Ubuntu Manpage: Perl::Critic::Policy::ValuesAndExpressions::ProhibitUnknownBackslash

Provided by: libperl-critic-pulp-perl_99-1_all

NAME

       Perl::Critic::Policy::ValuesAndExpressions::ProhibitUnknownBackslash - don't use undefined
       backslash forms

DESCRIPTION

       This policy is part of the "Perl::Critic::Pulp" add-on.  It checks for unknown backslash
       escapes like

           print "\*.c";      # bad

       This is harmless, assuming the intention is a literal "*" (which it gives), but
       unnecessary, and on that basis this policy is under the "cosmetic" theme (see "POLICY
       THEMES" in Perl::Critic).  Sometimes it can be a misunderstanding or a typo though, for
       instance a backslashed newline is a newline, but perhaps you thought it meant a
       continuation.

           print "this\       # bad
           is a newline";

       Perl already warns about unknown escaped alphanumerics like "\v" under "perl -w" or "use
       warnings" (see "Unrecognized escape \%c passed through" in perldiag).

           print "\v";        # bad, and provokes Perl warning

       This policy extends to report on any unknown escape, with options below to vary the
       strictness and to check single-quote strings too if desired.

   Control Characters \c
       Control characters "\cX" are checked and only the conventional A-Z a-z @ [ \ ] ^ _ ? are
       considered known.

           print "\c*";       # bad

       Perl accepts any "\c" and does an upcase xor 0x40, so "\c*" is letter "j", at least on an
       ASCII system.  But that's obscure and likely to be a typo or error.

       For reference, "\c\" is the ASCII FS "file separator" and the second backslash is not an
       escape, except for a closing quote character, which it does escape (basically because Perl
       scans for a closing quote before considering interpolations).  Thus,

           print " \c\  ";     # ok, control-\ FS
           print " \c\" ";     # bad, control-" is unknown
           print qq[ \c\]  ];  # ok, control-] GS

   Ending Interpolation
       A backslashed colon, bracket, brace or dash is allowed after an interpolated variable or
       element, since this stops interpolation at that point.

           print "$foo\::bar";    # ok, $foo
           print "@foo\::";       # ok, @foo

           print "$foo[0]\[1]";   # ok, is $foo[0]
           print "$esc\[1m";      # ok

           print "$foo\{k}";      # ok
           print "$foo\{k}";      # ok
           print "$foo{k}\[0]";   # ok, is $foo{k}
           print "@foo\{1,2}";    # ok, is @foo

           print "$foo\->[0]";    # ok, is $foo
           print "$foo\->{zz}";   # ok

       A single backslash like "\::" is enough for the colon case, but backslashing the second
       too as "\:\:" is quite common and is allowed.

           print "$#foo\:\:bar";  # ok

       Only an array or hash "->[]" or "->{}" need "\-" to stop interpolation.  Other cases such
       as an apparent method call or arrowed coderef call don't interpolate and the backslash is
       treated as unknown since unnecessary.

           print "$coderef\->(123)";        # bad, unnecessary
           print "Usage: $class\->foo()";   # bad, unnecessary

       For reference, the alternative in all the above is to write "{}" braces around the
       variable or element to delimit from anything following.  Doing so may be clearer than
       backslashing,

           print "${foo}::bar";    # alternatives
           print "@{foo}::bar";
           print "$#{foo}th";
           print "${foo[0]}[1]";   # array element $foo[0]

       The full horror story of backslashing interpolations can be found in "Gory details of
       parsing quoted constructs" in perlop.

   Octal Wide Chars
       Octal escapes "\400" to "\777" for wide chars 256 to 511 are new in Perl 5.6.  They're
       considered unknown in 5.005 and earlier (where they end up chopped to 8-bits 0 to 255).
       Currently if there's no "use" etc Perl version then it's presumed a high octal is
       intentional and is allowed.

           print "\400";    # ok

           use 5.006;
           print "\777";    # ok

           use 5.005;
           print "\777";    # bad in 5.005 and earlier

   Named Chars
       Named chars "\N{SOME THING}" are added by charnames, new in Perl 5.6.  In Perl 5.16 up,
       that module is automatically loaded when "\N" is used.  "\N" is considered known when "use
       5.016" or higher,

           use 5.016;
           print "\N{EQUALS SIGN}";   # ok with 5.16 automatic charnames

       or if "use charnames" is in the lexical scope,

           { use charnames ':full';
             print "\N{APOSTROPHE}";  # ok
           }
           print "\N{COLON}";         # bad, no charnames in lexical scope

       In Perl 5.6 through 5.14, a "\N" without "charnames" is a compile error so would be seen
       in those versions immediately anyway.  There's no check of the character name appearing in
       the "\N".  "charnames" gives an error for unknown names.

       The "charnames" option ("CONFIGURATION" below) can be allow to always allow named
       characters.  This can be used for instance if you always have Perl 5.16 up but without
       declaring that in a "use" statement.

       The "charnames" option can be disallow to always disallow named characters.  This is a
       blanket prohibition rather than an UnknownBackslash as such, but matches the allow option.
       Disallowing can be matter of personal preference or perhaps aim to save a little memory or
       startup time.

   Other Notes
       In the violation messages, a non-ascii or non-graphical escaped char is shown as hex like
       "\{0x263A}", to ensure the message is printable and unambiguous.

       Interpolated $foo or "@{expr}" variables and expressions are parsed like Perl does, so
       backslashes for refs within are ok, in particular tricks like "${\scalar ...}" are fine
       (see "How do I expand function calls in a string?" in perlfaq4).

           print "this ${\(some()+thing())}";   # ok

   Disabling
       As always, if you're not interested in any of this then you can disable
       "ProhibitUnknownBackslash" from your .perlcriticrc in the usual way (see "CONFIGURATION"
       in Perl::Critic),

           [-ValuesAndExpressions::ProhibitUnknownBackslash]

CONFIGURATION

"double" (string, default "all")
"heredoc" (string, default "all")
"double" applies to double-quote strings "", "qq{}", "qx{}", etc. "heredoc" applies
to interpolated here-documents "<<HERE" etc. The possible values are

none don't report anything
alnum report unknown alphanumerics, like Perl's warning
quotemeta report anything quotemeta() doesn't escape
all report all unknowns

"alnum" does no more than compiling with "perl -w", but might be good for checking
code you don't want to run.

"quotemeta" reports escapes not produced by "quotemeta()". For example "quotemeta"
escapes a "*", so "\*" is not reported, but it doesn't escape an underscore "_", so
"\_" is reported. The effect is to prohibit a few more escapes than "alnum". One use
is to check code generated by other code where you've used "quotemeta" to produce
double-quoted strings and thus may have escaping which is unnecessary but works fine.

"single" (string, default "none")
"single" applies to single-quote strings '', "q{}", "qx''", etc. The possible values
are as above, though only "all" or "none" make much sense.

none don't report anything
all report all unknowns

The default is "none" because literal backslashes in single-quotes are usually both
what you want and quite convenient. Setting "all" effectively means you must write
backslashes as "\\".

print 'c:\my\msdos\filename'; # bad under "single=all"
print 'c:\\my\\msdos\\filename'; # ok

Doubled backslashing like this is correct, and can emphasize that you really did want
a backslash, but it's tedious and not easy on the eye and so left only as an option.

For reference, single-quote here-documents "<<'HERE'" don't have any backslash escapes
and so are not considered by this policy. "qx{}" command backticks are double-quote
but "qx''" is single-quote. They are treated per the corresponding "single" or
"double" option.

"charnames" (string, default "version")
Whether to treat named characters "\N{}" in double-quote strings as known or unknown,

version known if use charnames or use 5.016
allow always allow
disallow always disallow

BUGS

       Interpolations in double-quote strings are found by some code here in
       "ProhibitUnknownBackslash" (re-parse the string content as Perl code starting from the "$"
       or "@").  If this fails for some reason then a warning is given and the rest of the string
       is unchecked.  In the future would like PPI to parse interpolations, for the benefit of
       string chopping like here or checking of code in an interpolation.

HOME PAGE

       http://user42.tuxfamily.org/perl-critic-pulp/index.html

COPYRIGHT