Provided by: opa-fastfabric_10.10.3.0.11-1ubuntu3_amd64 
NAME
opaextractstat2
Performs an error analysis of a fabric and provides augmented information from a
topology_file including all error counters. The output is in a CSV format suitable for
importing into a spreadsheet or parsed by other scripts. opaextractstat2 is a front end to
the opareport and opaxmlextract tools.
Syntax
opaextractstat2 topology_file [opareport options]
Options
--help
Produces full help text.
topology_file
Specifies topology_file to use.
opareport options
The following options are passed to opareport. This subset is considered typical
and useful for this command. By design, the tool ignores -o/--output report
option.
-h/--hfi hfi
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port
port is a system-wide port number. Default is 0.
-p/--port port
Specifies the port, numbered 1..n. Using 0 specifies the first active
port. Default is 0.
-X/--infile snapshot_input
Generates a report using the data in the snapshot_input file.
snapshot_input must have been generated during a previous -o snapshot
run. When used, the -s, -i, -C, and -a options are ignored. '-' may be
used as the snapshot_input to specify stdin.
-i/--interval seconds
Obtains performance statistics over interval seconds. Clears all
statistics, waits interval seconds, then generates report. Implies -s
option.
-b / --begin date_time
Obtains past performance stats over an interval beginning at
date_time. Implies -s option. date_time may be a time entered as
HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date
followed by time; for example, "2016-07-04 14:40". Relative times are
taken as "x [second|minute|hour|day](s) ago.
-e / --end date_time
Obtains past performance stats over an interval ending at date_time.
Implies -s option.
date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY,
dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example,
"2016-07-04 14:40". Relative times are taken as "x
[second|minute|hour|day](s) ago.
-C/--clear
Clears performance statistics for all ports. Only statistics with
error thresholds are cleared. A clear occurs after generating the
report.
-a/--clearall
Clears all performance statistics for all ports.
-M/--pmadirect
Accesses performance statistics using direct PMA.
-A/--allports
Gets PortInfo for down switch ports. Uses direct SMA to get this data.
If used with -M, also gets PMA stats for down switch ports.
-c/--config file
Specifies the error thresholds configuration file. Default is
/etc/opa/opamon.conf file.
-L/--limit
Limits operation to exact specified focus with -F for port error
counters check (-o errors) and port counters clear (-C or -i).
Normally, the neighbor of each selected port is also checked/cleared.
Does not affect other reports.
-F/--focus point
Specifies the focus area for report. Used for all reports except route
to limit scope of report. Refer to Point Syntax for details.
-h and -p options permit a variety of selections:
-h 0
First active port in system (Default).
-h 0 -p 0
First active port in system.
-h x
First active port on HFI x.
-h x -p 0
First active port on HFI x.
-h 0 -p y
Port y within system (no matter which ports are active).
-h x -p y
HFI x, port y.
Point Syntax
gid:value
value is numeric port GID of form: subnet:guid.
lid:value
value is numeric LID.
lid:value:node
value is numeric LID, selects entire node with given LID.
lid:value:port:value2
value is numeric LID of node, value2 is port number.
portguid:value
value is numeric port GUID.
nodeguid:value
value is numeric node GUID.
nodeguid:value1:port:value2
value1 is numeric node GUID, value2 is port number.
iocguid:value
value is numeric IOC GUID.
iocguid:value1:port:value2
value1 is numeric IOC GUID, value2 is port number.
systemguid:value
value is numeric system image GUID.
systemguid:value1:port:value2
value1 is the numeric system image GUID, value2 is port number.
ioc:value
value is IOC Profile ID String (IOC Name).
ioc:value1:port:value2
value1 is IOC Profile ID String (IOC Name), value2 is port number.
iocpat:value
value is glob pattern for IOC Profile ID String (IOC Name).
iocpat:value1:port:value2
value1 is glob pattern for IOC Profile ID String (IOC Name), value2 is port
number.
ioctype:value
value is IOC type (SRP or OTHER).
ioctype:value1:port:value2
value1 is IOC type (SRP or OTHER); value2 is port number.
node:value
value is node description (node name).
node:value1:port:value2
value1 is node description (node name), value2 is port number.
nodepat:value
value is glob pattern for node description (node name).
nodepat:value1:port:value2
value1 is the glob pattern for the node description (node name), value2 is port
number.
nodedetpat:value
value is glob pattern for node details.
nodedetpat:value1:port:value2
value1 is the glob pattern for the node details, value2 is port number.
nodetype:value
value is node type (SW or FI).
nodetype:value1:port:value2
value1 is node type (SW or FI), value2 is port number.
rate:value
value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.
portstate:value
value is a string for state (down, init, armed, active, notactive, initarmed).
portphysstate:value
value is a string for PHYs state (polling, disabled, training, linkup, recovery,
offline, test)
mtucap:value
value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.
labelpat:value
value is glob pattern for cable label.
lengthpat:value
value is glob pattern for cable length.
cabledetpat:value
value is glob pattern for cable details.
cabinflenpat:value
value is glob pattern for cable info length.
cabinfvendnamepat:value
value is glob pattern for cable info vendor name.
cabinfvendpnpat:value
value is glob pattern for cable info vendor part number.
cabinfvendrevpat:value
value is glob pattern for cable info vendor revision.
cabinfvendsnpat:value
value is glob pattern for cable info vendor serial number.
cabinftype:value
value is either optical, passive_copper, active_copper, or unknown.
linkdetpat:value
value is glob pattern for link details.
portdetpat:value
value is glob pattern for port details.
sm
Specifies the master subnet manager (SM).
smdetpat:value
value is glob pattern for SM details.
route:point1:point2
Specifies all ports along the routes between the two given points.
led:value
value is either on or off for LED port beacon.
linkqual:value
Specifies the ports with a link quality equal to value.
linkqualLE:value
Specifies the ports with a link quality less than or equal to value.
linkqualGE:value
Specifies the ports with a link quality greater than or equal to value.
nodepatfile:FILENAME
Specifies the name of file with the list of nodepats or node descriptions.
nodepairpatfile:FILENAME
Specifies the name of file with the list of node pairs, separated by a colon.
ldr
Specifies the ports with a non-zero link down reason or neighbor link down
reason.
ldr:value
Specifies the ports with a link down reason or neighbor link down reason equal
to value.
The portion of the script that calls opareport and opaxmlextract follows:opareport -x -d
10 -s -o errors -T $@ | opaxmlextract -d ;
-e Rate -e MTU -e Internal -e LinkDetails -e CableLength -e CableLabel
-e CableDetails -e Port.NodeGUID -e Port.PortGUID -e Port.PortNum
-e Port.PortType -e Port.NodeDesc -e Port.PortDetails
-e PortXmitData.Value -e PortXmitPkts.Value -e PortRcvData.Value
-e PortRcvPkts.Value -e SymbolErrors.Value -e LinkErrorRecovery.Value
-e LinkDowned.Value -e PortRcvErrors.Value
-e PortRcvRemotePhysicalErrors.Value -e PortRcvSwitchRelayErrors.Value
-e PortXmitConstraintErrors.Value -e PortRcvConstraintErrors.Value
-e LocalLinkIntegrityErrors.Value -e ExcessiveBufferOverrunErrors.Value
Examples
opaextractstat2 topology_file
opaextractstat2 topology_file -c my_opamon.conf