Provided by: libxml-libxml-iterator-perl_1.06-1_all 
NAME
XML::LibXML::Iterator - XML::LibXML's Tree Iteration Class
VERSION
version 1.06
SYNOPSIS
use XML::LibXML;
use XML::LibXML::Iterator;
my $doc = XML::LibXML->new->parse_string( $somedata );
my $iter= XML::LibXML::Iterator->new( $doc );
$iter->iterator_function( \&iterator_function );
# more control on the flow
while ( $iter->nextNode ) {
# do something
}
# operate on the entire tree
$iter->iterate( \&callback_function );
DESCRIPTION
XML::LibXML::Iterator is an iterator class for XML::LibXML parsed documents. This class
allows one to iterate the document tree as it were a linear data structure. It is possible
to step back and forth between the nodes of the tree and do certain operations on that
nodes. Different to XPath the nodes are not prefetched but will be calculated for each
step. Therefore an iterator is sensible towards the current state of a document tree on
each step, while XPath is only per query executed.
What is an iterator?
XML::LibXML offers by default a W3C DOM interface on the parsed XML documents. This tree
has per definition four directions to be traversed: Up, down, foreward and backward.
Therefore a tree can be considered two dimensional. Although a tree is still one more
simple datastructure it is way to complex for some operations. So the
XML::LibXML::Iterator class breaks the for operations down to only two: backward and
forward. For some people this easier to understand than DOM or SAX as this follows more
the way one actually reads an XML document.
Therefore an iterator has three basic functions:
• nextNode()
• current()
• previousNode()
That's it. With an iterator one does not have to decide when to dive into a subtree or
find a parent. It is not even required to care about the boundaries of a certain level.
The iterator will get the next node for you until there is no node left to handle.
In short: An iterator will answer the question about what to do next.
How to use XML::LibXML::Iterator?
XML::LibXML::Iterator requires a parsed document or at least a node to operate on. This
node is passed to the iterator class and will be used as the first node of the iteration.
One can always reset the iterator to the first node by using the first()-function.
Once XML::LibXML::Iterator is initialized the tree can be traversed by using either next()
or previous(). Both function will return a XML::LibXML::Node object if there is such
object available.
Since the current object hold by the iterator class is always available via the current()
function.
The following example may clarify this:
# get the document from wherever you like
my $doc = XML::LibXML->new->parse_stream( *SOMEINPUT );
# get the iterator for the document root.
my $iter = XML::LibXML::Iterator->new( $doc->documentElement );
# walk through the document
while ( $iter->nextNode() ) {
my $curnode = $iter->current();
print $curnode->nodeType();
}
# now get back to the beginning
$iter->first();
my $curnode = $iter->current();
print $curnode->nodeType();
Actually the functions nextNode(), previousNode(), first(), last() and current() do return
the node which is current after the operation. E.g. nextNode() moves to the next node if
possible and then returns the node. Thus the while-loop in the example can be written as
while ( $iter->nextNode() ) {
print $_->nodeType();
}
Note, that just relieing on the return value of next() and previous() is somewhat
dangerous, because both functions return undef in case of reaching the iteration
boundaries. That means it is not possible to iterate past the last element or before the
first one.
Node Filters
XML::LibXML::Iterator accepts XML::NodeFilters to limit the nodes made available to the
caller. Any nodefilter applied to XML::LibXML::Iterator will test if a node returned by
the iteration function is visible to the caller.
Different to the DOM Traversal Specification, XML::LibXML::Iterator allows filter stacks.
This means it is possible to apply more than a single node filter to your node iterator.
Complex Iterations
By default XML::LibXML::Iterator will access all nodes of a given DOM tree. An interation
based on the default iterator will access each single node in the given subtree once. The
order how the nodes will be accessed is given by the following order:
node -> node's childnodes -> node's next sibling
In combination with XML::Nodefilter this is best for a wide range of scripts and
applications. Nevertheless this is still to restrictive for some applications.
XML::LibXML::Iterator allows one to change that behaviour. This is done by resetting
XML::LibXML::Iterator's iterator function. By using the method iterator_function() to
override the default iterator function, it is possible to implement iterations based on
any iteration rule imaginable.
A valid iterator function has to take two parameters: As the first parameter it will
receive the iterator object itself, as second the direction of the iteration will be
passed. The direction is either 1 (for next()) or -1 (for previous()). As the iterator-
function is called by next() and previous() the interator-function has to be aware about
the iteration boundaries. In case the iteration would pass the boundary for that
operation, the function has to return undefined. Also the iterator function has to return
the new current node, instead of setting it itself.
*DEVELOPER NOTE* In order a single stepping is rather limited, the direction is given by
the sign of the passed integer value. The value of the passed parameter will be used as an
indication how many steps should be done. Therefor the interation direction should be
tested relative to '0' and not as a equation. A basic template for a iterator function
therefore will look like this:
sub iterator_func_templ {
my $iter = shift;
my $step = shift;
my $node = undef;
my $current = $iter->current();
if ( $step > 0 ) {
# move forward
}
else {
# move backward
$step *= -1; # remove the sign
}
return $node;
}
Repeated Operation
Another feature of XML::LibXML::Iterator is the ability to repeat a single operation on
all nodes in scope. Instead of writing a loop one can specify the operation as a function,
that it applied on each node found. The function that does the trick, is named iterate().
iterate() takes again two parameter: First the iterator object, second the node to operate
on. iterate() will iterate through the entire document starting with the first node. If
one has already started an iteration, the internal position will be reset to the first
node.
The following example will show how this works:
$iter->iterate( sub {my ($iter,$node)=@_; map {$iter->setNodeName( lc $iter->nodeName ) if $iter->nodeType != NAMESPACE_DECLARATION } ($node, $node->attributes); } );
This extra long line lowercases all tagnames and the names of the attributes in a given
subtree.
METHODS
• new($first_node)
• default_iterator
• first()
• next()
• nextNode()
• previous()
• previousNode()
• last()
• current()
• index()
• iterator_function($funcion_ref)
• set_filter(@filter_list)
• add_filter(@filter_list)
• iterate($function_ref)
SEE ALSO
XML::LibXML::Node, XML::NodeFilter
AUTHOR
Christian Glahn, <phish@cpan.org>
COPYRIGHT
(c) 2002-2007, Christian Glahn. All rights reserved.
This package is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
SUPPORT
Websites
The following websites have more information about this module, and may be of help to you.
As always, in addition to those websites please use your favorite search engine to
discover more resources.
• MetaCPAN
A modern, open-source CPAN search engine, useful to view POD in HTML format.
<https://metacpan.org/release/XML-LibXML-Iterator>
• RT: CPAN's Bug Tracker
The RT ( Request Tracker ) website is the default bug/issue tracking system for CPAN.
<https://rt.cpan.org/Public/Dist/Display.html?Name=XML-LibXML-Iterator>
• CPANTS
The CPANTS is a website that analyzes the Kwalitee ( code metrics ) of a distribution.
<http://cpants.cpanauthors.org/dist/XML-LibXML-Iterator>
• CPAN Testers
The CPAN Testers is a network of smoke testers who run automated tests on uploaded
CPAN distributions.
<http://www.cpantesters.org/distro/X/XML-LibXML-Iterator>
• CPAN Testers Matrix
The CPAN Testers Matrix is a website that provides a visual overview of the test
results for a distribution on various Perls/platforms.
<http://matrix.cpantesters.org/?dist=XML-LibXML-Iterator>
• CPAN Testers Dependencies
The CPAN Testers Dependencies is a website that shows a chart of the test results of
all dependencies for a distribution.
<http://deps.cpantesters.org/?module=XML::LibXML::Iterator>
Bugs / Feature Requests
Please report any bugs or feature requests by email to "bug-xml-libxml-iterator at
rt.cpan.org", or through the web interface at
<https://rt.cpan.org/Public/Bug/Report.html?Queue=XML-LibXML-Iterator>. You will be
automatically notified of any progress on the request by the system.
Source Code
The code is open to the world, and available for you to hack on. Please feel free to
browse it and play with it, or whatever. If you want to contribute patches, please send me
a diff or prod me to pull from your repository :)
<https://github.com/shlomif/xml-libxml-iterator>
git clone git://github.com/shlomif/xml-libxml-iterator.git
AUTHOR
unknown
BUGS
Please report any bugs or feature requests on the bugtracker website
<https://github.com/shlomif/xml-libxml-iterator/issues>
When submitting a bug or request, please include a test-file or a patch to an existing
test-file that illustrates the bug or desired feature.
COPYRIGHT AND LICENSE
This software is copyright (c) 2020 by unknown.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.