Provided by: pciutils_3.10.0-2build1_amd64 
NAME
pcilib - a library for accessing PCI devices
DESCRIPTION
The PCI library (also known as pcilib and libpci) is a portable library for accessing PCI devices and
their configuration space.
ACCESS METHODS
The library supports a variety of methods to access the configuration space on different operating
systems. By default, the first matching method in this list is used, but you can specify override the
decision (see the -A switch of lspci).
linux-sysfs
The /sys filesystem on Linux 2.6 and newer. The standard header of the config space is available
to all users, the rest only to root. Supports extended configuration space, PCI domains, VPD (from
Linux 2.6.26), physical slots (also since Linux 2.6.26) and information on attached kernel
drivers.
linux-proc
The /proc/bus/pci interface supported by Linux 2.1 and newer. The standard header of the config
space is available to all users, the rest only to root.
intel-conf1
Direct hardware access via Intel configuration mechanism 1. Available on i386 and compatibles on
Linux, Solaris/x86, GNU Hurd, Windows, BeOS and Haiku. Requires root privileges.
intel-conf2
Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles on
Linux, Solaris/x86, GNU Hurd, Windows, BeOS and Haiku. Requires root privileges. Warning: This
method is able to address only the first 16 devices on any bus and it seems to be very unreliable
in many cases.
mmio-conf1
Direct hardware access via Intel configuration mechanism 1 via memory-mapped I/O. Mostly used on
non-i386 platforms. Requires root privileges. Warning: This method needs to be properly configured
via the mmio-conf1.addrs parameter.
mmio-conf1-ext
Direct hardware access via Extended PCIe Intel configuration mechanism 1 via memory-mapped I/O.
Mostly used on non-i386 platforms. Requires root privileges. Warning: This method needs to be
properly configured via the mmio-conf1-ext.addrs parameter.
ecam Direct hardware access via PCIe ECAM (Enhanced Configuration Access Mechanism). Available on all
PCIe-compliant hardware. Requires root privileges and access to physical memory (on Linux systems
disabled CONFIG_STRICT_DEVMEM option). On ACPI compatible systems is ECAM mapping read from the
MCFG table specified by the ecam.acpimcfg parameter. On EFI compatible systems, ACPI MCFG table
can be located in physical memory via EFI system table specified by the ecam.efisystab parameter.
On FreeBSD/NetBSD systems, physical address of ACPI MCFG table can be located by kenv or sysctl
interface when the ecam.bsd parameter is not disabled. On x86 BIOS compatible systems, ACPI MCFG
table can be located in physical memory by scanning x86 BIOS memory when the ecam.x86bios
parameter is not disabled. Alternatively ECAM mappings can be specified by the ecam.addrs
parameter which takes precedence over ACPI MCFG table. This option is required on systems without
ACPI and also on systems without EFI or x86 BIOS.
fbsd-device
The /dev/pci device on FreeBSD. Requires root privileges.
aix-device
Access method used on AIX. Requires root privileges.
nbsd-libpci
The /dev/pci0 device on NetBSD accessed using the local libpci library.
obsd-device
The /dev/pci device on OpenBSD. Requires root privileges.
dump Read the contents of configuration registers from a file specified in the dump.name parameter. The
format corresponds to the output of lspci -x.
darwin Access method used on Mac OS X / Darwin. Must be run as root and the system must have been booted
with debug=0x144.
win32-cfgmgr32
Device listing on Windows systems using the Windows Configuration Manager via cfgmgr32.dll system
library. This method does not require any special Administrator rights or privileges.
Configuration Manager provides only basic information about devices, assigned resources and device
tree structure. There is no access to the PCI configuration space but libpci either tries to use
other access method to access configuration space or it provides read-only virtual emulation based
on information from Configuration Manager. Other access method can be chosen by the
win32.cfgmethod parameter. By default the first working one is selected (if any). Starting with
Windows 8 (NT 6.2) it is not possible to retrieve resources from 32-bit application or library on
64-bit system.
win32-sysdbg
Access to the PCI configuration space via NT SysDbg interface on Windows systems. Process needs to
have Debug privilege, which local Administrators have by default. Not available on 64-bit systems
and neither on recent 32-bit systems. Only devices from the first domain are accessible and only
first 256 bytes of the PCI configuration space is accessible via this method.
win32-kldbg
Access to the PCI configuration space via Kernel Local Debugging Driver kldbgdrv.sys. This driver
is not part of the Windows system but is part of the Microsoft WinDbg tool. It is required to have
kldbgdrv.sys driver installed in the system32 directory or to have windbg.exe or kd.exe binary in
PATH. kldbgdrv.sys driver has some restrictions. Process needs to have Debug privilege and
Windows system has to be booted with Debugging option. Debugging option can be enabled by calling
(takes effect after next boot): bcdedit /debug on
Download links for WinDbg 6.12.2.633 standalone installer from Microsoft Windows SDK for Windows 7
and .NET Framework 4:
amd64: https://download.microsoft.com/download/A/6/A/A6AC035D-DA3F-4F0C-
ADA4-37C8E5D34E3D/setup/WinSDKDebuggingTools_amd64/dbg_amd64.msi
ia64: https://download.microsoft.com/download/A/6/A/A6AC035D-DA3F-4F0C-
ADA4-37C8E5D34E3D/setup/WinSDKDebuggingTools_ia64/dbg_ia64.msi
x86: https://download.microsoft.com/download/A/6/A/A6AC035D-DA3F-4F0C-
ADA4-37C8E5D34E3D/setup/WinSDKDebuggingTools/dbg_x86.msi
Archived download links of previous WinDbg versions:
https://web.archive.org/web/20110221133326/https://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
https://web.archive.org/web/20110214012715/https://www.microsoft.com/whdc/devtools/debugging/install64bit.mspx
PARAMETERS
The library is controlled by several parameters. They should have sensible default values, but in case
you want to do something unusual (or even something weird), you can override them (see the -O switch of
lspci).
Parameters of specific access methods
dump.name
Name of the bus dump file to read from.
fbsd.path
Path to the FreeBSD PCI device.
nbsd.path
Path to the NetBSD PCI device.
obsd.path
Path to the OpenBSD PCI device.
proc.path
Path to the procfs bus tree.
sysfs.path
Path to the sysfs device tree.
devmem.path
Path to the /dev/mem device.
mmio-conf1.addrs
Physical addresses of memory-mapped I/O ports for Intel configuration mechanism 1. CF8 (address)
and CFC (data) I/O port addresses are separated by slash and multiple addresses for different PCI
domains are separated by commas. Format: 0xaddr1/0xdata1,0xaddr2/0xdata2,...
mmio-conf1-ext.addrs
Physical addresses of memory-mapped I/O ports for Extended PCIe Intel configuration mechanism 1.
It has same format as mmio-conf1.addrs parameter.
ecam.addrs
Physical addresses of PCIe ECAM mappings. Each mapping must contains first PCI bus number and
physical address where mapping starts. And then it may contain the length of the mapping, the last
PCI bus number and PCI domain number. When the last PCI bus number is not provided then it is
calculated from the length of the mapping or it is assumed 0xff. When length of the mapping is
provided then it is calculated from the last PCI bus number. And when PCI domain is not provided
then 0x0 is assumed. All numbers must be supplied in hexadecimal form (leading prefix 0x is not
required). Multiple mappings are separated by commas. Format:
[domain:]start_bus[-end_bus]:start_addr[+length],...
ecam.acpimcfg
Path to the ACPI MCFG table. Processed by the glob(3) function, so it may contain wildcards (*).
ecam.efisystab
Path to the EFI system table.
ecam.bsd
When not set to 0 then use BSD kenv or sysctl to find ACPI MCFG table. Default value is 1 on BSD
systems.
ecam.x86bios
When not set to 0 then scan x86 BIOS memory for ACPI MCFG table. Default value is 1 on x86
systems.
win32.cfgmethod
Config space access method to use with win32-cfgmgr32 on Windows systems. Value auto or an empty
string selects the first access method which supports access to the config space on Windows. Value
win32-cfgmgr32 or none only builds a read-only virtual emulated config space with information from
the Configuration Manager.
Parameters for resolving of ID's via DNS
net.domain
DNS domain containing the ID database.
net.cache_name
Name of the file used for caching of resolved ID's.
Parameters for resolving of ID's via UDEV's HWDB
hwdb.disable
Disable use of HWDB if set to a non-zero value.
SEE ALSO
lspci(8), setpci(8), pci.ids(5), update-pciids(8)
AUTHOR
The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
pciutils-3.10.0 01 May 2023 pcilib(7)