Provided by: smokeping_2.8.2+ds-1_all 
NAME
Smokeping::probes::Radius - a RADIUS authentication probe for SmokePing
OVERVIEW
Measures RADIUS authentication latency for SmokePing
SYNOPSIS
*** Probes ***
+Radius
forks = 5
offset = 50%
passwordfile = /some/place/secret
secretfile = /another/place/secret
step = 300
# The following variables can be overridden in each target section
/^influx_.+/ = influx_location = In the basement
allowreject = true
mininterval = 1
nas_ip_address = 10.1.2.3
password = test-password
pings = 5
port = 1645
secret = test-secret
timeout = 5
username = test-user # mandatory
# [...]
*** Targets ***
probe = Radius # if this should be the default probe
# [...]
+ mytarget
# probe = Radius # if the default probe is something else
host = my.host
/^influx_.+/ = influx_location = In the basement
allowreject = true
mininterval = 1
nas_ip_address = 10.1.2.3
password = test-password
pings = 5
port = 1645
secret = test-secret
timeout = 5
username = test-user # mandatory
DESCRIPTION
This probe measures RADIUS (RFC 2865) authentication latency for SmokePing.
The username to be tested is specified in either the probe-specific or the target-specific variable
`username', with the target-specific one overriding the probe-specific one.
The password can be specified either (in order of precedence, with the latter overriding the former) in
the probe-specific variable `password', in an external file or in the target-specific variable
`password'. The location of this file is given in the probe-specific variable `passwordfile'. See
Smokeping::probes::passwordchecker(3pm) for the format of this file (summary: colon-separated triplets of
the form `<host>:<username>:<password>')
The RADIUS protocol requires a shared secret between the server and the client. This secret can be
specified either (in order of precedence, with the latter overriding the former) in the probe-specific
variable `secret', in an external file or in the target-specific variable `secret'. This external file
is located by the probe-specific variable `secretfile', and it should contain whitespace-separated pairs
of the form `<host> <secret>'. Comments and blank lines are OK.
If the optional probe-specific variable `nas_ip_address' is specified, its value is inserted into the
authentication requests as the `NAS-IP-Address' RADIUS attribute.
The probe tries to be nice to the server and does not send authentication requests more frequently than
once every X seconds, where X is the value of the target-specific "min_interval" variable (1 by default).
VARIABLES
Supported probe-specific variables:
forks
Run this many concurrent processes at maximum
Example value: 5
Default value: 5
offset
If you run many probes concurrently you may want to prevent them from hitting your network all at the
same time. Using the probe-specific offset parameter you can change the point in time when each probe
will be run. Offset is specified in % of total interval, or alternatively as 'random', and the offset
from the 'General' section is used if nothing is specified here. Note that this does NOT influence
the rrds itself, it is just a matter of when data acquisition is initiated. (This variable is only
applicable if the variable 'concurrentprobes' is set in the 'General' section.)
Example value: 50%
passwordfile
Location of the file containing usernames and passwords.
Example value: /some/place/secret
secretfile
A file containing the RADIUS shared secrets for the targets. It should contain whitespace-separated
pairs of the form `<host> <secret>'. Comments and blank lines are OK.
Example value: /another/place/secret
step
Duration of the base interval that this probe should use, if different from the one specified in the
'Database' section. Note that the step in the RRD files is fixed when they are originally generated,
and if you change the step parameter afterwards, you'll have to delete the old RRD files or somehow
convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the
'General' section.)
Example value: 300
Supported target-specific variables:
/^influx_.+/
This is a tag that will be sent to influxdb and has no impact on the probe measurement. The tag name
will be sent without the "influx_" prefix, which will be replaced with "tag_" instead. Tags can be
used for filtering.
Example value: influx_location = In the basement
allowreject
Treat "reject" responses as OK
Example value: true
mininterval
The minimum interval between each authentication request sent, in (possibly fractional) seconds.
Default value: 1
nas_ip_address
The NAS-IP-Address RADIUS attribute for the authentication requests. Not needed everywhere.
Example value: 10.1.2.3
password
The password for the user, if not present in the password file.
Example value: test-password
pings
How many pings should be sent to each target, if different from the global value specified in the
Database section. Note that the number of pings in the RRD files is fixed when they are originally
generated, and if you change this parameter afterwards, you'll have to delete the old RRD files or
somehow convert them.
Example value: 5
port
The RADIUS port to be used
Example value: 1645
secret
The RADIUS shared secret for the target, if not present in the secrets file.
Example value: test-secret
timeout
Timeout in seconds for the RADIUS queries.
Default value: 5
username
The username to be tested.
Example value: test-user
This setting is mandatory.
AUTHORS
Niko Tyni <ntyni@iki.fi>
BUGS
There should be a more general way of specifying RADIUS attributes.
2.8.2 2024-02-04 Smokeping_probes_Radius(3)