Provided by: openvswitch-vtep_3.3.0-1ubuntu3_amd64 bug

NAME

       vtep-ctl - utility for querying and configuring a VTEP database

SYNOPSIS

       vtep-ctl [options] -- [options] command [args] [-- [options] command [args]]...

DESCRIPTION

       The   vtep-ctl  program  configures  a  VTEP  database.   See  vtep(5)  for  comprehensive
       documentation of the database schema.

       vtep-ctl connects to an ovsdb-server process that maintains a VTEP configuration database.
       Using  this connection, it queries and possibly applies changes to the database, depending
       on the supplied commands.

       vtep-ctl can perform any number of commands in a  single  run,  implemented  as  a  single
       atomic transaction against the database.

       The vtep-ctl command line begins with global options (see OPTIONS below for details).  The
       global options are followed by one or more commands.  Each command should begin with -- by
       itself  as  a  command-line argument, to separate it from the following commands.  (The --
       before the first command is optional.)  The command itself  starts  with  command-specific
       options,  if  any, followed by the command name and any arguments.  See EXAMPLES below for
       syntax examples.

OPTIONS

       The following options affect the behavior vtep-ctl as a whole.  Some  individual  commands
       also accept their own options, which are given just before the command name.  If the first
       command on the command line has options, then those options must  be  separated  from  the
       global options by --.

       --db=server
              Sets  server  as  the  database  server  that  vtep-ctl contacts to query or modify
              configuration.  server may be an OVSDB active  or  passive  connection  method,  as
              described in ovsdb(7).  The default is unix:/var/run/openvswitch/db.sock.

       --no-syslog
              By  default,  vtep-ctl  logs  its  arguments and the details of any changes that it
              makes to the system log.  This option disables this logging.

              This option is equivalent to --verbose=vtep_ctl:syslog:warn.

       --oneline
              Modifies the output format so that the output for each  command  is  printed  on  a
              single  line.   New-line characters that would otherwise separate lines are printed
              as \n, and any instances of \  that  would  otherwise  appear  in  the  output  are
              doubled.   Prints  a  blank  line for each command that has no output.  This option
              does not affect the formatting of output from the list or find commands; see  Table
              Formatting Options below.

       --dry-run
              Prevents vtep-ctl from actually modifying the database.

       -t secs
       --timeout=secs
              By  default,  or  with  a secs of 0, vtep-ctl waits forever for a response from the
              database.  This option limits  runtime  to  approximately  secs  seconds.   If  the
              timeout  expires,  vtep-ctl  will  exit  with  a  SIGALRM signal.  (A timeout would
              normally happen only if the database cannot be  contacted,  or  if  the  system  is
              overloaded.)

   Table Formatting Options
       These options control the format of output from the list and find commands.

       -f format
       --format=format
              Sets the type of table formatting.  The following types of format are available:

              table  2-D text tables with aligned columns.

              list (default)
                     A list with one column per line and rows separated by a blank line.

              html   HTML tables.

              csv    Comma-separated values as defined in RFC 4180.

              json   JSON  format  as  defined  in  RFC  4627.   The output is a sequence of JSON
                     objects, each of which corresponds to one table.  Each JSON object  has  the
                     following members with the noted values:

                     caption
                            The  table's  caption.   This  member  is omitted if the table has no
                            caption.

                     headings
                            An array with one element per table column.  Each array element is  a
                            string giving the corresponding column's heading.

                     data   An  array  with  one  element per table row.  Each element is also an
                            array with one element  per  table  column.   The  elements  of  this
                            second-level  array  are  the cells that constitute the table.  Cells
                            that represent OVSDB data or data types are expressed in  the  format
                            described   in  the  OVSDB  specification;  other  cells  are  simply
                            expressed as text strings.

       -d format
       --data=format
              Sets the formatting for cells within output tables unless the table format  is  set
              to  json,  in which case json formatting is always used when formatting cells.  The
              following types of format are available:

              string (default)
                     The simple format described in the Database Values section of ovs-vsctl(8).

              bare   The simple format with punctuation stripped  off:  []  and  {}  are  omitted
                     around  sets, maps, and empty columns, items within sets and maps are space-
                     separated, and strings are never quoted.  This  format  may  be  easier  for
                     scripts to parse.

              json   The RFC 4627 JSON format as described above.

       --no-headings
              This  option  suppresses the heading row that otherwise appears in the first row of
              table output.

       --pretty
              By default, JSON in output is printed as compactly as possible.  This option causes
              JSON  in  output  to be printed in a more readable fashion.  Members of objects and
              elements of arrays are printed one per line, with indentation.

              This option does not affect JSON in tables, which is always printed compactly.

       --bare Equivalent to --format=list --data=bare --no-headings.

       --max-column-width=n
              For table output only, limits the width of any column in the output to  n  columns.
              Longer cell data is truncated to fit, as necessary.  Columns are always wide enough
              to display the column names, if the heading row is printed.

   Public Key Infrastructure Options
       -p privkey.pem
       --private-key=privkey.pem
              Specifies a PEM file containing the private key used  as  vtep-ctl's  identity  for
              outgoing SSL connections.

       -c cert.pem
       --certificate=cert.pem
              Specifies  a  PEM  file  containing  a  certificate  that certifies the private key
              specified on -p or --private-key to be trustworthy.  The certificate must be signed
              by  the  certificate  authority  (CA)  that the peer in SSL connections will use to
              verify it.

       -C cacert.pem
       --ca-cert=cacert.pem
              Specifies a PEM file containing the CA certificate  that  vtep-ctl  should  use  to
              verify  certificates  presented  to  it  by  SSL  peers.   (This  may  be  the same
              certificate that SSL peers use  to  verify  the  certificate  specified  on  -c  or
              --certificate, or it may be a different one, depending on the PKI design in use.)

       -C none
       --ca-cert=none
              Disables  verification  of  certificates presented by SSL peers.  This introduces a
              security risk, because it means that certificates cannot be verified to be those of
              known trusted hosts.

       --bootstrap-ca-cert=cacert.pem
              When  cacert.pem exists, this option has the same effect as -C or --ca-cert.  If it
              does not exist, then vtep-ctl will attempt to obtain the CA  certificate  from  the
              SSL  peer  on its first SSL connection and save it to the named PEM file.  If it is
              successful, it will immediately drop the connection and reconnect, and from then on
              all  SSL  connections  must  be  authenticated  by  a  certificate signed by the CA
              certificate thus obtained.

              This option exposes the SSL connection to a man-in-the-middle attack obtaining  the
              initial CA certificate, but it may be useful for bootstrapping.

              This  option is only useful if the SSL peer sends its CA certificate as part of the
              SSL certificate chain.  The SSL protocol does not require the server to send the CA
              certificate.

              This option is mutually exclusive with -C and --ca-cert.

       --peer-ca-cert=peer-cacert.pem
              Specifies  a  PEM file that contains one or more additional certificates to send to
              SSL peers.  peer-cacert.pem should be the CA certificate used  to  sign  vtep-ctl's
              own  certificate,  that  is,  the certificate specified on -c or --certificate.  If
              vtep-ctl's certificate is self-signed, then --certificate and --peer-ca-cert should
              specify the same file.

              This  option  is  not useful in normal operation, because the SSL peer must already
              have the CA certificate for the peer to have any confidence in vtep-ctl's identity.
              However,  this  offers a way for a new installation to bootstrap the CA certificate
              on its first SSL connection.

       -v[spec]
       --verbose=[spec]
              Sets logging levels.  Without any spec, sets the log level  for  every  module  and
              destination  to  dbg.   Otherwise,  spec  is a list of words separated by spaces or
              commas or colons, up to one from each category below:

              •      A valid module name, as displayed by the vlog/list command on ovs-appctl(8),
                     limits the log level change to the specified module.

              •      syslog,  console,  or  file,  to  limit  the log level change to only to the
                     system log, to the console, or to a file,  respectively.   (If  --detach  is
                     specified,  vtep-ctl closes its standard file descriptors, so logging to the
                     console will have no effect.)

                     On Windows platform, syslog is accepted as a word and is only  useful  along
                     with the --syslog-target option (the word has no effect otherwise).

              •      off,  emer,  err, warn, info, or dbg, to control the log level.  Messages of
                     the given severity or higher will be logged, and messages of lower  severity
                     will  be filtered out.  off filters out all messages.  See ovs-appctl(8) for
                     a definition of each log level.

              Case is not significant within spec.

              Regardless of the log levels set for file, logging to a file will  not  take  place
              unless --log-file is also specified (see below).

              For  compatibility with older versions of OVS, any is accepted as a word but has no
              effect.

       -v
       --verbose
              Sets the maximum logging verbosity level, equivalent to --verbose=dbg.

       -vPATTERN:destination:pattern
       --verbose=PATTERN:destination:pattern
              Sets the log pattern for destination to pattern.   Refer  to  ovs-appctl(8)  for  a
              description of the valid syntax for pattern.

       -vFACILITY:facility
       --verbose=FACILITY:facility
              Sets  the  RFC5424  facility of the log message. facility can be one of kern, user,
              mail, daemon, auth, syslog, lpr, news, uucp, clock, ftp, ntp, audit, alert, clock2,
              local0, local1, local2, local3, local4, local5, local6 or local7. If this option is
              not specified, daemon is used as the default for the local system syslog and local0
              is  used  while  sending  a  message to the target provided via the --syslog-target
              option.

       --log-file[=file]
              Enables logging to a file.  If file is specified, then it is used as the exact name
              for  the  log  file.   The  default  log  file  name  used  if  file  is omitted is
              /var/log/openvswitch/vtep-ctl.log.

       --syslog-target=host:port
              Send syslog messages to UDP port on host, in addition to the  system  syslog.   The
              host must be a numerical IP address, not a hostname.

       --syslog-method=method
              Specify  method  how  syslog  messages  should be sent to syslog daemon.  Following
              forms are supported:

              •      libc, use libc syslog() function.  Downside of using this  options  is  that
                     libc  adds  fixed  prefix to every message before it is actually sent to the
                     syslog daemon over /dev/log UNIX domain socket.

              •      unix:file, use UNIX domain socket  directly.   It  is  possible  to  specify
                     arbitrary  message format with this option.  However, rsyslogd 8.9 and older
                     versions use hard coded parser  function  anyway  that  limits  UNIX  domain
                     socket use.  If you want to use arbitrary message format with older rsyslogd
                     versions, then use UDP socket to localhost IP address instead.

              •      udp:ip:port, use UDP socket.   With  this  method  it  is  possible  to  use
                     arbitrary  message  format  also  with  older rsyslogd.  When sending syslog
                     messages over UDP socket extra precaution needs to be  taken  into  account,
                     for example, syslog daemon needs to be configured to listen on the specified
                     UDP port, accidental iptables rules could be interfering with  local  syslog
                     traffic  and  there  are  some  security  considerations  that  apply to UDP
                     sockets, but do not apply to UNIX domain sockets.

              •      null, discards all messages logged to syslog.

              The default is taken from the OVS_SYSLOG_METHOD  environment  variable;  if  it  is
              unset, the default is libc.

       -h
       --help Prints a brief help message to the console.

       -V
       --version
              Prints version information to the console.

COMMANDS

       The commands implemented by vtep-ctl are described in the sections below.

   Physical Switch Commands
       These commands examine and manipulate physical switches.

       [--may-exist] add-ps pswitch
              Creates  a  new  physical  switch named pswitch.  Initially the switch will have no
              ports.

              Without --may-exist, attempting to create a switch that exists is an  error.   With
              --may-exist, this command does nothing if pswitch already exists.

       [--if-exists] del-ps pswitch
              Deletes pswitch and all of its ports.

              Without --if-exists, attempting to delete a switch that does not exist is an error.
              With --if-exists, attempting to delete a switch that does not exist has no effect.

       list-ps
              Lists all existing physical switches on standard output, one per line.

       ps-exists pswitch
              Tests whether pswitch exists.  If so, vtep-ctl exits successfully with exit code 0.
              If not, vtep-ctl exits unsuccessfully with exit code 2.

   Port Commands
       These commands examine and manipulate VTEP physical ports.

       list-ports pswitch
              Lists all of the ports within pswitch on standard output, one per line.

       [--may-exist] add-port pswitch port
              Creates on pswitch a new port named port from the network device of the same name.

              Without  --may-exist,  attempting  to  create a port that exists is an error.  With
              --may-exist, this command does nothing if port already exists on pswitch.

       [--if-exists] del-port [pswitch] port
              Deletes port.  If pswitch is omitted, port is removed from whatever switch contains
              it; if pswitch is specified, it must be the switch that contains port.

              Without  --if-exists,  attempting to delete a port that does not exist is an error.
              With --if-exists, attempting to delete a port that does not exist has no effect.

   Logical Switch Commands
       These commands examine and manipulate logical switches.

       [--may-exist] add-ls lswitch
              Creates a new logical switch named lswitch.  Initially  the  switch  will  have  no
              locator bindings.

              Without  --may-exist,  attempting to create a switch that exists is an error.  With
              --may-exist, this command does nothing if lswitch already exists.

       [--if-exists] del-ls lswitch
              Deletes lswitch.

              Without --if-exists, attempting to delete a switch that does not exist is an error.
              With --if-exists, attempting to delete a switch that does not exist has no effect.

       list-ls
              Lists all existing logical switches on standard output, one per line.

       ls-exists lswitch
              Tests whether lswitch exists.  If so, vtep-ctl exits successfully with exit code 0.
              If not, vtep-ctl exits unsuccessfully with exit code 2.

       bind-ls pswitch port vlan lswitch
              Bind logical switch lswitch to the port/vlan combination  on  the  physical  switch
              pswitch.

       unbind-ls pswitch port vlan
              Remove  the  logical  switch binding from the port/vlan combination on the physical
              switch pswitch.

       list-bindings pswitch port
              List the logical switch bindings for port on the physical switch pswitch.

       set-replication-mode lswitch replication-mode
              Set logical switch lswitch replication mode to  replication-mode;  the  only  valid
              values  for replication mode are "service_node" and "source_node".  For handling L2
              broadcast, multicast and unknown unicast  traffic,  packets  can  be  sent  to  all
              members  of  a logical switch referenced by a physical switch.  There are different
              modes to replicate the packets.  The default mode of replication  is  to  send  the
              traffic  to a service node, which can be a hypervisor, server or appliance, and let
              the service node handle replication to other transport nodes (hypervisors or  other
              VTEP  physical  switches).   This  mode  is  called  service  node replication.  An
              alternate mode of replication, called source node replication involves  the  source
              node  sending to all other transport nodes.  Hypervisors are always responsible for
              doing their own replication for locally attached VMs in both modes.   Service  node
              mode  is  the default, if the replication mode is not explicitly set.  Service node
              replication mode is considered a basic requirement because it only requires sending
              the packet to a single transport node.

       get-replication-mode lswitch
              Get logical switch lswitch replication mode.  The only valid values for replication
              mode are "service_node" and "source_node".  An empty  reply  for  replication  mode
              implies a default of "service_node".

   Logical Router Commands
       These commands examine and manipulate logical routers.

       [--may-exist] add-lr lrouter
              Creates a new logical router named lrouter.

              Without  --may-exist,  attempting to create a router that exists is an error.  With
              --may-exist, this command does nothing if lrouter already exists.

       [--if-exists] del-lr lrouter
              Deletes lrouter.

              Without --if-exists, attempting to delete a router that does not exist is an error.
              With --if-exists, attempting to delete a router that does not exist has no effect.

       list-lr
              Lists all existing logical routers on standard output, one per line.

       lr-exists lrouter
              Tests whether lrouter exists.  If so, vtep-ctl exits successfully with exit code 0.
              If not, vtep-ctl exits unsuccessfully with exit code 2.

   Local MAC Binding Commands
       These commands examine and manipulate local MAC bindings  for  the  logical  switch.   The
       local maps are written by the VTEP to refer to MACs it has learned on its physical ports.

       add-ucast-local lswitch mac [encap] ip
              Map   the   unicast  Ethernet  address  mac  to  the  physical  location  ip  using
              encapsulation encap on  lswitch.   If  encap  is  not  specified,  the  default  is
              "vxlan_over_ipv4".   The  local  mappings  are  used  by  the VTEP to refer to MACs
              learned on its physical ports.

       del-ucast-local lswitch mac
              Remove the local unicast Ethernet address mac map from lswitch.  The local mappings
              are used by the VTEP to refer to MACs learned on its physical ports.

       add-mcast-local lswitch mac [encap] ip
              Add  physical  location ip using encapsulation encap to the local mac binding table
              for multicast Ethernet address mac on lswitch.  If  encap  is  not  specified,  the
              default  is "vxlan_over_ipv4".  The local mappings are used by the VTEP to refer to
              MACs learned on its physical ports.

       del-mcast-local lswitch mac [encap] ip
              Remove physical location ip using encapsulation encap from the  local  mac  binding
              table  for  multicast  Ethernet address mac on lswitch.  If encap is not specified,
              the default is "vxlan_over_ipv4".  The local mappings are used by the VTEP to refer
              to MACs learned on its physical ports.

       clear-local-macs lswitch
              Clear the local MAC bindings for lswitch.

       list-local-macs lswitch
              List the local MAC bindings for lswitch, one per line.

   Remote MAC Binding Commands
       These  commands  examine  and  manipulate  local  and  remote MAC bindings for the logical
       switch.  The remote maps are written by the network virtualization controller to refer  to
       MACs that it has learned.

       add-ucast-remote lswitch mac [encap] ip
              Map   the   unicast  Ethernet  address  mac  to  the  physical  location  ip  using
              encapsulation encap on  lswitch.   If  encap  is  not  specified,  the  default  is
              "vxlan_over_ipv4".   The  remote  mappings  are  used by the network virtualization
              platform to refer to MACs that it has learned.

       del-ucast-remote lswitch mac
              Remove the remote unicast Ethernet  address  mac  map  from  lswitch.   The  remote
              mappings  are  used by the network virtualization platform to refer to MACs that it
              has learned.

       add-mcast-remote lswitch mac [encap] ip
              Add physical location ip using encapsulation encap to the remote mac binding  table
              for  multicast  Ethernet  address  mac  on lswitch.  If encap is not specified, the
              default is  "vxlan_over_ipv4".   The  remote  mappings  are  used  by  the  network
              virtualization platform to refer to MACs that it has learned.

       del-mcast-remote lswitch mac [encap] ip
              Remove  physical  location ip using encapsulation encap from the remote mac binding
              table for multicast Ethernet address mac on lswitch.  If encap  is  not  specified,
              the  default  is  "vxlan_over_ipv4".   The  remote mappings are used by the network
              virtualization platform to refer to MACs that it has learned.

       clear-remote-macs lswitch
              Clear the remote MAC bindings for lswitch.

       list-remote-macs lswitch
              List the remote MAC bindings for lswitch, one per line.

   Manager Connectivity
       These commands manipulate the managers column in the Global table and rows in the Managers
       table.   When  ovsdb-server is configured to use the managers column for OVSDB connections
       (as described in the  startup  scripts  provided  with  Open  vSwitch),  this  allows  the
       administrator to use vtep-ctl to configure database connections.

       get-manager
              Prints the configured manager(s).

       del-manager
              Deletes the configured manager(s).

       set-manager target...
              Sets  the configured manager target or targets.  Each target may be an OVSDB active
              or passive connection method, e.g. pssl:6640, as described in ovsdb(7).

   Database Commands
       These commands query and  modify  the  contents  of  ovsdb  tables.   They  are  a  slight
       abstraction  of  the  ovsdb interface and as such they operate at a lower level than other
       vtep-ctl commands.

     Identifying Tables, Records, and Columns

       Each of these commands has a table parameter to identify  a  table  within  the  database.
       Many  of  them  also  take a record parameter that identifies a particular record within a
       table.  The record parameter may  be  the  UUID  for  a  record,  and  many  tables  offer
       additional  ways  to  identify  records.   Some  commands also take column parameters that
       identify a particular field within the records in a table.

       The following tables are currently defined:

       Global Top-level configuration for a hardware  VTEP.   This  table  contains  exactly  one
              record, identified by specifying . as the record name.

       Manager
              Configuration  for  an OVSDB connection.  Records may be identified by target (e.g.
              tcp:1.2.3.4).

       Physical_Switch
              A physical switch that implements a VTEP.  Records may be  identified  by  physical
              switch name.

       Physical_Port
              A port within a physical switch.

       Logical_Binding_Stats
              Reports  statistics  for the logical switch with which a VLAN on a physical port is
              associated.

       Logical_Switch
              A logical Ethernet switch.  Records may be identified by logical switch name.

       Ucast_Macs_Local
              Mapping of locally discovered unicast MAC addresses to tunnels.

       Ucast_Macs_Remote
              Mapping of remotely programmed unicast MAC addresses to tunnels.

       Mcast_Macs_Local
              Mapping of locally discovered multicast MAC addresses to tunnels.

       Mcast_Macs_Remote
              Mapping of remotely programmed multicast MAC addresses to tunnels.

       Physical_Locator_Set
              A set of one or more physical locators.

       Physical_Locator
              Identifies an endpoint to which logical switch  traffic  may  be  encapsulated  and
              forwarded.  Records may be identified by physical locator name.

       Record  names must be specified in full and with correct capitalization, except that UUIDs
       may be abbreviated to their first 4 (or more) hex digits, as long as that is unique within
       the  table.   Names  of tables and columns are not case-sensitive, and - and _ are treated
       interchangeably.  Unique abbreviations of table and column names are acceptable, e.g.  man
       or m is sufficient to identify the Manager table.

     Database Values

       Each  column  in  the  database accepts a fixed type of data.  The currently defined basic
       types, and their representations, are:

       integer
              A decimal integer in the range -2**63 to 2**63-1, inclusive.

       real   A floating-point number.

       Boolean
              True or false, written true or false, respectively.

       string An arbitrary Unicode string, except that null bytes are not  allowed.   Quotes  are
              optional  for  most  strings  that  begin  with an English letter or underscore and
              consist only of letters, underscores, hyphens,  and  periods.   However,  true  and
              false  and  strings  that match the syntax of UUIDs (see below) must be enclosed in
              double quotes to distinguish them from other basic types.  When double  quotes  are
              used, the syntax is that of strings in JSON, e.g. backslashes may be used to escape
              special characters.  The empty string must be  represented  as  a  pair  of  double
              quotes ("").

       UUID   Either   a   universally   unique  identifier  in  the  style  of  RFC  4122,  e.g.
              f81d4fae-7dec-11d0-a765-00a0c91e6bf6, or an  @name  defined  by  a  get  or  create
              command within the same vtep-ctl invocation.

       Multiple  values  in  a  single column may be separated by spaces or a single comma.  When
       multiple values are present, duplicates are not  allowed,  and  order  is  not  important.
       Conversely,  some database columns can have an empty set of values, represented as [], and
       square brackets may optionally enclose other non-empty sets or single values as well.  For
       a  column  accepting  a  set  of  integers,  database  commands accept a range. A range is
       represented by two integers separated by -. A range is inclusive. A range  has  a  maximum
       size  of  4096  elements.  If  more elements are needed, they can be specified in separate
       ranges.

       A few database columns are ``maps'' of key-value pairs, where the key and  the  value  are
       each  some  fixed database type.  These are specified in the form key=value, where key and
       value follow the syntax for the column's key type  and  value  type,  respectively.   When
       multiple  pairs  are  present  (separated  by  spaces  or a comma), duplicate keys are not
       allowed, and again the order is not important.  Duplicate values are  allowed.   An  empty
       map is represented as {}.  Curly braces may optionally enclose non-empty maps as well (but
       use quotes  to  prevent  the  shell  from  expanding  other-config={0=x,1=y}  into  other-
       config=0=x other-config=1=y, which may not have the desired effect).

     Database Command Syntax

       [--if-exists] [--columns=column[,column]...] list table [record]...
              Lists  the  data  in each specified record.  If no records are specified, lists all
              the records in table.

              If --columns is specified, only the requested columns are listed, in the  specified
              order.  Otherwise, all columns are listed, in alphabetical order by column name.

              Without  --if-exists,  it is an error if any specified record does not exist.  With
              --if-exists, the command ignores any record that does not exist, without  producing
              any output.

       [--columns=column[,column]...] find table [column[:key]=value]...
              Lists  the  data  in  each  record in table whose column equals value or, if key is
              specified, whose column contains a key with the  specified  value.   The  following
              operators may be used where = is written in the syntax summary:

              = != < > <= >=
                     Selects  records in which column[:key] equals, does not equal, is less than,
                     is greater than, is less than or equal to, or is greater than  or  equal  to
                     value, respectively.

                     Consider  column[:key]  and  value  as sets of elements.  Identical sets are
                     considered  equal.   Otherwise,  if  the  sets  have  different  numbers  of
                     elements,  then  the  set  with  more  elements  is considered to be larger.
                     Otherwise, consider a element from each set pairwise,  in  increasing  order
                     within each set.  The first pair that differs determines the result.  (For a
                     column that contains key-value pairs, first all the keys are  compared,  and
                     values are considered only if the two sets contain identical keys.)

              {=} {!=}
                     Test for set equality or inequality, respectively.

              {<=}   Selects  records  in  which column[:key] is a subset of value.  For example,
                     flood-vlans{<=}1,2 selects records in which the flood-vlans  column  is  the
                     empty set or contains 1 or 2 or both.

              {<}    Selects  records  in  which  column[:key]  is a proper subset of value.  For
                     example, flood-vlans{<}1,2 selects records in which the  flood-vlans  column
                     is the empty set or contains 1 or 2 but not both.

              {>=} {>}
                     Same  as  {<=}  and  {<},  respectively,  except  that  the  relationship is
                     reversed.  For example, flood-vlans{>=}1,2  selects  records  in  which  the
                     flood-vlans column contains both 1 and 2.

              The following operators are available only in Open vSwitch 2.16 and later:

              {in}   Selects  records  in  which  every element in column[:key] is also in value.
                     (This is the same as {<=}.)

              {not-in}
                     Selects records in which every element in column[:key] is not in value.

              For arithmetic operators (= != < > <= >=), when key is specified but  a  particular
              record's  column  does  not  contain  key,  the  record  is always omitted from the
              results.  Thus, the condition other-config:mtu!=1500 matches records  that  have  a
              mtu key whose value is not 1500, but not those that lack an mtu key.

              For  the set operators, when key is specified but a particular record's column does
              not contain key, the comparison is done against an empty set.  Thus, the  condition
              other-config:mtu{!=}1500  matches  records  that  have a mtu key whose value is not
              1500 and those that lack an mtu key.

              Don't forget to escape < or > from interpretation by the shell.

              If --columns is specified, only the requested columns are listed, in the  specified
              order.  Otherwise all columns are listed, in alphabetical order by column name.

              The UUIDs shown for rows created in the same vtep-ctl invocation will be wrong.

       [--if-exists] [--id=@name] get table record [column[:key]]...
              Prints  the  value  of each specified column in the given record in table.  For map
              columns, a key may optionally be specified, in which case the value associated with
              key in the column is printed, instead of the entire map.

              Without  --if-exists,  it is an error if record does not exist or key is specified,
              if key does not exist in record.  With --if-exists,  a  missing  record  yields  no
              output and a missing key prints a blank line.

              If  @name  is  specified,  then the UUID for record may be referred to by that name
              later in the same vtep-ctl invocation in contexts where a UUID is expected.

              Both --id and the column arguments are optional, but usually at least  one  or  the
              other  should  be specified.  If both are omitted, then get has no effect except to
              verify that record exists in table.

              --id and --if-exists cannot be used together.

       [--if-exists] set table record column[:key]=value...
              Sets the value of each specified column in the given record in table to value.  For
              map  columns, a key may optionally be specified, in which case the value associated
              with key in that column is changed (or added,  if  none  exists),  instead  of  the
              entire map.

              Without  --if-exists,  it  is an error if record does not exist.  With --if-exists,
              this command does nothing if record does not exist.

       [--if-exists] add table record column [key=]value...
              Adds the specified value or key-value pair to column in record in table.  If column
              is  a map, then key is required, otherwise it is prohibited.  If key already exists
              in a map column, then the current value is not replaced (use  the  set  command  to
              replace an existing value).

              Without  --if-exists,  it  is an error if record does not exist.  With --if-exists,
              this command does nothing if record does not exist.

       [--if-exists] remove table record column value...
       [--if-exists] remove table record column key...
       [--if-exists] remove table record column key=value...
              Removes the specified values or key-value pairs from column  in  record  in  table.
              The  first  form  applies  to  columns  that  are not maps: each specified value is
              removed from the column.  The second and third forms apply to map columns: if  only
              a  key  is  specified,  then  any  key-value  pair  with  the given key is removed,
              regardless of its value; if a value is given then a pair is removed  only  if  both
              key and value match.

              It  is  not  an  error if the column does not contain the specified key or value or
              pair.

              Without --if-exists, it is an error if record does not  exist.   With  --if-exists,
              this command does nothing if record does not exist.

       [--if-exists] clear table record column...
              Sets  each column in record in table to the empty set or empty map, as appropriate.
              This command applies only to columns that are allowed to be empty.

              Without --if-exists, it is an error if record does not  exist.   With  --if-exists,
              this command does nothing if record does not exist.

       [--id=(@name | uuid] create table column[:key]=value...
              Creates  a new record in table and sets the initial values of each column.  Columns
              not explicitly set will receive their default values.  Outputs the UUID of the  new
              row.

              If  @name  is  specified,  then the UUID for the new row may be referred to by that
              name elsewhere in the  same  vtep-ctl  invocation  in  contexts  where  a  UUID  is
              expected.  Such references may precede or follow the create command.

              If a valid uuid is specified, then it is used as the UUID of the new row.

              Caution (ovs-vsctl as example)
                     Records  in  the Open vSwitch database are significant only when they can be
                     reached directly or indirectly from  the  Open_vSwitch  table.   Except  for
                     records  in the QoS or Queue tables, records that are not reachable from the
                     Open_vSwitch table  are  automatically  deleted  from  the  database.   This
                     deletion  happens  immediately,  without  waiting  for  additional ovs-vsctl
                     commands or other database activity.  Thus, a create command must  generally
                     be  accompanied  by additional commands within the same ovs-vsctl invocation
                     to add a chain of references to the newly created record from the  top-level
                     Open_vSwitch record.  The EXAMPLES section gives some examples that show how
                     to do this.

       [--if-exists] destroy table record...
              Deletes each specified record from table.  Unless --if-exists  is  specified,  each
              records must exist.

       --all destroy table
              Deletes all records from the table.

              Caution (ovs-vsctl as example)
                     The  destroy  command is only useful for records in the QoS or Queue tables.
                     Records in other tables are automatically deleted  from  the  database  when
                     they  become  unreachable  from  the  Open_vSwitch  table.   This means that
                     deleting the last reference to a  record  is  sufficient  for  deleting  the
                     record  itself.   For  records in these tables, destroy is silently ignored.
                     See the EXAMPLES section below for more information.

       wait-until table record [column[:key]=value]...
              Waits until table contains a record named record whose column equals value  or,  if
              key  is  specified,  whose  column  contains  a key with the specified value.  This
              command supports the same operators and semantics described for  the  find  command
              above.

              If  no column[:key]=value arguments are given, this command waits only until record
              exists.  If more than one such argument is given, the command waits  until  all  of
              them are satisfied.

              Caution (ovs-vsctl as example)
                     Usually  wait-until  should be placed at the beginning of a set of ovs-vsctl
                     commands.  For example, wait-until bridge br0 -- get bridge br0  datapath_id
                     waits  until  a  bridge  named  br0  is created, then prints its datapath_id
                     column, whereas get bridge br0 datapath_id --  wait-until  bridge  br0  will
                     abort if no bridge named br0 exists when ovs-vsctl initially connects to the
                     database.

              Consider specifying --timeout=0 along with --wait-until, to prevent  vtep-ctl  from
              terminating after waiting only at most 5 seconds.

       comment [arg]...
              This  command has no effect on behavior, but any database log record created by the
              command will include the command and its arguments.

EXIT STATUS

       0      Successful program execution.

       1      Usage, syntax, or configuration file error.

       2      The switch argument to ps-exists specified the name of a physical switch that  does
              not exist.

SEE ALSO

       ovsdb-server(1), vtep(5).