Provided by: opa-fastfabric_10.10.3.0.11-1ubuntu3_amd64 
NAME
opaextractperf
Provides a report of all performance counters in a CVS format suitable for importing into
a spreadsheet or parsed by other scripts for further analysis. It generates a detailed
opareport component summary report and pipes the result to opaxmlextract, extracting
element values for NodeDesc, SystemImageGUID, PortNum, and all the performance counters.
Extraction is performed only from the Systems portion of the report, which does not
contain Neighbor information (the Neighbor and SMs portions are suppressed).
Syntax
opaextractperf [opareport options]
Options
--help
Produces full help text.
opareport options
The following options are passed to opareport. This subset is considered typical
and useful for this command. By design, the tool ignores -o/--output report
option.
-h/--hfi hfi
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port
port is a system-wide port number. Default is 0.
-p/--port port
Specifies the port, numbered 1..n. Using 0 specifies the first active
port. Default is 0.
-X/--infile snapshot_input
Generates a report using the data in the snapshot_input file.
snapshot_input must have been generated during a previous -o snapshot
run. When used, the -s, -i, -C, and -a options are ignored. '-' may be
used as the snapshot_input to specify stdin.
-T/--topology topology_input
Uses topology_input file to augment and verify fabric information.
When used, various reports can be augmented with information not
available electronically (such as cable labels). '-' may be used to
specify stdin.
-i/--interval seconds
Obtains performance statistics over interval seconds. Clears all
statistics, waits interval seconds, then generates report. Implies -s
option.
-b / --begin date_time
Obtains past performance stats over an interval beginning at
date_time. Implies -s option. date_time may be a time entered as
HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date
followed by time; for example, "2016-07-04 14:40". Relative times are
taken as "x [second|minute|hour|day](s) ago.
-e / --end date_time
Obtains past performance stats over an interval ending at date_time.
Implies -s option.
date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY,
dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example,
"2016-07-04 14:40". Relative times are taken as "x
[second|minute|hour|day](s) ago.
-C/--clear
Clears performance statistics for all ports. Only statistics with
error thresholds are cleared. A clear occurs after generating the
report.
-a/--clearall
Clears all performance statistics for all ports.
-M/--pmadirect
Accesses performance statistics using direct PMA.
-A/--allports
Gets PortInfo for down switch ports. Uses direct SMA to get this data.
If used with -M, also gets PMA stats for down switch ports.
-F/--focus point
Specifies the focus area for report. Used for all reports except route
to limit scope of report. Refer to Point Syntax for details.
-h and -p options permit a variety of selections:
-h 0
First active port in system (Default).
-h 0 -p 0
First active port in system.
-h x
First active port on HFI x.
-h x -p 0
First active port on HFI x.
-h 0 -p y
Port y within system (no matter which ports are active).
-h x -p y
HFI x, port y.
Point Syntax
gid:value
value is numeric port GID of form: subnet:guid.
lid:value
value is numeric LID.
lid:value:node
value is numeric LID, selects entire node with given LID.
lid:value:port:value2
value is numeric LID of node, value2 is port number.
portguid:value
value is numeric port GUID.
nodeguid:value
value is numeric node GUID.
nodeguid:value1:port:value2
value1 is numeric node GUID, value2 is port number.
iocguid:value
value is numeric IOC GUID.
iocguid:value1:port:value2
value1 is numeric IOC GUID, value2 is port number.
systemguid:value
value is numeric system image GUID.
systemguid:value1:port:value2
value1 is the numeric system image GUID, value2 is port number.
ioc:value
value is IOC Profile ID String (IOC Name).
ioc:value1:port:value2
value1 is IOC Profile ID String (IOC Name), value2 is port number.
iocpat:value
value is glob pattern for IOC Profile ID String (IOC Name).
iocpat:value1:port:value2
value1 is glob pattern for IOC Profile ID String (IOC Name), value2 is port
number.
ioctype:value
value is IOC type (SRP or OTHER).
ioctype:value1:port:value2
value1 is IOC type (SRP or OTHER); value2 is port number.
node:value
value is node description (node name).
node:value1:port:value2
value1 is node description (node name), value2 is port number.
nodepat:value
value is glob pattern for node description (node name).
nodepat:value1:port:value2
value1 is the glob pattern for the node description (node name), value2 is port
number.
nodedetpat:value
value is glob pattern for node details.
nodedetpat:value1:port:value2
value1 is the glob pattern for the node details, value2 is port number.
nodetype:value
value is node type (SW or FI).
nodetype:value1:port:value2
value1 is node type (SW or FI), value2 is port number.
rate:value
value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.
portstate:value
value is a string for state (down, init, armed, active, notactive, initarmed).
portphysstate:value
value is a string for PHYs state (polling, disabled, training, linkup, recovery,
offline, test)
mtucap:value
value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.
labelpat:value
value is glob pattern for cable label.
lengthpat:value
value is glob pattern for cable length.
cabledetpat:value
value is glob pattern for cable details.
cabinflenpat:value
value is glob pattern for cable info length.
cabinfvendnamepat:value
value is glob pattern for cable info vendor name.
cabinfvendpnpat:value
value is glob pattern for cable info vendor part number.
cabinfvendrevpat:value
value is glob pattern for cable info vendor revision.
cabinfvendsnpat:value
value is glob pattern for cable info vendor serial number.
cabinftype:value
value is either optical, passive_copper, active_copper, or unknown.
linkdetpat:value
value is glob pattern for link details.
portdetpat:value
value is glob pattern for port details.
sm
Specifies the master subnet manager (SM).
smdetpat:value
value is glob pattern for SM details.
route:point1:point2
Specifies all ports along the routes between the two given points.
led:value
value is either on or off for LED port beacon.
linkqual:value
Specifies the ports with a link quality equal to value.
linkqualLE:value
Specifies the ports with a link quality less than or equal to value.
linkqualGE:value
Specifies the ports with a link quality greater than or equal to value.
nodepatfile:FILENAME
Specifies the name of file with the list of nodepats or node descriptions.
nodepairpatfile:FILENAME
Specifies the name of file with the list of node pairs, separated by a colon.
ldr
Specifies the ports with a non-zero link down reason or neighbor link down
reason.
ldr:value
Specifies the ports with a link down reason or neighbor link down reason equal
to value.
The portion of the script that calls opareport and opaxmlextract follows:
opareport -o comps -s -x -d 10 $@ | opaxmlextract -d ;
-e NodeDesc -e SystemImageGUID -e PortNum -e XmitDataMB
-e XmitData -e XmitPkts -e RcvDataMB -e RcvData -e RcvPkts
-e SymbolErrors -e LinkErrorRecovery -e LinkDowned -e PortRcvErrors
-e PortRcvRemotePhysicalErrors -e PortRcvSwitchRelayErrors
-e PortXmitDiscards -e PortXmitConstraintErrors
-e PortRcvConstraintErrors -e LocalLinkIntegrityErrors
-e ExcessiveBufferOverrunErrors -e VL15Dropped -s Neighbor -s SMs
Example
opaextractperf
opaextractperf -h 1 -p 2