representing the command's argument vector as passed to the execve(2) system
call.

runenv
A JSON array representing the command's environment as passed to the execve(2) system call.

rungid
The group ID the command ran as. This element is only present when the user specifies a
group on the command line.

rungroup
The name of the group the command ran as. This element is only present when the user
specifies a group on the command line.

runuid
The user ID the command ran as.

runuser
The name of the user the command ran as.

submitcwd
The current working directory at the time sudo was run.

submithost
The name of the host the command was run on.

submituser
The name of the user who ran the command via sudo.

ttyname
The path name of the terminal the user invoked sudo from. If the command was run in a
pseudo-terminal, ttyname will be different from the terminal the command actually ran in.

timing Timing information used to replay the session. Each line consists of the I/O log entry type and
amount of time since the last entry, followed by type-specific data. The I/O log entry types and
their corresponding type-specific data are:

0 standard input, number of bytes in the entry
1 standard output, number of bytes in the entry
2 standard error, number of bytes in the entry
3 terminal input, number of bytes in the entry
4 terminal output, number of bytes in the entry
5 window change, new number lines and columns
6 bug compatibility for sudo 1.8.7 terminal output
7 command suspend or resume, signal received

ttyin Raw input from the user's terminal, exactly as it was received. This file is only present if the
log_input or log_ttyin flags are set and sudo was run from a terminal. No post-processing is
performed. For manual viewing, you may wish to convert carriage return characters in the log to
line feeds. For example: ‘gunzip -c ttyin | tr "\r" "\n"’

stdin The standard input when no terminal is present, or input redirected from a pipe or file. This
file is only present if the log_input or log_stdin flags are set and the standard input is not
connected to a terminal.

ttyout Output from the pseudo-terminal (what the command writes to the screen). Terminal-specific post-
processing is performed before the data is logged. This means that, for example, line feeds are
usually converted to line feed/carriage return pairs and tabs may be expanded to spaces. This
file is only present if the log_output or log_ttyout flags are set and sudo was run from a
terminal.

stdout The standard output when no terminal is present, or output redirected to a pipe or file. This
file is only present if the log_output or log_stdout flags are set and the standard output is not
connected to a terminal.

stderr The standard error when no terminal is present, or output redirected to a pipe or file. This
file is only present if the log_output or log_stderr flags are set and the standard error is not
connected to a terminal.

All files other than log are compressed in gzip format unless the compress_io flag has been disabled. Due
to buffering, it is not normally possible to display the I/O logs in real-time as the program is executing.
The I/O log data will not be complete until the program run by sudo has exited or has been terminated by a
signal. The iolog_flush flag can be used to disable buffering, in which case I/O log data is written to
disk as soon as it is available. The output portion of an I/O log file can be viewed with the
sudoreplay(8) utility, which can also be used to list or search the available logs.

User input may contain sensitive information such as passwords (even if they are not echoed to the screen),
which will be stored in the log file unencrypted. In most cases, logging the command output via log_output
or LOG_OUTPUT is all that is required. When logging input, consider disabling the log_passwords flag.

Since each session's I/O logs are stored in a separate directory, traditional log rotation utilities cannot
be used to limit the number of I/O logs. The simplest way to limit the number of I/O is by setting the
maxseq option to the maximum number of logs you wish to store. Once the I/O log sequence number reaches
maxseq, it will be reset to zero and sudoers will truncate and re-use any existing I/O logs.

FILES

     /etc/sudo.conf            Sudo front-end configuration

     /etc/sudoers              List of who can run what

     /etc/group                Local groups file

     /etc/netgroup             List of network groups

     /var/log/sudo-io          I/O log files

     /run/sudo/ts              Directory containing time stamps for the sudoers security policy

     /var/lib/sudo/lectured    Directory containing lecture status files for the sudoers security policy

     /etc/environment          Initial environment for -i mode on AIX and Linux systems

EXAMPLES

     Below are example sudoers file entries.  Admittedly, some of these are a bit contrived.  First, we allow a
     few environment variables to pass and then define our aliases:

     # Run X applications through sudo; HOME is used to find the
     # .Xauthority file.  Other programs use HOME to locate configuration
     # files and this may lead to privilege escalation!
     Defaults env_keep += "DISPLAY HOME"

     # User alias specification
     User_Alias      FULLTIMERS = millert, mikef, dowdy
     User_Alias      PARTTIMERS = bostley, jwfox, crawl
     User_Alias      WEBADMIN = will, wendy, wim

     # Runas alias specification
     Runas_Alias     OP = root, operator
     Runas_Alias     DB = oracle, sybase
     Runas_Alias     ADMINGRP = adm, oper

     # Host alias specification
     Host_Alias      SPARC = bigtime, eclipse, moet, anchor :\
                     SGI = grolsch, dandelion, black :\
                     ALPHA = widget, thalamus, foobar :\
                     HPPA = boa, nag, python
     Host_Alias      CUNETS = 128.138.0.0/255.255.0.0
     Host_Alias      CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0
     Host_Alias      SERVERS = primary, mail, www, ns
     Host_Alias      CDROM = orion, perseus, hercules

     # Cmnd alias specification
     Cmnd_Alias      DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\
                             /usr/sbin/restore, /usr/sbin/rrestore,\
                             sha224:0GomF8mNN3wlDt1HD9XldjJ3SNgpFdbjO1+NsQ== \
                             /home/operator/bin/start_backups
     Cmnd_Alias      KILL = /usr/bin/kill
     Cmnd_Alias      PRINTING = /usr/sbin/lpc, /usr/bin/lprm
     Cmnd_Alias      SHUTDOWN = /usr/sbin/shutdown
     Cmnd_Alias      HALT = /usr/sbin/halt
     Cmnd_Alias      REBOOT = /usr/sbin/reboot
     Cmnd_Alias      SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh,\
                              /usr/local/bin/tcsh, /usr/bin/rsh,\
                              /usr/local/bin/zsh
     Cmnd_Alias      SU = /usr/bin/su
     Cmnd_Alias      PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less

     Here we override some of the compiled in default values.  We want sudo to log via syslog(3) using the auth
     facility in all cases and for commands to be run with the target user's home directory as the working
     directory.  We don't want to subject the full time staff to the sudo lecture and we want to allow them to
     run commands in a chroot(2) “sandbox” via the -R option.  User millert need not provide a password and we
     don't want to reset the LOGNAME or USER environment variables when running commands as root.  Additionally,
     on the machines in the SERVERS Host_Alias, we keep an additional local log file and make sure we log the
     year in each log line since the log entries will be kept around for several years.  Lastly, we disable
     shell escapes for the commands in the PAGERS Cmnd_Alias (/usr/bin/more, /usr/bin/pg and /usr/bin/less).
     This will not effectively constrain users with sudo ALL privileges.

     # Override built-in defaults
     Defaults                syslog=auth,runcwd=~
     Defaults>root           !set_logname
     Defaults:FULLTIMERS     !lecture,runchroot=*
     Defaults:millert        !authenticate
     Defaults@SERVERS        log_year, logfile=/var/log/sudo.log
     Defaults!PAGERS         noexec

     The User specification is the part that actually determines who may run what.

     root            ALL = (ALL) ALL
     %wheel          ALL = (ALL) ALL

     We let root and any user in group wheel run any command on any host as any user.

     FULLTIMERS      ALL = NOPASSWD: ALL

     Full time sysadmins (millert, mikef, and dowdy) may run any command on any host without authenticating
     themselves.

     PARTTIMERS      ALL = ALL

     Part time sysadmins bostley, jwfox, and crawl) may run any command on any host but they must authenticate
     themselves first (since the entry lacks the NOPASSWD tag).

     jack            CSNETS = ALL

     The user jack may run any command on the machines in the CSNETS alias (the networks 128.138.243.0,
     128.138.204.0, and 128.138.242.0).  Of those networks, only 128.138.204.0 has an explicit netmask (in CIDR
     notation) indicating it is a class C network.  For the other networks in CSNETS, the local machine's
     netmask will be used during matching.

     lisa            CUNETS = ALL

     The user lisa may run any command on any host in the CUNETS alias (the class B network 128.138.0.0).

     operator        ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\
                     sudoedit /etc/printcap, /usr/oper/bin/

     The operator user may run commands limited to simple maintenance.  Here, those are commands related to
     backups, killing processes, the printing system, shutting down the system, and any commands in the
     directory /usr/oper/bin/.  One command in the DUMPS Cmnd_Alias includes a sha224 digest,
     /home/operator/bin/start_backups.  This is because the directory containing the script is writable by the
     operator user.  If the script is modified (resulting in a digest mismatch) it will no longer be possible to
     run it via sudo.

     joe             ALL = /usr/bin/su operator

     The user joe may only su(1) to operator.

     pete            HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd *root*

     %opers          ALL = (: ADMINGRP) /usr/sbin/

     Users in the opers group may run commands in /usr/sbin/ as themselves with any group in the ADMINGRP
     Runas_Alias (the adm and oper groups).

     The user pete is allowed to change anyone's password except for root on the HPPA machines.  Because command
     line arguments are matched as a single, concatenated string, the ‘*’ wildcard will match multiple words.
     This example assumes that passwd(1) does not take multiple user names on the command line.  On systems with
     GNU getopt(3), options to passwd(1) may be specified after the user argument.  As a result, this rule will
     also allow:

         passwd username --expire

     which may not be desirable.

     bob             SPARC = (OP) ALL : SGI = (OP) ALL

     The user bob may run anything on the SPARC and SGI machines as any user listed in the OP Runas_Alias (root
     and operator.)

     jim             +biglab = ALL

     The user jim may run any command on machines in the biglab netgroup.  sudo knows that “biglab” is a
     netgroup due to the ‘+’ prefix.

     +secretaries    ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser

     Users in the secretaries netgroup need to help manage the printers as well as add and remove users, so they
     are allowed to run those commands on all machines.

     fred            ALL = (DB) NOPASSWD: ALL

     The user fred can run commands as any user in the DB Runas_Alias (oracle or sybase) without giving a
     password.

     john            ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root*

     On the ALPHA machines, user john may su to anyone except root but he is not allowed to specify any options
     to the su(1) command.

     jen             ALL, !SERVERS = ALL

     The user jen may run any command on any machine except for those in the SERVERS Host_Alias (primary, mail,
     www, and ns).

     jill            SERVERS = /usr/bin/, !SU, !SHELLS

     For any machine in the SERVERS Host_Alias, jill may run any commands in the directory /usr/bin/ except for
     those commands belonging to the SU and SHELLS Cmnd_Aliases.  While not specifically mentioned in the rule,
     the commands in the PAGERS Cmnd_Alias all reside in /usr/bin and have the noexec option set.

     steve           CSNETS = (operator) /usr/local/op_commands/

     The user steve may run any command in the directory /usr/local/op_commands/ but only as user operator.

     matt            valkyrie = KILL

     On his personal workstation, valkyrie, matt needs to be able to kill hung processes.

     WEBADMIN        www = (www) ALL, (root) /usr/bin/su www

     On the host www, any user in the WEBADMIN User_Alias (will, wendy, and wim), may run any command as user
     www (which owns the web pages) or simply su(1) to www.

     ALL             CDROM = NOPASSWD: /sbin/umount /CDROM,\
                     /sbin/mount -o nosuid\,nodev /dev/cd0a /CDROM

     Any user may mount or unmount a CD-ROM on the machines in the CDROM Host_Alias (orion, perseus, hercules)
     without entering a password.  This is a bit tedious for users to type, so it is a prime candidate for
     encapsulating in a shell script.

SECURITY NOTES

Limitations of the ‘!’ operator
It is generally not effective to “subtract” commands from ALL using the ‘!’ operator. A user can trivially
circumvent this by copying the desired command to a different name and then executing that. For example:

bill ALL = ALL, !SU, !SHELLS

Doesn't really prevent bill from running the commands listed in SU or SHELLS since he can simply copy those
commands to a different name, or use a shell escape from an editor or other program. Therefore, these kind
of restrictions should be considered advisory at best (and reinforced by policy).

In general, if a user has sudo ALL there is nothing to prevent them from creating their own program that
gives them a root shell (or making their own copy of a shell) regardless of any ‘!’ elements in the user
specification.

Security implications of fast_glob
If the fast_glob option is in use, it is not possible to reliably negate commands where the path name
includes globbing (aka wildcard) characters. This is because the C library's fnmatch(3) function cannot
resolve relative paths. While this is typically only an inconvenience for rules that grant privileges, it
can result in a security issue for rules that subtract or revoke privileges.

For example, given the following sudoers file entry:

john ALL = /usr/bin/passwd [a-zA-Z0-9]*, /usr/bin/chsh [a-zA-Z0-9]*,\
/usr/bin/chfn [a-zA-Z0-9]*, !/usr/bin/* root

User john can still run ‘/usr/bin/passwd root’ if fast_glob is enabled by changing to /usr/bin and running
‘./passwd root’ instead.

Another potential issue is that when sudo executes the command, it must use the command or path specified
by the user instead of a path listed in the sudoers file. This may lead to a time of check versus time of
use race condition.

Wildcards in command arguments
Command line arguments are matched as a single, concatenated string. This mean a wildcard character such
as ‘?’ or ‘*’ will match across word boundaries, which may be unexpected. For example, while a sudoers
entry like:

%operator ALL = /bin/cat /var/log/messages*

will allow command like:

$ sudo cat /var/log/messages.1

It will also allow:

$ sudo cat /var/log/messages /etc/shadow

which is probably not what was intended. A safer alternative is to use a regular expression for matching
command line arguments. The above example can be rewritten as a regular expression:

%operator ALL = /bin/cat ^/var/log/messages[^[:space:]]*$

The regular expression will only match a single file with a name that begins with /var/log/messages and
does not include any white space in the name. It is often better to do command line processing outside of
the sudoers file in a scripting language for anything non-trivial.

Regular expressions in command names
Using a regular expression to match a command name has the same security implications as using the
fast_glob option:

• It is not possible to reliably negate commands when the path name is a regular expression.

• When sudo executes the command, it must use the command or path specified by the user instead of a path
listed in the sudoers file. This may lead to a time of check versus time of use race condition.

These issues do not apply to rules where only the command line options are matched using a regular
expression.

Preventing shell escapes
Once sudo executes a program, that program is free to do whatever it pleases, including run other programs.
This can be a security issue since it is not uncommon for a program to allow shell escapes, which lets a
user bypass sudo's access control and logging. Common programs that permit shell escapes include shells
(obviously), editors, paginators, mail, and terminal programs.

There are four basic approaches to this problem:

restrict Avoid giving users access to commands that allow the user to run arbitrary commands. Many
editors have a restricted mode where shell escapes are disabled, though sudoedit is a better
solution to running editors via sudo. Due to the large number of programs that offer shell
escapes, restricting users to the set of programs that do not is often unworkable.

intercept On most systems, sudo's intercept functionality can be used to transparently intercept an
attempt to run a new command, allow or deny it based on sudoers rules, and log the result. For
example, this can be used to restrict the commands run from within a privileged shell or editor.
However, not all programs operate correctly when intercept is enabled.

There are two underlying mechanisms that may be used to implement intercept mode: dso and trace.
The intercept_type setting can be used to select between them.

The first mechanism, dso, overrides the standard C library functions that are used to execute a
command. It does this by setting an environment variable (usually LD_PRELOAD) to the path of a
dynamic shared object, or shared library, containing custom versions of the execve(2), execl(3),
execle(3), execlp(3), execv(3), execvp(3), execvpe(3), and system(3) library functions that
connect back to sudo for a policy decision. Note, however, that this applies only to
dynamically-linked executables. It is not possible to intercept commands for statically-linked
executables or executables that run under binary emulation this way. Because most dynamic
loaders ignore LD_PRELOAD (or the equivalent) when running set-user-ID and set-group-ID
programs, sudoers will not permit such programs to be run in intercept mode by default. The dso
mechanism is incompatible with sudo's SELinux RBAC support (but see below). SELinux disables
LD_PRELOAD by default and interferes with file descriptor inheritance, which sudo relies on.

The second mechanism, trace, is available on Linux systems that support seccomp(2) filtering.
It uses ptrace(2) and seccomp(2) to intercept the execve(2) system call instead of pre-loading a
dynamic shared object. Both static and dynamic executables are supported and it is compatible
with sudo's SELinux RBAC mode. Functions utilizing the execveat(2) system call, such as
fexecve(3), are not currently intercepted. Programs that rely on ptrace(2) themselves, such as
debuggers and system call tracers (such as strace(1) and truss(1)) will be unable to function if
intercept is enabled in trace mode. This same restriction applies to the log_subcmds sudoers
option.

The intercept feature is known to work on Solaris, *BSD, Linux, macOS, HP-UX 11.x and AIX 5.3
and above. It should be supported on most operating systems that support the LD_PRELOAD
environment variable or an equivalent. It is not possible to intercept shell built-in commands
or restrict the ability to read or write sensitive files from within a shell.

To enable intercept mode on a per-command basis, use the INTERCEPT tag as documented in the User
Specification section above. Here is that example again:

chuck research = INTERCEPT: ALL

This allows user chuck to run any command on the machine “research” in intercept mode. Any
commands run via shell escapes will be validated and logged by sudo. If you are unsure whether
or not your system is capable of supporting intercept, you can always just try it out and check
whether or not external commands run via a shell are logged when intercept is enabled.

There is an inherent race condition between when a command is checked against sudoers rules and
when it is actually executed. If a user is allowed to run arbitrary commands, they may be able
to change the execve(2) arguments in the program after the sudoers policy check has completed
but before the new command is executed. Starting with version 1.9.12, the trace method will
verify that the command and its arguments have not changed after execve(2) has completed but
before execution of the new program has had a chance to run. This is not the case with the dso
method. See the description of the intercept_verify setting for more information.

log There are two separate but related ways to log additional commands. The first is to enable I/O
logging using the log_output flag. This will log the command's output but will not create an
event log entry when the additional command is run. The second is to enable the log_subcmds
flag in sudoers which will create an event log entry every time a new command is run. If I/O
logging is also enabled, the log entry will include a time offset into the I/O log to indicate
when the command was run. This offset can be passed to the sudoreplay(8) utility to replay the
I/O log at the exact moment when the command was run. The log_subcmds flag uses the same
mechanism as intercept (see above) and has the same limitations.

noexec sudo's noexec functionality can be used to prevent a program run by sudo from executing any
other programs. On most systems, it uses the same LD_PRELOAD mechanism as intercept (see above)
and thus the same caveats apply. The noexec functionality is capable of blocking execution of
commands run via the execve(2), execl(3), execle(3), execlp(3), exect(3), execv(3), execveat(3),
execvP(3), execvp(3), execvpe(3), fexecve(3), popen(3), posix_spawn(3), posix_spawnp(3),
system(3), and wordexp(3) functions. On Linux, a seccomp(2) filter is used to implement noexec.
On Solaris 10 and higher, noexec uses Solaris privileges instead of the LD_PRELOAD environment
variable.

To enable noexec for a command, use the NOEXEC tag as documented in the User Specification
section above. Here is that example again:

aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi

This allows user aaron to run /usr/bin/more and /usr/bin/vi with noexec enabled. This will
prevent those two commands from executing other commands (such as a shell). If you are unsure
whether or not your system is capable of supporting noexec you can always just try it out and
check whether shell escapes work when noexec is enabled.

Restricting shell escapes is not a panacea. Programs running as root are still capable of many potentially
hazardous operations (such as changing or overwriting files) that could lead to unintended privilege
escalation. In the specific case of an editor, a safer approach is to give the user permission to run
sudoedit (see below).

Secure editing
The sudoers plugin includes sudoedit support which allows users to securely edit files with the editor of
their choice. As sudoedit is a built-in command, it must be specified in the sudoers file without a
leading path. However, it may take command line arguments just as a normal command does. Wildcards used
in sudoedit command line arguments are expected to be path names, so a forward slash (‘/’) will not be
matched by a wildcard.

Unlike other sudo commands, the editor is run with the permissions of the invoking user and with the
environment unmodified. More information may be found in the description of the -e option in sudo(8).

For example, to allow user operator to edit the “message of the day” file on any machine:

operator ALL = sudoedit /etc/motd

The operator user then runs sudoedit as follows:

$ sudoedit /etc/motd

The editor will run as the operator user, not root, on a temporary copy of /etc/motd. After the file has
been edited, /etc/motd will be updated with the contents of the temporary copy.

Users should never be granted sudoedit permission to edit a file that resides in a directory the user has
write access to, either directly or via a wildcard. If the user has write access to the directory it is
possible to replace the legitimate file with a link to another file, allowing the editing of arbitrary
files. To prevent this, starting with version 1.8.16, symbolic links will not be followed in writable
directories and sudoedit will refuse to edit a file located in a writable directory unless the
sudoedit_checkdir option has been disabled or the invoking user is root. Additionally, in version 1.8.15
and higher, sudoedit will refuse to open a symbolic link unless either the sudoedit_follow option is
enabled or the sudoedit command is prefixed with the FOLLOW tag in the sudoers file.

Time stamp file checks
sudoers will check the ownership of its time stamp directory (/run/sudo/ts by default) and ignore the
directory's contents if it is not owned by root or if it is writable by a user other than root. Older
versions of sudo stored time stamp files in /tmp; this is no longer recommended as it may be possible for a
user to create the time stamp themselves on systems that allow unprivileged users to change the ownership
of files they create.

While the time stamp directory should be cleared at reboot time, not all systems contain a /run or /var/run
directory. To avoid potential problems, sudoers will ignore time stamp files that date from before the
machine booted on systems where the boot time is available.

Some systems with graphical desktop environments allow unprivileged users to change the system clock.
Since sudoers relies on the system clock for time stamp validation, it may be possible on such systems for
a user to run sudo for longer than timestamp_timeout by setting the clock back. To combat this, sudoers
uses a monotonic clock (which never moves backwards) for its time stamps if the system supports it.

sudoers will not honor time stamps set far in the future. Time stamps with a date greater than
current_time + 2 * TIMEOUT will be ignored and sudoers will log and complain.

If the timestamp_type option is set to “tty”, the time stamp record includes the device number of the
terminal the user authenticated with. This provides per-terminal granularity but time stamp records may
still outlive the user's session.

Unless the timestamp_type option is set to “global”, the time stamp record also includes the session ID of
the process that last authenticated. This prevents processes in different terminal sessions from using the
same time stamp record. On systems where a process's start time can be queried, the start time of the
session leader is recorded in the time stamp record. If no terminal is present or the timestamp_type
option is set to “ppid”, the start time of the parent process is used instead. In most cases this will
prevent a time stamp record from being re-used without the user entering a password when logging out and
back in again.

DEBUGGING

     Versions 1.8.4 and higher of the sudoers plugin support a flexible debugging framework that can help track
     down what the plugin is doing internally if there is a problem.  This can be configured in the sudo.conf(5)
     file.

     The sudoers plugin uses the same debug flag format as the sudo front-end: subsystem@priority.

     The priorities used by sudoers, in order of decreasing severity, are: crit, err, warn, notice, diag, info,
     trace, and debug.  Each priority, when specified, also includes all priorities higher than it.  For
     example, a priority of notice would include debug messages logged at notice and higher.

     The following subsystems are used by the sudoers plugin:

     alias     User_Alias, Runas_Alias, Host_Alias and Cmnd_Alias processing

     all       matches every subsystem

     audit     BSM and Linux audit code

     auth      user authentication

     defaults  sudoers file Defaults settings

     env       environment handling

     ldap      LDAP-based sudoers

     logging   logging support

     match     matching of users, groups, hosts, and netgroups in the sudoers file

     netif     network interface handling

     nss       network service switch handling in sudoers

     parser    sudoers file parsing

     perms     permission setting

     plugin    The equivalent of main for the plugin.

     pty       pseudo-terminal related code

     rbtree    redblack tree internals

     sssd      SSSD-based sudoers

     util      utility functions

     For example:

     Debug sudoers.so /var/log/sudoers_debug match@info,nss@info

     For more information, see the sudo.conf(5) manual.

AUTHORS

     Many people have worked on sudo over the years; this version consists of code written primarily by:

           Todd C. Miller

     See the CONTRIBUTORS.md file in the sudo distribution (https://www.sudo.ws/about/contributors/) for an
     exhaustive list of people who have contributed to sudo.

CAVEATS

     The sudoers file should always be edited by the visudo utility which locks the file and checks for syntax
     errors.  If sudoers contains syntax errors, sudo may refuse to run, which is a serious problem if sudo is
     your only method of obtaining superuser privileges.  Recent versions of sudoers will attempt to recover
     after a syntax error by ignoring the rest of the line after encountering an error.  Older versions of sudo
     will not run if sudoers contains a syntax error.

     When using netgroups of machines (as opposed to users), if you store fully qualified host name in the
     netgroup (as is usually the case), you either need to have the machine's host name be fully qualified as
     returned by the hostname command or use the fqdn option in sudoers.

BUGS

     If you believe you have found a bug in sudo, you can submit a bug report at https://bugzilla.sudo.ws/

SUPPORT

     Limited free support is available via the sudo-users mailing list, see
     https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.

DISCLAIMER

     sudo is provided “AS IS” and any express or implied warranties, including, but not limited to, the implied
     warranties of merchantability and fitness for a particular purpose are disclaimed.  See the LICENSE.md file
     distributed with sudo or https://www.sudo.ws/about/license/ for complete details.

NAME

DESCRIPTION

SUDOERS FILE FORMAT

SUDOERS OPTIONS

GROUP PROVIDER PLUGINS

EVENT LOGGING

I/O LOGGING

FILES

EXAMPLES

SECURITY NOTES

DEBUGGING

SEE ALSO

AUTHORS

CAVEATS

BUGS

SUPPORT

DISCLAIMER