Provided by: libalgorithm-combinatorics-perl_0.27-3build4_amd64 bug

NAME

       Algorithm::Combinatorics - Efficient generation of combinatorial sequences

SYNOPSIS

        use Algorithm::Combinatorics qw(permutations);

        my @data = qw(a b c);

        # scalar context gives an iterator
        my $iter = permutations(\@data);
        while (my $p = $iter->next) {
            # ...
        }

        # list context slurps
        my @all_permutations = permutations(\@data);

VERSION

       This documentation refers to Algorithm::Combinatorics version 0.26.

DESCRIPTION

       Algorithm::Combinatorics is an efficient generator of combinatorial sequences. Algorithms
       are selected from the literature (work in progress, see "REFERENCES"). Iterators do not
       use recursion, nor stacks, and are written in C.

       Tuples are generated in lexicographic order, except in subsets().

SUBROUTINES

       Algorithm::Combinatorics provides these subroutines:

           permutations(\@data)
           circular_permutations(\@data)
           derangements(\@data)
           complete_permutations(\@data)
           variations(\@data, $k)
           variations_with_repetition(\@data, $k)
           tuples(\@data, $k)
           tuples_with_repetition(\@data, $k)
           combinations(\@data, $k)
           combinations_with_repetition(\@data, $k)
           partitions(\@data[, $k])
           subsets(\@data[, $k])

       All of them are context-sensitive:

       •   In scalar context subroutines return an iterator that responds to the next() method.
           Using this object you can iterate over the sequence of tuples one by one this way:

               my $iter = combinations(\@data, $k);
               while (my $c = $iter->next) {
                   # ...
               }

           The next() method returns an arrayref to the next tuple, if any, or "undef" if the
           sequence is exhausted.

           Memory usage is minimal, no recursion and no stacks are involved.

       •   In list context subroutines slurp the entire set of tuples. This behaviour is offered
           for convenience, but take into account that the resulting array may be really huge:

               my @all_combinations = combinations(\@data, $k);

   permutations(\@data)
       The permutations of @data are all its reorderings. For example, the permutations of "@data
       = (1, 2, 3)" are:

           (1, 2, 3)
           (1, 3, 2)
           (2, 1, 3)
           (2, 3, 1)
           (3, 1, 2)
           (3, 2, 1)

       The number of permutations of "n" elements is:

           n! = 1,                  if n = 0
           n! = n*(n-1)*...*1,      if n > 0

       See some values at <http://www.research.att.com/~njas/sequences/A000142>.

   circular_permutations(\@data)
       The circular permutations of @data are its arrangements around a circle, where only
       relative order of elements matter, rather than their actual position. Think possible
       arrangements of people around a circular table for dinner according to whom they have to
       their right and left, no matter the actual chair they sit on.

       For example the circular permutations of "@data = (1, 2, 3, 4)" are:

           (1, 2, 3, 4)
           (1, 2, 4, 3)
           (1, 3, 2, 4)
           (1, 3, 4, 2)
           (1, 4, 2, 3)
           (1, 4, 3, 2)

       The number of circular permutations of "n" elements is:

               n! = 1,                      if 0 <= n <= 1
           (n-1)! = (n-1)*(n-2)*...*1,      if n > 1

       See a few numbers in a comment of <http://www.research.att.com/~njas/sequences/A000142>.

   derangements(\@data)
       The derangements of @data are those reorderings that have no element in its original
       place. In jargon those are the permutations of @data with no fixed points. For example,
       the derangements of "@data = (1, 2, 3)" are:

           (2, 3, 1)
           (3, 1, 2)

       The number of derangements of "n" elements is:

           d(n) = 1,                       if n = 0
           d(n) = n*d(n-1) + (-1)**n,      if n > 0

       See some values at <http://www.research.att.com/~njas/sequences/A000166>.

   complete_permutations(\@data)
       This is an alias for "derangements", documented above.

   variations(\@data, $k)
       The variations of length $k of @data are all the tuples of length $k consisting of
       elements of @data. For example, for "@data = (1, 2, 3)" and "$k = 2":

           (1, 2)
           (1, 3)
           (2, 1)
           (2, 3)
           (3, 1)
           (3, 2)

       For this to make sense, $k has to be less than or equal to the length of @data.

       Note that

           permutations(\@data);

       is equivalent to

           variations(\@data, scalar @data);

       The number of variations of "n" elements taken in groups of "k" is:

           v(n, k) = 1,                        if k = 0
           v(n, k) = n*(n-1)*...*(n-k+1),      if 0 < k <= n

   variations_with_repetition(\@data, $k)
       The variations with repetition of length $k of @data are all the tuples of length $k
       consisting of elements of @data, including repetitions. For example, for "@data = (1, 2,
       3)" and "$k = 2":

           (1, 1)
           (1, 2)
           (1, 3)
           (2, 1)
           (2, 2)
           (2, 3)
           (3, 1)
           (3, 2)
           (3, 3)

       Note that $k can be greater than the length of @data. For example, for "@data = (1, 2)"
       and "$k = 3":

           (1, 1, 1)
           (1, 1, 2)
           (1, 2, 1)
           (1, 2, 2)
           (2, 1, 1)
           (2, 1, 2)
           (2, 2, 1)
           (2, 2, 2)

       The number of variations with repetition of "n" elements taken in groups of "k >= 0" is:

           vr(n, k) = n**k

   tuples(\@data, $k)
       This is an alias for "variations", documented above.

   tuples_with_repetition(\@data, $k)
       This is an alias for "variations_with_repetition", documented above.

   combinations(\@data, $k)
       The combinations of length $k of @data are all the sets of size $k consisting of elements
       of @data. For example, for "@data = (1, 2, 3, 4)" and "$k = 3":

           (1, 2, 3)
           (1, 2, 4)
           (1, 3, 4)
           (2, 3, 4)

       For this to make sense, $k has to be less than or equal to the length of @data.

       The number of combinations of "n" elements taken in groups of "0 <= k <= n" is:

           n choose k = n!/(k!*(n-k)!)

   combinations_with_repetition(\@data, $k);
       The combinations of length $k of an array @data are all the bags of size $k consisting of
       elements of @data, with repetitions. For example, for "@data = (1, 2, 3)" and "$k = 2":

           (1, 1)
           (1, 2)
           (1, 3)
           (2, 2)
           (2, 3)
           (3, 3)

       Note that $k can be greater than the length of @data. For example, for "@data = (1, 2, 3)"
       and "$k = 4":

           (1, 1, 1, 1)
           (1, 1, 1, 2)
           (1, 1, 1, 3)
           (1, 1, 2, 2)
           (1, 1, 2, 3)
           (1, 1, 3, 3)
           (1, 2, 2, 2)
           (1, 2, 2, 3)
           (1, 2, 3, 3)
           (1, 3, 3, 3)
           (2, 2, 2, 2)
           (2, 2, 2, 3)
           (2, 2, 3, 3)
           (2, 3, 3, 3)
           (3, 3, 3, 3)

       The number of combinations with repetition of "n" elements taken in groups of "k >= 0" is:

           n+k-1 over k = (n+k-1)!/(k!*(n-1)!)

   partitions(\@data[, $k])
       A partition of @data is a division of @data in separate pieces. Technically that's a set
       of subsets of @data which are non-empty, disjoint, and whose union is @data. For example,
       the partitions of "@data = (1, 2, 3)" are:

           ((1, 2, 3))
           ((1, 2), (3))
           ((1, 3), (2))
           ((1), (2, 3))
           ((1), (2), (3))

       This subroutine returns in consequence tuples of tuples. The top-level tuple (an arrayref)
       represents the partition itself, whose elements are tuples (arrayrefs) in turn, each one
       representing a subset of @data.

       The number of partitions of a set of "n" elements are known as Bell numbers, and satisfy
       the recursion:

           B(0) = 1
           B(n+1) = (n over 0)B(0) + (n over 1)B(1) + ... + (n over n)B(n)

       See some values at <http://www.research.att.com/~njas/sequences/A000110>.

       If you pass the optional parameter $k, the subroutine generates only partitions of size
       $k. This uses an specific algorithm for partitions of known size, which is more efficient
       than generating all partitions and filtering them by size.

       Note that in that case the subsets themselves may have several sizes, it is the number of
       elements of the partition which is $k. For instance if @data has 5 elements there are
       partitions of size 2 that consist of a subset of size 2 and its complement of size 3; and
       partitions of size 2 that consist of a subset of size 1 and its complement of size 4. In
       both cases the partitions have the same size, they have two elements.

       The number of partitions of size "k" of a set of "n" elements are known as Stirling
       numbers of the second kind, and satisfy the recursion:

           S(0, 0) = 1
           S(n, 0) = 0 if n > 0
           S(n, 1) = S(n, n) = 1
           S(n, k) = S(n-1, k-1) + kS(n-1, k)

   subsets(\@data[, $k])
       This subroutine iterates over the subsets of data, which is assumed to represent a set. If
       you pass the optional parameter $k the iteration runs over subsets of data of size $k.

       The number of subsets of a set of "n" elements is

         2**n

       See some values at <http://www.research.att.com/~njas/sequences/A000079>.

CORNER CASES

       Since version 0.05 subroutines are more forgiving for unsual values of $k:

       •   If $k is less than zero no tuple exists. Thus, the very first call to the iterator's
           next() method returns "undef", and a call in list context returns the empty list. (See
           "DIAGNOSTICS".)

       •   If $k is zero we have one tuple, the empty tuple. This is a different case than the
           former: when $k is negative there are no tuples at all, when $k is zero there is one
           tuple. The rationale for this behaviour is the same rationale for n choose 0 = 1: the
           empty tuple is a subset of @data with "$k = 0" elements, so it complies with the
           definition.

       •   If $k is greater than the size of @data, and we are calling a subroutine that does not
           generate tuples with repetitions, no tuple exists. Thus, the very first call to the
           iterator's next() method returns "undef", and a call in list context returns the empty
           list. (See "DIAGNOSTICS".)

       In addition, since 0.05 empty @datas are supported as well.

EXPORT

       Algorithm::Combinatorics exports nothing by default. Each of the subroutines can be
       exported on demand, as in

           use Algorithm::Combinatorics qw(combinations);

       and the tag "all" exports them all:

           use Algorithm::Combinatorics qw(:all);

DIAGNOSTICS

   Warnings
       The following warnings may be issued:

       Useless use of %s in void context
           A subroutine was called in void context.

       Parameter k is negative
           A subroutine was called with a negative k.

       Parameter k is greater than the size of data
           A subroutine that does not generate tuples with repetitions was called with a k
           greater than the size of data.

   Errors
       The following errors may be thrown:

       Missing parameter data
           A subroutine was called with no parameters.

       Missing parameter k
           A subroutine that requires a second parameter k was called without one.

       Parameter data is not an arrayref
           The first parameter is not an arrayref (tested with "reftype()" from Scalar::Util.)

DEPENDENCIES

       Algorithm::Combinatorics is known to run under perl 5.6.2. The distribution uses
       Test::More and FindBin for testing, Scalar::Util for reftype(), and XSLoader for XS.

BUGS

       Please report any bugs or feature requests to "bug-algorithm-combinatorics@rt.cpan.org",
       or through the web interface at
       <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Algorithm-Combinatorics>.

SEE ALSO

       Math::Combinatorics is a pure Perl module that offers similar features.

       List::PowerSet offers a fast pure-Perl generator of power sets that
       Algorithm::Combinatorics copies and translates to XS.

BENCHMARKS

       There are some benchmarks in the benchmarks directory of the distribution.

REFERENCES

       [1] Donald E. Knuth, The Art of Computer Programming, Volume 4, Fascicle 2: Generating All
       Tuples and Permutations. Addison Wesley Professional, 2005. ISBN 0201853930.

       [2] Donald E. Knuth, The Art of Computer Programming, Volume 4, Fascicle 3: Generating All
       Combinations and Partitions. Addison Wesley Professional, 2005. ISBN 0201853949.

       [3] Michael Orlov, Efficient Generation of Set Partitions,
       <http://www.informatik.uni-ulm.de/ni/Lehre/WS03/DMM/Software/partitions.pdf>.

AUTHOR

       Xavier Noria (FXN), <fxn@cpan.org>

COPYRIGHT & LICENSE

       Copyright 2005-2012 Xavier Noria, all rights reserved.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.