Provided by: libbarcode-code128-perl_2.21-3_all 
NAME
Barcode::Code128 - Generate CODE 128 bar codes
SYNOPSIS
use Barcode::Code128;
$code = new Barcode::Code128;
REQUIRES
Perl 5.004, Carp, Exporter, GD (optional)
EXPORTS
By default, nothing. However there are a number of constants that represent special characters used in
the CODE 128 symbology that you may wish to include. For example if you are using the EAN-128 or UCC-128
code, the string to encode begins with the FNC1 character. To encode the EAN-128 string "00 0 0012345
555555555 8", you would do the following:
use Barcode::Code128 'FNC1';
$code = new Barcode::Code128;
$code->text(FNC1.'00000123455555555558');
To have this module export one or more of these characters, specify them on the "use" statement or use
the special token ':all' instead to include all of them. Examples:
use Barcode::Code128 qw(FNC1 FNC2 FNC3 FNC4 Shift);
use Barcode::Code128 qw(:all);
Here is the complete list of the exportable characters. They are assigned to high-order ASCII characters
purely arbitrarily for the purposes of this module; the values used do not reflect any part of the CODE
128 standard. Warning: Using the "CodeA", "CodeB", "CodeC", "StartA", "StartB", "StartC", and "Stop"
codes may cause your barcodes to be invalid, and be rejected by scanners. They are inserted
automatically as needed by this module.
CodeA 0xf4 CodeB 0xf5 CodeC 0xf6
FNC1 0xf7 FNC2 0xf8 FNC3 0xf9
FNC4 0xfa Shift 0xfb StartA 0xfc
StartB 0xfd StartC 0xfe Stop 0xff
DESCRIPTION
Barcode::Code128 generates bar codes using the CODE 128 symbology. It can generate images in PNG or GIF
format using the GD package, or it can generate a text string representing the barcode that you can
render using some other technology if desired.
The intended use of this module is to create a web page with a bar code on it, which can then be printed
out and faxed or mailed to someone who will scan the bar code. The application which spurred its
creation was an expense report tool, where the employee submitting the report would print out the web
page and staple the receipts to it, and the Accounts Payable clerk would scan the bar code to indicate
that the receipts were received.
The default settings for this module produce a large image that can safely be FAXed several times and
still scanned easily. If this requirement is not important you can generate smaller image using optional
parameters, described below.
If you wish to generate images with this module you must also have the GD module (written by Lincoln
Stein, and available from CPAN) installed. Using the libgd library, GD can generate files in PNG
(Portable Network Graphics) or GIF (Graphic Interchange Format) formats.
Starting with version 1.20, and ending with 2.0.28 (released July 21st, 2004), GD and the underlying
libgd library could not generate GIF files due to patent issues, but any modern version of libgd (since
2004) can do GIF as the patent has expired. Most browsers have no trouble with PNG files.
In order to ensure you have a sufficiently modern installation of the GD module to do both GIF and PNG
formats, we require version 2.18 of GD (which in turn requires libgd 2.0.28) or higher.
If the GD module is not present, you can still use the module, but you will not be able to use its
functions for generating images. You can use the barcode() method to get a string of "#" and " " (hash
and space) characters, and use your own image-generating routine with that as input.
To use the the GD module, you will need to install it along with this module. You can obtain it from the
CPAN (Comprehensive Perl Archive Network) repository of your choice under the directory "authors/id/LDS".
Visit http://www.cpan.org/ for more information about CPAN. The GD home page is:
http://stein.cshl.org/WWW/software/GD/GD.html
METHODS
new Usage:
$object = new Barcode::Code128
Creates a new barcode object.
option
Sets or retreives various options. If called with only one parameter, retrieves the value for that
parameter. If called with more than one parameter, treats the parameters as name/value pairs and
sets those option values accordingly. If called with no parameters, returns a hash consisting of the
values of all the options (hash ref in scalar context). When an option has not been set, its default
value is returned.
You can also set or retrieve any of these options by using it as a method name. For example, to set
the value of the padding option, you can use either of these:
$barcode->padding(10);
$barcode->option("padding", 10);
The valid options, and the default value and meaning of each, are:
width undef Width of the image (*)
height undef Height of the image (*)
border 2 Size of the black border around the barcode
scale 2 How many pixels for the smallest barcode stripe
font "large" Font (**) for the text at the bottom
show_text 1 True/False: display the text at the bottom?
font_margin 2 Pixels above, below, and to left of the text
font_align "left" Align the text ("left", "right", or "center")
transparent_text 1/0(***) True/False: use transparent background for text?
top_margin 0 No. of pixels above the barcode
bottom_margin 0 No. of pixels below the barcode (& text)
left_margin 0 No. of pixels to the left of the barcode
right_margin 0 No. of pixels to the right of the barcode
padding 20 Size of whitespace before & after barcode
* Width and height are the default values for the $x and $y arguments to the png, gif, or gd_image
method (q.v.)
** Font may be one of the following: "giant", "large", "medium", "small", or "tiny". Or, it may be
any valid GD font name, such as "gdMediumFont".
*** The "transparent_text" option is "1" (true) by default for GIF output, but "0" (false) for PNG.
This is because PNG transparency is not supported well by many viewing software The background color
is grey (#CCCCCC) when not transparent.
gif
png
gd_image
Usage:
$object->png($text)
$object->png($text, $x, $y)
$object->png($text, { options... })
$object->gif($text)
$object->gif($text, $x, $y)
$object->gif($text, { options... })
$object->gd_image($text)
$object->gd_image($text, $x, $y)
$object->gd_image($text, { options... })
These methods generate an image using the GD module. The gd_image() method returns a GD object,
which is useful if you want to do additional processing to it using the GD object methods. The other
two create actual images. NOTE: GIF files require an old version of GD, and so you probably are not
able to create them - see below.
The gif() and png() methods are wrappers around gd_image() that create the GD object and then run the
corresponding GD method to create output that can be displayed or saved to a file. Note that only
one of these two methods will work, depending on which version of GD you have - see below. The
return value from gif() or png() is a binary file, so if you are working on an operating system (e.g.
Microsoft Windows) that makes a distinction between text and binary files be sure to call
binmode(FILEHANDLE) before writing the image to it, or the file may get corrupted. Example:
open(PNG, ">code128.png") or die "Can't write code128.png: $!\n";
binmode(PNG);
print PNG $object->png("CODE 128");
close(PNG);
If you have GD version 1.20 or newer, the PNG file format is the only allowed option. Conversely if
you have GD version prior to 1.20, then the GIF format is the only option. Check the
$object->image_format() method to find out which you have (q.v.).
Note: All of the arguments to this function are optional. If you have previously specified $text to
the "barcode()", "encode()", or "text()" methods, you do not need to specify it again. The $x and $y
variables specify the size of the barcode within the image in pixels. If size(s) are not specified,
they will be set to the minimum size, which is the length of the barcode plus 40 pixels horizontally,
and 15% of the length of the barcode vertically. See also the $object->width() and $object->height()
methods for another way of specifying this.
If instead of specifying $x and $y, you pass a reference to a hash of name/value pairs, these will be
used as the options, overriding anything set using the $object->option() (or width/height) method
(q.v.). However, this will not set the options so any future barcodes using the same object will
revert to the option list of the object. If you want to set the options permanently use the option,
width, and/or height methods instead.
barcode
Usage:
$object->barcode($text)
Computes the bar code for the specified text. The result will be a string of '#' and space
characters representing the dark and light bands of the bar code. You can use this if you have an
alternate printing system besides using GD to create the images.
Note: The $text parameter is optional. If you have previously specified $text to the "encode()" or
"text()" methods, you do not need to specify it again.
Housekeeping Functions
The rest of the methods defined here are only for internal use, or if you really know what you are doing.
Some of them may be useful to authors of classes that inherit from this one, or may be overridden by
subclasses. If you just want to use this module to generate bar codes, you can stop reading here.
encode
Usage:
$object->encode
$object->encode($text)
$object->encode($text, $preferred_code)
Do the encoding. If $text is supplied, will automatically call the text() method to set that as the
text value first. If $preferred_code is supplied, will try that code first. Otherwise, the codes
will be tried in the following manner:
1. If it is possible to use Code C for any of the text, use that for as much of it as possible.
2. Check how many characters would be converted using codes A or B, and use that code to convert
them. If the amount is equal, code A is used.
3. Repeat steps 1 and 2 until the text string has been completely encoded.
text
Usage:
$object->text($text)
$text = $object->text
Set or retrieve the text for this barcode. This will be called automatically by encode() or
barcode() so typically this will not be used directly by the user.
start
Usage:
$object->start($code)
If the code (see code()) is already defined, then adds the CodeA, CodeB, or CodeC character as
appropriate to the encoded message inside the object. Typically for internal use only.
stop
Usage:
$object->stop()
Computes the check character and appends it along with the Stop character, to the encoded string.
Typically for internal use only.
code
Usage:
$object->code($code)
$code = $object->code
Set or retrieve the code for this barcode. $code may be 'A', 'B', or 'C'. Typically for internal
use only. Not particularly meaningful unless called during the middle of encoding.
CLASS VARIABLES
None.
DIAGNOSTICS
Unrecognized option ($opt) for $class
The specified option is not valid for the module. $class should be "Barcode::Code128" but if it has
been inherited into another module, that module will show instead. $opt is the attempted option.
The gd_image() method of Barcode::Code128 requires the GD module
To call the "gd_image()", "png()", or "gif()" methods, the GD module must be present. This module is
used to create the actual image. Without it, you can only use the "barcode()" method.
Scale must be a positive integer
The scale factor for the "gd_image()", "png()", or "gif()" methods must be a positive integer.
Border ($border) must be a positive integer or zero
The border option cannot be a fractional or negative number.
Invalid font $font
The specified font is not valid. Note that this is tested using GD->can(), and so any subroutine in
GD.pm will pass this test - but only the fonts will actually work. See the GD module documentation
for more.
Image width $x is too small for bar code
You have specified an image width that does not allow enough space for the bar code to be displayed.
The minimum allowable is the size of the bar code itself plus 40 pixels. If in doubt, just omit the
width value when calling "gd_image()", "png()", or "gif()" and it will use the minimum.
Image height $y is too small for bar code
You have specified an image height that does not allow enough space for the bar code to be displayed.
The minimum allowable is 15% of the width of the bar code. If in doubt, just omit the height value
when calling "gd_image()", "png()", or "gif()" and it will use the minimum.
Unable to create $x x $y image
An error occurred when initializing a GD::Image object for the specified size. Perhaps $x and $y are
too large for memory?
The gif() method of Barcode::Code128 requires the GD module
The gif() method of Barcode::Code128 requires version less than 1.20 of GD
The png() method of Barcode::Code128 requires the GD module
The png() method of Barcode::Code128 requires at least version 1.20 of GD
These errors indicate that the GD module, or the correct version of the GD module for this method,
was not present. You need to install GD version 1.20 or greater to create PNG files, or a version of
GD less than 1.20 to create GIF files.
No encoded text found
This message from "barcode()" typically means that there was no text message supplied either during
the current method call or in a previous method call on the same object. This error occurs when you
are trying to create a barcode by calling one of "gd_image()", "png()", "gif()", or "barcode()"
without having specified the text to be encoded.
No text defined
This message from "encode()" typically means that there was no text message supplied either during
the current method call or in a previous method call on the same object.
Invalid preferred code ``$preferred_code''
This error means "encode()" was called with the $preferred_code optional parameter but it was not one
of ``A'', ``B'', or ``C''.
Sanity Check Overflow
This is a serious error in "encode()" that indicates a serious problem attempting to encode the
requested message. This means that an infinite loop was generated. If you get this error please
contact the author.
Unable to find encoding for ``$text''
Part or all of the message could not be encoded. This may mean that the message contained characters
not encodable in the CODE 128 character set, such as a character with an ASCII value higher than 127
(except the special control characters defined in this module).
Unable to switch from ``$old_code'' to ``$new_code''
This is a serious error in "start()" that indicates a serious problem occurred when switching between
the codes (A, B, or C) of CODE 128. If you get this error please contact the author.
Unable to start with ``$new_code''
This is a serious error in "start()" that indicates a serious problem occurred when starting encoding
in one of the codes (A, B, or C) of CODE 128. If you get this error please contact the author.
Unknown code ``$new_code'' (should be A, B, or C)
This is a serious error in "code()" that indicates an invalid argument was supplied. Only the codes
(A, B, or C) of CODE 128 may be supplied here. If you get this error please contact the author.
BUGS
At least some Web browsers do not seem to handle PNG files with transparent backgrounds correctly. As a
result, the default for PNG is to generate barcodes without transparent backgrounds - the background is
grey instead.
AUTHOR
William R. Ward, wrw@bayview.com
SEE ALSO
perl(1), GD