NAME

       SSL_read_ex, SSL_read, SSL_peek_ex, SSL_peek - read bytes from a TLS/SSL connection

SYNOPSIS

        #include <openssl/ssl.h>

        int SSL_read_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes);
        int SSL_read(SSL *ssl, void *buf, int num);

        int SSL_peek_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes);
        int SSL_peek(SSL *ssl, void *buf, int num);

DESCRIPTION

       SSL_read_ex() and SSL_read() try to read num bytes from the specified ssl into the buffer buf. On success
       SSL_read_ex() will store the number of bytes actually read in *readbytes.

       SSL_peek_ex() and SSL_peek() are identical to SSL_read_ex() and SSL_read() respectively except no bytes
       are actually removed from the underlying BIO during the read, so that a subsequent call to SSL_read_ex()
       or SSL_read() will yield at least the same bytes.

NOTES

       In the paragraphs below a "read function" is defined as one of SSL_read_ex(), SSL_read(), SSL_peek_ex()
       or SSL_peek().

       If necessary, a read function will negotiate a TLS/SSL session, if not already explicitly performed by
       SSL_connect(3) or SSL_accept(3). If the peer requests a re-negotiation, it will be performed
       transparently during the read function operation. The behaviour of the read functions depends on the
       underlying BIO.

       For the transparent negotiation to succeed, the ssl must have been initialized to client or server mode.
       This is being done by calling SSL_set_connect_state(3) or SSL_set_accept_state() before the first
       invocation of a read function.

       The read functions work based on the SSL/TLS records. The data are received in records (with a maximum
       record size of 16kB). Only when a record has been completely received, can it be processed (decryption
       and check of integrity).  Therefore, data that was not retrieved at the last read call can still be
       buffered inside the SSL layer and will be retrieved on the next read call. If num is higher than the
       number of bytes buffered then the read functions will return with the bytes buffered. If no more bytes
       are in the buffer, the read functions will trigger the processing of the next record.  Only when the
       record has been received and processed completely will the read functions return reporting success. At
       most the contents of one record will be returned. As the size of an SSL/TLS record may exceed the maximum
       packet size of the underlying transport (e.g. TCP), it may be necessary to read several packets from the
       transport layer before the record is complete and the read call can succeed.

       If SSL_MODE_AUTO_RETRY has been switched off and a non-application data record has been processed, the
       read function can return and set the error to SSL_ERROR_WANT_READ.  In this case there might still be
       unprocessed data available in the BIO.  If read ahead was set using SSL_CTX_set_read_ahead(3), there
       might also still be unprocessed data available in the SSL.  This behaviour can be controlled using the
       SSL_CTX_set_mode(3) call.

       If the underlying BIO is blocking, a read function will only return once the read operation has been
       finished or an error occurred, except when a non-application data record has been processed and
       SSL_MODE_AUTO_RETRY is not set.  Note that if SSL_MODE_AUTO_RETRY is set and only non-application data is
       available the call will hang.

       If the underlying BIO is nonblocking, a read function will also return when the underlying BIO could not
       satisfy the needs of the function to continue the operation.  In this case a call to SSL_get_error(3)
       with the return value of the read function will yield SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE.  As at
       any time it's possible that non-application data needs to be sent, a read function can also cause write
       operations.  The calling process then must repeat the call after taking appropriate action to satisfy the
       needs of the read function.  The action depends on the underlying BIO.  When using a nonblocking socket,
       nothing is to be done, but select() can be used to check for the required condition.  When using a
       buffering BIO, like a BIO pair, data must be written into or retrieved out of the BIO before being able
       to continue.

       SSL_pending(3) can be used to find out whether there are buffered bytes available for immediate
       retrieval.  In this case the read function can be called without blocking or actually receiving new data
       from the underlying socket.

RETURN VALUES

       SSL_read_ex() and SSL_peek_ex() will return 1 for success or 0 for failure.  Success means that 1 or more
       application data bytes have been read from the SSL connection.  Failure means that no bytes could be read
       from the SSL connection.  Failures can be retryable (e.g. we are waiting for more bytes to be delivered
       by the network) or non-retryable (e.g. a fatal network error).  In the event of a failure call
       SSL_get_error(3) to find out the reason which indicates whether the call is retryable or not.

       For SSL_read() and SSL_peek() the following return values can occur:

       > 0 The read operation was successful.  The return value is the number of bytes actually read from the
           TLS/SSL connection.

       <= 0
           The read operation was not successful, because either the connection was closed, an error occurred or
           action must be taken by the calling process.  Call SSL_get_error(3) with the return value ret to find
           out the reason.

           Old documentation indicated a difference between 0 and -1, and that -1 was retryable.  You should
           instead call SSL_get_error() to find out if it's retryable.

SEE ALSO

       SSL_get_error(3), SSL_write_ex(3), SSL_CTX_set_mode(3), SSL_CTX_new(3), SSL_connect(3), SSL_accept(3)
       SSL_set_connect_state(3), SSL_pending(3), SSL_shutdown(3), SSL_set_shutdown(3), ssl(7), bio(7)

HISTORY

       The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.

COPYRIGHT

       Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except in compliance
       with the License.  You can obtain a copy in the file LICENSE in the source distribution or at
       <https://www.openssl.org/source/license.html>.