Provided by: shorewall-core_5.2.8-5_all 
NAME
shorewall - Administration tool for Shoreline Firewall (Shorewall)
SYNOPSIS
shorewall[6][-lite] [options] add { interface[:host-list]... zone | zone host-list }
shorewall[6][-lite] [options] allow address
shorewall[6][-lite] [options] blacklist[!] address [option ...]
shorewall[6][-lite] [options] call function [parameter ...]
shorewall[6] [trace|debug] [options] [check | ck ] [-e] [-d] [-p] [-r] [-T] [-i] [directory]
shorewall[6][-lite] [options] clear [-f]
shorewall[6][-lite] [options] close { open-number | sourcedest [protocol [ port ]]}
shorewall[6] [trace|debug] [options] [compile | co ] [-e] [-c] [-d] [-p] [-T] [-i] [directory]
[pathname]
shorewall[6][-lite] [options] delete { interface[:host-list]... zone | zone host-list }
shorewall[6][-lite] [options] disable { interface | provider }
shorewall[6][-lite] [options] drop address
shorewall[6][-lite] [options] dump [-x] [-l] [-m] [-c]
shorewall[6][-lite] [options] enable { interface | provider }
shorewall[6] [options] export [directory1] [user@]system[:directory2]
shorewall[6][-lite] [options] forget [filename]
shorewall[6][-lite] [options] help
shorewall[-lite] [options] hits [-t]
shorewall[-lite] [options] ipcalc {address mask | address/vlsm}
shorewall[-lite] [options] iprange address1-address2
shorewall[6][-lite] [options] iptrace iptables match expression
shorewall[6][-lite] [options] logdrop address
shorewall[6][-lite] [options] logwatch [-m] [refresh-interval]
shorewall[6][-lite] [options] logreject address
shorewall[6][-lite] [options] noiptrace iptables match expression
shorewall[6][-lite] [options] open source dest [ protocol [ port ] ]
shorewall[6][-lite] [options] reenable { interface | provider }
shorewall[6][-lite] [options] reject address
shorewall[6][-lite] [options] reload [-n] [-p [-d]] [-f] [-c] [-T] [-i] [-C] [directory]
shorewall[6] remote-getcaps [-s] [-R] [-r root-user-name] [-T] [-i] [[-D]directory] [system]
shorewall[6] [options] remote-getrc [-s] [-c] [-r root-user-name] [-T] [-i] [[-D]directory] [system]
shorewall[6] [options] remote-start [-s] [-c] [-r root-user-name] [-T] [-i] [[-D]directory] [system]
shorewall[6] [options] remote-reload [-s] [-c] [-r root-user-name] [-T] [-i] [[-D]directory] [system]
shorewall[6] [options] remote-restart [-s] [-c] [-r root-user-name] [-T] [-i] [[-D]directory] [system]
shorewall[6][-lite] [options] reset [chain ...]
shorewall[6][-lite] [options] restart [-n] [-p [-d]] [-f] [-c] [-T] [-i] [-C] [directory]
shorewall[6][-lite] [options] restore [-n] [-p] [-C] [filename]
shorewall[6][-lite] [options] run command [parameter ...]
shorewall[6] [options] safe-restart [-d] [-p] [-t timeout] [directory]
shorewall[6] [options] safe-start [-d] [-p] [-t timeout] [directory]
shorewall[6][-lite] [options] save [-C] [filename]
shorewall[6][-lite] [options] savesets
shorewall[6][-lite] [options] {show | list | ls } [-x] {bl|blacklists}
shorewall[6][-lite] [options] {show | list | ls } [-b] [-x] [-l] [-t {filter|mangle|nat|raw}] [chain...]
shorewall[6][-lite] [options] {show | list | ls } [-f] capabilities
shorewall[6] [options] {show | list | ls } [-f] {actions|macros}
shorewall[6] [options] {show | list | ls } action action
shorewall[6][-lite] [options] {show | list | ls }
{classifiers|connections|config|events|filters|ip|ipa|ipsec|zones|policies|marks}
shorewall[6][-lite] [options] {show | list | ls } event event
shorewall[6][-lite] [options] {show | list | ls } [-c] routing
shorewall[6] [options] {show | list | ls } macro macro
shorewall[6][-lite] [options] {show | list | ls } [-x] {mangle|nat|raw}
shorewall[6][-lite] [options] {show | list | ls } saves
shorewall[6][-lite] [options] {show | list | ls } [-m] log
shorewall[6][-lite] [trace|debug] [options] start [-n] [-f] [-p] [-c] [-T [-i]] [-C] [directory]
shorewall[6][-lite] [options] stop [-f]
shorewall[6][-lite] [options] status [-i]
shorewall[6] [options] try directory [timeout]
shorewall[6] [options] update [-b] [-d] [-r] [-T] [-a] [-i] [-A] [directory]
shorewall[6][-lite] [options] version [-a]
DESCRIPTION
Beginning with Shorewall 5.1.0, the shorewall utility is used to control the Shoreline Firewall
(Shorewall), Shorewall Firewall 6 (Shorewall6), Shorewall Firewall Lite (Shorewall-lite) and Shorewall
Firewall 6 Lite (Shorewall6-lite). The utility may be accessed under four different names:
shorewall
Controls the Shorewall configuration when Shorewall is installed. If Shorewall is not installed, the
shorewall command controls Shorewall-lite if it is installed. If neither Shorewall nor Shorewall-lite
is installed, the shorewall command controls Shorewall6-lite if it is installed.
shorewall6
The shorewall6 command controls Shorewall6 when Shorewall6 is installed.
shorewall-lite
The shorewall-lite command controls Shorewall-lite when Shorewall-lite is installed.
shorewall6-lite
The shorewall6-lite command controls Shorewall6-lite when Shorewall6-lite is installed.
Prior to Shorewall 5.1.0, these four commands were implemented as four separate program, each of which
controlled only a single firewall package. This manpage serves to document both the Shorewall 5.1 and
Shorewall 5.0 CLI.
OPTIONS
The options are:
-4
Added in Shorewall 5.1.0. Causes the command to operate on the Shorewall configuration or the
Shorewall-lite configuration. It is the default when either of those products is installed and when
the command is shorewall or shorewall-lite.
-6
Added in Shorewall 5.1.0. Causes the command to operate on the Shorewall6 or Shorewall6-lite
configuration. It is the default when only Shorewall6-lite is installed and when the command is
shorewall6 or shorewall6-lite.
-l
Added in Shorewall 5.1.0. Causes the command to operate on either Shorewall-lite or Shorewall-6 lite
and is the default when Shorewall is not installed or when the command is shorewall-lite or
shorewall6-lite.
With all four firewall products (Shorewall, Shorewall6, Shorewall-lite and Shorewall6-lite)
installed, the following table shows the correspondence between the name used to invoke the command
and the shorewall command with the above three options.
Table 1. All four products installed
The next table shows the correspondence when only Shorewall-lite and Shorewall6-lite are installed.
Table 2. Only Shorewall-lite and Shorewall6-lite installed
Note that when Shorewall isn't installed, the 'shorewall' command behaves like shorewall-lite. The
same is not true with respect to Shorewall6, "shorewall6" and 'shorewall6-lite". You can make
'shorewall6' behave like 'shorewallt-lite' by adding the following command to root's .profile file
(or to .bashrc, if root's shell is bash):
alias shorewall6=shorewall6-lite
-v[verbosity]
Alters the amount of output produced by the command. If neither the -v nor -q option are specified,
the amount of output is determined by the VERBOSITY setting in shorewall.conf[1](5)
(shorewall6.conf[1](5)).
When no verbosity is specified, each instance of this option causes 1 to be added to the effective
verbosity. When verbosity (-1,0,1 or 2) is given, the command is executed at the specified VERBOSITY.
There may be no white-space between -v and the verbosity.
-q
Alters the amount of output produced by the command. If neither the -v nor -q option are specified,
the amount of output is determined by the VERBOSITY setting in shorewall.conf[1](5)
(shorewall6.conf[1](5)).
Each instance of this option causes 1 to be subtracted from the effective verbosity.
-t
Causes all progress messages to be timestamped.
-T
Added in Shorewall 5.2.4 to replace the earlier trace keyword.. If the command invokes the generated
firewall script, the script's execution will be traced to standard error.
-D
Added in Shorewall 5.2.4 to replace the earlier debug keyword. If the command invokes the generated
firewall script, individual invocations of the ip[6]tables utility will be used to configure the
ruleset rather than ip[6]tables-restore. This is useful for diagnosing ip[6]tables-restore failures
on a *COMMIT command.
Note
Prior to Shorewall 5.2.4, the general syntax for a CLI command was:
[trace|debug] [nolock] [options] command [command-options] [command-arguments]
Examples:
shorewall debug -tv2 reload
shorewall trace check
shorewall nolock enable eth0
In Shorewall 5.2.4 and later, those commands would be:
shorewall -Dtv2 reload
shorewall check -D
shorewall -N enable eth0
While not shown in the command synopses at the top of this page, the nolock keyword is still
supported in Shorewall 5.2.4 and later, but is deprecated in favor of the -N option.
COMMANDS
The available commands are listed below.
add { interface[:host-list]... zone | zone host-list }
Adds a list of hosts or subnets to a dynamic zone usually used with VPN's.
The interface argument names an interface defined in the shorewall-interfaces[2](5)
(shorewall6-interfaces[2](5))file. A host-list is comma-separated list whose elements are host or
network addresses..if n .sp
Caution
The add command is not very robust. If there are errors in the host-list, you may see a large
number of error messages yet a subsequent shorewall show zones command will indicate that all
hosts were added. If this happens, replace add by delete and run the same command again. Then
enter the correct command.
Beginning with Shorewall 4.5.9, the dynamic_shared zone option
(shorewall-zones[3](5),shorewall6-zones[3](5)) allows a single ipset to handle entries for multiple
interfaces. When that option is specified for a zone, the add command has the alternative syntax in
which the zone name precedes the host-list.
allow address
Re-enables receipt of packets from hosts previously blacklisted by a blacklist, drop, logdrop,
reject, or logreject command.
blacklist[!] address [ option ... ]
Added in Shorewall 5.0.8 and requires DYNAMIC_BLACKLIST=ipset.. in shorewall.conf[1](5). Causes
packets from the given host or network address to be dropped, based on the setting of BLACKLIST in
shorewall.conf[1](5). The address along with any options are passed to the ipset add command.
Probably the most useful option is the timeout option. For example, to permanently blacklist
192.0.2.22, the command would be:
shorewall blacklist 192.0.2.22 timeout 0
Beginning with Shorewall 5.2.5, the above command can be shortened to:
shorewall blacklist! 192.0.2.22
If the disconnect option is specified in the DYNAMIC_BLACKLISTING setting, then the effective
VERBOSITY determines the amount of information displayed:
• If the effective verbosity is > 0, then a message giving the number of conntrack flows deleted by
the command is displayed.
• If the effective verbosity is > 1, then the conntrack table entries deleted by the command are
also displayed.
call function [ parameter ... ]
Added in Shorewall 4.6.10. Allows you to call a function in one of the Shorewall libraries or in your
compiled script. function must name the shell function to be called. The listed parameters are passed
to the function.
The function is first searched for in lib.base, lib.common, lib.cli and lib.cli-std. If it is not
found, the call command is passed to the generated script to be executed.
check [-e] [-d] [-p] [-r] [-T] [-i] [-D][directory]
Not available with Shorewall[6]-lite.
Compiles the configuration in the specified directory and discards the compiled output script. If no
directory is given, then /etc/shorewall is assumed.
The -e option causes the compiler to look for a file named capabilities. This file is produced using
the command shorewall-lite show -f capabilities > capabilities on a system with Shorewall Lite
installed.
The -d option causes the compiler to be run under control of the Perl debugger.
The -p option causes the compiler to be profiled via the Perl -wd:DProf command-line option.
The -r option was added in Shorewall 4.5.2 and causes the compiler to print the generated ruleset to
standard out.
The -T option was added in Shorewall 4.4.20 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the current
line contains alternative input specifications following a semicolon (";"). Such lines will be
handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5) (shorewall6.conf[1](5)).
The -D option was added in Shoewall 5.2.4 and causes the compiler to write a large amount of
debugging information to standard output.
clear [-f]
Clear will remove all rules and chains installed by Shorewall. The firewall is then wide open and
unprotected. Existing connections are untouched. Clear is often used to see if the firewall is
causing connection problems.
If -f is given, the command will be processed by the compiled script that executed the last
successful start, restart or reload command if that script exists.
close { open-number | source dest [ protocol [ port ] ] }
Added in Shorewall 4.5.8. This command closes a temporary open created by the open command. In the
first form, an open-number specifies the open to be closed. Open numbers are displayed in the num
column of the output of the shorewall show opens command.
When the second form of the command is used, the parameters must match those given in the earlier
open command.
This command requires that the firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
shorewall.conf (5)[1].
compile [-e] [-c] [-d] [-p] [-T] [-i] [-D] [ directory ] [ pathname ]
Not available with shorewall[6]-lite.
Compiles the current configuration into the executable file pathname. If a directory is supplied,
Shorewall will look in that directory first for configuration files. If the pathname is omitted, the
file firewall in the VARDIR (normally /var/lib/shorewall/) is assumed. A pathname of '-' causes the
compiler to send the generated script to it's standard output file. Note that '-v-1' is usually
specified in this case (e.g., shorewall -v-1 compile -- -) to suppress the 'Compiling...' message
normally generated by /sbin/shorewall.
When -e is specified, the compilation is being performed on a system other than where the compiled
script will run. This option disables certain configuration options that require the script to be
compiled where it is to be run. The use of -e requires the presence of a configuration file named
capabilities which may be produced using the command shorewall-lite show -f capabilities >
capabilities on a system with Shorewall Lite installed
The -c option was added in Shorewall 4.5.17 and causes conditional compilation of a script. The
script specified by pathname (or implied if pathname is omitted) is compiled if it doesn't exist or
if there is any file in the directory or in a directory on the CONFIG_PATH that has a modification
time later than the file to be compiled. When no compilation is needed, a message is issued and an
exit status of zero is returned.
The -d option causes the compiler to be run under control of the Perl debugger.
The -p option causes the compiler to be profiled via the Perl -wd:DProf command-line option.
The -T option was added in Shorewall 4.4.20 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the current
line contains alternative input specifications following a semicolon (";"). Such lines will be
handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5) (shorewall6.conf[1](5)).
The -D option was added in Shoewall 5.2.4 and causes the compiler to write a large amount of
debugging information to standard output.
delete { interface[:host-list]... zone | zone host-list }
The delete command reverses the effect of an earlier add command.
The interface argument names an interface defined in the shorewall-interfaces[2](5)
(shorewall6-interfaces[2](5) file. A host-list is comma-separated list whose elements are a host or
network address.
Beginning with Shorewall 4.5.9, the dynamic_shared zone option (shorewall-zones[3](5),
shorewall6-zones[3](5)) allows a single ipset to handle entries for multiple interfaces. When that
option is specified for a zone, the delete command has the alternative syntax in which the zone name
precedes the host-list.
disable { interface | provider }
Added in Shorewall 4.4.26. Disables the optional provider associated with the specified interface or
provider. Where more than one provider share a single network interface, a provider name must be
given.
Beginning with Shorewall 4.5.10, this command may be used with any optional network interface.
interface may be either the logical or physical name of the interface. The command removes any routes
added from shorewall-routes[4](5) (shorewall6-routes[4](5))and any traffic shaping configuration for
the interface.
drop address
Causes traffic from the listed addresses to be silently dropped. This command requires that the
firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in shorewall.conf (5)[1].
dump [-x] [-l] [-m] [-c]
Produces a verbose report about the firewall configuration for the purpose of problem analysis.
The -x option causes actual packet and byte counts to be displayed. Without that option, these counts
are abbreviated.
The -m option causes any MAC addresses included in Shorewall log messages to be displayed.
The -l option causes the rule number for each Netfilter rule to be displayed.
The -c option causes the route cache to be dumped in addition to the other routing information.
enable { interface | provider }
Added in Shorewall 4.4.26. Enables the optional provider associated with the specified interface or
provider. Where more than one provider share a single network interface, a provider name must be
given.
Beginning with Shorewall 4.5.10, this command may be used with any optional network interface.
interface may be either the logical or physical name of the interface. The command sets /proc entries
for the interface, adds any route specified in shorewall-routes[4](5) (shorewall6-routes[4](5)) and
installs the interface's traffic shaping configuration, if any.
export [ directory1 ] [ user@]system[:directory2 ]
Not available with Shorewall[6]-lite.
If directory1 is omitted, the current working directory is assumed.
Allows a non-root user to compile a shorewall script and stage it on a system (provided that the user
has access to the system via ssh). The command is equivalent to:
/sbin/shorewall compile -e directory1 directory1/firewall &&\
scp directory1/firewall directory1/firewall.conf [user@]system:[directory2]
In other words, the configuration in the specified (or defaulted) directory is compiled to a file
called firewall in that directory. If compilation succeeds, then firewall and firewall.conf are
copied to system using scp.
forget [ filename ]
Deletes /var/lib/shorewall/filename and /var/lib/shorewall/save. If no filename is given then the
file specified by RESTOREFILE in shorewall.conf[1](5) (shorewall6.conf[1](5)) is assumed.
help
Displays a syntax summary.
hits [-t]
Generates several reports from Shorewall log messages in the current log file. If the -t option is
included, the reports are restricted to log messages generated today. Not available with
Shorewall6[-lite].
ipcalc { address mask | address/vlsm }
Ipcalc displays the network address, broadcast address, network in CIDR notation and netmask
corresponding to the input[s]. Not available with Shorewall6[-lite].
iprange address1-address2
Iprange decomposes the specified range of IP addresses into the equivalent list of network/host
addresses. Not available with Shorewall6[-lite].
iptrace iptables match expression
This is a low-level debugging command that causes iptables TRACE log records to be created. See
iptables(8) for details.
The iptables match expression must be one or more matches that may appear in both the raw table
OUTPUT and raw table PREROUTING chains.
The log message destination is determined by the currently-selected IPv4 or IPv6 logging backend[5].
list
list is a synonym for show -- please see below.
logdrop address
Causes traffic from the listed addresses to be logged then discarded. Logging occurs at the log level
specified by the BLACKLIST_LOGLEVEL setting in shorewall.conf[1] (5) (shorewall6.conf[1](5)). This
command requires that the firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
shorewall.conf (5)[1].
logwatch [-m] [ refresh-interval ]
Monitors the log file specified by the LOGFILE option in shorewall.conf[1](5) (shorewall6.conf[1](5))
and produces an audible alarm when new Shorewall messages are logged. The -m option causes the MAC
address of each packet source to be displayed if that information is available. The refresh-interval
specifies the time in seconds between screen refreshes. You can enter a negative number by preceding
the number with "--" (e.g., shorewall logwatch -- -30). In this case, when a packet count changes,
you will be prompted to hit any key to resume screen refreshes.
logreject address
Causes traffic from the listed addresses to be logged then rejected. Logging occurs at the log level
specified by the BLACKLIST_LOGLEVEL setting in shorewall.conf[1] (5), (shorewall6.conf[1](5)). This
command requires that the firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
shorewall.conf (5)[1].
ls
ls is a synonym for show -- please see below.
noiptrace iptables match expression
This is a low-level debugging command that cancels a trace started by a preceding iptrace command.
The iptables match expression must be one given in the iptrace command being canceled.
open source dest [ protocol [ port ] ]
Added in Shorewall 4.6.8. This command requires that the firewall be in the started state and that
DYNAMIC_BLACKLIST=Yes in shorewall.conf (5)[1]. The effect of the command is to temporarily open the
firewall for connections matching the parameters.
The source and dest parameters may each be specified as all if you don't wish to restrict the
connection source or destination respectively. Otherwise, each must contain a host or network address
or a valid DNS name.
The protocol may be specified either as a number or as a name listed in /etc/protocols. The port may
be specified numerically or as a name listed in /etc/services.
To reverse the effect of a successful open command, use the close command with the same parameters or
simply restart the firewall.
Example: To open the firewall for SSH connections to address 192.168.1.1, the command would be:
shorewall open all 192.168.1.1 tcp 22
To reverse that command, use:
shorewall close all 192.168.1.1 tcp 22
reenable{ interface | provider }
Added in Shorewall 4.6.9. This is equivalent to a disable command followed by an enable command on
the specified interface or provider.
reject address
Causes traffic from the listed addresses to be silently rejected. This command requires that the
firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in shorewall.conf (5)[1].
reload [-n] [-p] [-d] [-f] [-c] [-T] [-i] [-C] [-D] [ directory ]
This command was re-implemented in Shorewall 5.0.0. The pre-5.0.0 reload command is now called
remote-restart (see below).
Shorewall and Shorewall6
Reload is similar to shorewall start except that it assumes that the firewall is already started.
Existing connections are maintained. If a directory is included in the command, Shorewall will
look in that directory first for configuration files.
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -d option causes the compiler to run under the Perl debugger.
The -f option suppresses the compilation step and simply reused the compiled script which last
started/restarted Shorewall, provided that /etc/shorewall and its contents have not been modified
since the last start/restart.
The -c option was added in Shorewall 4.4.20 and performs the compilation step unconditionally,
overriding the AUTOMAKE setting in shorewall.conf[1](5) (Shorewall and Shorewall6 only). When
both -f and -c are present, the result is determined by the option that appears last.
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the
current line contains alternative input specifications following a semicolon (";"). Such lines
will be handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5)
(shorewall6.conf[1](5))..
The -C option was added in Shorewall 4.6.5 and is only meaningful when AUTOMAKE=Yes in
shorewall.conf[1](5) (shorewall6.conf[1](5)). If an existing firewall script is used and if that
script was the one that generated the current running configuration, then the running netfilter
configuration will be reloaded as is so as to preserve the iptables packet and byte counters.
The -D option was added in Shoewall 5.2.4 and causes the compiler to write a large amount of
debugging information to standard output.
Shorewall-lite and Shorewall6-lite
Reload is similar to shorewall start except that it assumes that the firewall is already started.
Existing connections are maintained.
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -C option was added in Shorewall 4.6.5 If the existing firewall script is the one that
generated the current running configuration, then the running netfilter configuration will be
reloaded as is so as to preserve the iptables packet and byte counters.
remote-getcaps [-R] [-r root-user-name] [ [ -D ] directory ] [ system ]
Added in Shoreall 5.2.0, this command executes shorewall[6]-lite show capabilities -f >
/var/lib/shorewall[6]-lite/capabilities on the remote system via ssh then the generated file is
copied to directory on the local system. If no directory is given, the current working directory is
assumed.
if -R is included, the remote shorewallrc file is also copied to directory.
If -r is included, it specifies that the root user on system is named root-user-name rather than
"root".
remote-getrc [-c] [-r root-user-name] [ [ -D ] directory ] [ system ]
Added in Shoreall 5.2.0, this command copies the shorewallrc file from the remote system to directory
on the local system. If no directory is given, the current working directory is assumed.
if -c is included, the remote capabilities are also copied to directory, as is done by the
remote-getcaps command.
If -r is included, it specifies that the root user on system is named root-user-name rather than
"root".
remote-start [-n] [-s] [-c] [-r root-user-name] [-T] [-i] [ [ -D ] directory ] [ system ]
This command was renamed from load in Shorewall 5.0.0 and is only available in Shorewall and
Shoreawall6.
If directory is omitted, the current working directory is assumed. Allows a non-root user to compile
a shorewall script and install it on a system (provided that the user has root access to the system
via ssh). The command is equivalent to:
/sbin/shorewall compile -e directory directory/firewall &&\
scp directory/firewall directory/firewall.conf root@system:/var/lib/shorewall-lite/ &&\
ssh root@system '/sbin/shorewall-lite start'
In other words, the configuration in the specified (or defaulted) directory is compiled to a file
called firewall in that directory. If compilation succeeds, then firewall is copied to system using
scp. If the copy succeeds, Shorewall Lite on system is started via ssh. Beginning with Shorewall
5.0.13, if system is omitted, then the FIREWALL option setting in shorewall.conf[6](5)
(shorewall6.conf(5)[1]) is assumed. In that case, if you want to specify a directory, then the -D
option must be given.
The -n option causes Shorewall to avoid updating the routing table(s).
If -s is specified and the start command succeeds, then the remote Shorewall-lite configuration is
saved by executing shorewall-lite save via ssh.
if -c is included, the command shorewall[6]-lite show capabilities -f >
/var/lib/shorewall[6]-lite/capabilities is executed via ssh then the generated file is copied to
directory using scp. This step is performed before the configuration is compiled.
If -r is included, it specifies that the root user on system is named root-user-name rather than
"root".
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
remote-reload [-s] [-c] [-r root-user-name] [-T] [-i] [ [ -D ] directory ] [ system ]
This command was added in Shorewall 5.0.0 and is only available in Shorewall and Shorewall6.
If directory is omitted, the current working directory is assumed. Allows a non-root user to compile
a shorewall script and install it on a system (provided that the user has root access to the system
via ssh). The command is equivalent to:
/sbin/shorewall compile -e directory directory/firewall &&\
scp directory/firewall directory/firewall.conf root@system:/var/lib/shorewall-lite/ &&\
ssh root@system '/sbin/shorewall-lite reload'
In other words, the configuration in the specified (or defaulted) directory is compiled to a file
called firewall in that directory. If compilation succeeds, then firewall is copied to system using
scp. If the copy succeeds, Shorewall Lite on system is restarted via ssh. Beginning with Shorewall
5.0.13, if system is omitted, then the FIREWALL option setting in shorewall6.conf(5)[1]
(shorewall6.conf[1](5)) is assumed. In that case, if you want to specify a directory, then the -D
option must be given.
If -s is specified and the restart command succeeds, then the remote Shorewall-lite configuration is
saved by executing shorewall-lite save via ssh.
if -c is included, the command shorewall-lite show capabilities -f >
/var/lib/shorewall-lite/capabilities is executed via ssh then the generated file is copied to
directory using scp. This step is performed before the configuration is compiled.
If -r is included, it specifies that the root user on system is named root-user-name rather than
"root".
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the current
line contains alternative input specifications following a semicolon (";"). Such lines will be
handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5) (shorewall6.conf[1](5)).
remote-restart [-s] [-c] [-r root-user-name] [-T] [-i] [ [ -D ] directory ] [ system ]
This command was renamed from reload in Shorewall 5.0.0 and is available in Shorewall and Shorewall6
only.
If directory is omitted, the current working directory is assumed. Allows a non-root user to compile
a shorewall script and install it on a system (provided that the user has root access to the system
via ssh). The command is equivalent to:
/sbin/shorewall compile -e directory directory/firewall &&\
scp directory/firewall directory/firewall.conf root@system:/var/lib/shorewall-lite/ &&\
ssh root@system '/sbin/shorewall-lite restart'
In other words, the configuration in the specified (or defaulted) directory is compiled to a file
called firewall in that directory. If compilation succeeds, then firewall is copied to system using
scp. If the copy succeeds, Shorewall Lite on system is restarted via ssh. Beginning with Shorewall
5.0.13, if system is omitted, then the FIREWALL option setting in shorewall6.conf(5)[1]
(shorewall6.conf[1](5)) is assumed. In that case, if you want to specify a directory, then the -D
option must be given.
If -s is specified and the restart command succeeds, then the remote Shorewall-lite configuration is
saved by executing shorewall-lite save via ssh.
if -c is included, the command shorewall-lite show capabilities -f >
/var/lib/shorewall-lite/capabilities is executed via ssh then the generated file is copied to
directory using scp. This step is performed before the configuration is compiled.
If -r is included, it specifies that the root user on system is named root-user-name rather than
"root".
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the current
line contains alternative input specifications following a semicolon (";"). Such lines will be
handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5) (shorewall6.conf[1](5).
reset [chain, ...]
Resets the packet and byte counters in the specified chain(s). If no chain is specified, all the
packet and byte counters in the firewall are reset.
Beginning with Shorewall 5.0.0, chain may be composed of both a table name and a chain name separated
by a colon (e.g., mangle:PREROUTING). Chain names following that don't include a table name are
assumed to be in that same table. If no table name is given in the command, the filter table is
assumed.
restart [-n] [-p] [-d] [-f] [-c] [-T] [-i] [-C] [-D] [ directory ]
Beginning with Shorewall 5.0.0, this command performs a true restart. The firewall is completely
stopped as if a stop command had been issued then it is started again.
Shorewall and Shorewall6
If a directory is included in the command, Shorewall will look in that directory first for
configuration files.
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -d option causes the compiler to run under the Perl debugger.
The -f option suppresses the compilation step and simply reused the compiled script which last
started/restarted Shorewall, provided that /etc/shorewall and its contents have not been modified
since the last start/restart.
The -c option was added in Shorewall 4.4.20 and performs the compilation step unconditionally,
overriding the AUTOMAKE setting in shorewall.conf[1](5). When both -f and -c are present, the
result is determined by the option that appears last.
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the
current line contains alternative input specifications following a semicolon (";"). Such lines
will be handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5).
The -C option was added in Shorewall 4.6.5 and is only meaningful when AUTOMAKE=Yes in
shorewall.conf[1](5). If an existing firewall script is used and if that script was the one that
generated the current running configuration, then the running netfilter configuration will be
reloaded as is so as to preserve the iptables packet and byte counters.
The -D option was added in Shoewall 5.2.4 and causes the compiler to write a large amount of
debugging information to standard output.
Shorewall-lite and Shorewall6-lite
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -C option was added in Shorewall 4.6.5 If the existing firewall script is the one that
generated the current running configuration, then the running netfilter configuration will be
reloaded as is so as to preserve the iptables packet and byte counters.
restore [-n] [-p] [-C] [ filename ]
Restore Shorewall to a state saved using the shorewall save command. Existing connections are
maintained. The filename names a restore file in /var/lib/shorewall created using shorewall save; if
no filename is given then Shorewall will be restored from the file specified by the RESTOREFILE
option in shorewall.conf[1](5) (shorewall6.conf[1](5)).
Caution
If your iptables ruleset depends on variables that are detected at run-time, either in your
params file or by Shorewall-generated code, restore will use the values that were current when
the ruleset was saved, which may be different from the current values.
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option, added in Shorewall 4.6.5, causes the connection tracking table to be flushed; the
conntrack utility must be installed to use this option.
The -C option was added in Shorewall 4.6.5. If the -C option was specified during shorewall save,
then the counters saved by that operation will be restored.
run command [ parameter ... ]
Added in Shorewall 4.6.3. Executes command in the context of the generated script passing the
supplied parameters. Normally, the command will be a function declared in lib.private.
Before executing the command, the script will detect the configuration, setting all SW_* variables
and will run your init extension script with $COMMAND = 'run'.
If there are files in the CONFIG_PATH that were modified after the current firewall script was
generated, the following warning message is issued:
WARNING: /var/lib/shorewall/firewall is not up to
date
safe-reload [-d] [-p] [-t timeout ] [ directory ]
Added in Shorewall 5.0.0, this command performs the same function as did safe_restart in earlier
releases. The command is available in Shorewall and Shorewall6 only.
Only allowed if Shorewall is running. The current configuration is saved in
/var/lib/shorewall/safe-reload (see the save command below) then a shorewall reload is done. You will
then be prompted asking if you want to accept the new configuration or not. If you answer "n" or if
you fail to answer within 60 seconds (such as when your new configuration has disabled communication
with your terminal), the configuration is restored from the saved configuration. If a directory is
given, then Shorewall will look in that directory first when opening configuration files.
Beginning with Shorewall 4.5.0, you may specify a different timeout value using the -t option. The
numeric timeout may optionally be followed by an s, m or h suffix (e.g., 5m) to specify seconds,
minutes or hours respectively. If the suffix is omitted, seconds is assumed.
safe-restart [-d] [-p] [-t timeout ] [ directory ]
Only allowed if Shorewall[6] is running and is not available in Shorewall-lite and Shorewall6-lite.
The current configuration is saved in /var/lib/shorewall/safe-restart (see the save command below)
then a shorewall restart is done. You will then be prompted asking if you want to accept the new
configuration or not. If you answer "n" or if you fail to answer within 60 seconds (such as when your
new configuration has disabled communication with your terminal), the configuration is restored from
the saved configuration. If a directory is given, then Shorewall will look in that directory first
when opening configuration files.
Beginning with Shorewall 4.5.0, you may specify a different timeout value using the -t option. The
numeric timeout may optionally be followed by an s, m or h suffix (e.g., 5m) to specify seconds,
minutes or hours respectively. If the suffix is omitted, seconds is assumed.
safe-start [-d] [-p] [-ttimeout ] [ directory ]
Shorewall is started normally. You will then be prompted asking if everything went all right. If you
answer "n" or if you fail to answer within 60 seconds (such as when your new configuration has
disabled communication with your terminal), a shorewall clear is performed for you. If a directory is
given, then Shorewall will look in that directory first when opening configuration files.
Beginning with Shorewall 4.5.0, you may specify a different timeout value using the -t option. The
numeric timeout may optionally be followed by an s, m or h suffix (e.g., 5m) to specify seconds,
minutes or hours respectively. If the suffix is omitted, seconds is assumed.
This command is available in Shorewall and Shorewall6 only.
save [-C] [ filename ]
Creates a snapshot of the currently running firewall. The dynamic blacklist is stored in
/var/lib/shorewall/save. The state of the firewall is stored in /var/lib/shorewall/filename for use
by the shorewall restore command. If filename is not given then the state is saved in the file
specified by the RESTOREFILE option in shorewall.conf[1](5) (shorewall6.conf[1](5)).
The -C option, added in Shorewall 4.6.5, causes the iptables packet and byte counters to be saved
along with the chains and rules.
savesets
Added in shorewall 4.6.8. Performs the same action as the stop command with respect to saving ipsets
(see the SAVE_IPSETS option in shorewall.conf[1] (5) (shorewall6.conf[1](5)). This command may be
used to proactively save your ipset contents in the event that a system failure occurs prior to
issuing a stop command.
show
The show command can have a number of different arguments:
action action
Lists the named action file. Available on Shorewall and Shorewall6 only.
actions
Produces a report about the available actions (built-in, standard and user-defined). Available on
Shorewall and Shorewall6 only.
bl|blacklists [-x]
Added in Shorewall 4.6.2. Displays the dynamic chain along with any chains produced by entries in
shorewall-blrules(5). The -x option is passed directly through to iptables and causes actual
packet and byte counts to be displayed. Without this option, those counts are abbreviated.
[-f] capabilities
Displays your kernel/iptables capabilities. The -f option causes the display to be formatted as a
capabilities file for use with compile -e.
[-b] [-x] [-l] [-t {filter|mangle|nat|raw}] [ chain... ]
The rules in each chain are displayed using the iptables -L chain -n -v command. If no chain is
given, all of the chains in the filter table are displayed. The -x option is passed directly
through to iptables and causes actual packet and byte counts to be displayed. Without this
option, those counts are abbreviated. The -t option specifies the Netfilter table to display. The
default is filter.
The -b ('brief') option causes rules which have not been used (i.e. which have zero packet and
byte counts) to be omitted from the output. Chains with no rules displayed are also omitted from
the output.
The -l option causes the rule number for each Netfilter rule to be displayed.
If the -t option and the chain keyword are both omitted and any of the listed chains do not
exist, a usage message is displayed.
classifiers|filters
Displays information about the packet classifiers defined on the system as a result of traffic
shaping configuration. Beginning with Shorewall 5.2.8, this command is deprecated, as its output
is included in the information displayed by the 'show tc' command.
config
Displays distribution-specific defaults.
connections [filter_parameter ...]
Displays the IP connections currently being tracked by the firewall.
If the conntrack utility is installed, beginning with Shorewall 4.6.11 the set of connections
displayed can be limited by including conntrack filter parameters (-p , -s, --dport, etc). See
conntrack(8) for details.
event event
Added in Shorewall 4.5.19. Displays the named event.
events
Added in Shorewall 4.5.19. Displays all events.
ip
Displays the system's IPv4 configuration.
ipa
Added in Shorewall 4.4.17. Displays the per-IP accounting counters (shorewall-accounting[7] (5),
shorewall6-accounting[7](5)).
ipsec
Added in Shorewall 5.1.0. Displays the contents of the IPSEC Security Policy Database (SPD) and
Security Association Database (SAD). SAD keys are not displayed.
[-m] log
Displays the last 20 Shorewall messages from the log file specified by the LOGFILE option in
shorewall.conf[1](5) (shorewall6.conf[1](5)). The -m option causes the MAC address of each packet
source to be displayed if that information is available.
macros
Displays information about each macro defined on the firewall system (Shorewall and Shorewall6
only)
macro macro
Added in Shorewall 4.4.6. Displays the file that implements the specified macro (usually
/usr/share/shorewall/macro.macro). Available only in Shorewall and Shorewall6.
[-x] mangle
Displays the Netfilter mangle table using the command iptables -t mangle -L -n -v. The -x option
is passed directly through to iptables and causes actual packet and byte counts to be displayed.
Without this option, those counts are abbreviated.
marks
Added in Shorewall 4.4.26. Displays the various fields in packet marks giving the min and max
value (in both decimal and hex) and the applicable mask (in hex).
[-x] nat
Displays the Netfilter nat table using the command iptables -t nat -L -n -v. The -x option is
passed directly through to iptables and causes actual packet and byte counts to be displayed.
Without this option, those counts are abbreviated.
opens
Added in Shorewall 4.5.8. Displays the iptables rules in the 'dynamic' chain created through use
of the open command..
policies
Added in Shorewall 4.4.4. Displays the applicable policy between each pair of zones. Note that
implicit intrazone ACCEPT policies are not displayed for zones associated with a single network
where that network doesn't specify routeback.
rc
Added in Shorewall 5.2.0. Displays the contents of $SHAREDIR/shorewall/shorewallrc.
[-c] routing
Displays the system's IPv4 routing configuration. The -c option causes the route cache to be
displayed along with the other routing information.
[-x] raw
Displays the Netfilter raw table using the command iptables -t raw -L -n -v. The -x option is
passed directly through to iptables and causes actual packet and byte counts to be displayed.
Without this option, those counts are abbreviated.
saves
Added in Shorewall 5.2.0. Lists snapshots created by the save command. Each snapshot is listed
with the date and time when it was taken. If there is a snapshot with the name specified in the
RESTOREFILE option in shorewall.conf(5[6]), that snapshot is listed as the default snapshot for
the restore command.
tc
Displays information about queuing disciplines, classes and filters.
zones
Displays the current composition of the Shorewall zones on the system.
start [-n] [-p] [-d] [-f] [-c] [-T] [-i] [-C] [-D] [ directory ]
Shorewall and Shorewall6
Start shorewall[6]. Existing connections through shorewall managed interfaces are untouched. New
connections will be allowed only if they are allowed by the firewall rules or policies. If a
directory is included in the command, Shorewall will look in that directory first for
configuration files. If -f is specified, the saved configuration specified by the RESTOREFILE
option in shorewall.conf[1](5) (shorewall6.conf[1](5)) will be restored if that saved
configuration exists and has been modified more recently than the files in /etc/shorewall. When
-f is given, a directory may not be specified.
Update: In Shorewall 4.4.20, a new LEGACY_FASTSTART option was added to shorewall.conf[1](5)
(shorewall6.conf[1](5)). When LEGACY_FASTSTART=No, the modification times of files in
/etc/shorewall are compared with that of /var/lib/shorewall/firewall (the compiled script that
last started/restarted the firewall).
The -n option causes Shorewall to avoid updating the routing table(s).
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -c option was added in Shorewall 4.4.20 and performs the compilation step unconditionally,
overriding the AUTOMAKE setting in shorewall.conf[1](5) (shorewall6.conf[1](5)). When both -f and
-care present, the result is determined by the option that appears last.
The -T option was added in Shorewall 4.5.3 and causes a Perl stack trace to be included with each
compiler-generated error and warning message.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the
current line contains alternative input specifications following a semicolon (";"). Such lines
will be handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf(5)[1]
(shorewall6.conf[1](5)).
The -C option was added in Shorewall 4.6.5 and is only meaningful when the -f option is also
specified. If the previously-saved configuration is restored, and if the -C option was also
specified in the save command, then the packet and byte counters will be restored.
The -D option was added in Shoewall 5.2.4 and causes the compiler to write a large amount of
debugging information to standard output.
Shorewall-lite and Shorewall6-lite
Start Shorewall[6] Lite. Existing connections through shorewall[6]-lite managed interfaces are
untouched. New connections will be allowed only if they are allowed by the firewall rules or
policies.
The -p option causes the connection tracking table to be flushed; the conntrack utility must be
installed to use this option.
The -n option prevents the firewall script from modifying the current routing configuration.
The -f option was added in Shorewall 4.6.5. If the RESTOREFILE named in shorewall.conf[6](5)
exists, is executable and is not older than the current filewall script, then that saved
configuration is restored.
The -C option was added in Shorewall 4.6.5 and is only meaningful when the -f option is also
specified. If the previously-saved configuration is restored, and if the -C option was also
specified in the save command, then the packet and byte counters will be restored.
stop
Stops the firewall. All existing connections, except those listed in shorewall-stoppedrules[8](5) or
permitted by the ADMINISABSENTMINDED option in shorewall.conf[1], are taken down. The only new
traffic permitted through the firewall is from systems listed in shorewall-stoppedrules[8](5) or by
ADMINISABSENTMINDED.
status [-i]
Produces a short report about the state of the Shorewall-configured firewall.
The -i option was added in Shorewall 4.6.2 and causes the status of each optional or provider
interface to be displayed.
try directory [ timeout ]
This command is available in Shorewall and Shorewall6 only.
If Shorewall[6] is started then the firewall state is saved to a temporary saved configuration
(/var/lib/shorewall/.try). Next, if Shorewall[6] is currently started then a restart command is
issued using the specified configuration directory; otherwise, a start command is performed using the
specified configuration directory. if an error occurs during the compilation phase of the restart or
start, the command terminates without changing the Shorewall[6] state. If an error occurs during the
restart phase, then a shorewall restore is performed using the saved configuration. If an error
occurs during the start phase, then Shorewall is cleared. If the start/restart succeeds and a timeout
is specified then a clear or restore is performed after timeout seconds.
Beginning with Shorewall 4.5.0, the numeric timeout may optionally be followed by an s, m or h suffix
(e.g., 5m) to specify seconds, minutes or hours respectively. If the suffix is omitted, seconds is
assumed.
update [-d] [-r] [-T] [-a] [-i] [-A] [ directory ]
This command is available only in Shorewall and Shorewall6.
Added in Shorewall 4.4.21 and causes the compiler to update /etc/shorewall/shorewall.conf then
validate the configuration. The update will add options not present in the old file with their
default values, and will move deprecated options with non-defaults to a deprecated options section at
the bottom of the file. Your existing shorewall.conf file is renamed shorewall.conf.bak.
The command was extended over the years with a set of options that caused additional configuration
updates.
• Convert an existing blacklist file into an equivalent blrules file.
• Convert an existing routestopped file into an equivalent stoppedrules file.
• Convert existing tcrules and tos files into an equivalent mangle file.
• Convert an existing notrack file into an equivalent conntrack file.
• Convert FORMAT, SECTION and COMMENT entries into ?FORMAT, ?SECTION and ?COMMENT directives.
In each case, the old file is renamed with a .bak suffix.
In Shorewall 5.0.0, the options were eliminated and the update command performs all of the updates
described above.
Important
There are some notable restrictions with the update command:
1. Converted rules will be appended to the existing file; if there is no existing file in the
CONFIG_PATH, one will be created in the directory specified in the command or in the first
entry in the CONFIG_PATH (normally /etc/shorewall) otherwise.
2. Existing comments in the file being converted will not be transferred to the output file.
3. With the exception of the notrack->conntrack conversion, INCLUDEd files will be expanded
inline in the output file.
4. Columns in the output file will be separated by a single tab character; there is no attempt
made to otherwise align the columns.
5. Prior to Shorewall 5.0.15, shell variables will be expanded in the output file.
6. Prior to Shorewall 5.0.15, lines omitted by compiler directives (?if ...., etc.) will not
appear in the output file.
Important
Because the translation of the 'blacklist' and 'routestopped' files is not 1:1, omitted
lines and compiler directives are not transferred to the converted files. If either are
present, the compiler issues a warning:
WARNING: "Omitted rules and compiler directives were not translated
The -a option causes the updated shorewall.conf file to be annotated with documentation.
The -i option was added in Shorewall 4.6.0 and causes a warning message to be issued if the current
line contains alternative input specifications following a semicolon (";"). Such lines will be
handled incorrectly if INLINE_MATCHES is set to Yes in shorewall.conf[1](5).
The -A option is included for compatibility with Shorewall 4.6 and is equivalent to specifying the -i
option.
For a description of the other options, see the check command above.
version [-a]
Displays Shorewall's version. The -a option is included for compatibility with earlier Shorewall
releases and is ignored.
EXIT STATUS
In general, when a command succeeds, status 0 is returned; when the command fails, a non-zero status is
returned.
The status command returns exit status as follows:
0 - Firewall is started.
3 - Firewall is stopped or cleared
4 - Unknown state; usually means that the firewall has never been started.
ENVIRONMENT
Two environmental variables are recognized by Shorewall:
SHOREWALL_INIT_SCRIPT
When set to 1, causes Std out to be redirected to the file specified in the STARTUP_LOG option in
shorewall.conf(5)[6].
SW_LOGGERTAG
Added in Shorewall 5.0.8. When set to a non-empty value, that value is passed to the logger utility
in its -t (--tag) option.
FILES
/etc/shorewall/*
/etc/shorewall6/*
SEE ALSO
https://shorewall.org/starting_and_stopping_shorewall.htm[9]
- Describes operational aspects of Shorewall.
shorewall-files(5)[10] -
Describes the various configuration files along with features and
conventions common to those files.
shorewall-names(5)[11] -
Describes naming of objects within a Shorewall configuration.
shorewall-addresses(5)[12] -
Describes how to specify addresses within a Shorewall
configuration.
shorewall-exclusion(5)[13] -
Describes how to exclude certain hosts and/or networks from matching a
rule.
shorewall-nesting(5)[14]
- Describes how to nest one Shorewall zone inside another.
NOTES
1. shorewall.conf
https://shorewall.org/manpages//manpages/shorewall.conf.html
2. shorewall-interfaces
https://shorewall.org/manpages//manpages/shorewall-interfaces.html
3. shorewall-zones
https://shorewall.org/manpages//manpages/shorewall-zones.html
4. shorewall-routes
https://shorewall.org/manpages//manpages/shorewall-routes.html
5. logging backend
https://shorewall.org/manpages//shorewall_logging.html#Backends
6. shorewall.conf
https://shorewall.org/manpages/shorewall.conf.html
7. shorewall-accounting
https://shorewall.org/manpages//manpages/shorewall-accounting.html
8. shorewall-stoppedrules
https://shorewall.org/manpages//manpages/shorewall-stoppedrules.html
9. https://shorewall.org/starting_and_stopping_shorewall.htm
https://shorewall.org/manpages//starting_and_stopping_shorewall.htm
10. shorewall-files(5)
https://shorewall.org/manpages/shorewall-files.html
11. shorewall-names(5)
https://shorewall.org/manpages/shorewall-names.html
12. shorewall-addresses(5)
https://shorewall.org/manpages/shorewall-addresses.html
13. shorewall-exclusion(5)
https://shorewall.org/manpages/shorewall-exclusion.html
14. shorewall-nesting(5)
https://shorewall.org/manpages/shorewall-nesting.html