Provided by: git-man_2.45.2-1ubuntu1_all 
NAME
git-rev-parse - Pick out and massage parameters
SYNOPSIS
git rev-parse [<options>] <arg>...
DESCRIPTION
Many Git porcelainish commands take a mixture of flags (i.e. parameters that begin with a
dash -) and parameters meant for the underlying git rev-list command they use internally
and flags and parameters for the other commands they use downstream of git rev-list. This
command is used to distinguish between them.
OPTIONS
Operation Modes
Each of these options must appear first on the command line.
--parseopt
Use git rev-parse in option parsing mode (see PARSEOPT section below).
--sq-quote
Use git rev-parse in shell quoting mode (see SQ-QUOTE section below). In contrast to
the --sq option below, this mode only does quoting. Nothing else is done to command
input.
Options for --parseopt
--keep-dashdash
Only meaningful in --parseopt mode. Tells the option parser to echo out the first --
met instead of skipping it.
--stop-at-non-option
Only meaningful in --parseopt mode. Lets the option parser stop at the first
non-option argument. This can be used to parse sub-commands that take options
themselves.
--stuck-long
Only meaningful in --parseopt mode. Output the options in their long form if
available, and with their arguments stuck.
Options for Filtering
--revs-only
Do not output flags and parameters not meant for git rev-list command.
--no-revs
Do not output flags and parameters meant for git rev-list command.
--flags
Do not output non-flag parameters.
--no-flags
Do not output flag parameters.
Options for Output
--default <arg>
If there is no parameter given by the user, use <arg> instead.
--prefix <arg>
Behave as if git rev-parse was invoked from the <arg> subdirectory of the working
tree. Any relative filenames are resolved as if they are prefixed by <arg> and will be
printed in that form.
This can be used to convert arguments to a command run in a subdirectory so that they
can still be used after moving to the top-level of the repository. For example:
prefix=$(git rev-parse --show-prefix)
cd "$(git rev-parse --show-toplevel)"
# rev-parse provides the -- needed for 'set'
eval "set $(git rev-parse --sq --prefix "$prefix" -- "$@")"
--verify
Verify that exactly one parameter is provided, and that it can be turned into a raw
20-byte SHA-1 that can be used to access the object database. If so, emit it to the
standard output; otherwise, error out.
If you want to make sure that the output actually names an object in your object
database and/or can be used as a specific type of object you require, you can add the
^{type} peeling operator to the parameter. For example, git rev-parse "$VAR^{commit}"
will make sure $VAR names an existing object that is a commit-ish (i.e. a commit, or
an annotated tag that points at a commit). To make sure that $VAR names an existing
object of any type, git rev-parse "$VAR^{object}" can be used.
Note that if you are verifying a name from an untrusted source, it is wise to use
--end-of-options so that the name argument is not mistaken for another option.
-q, --quiet
Only meaningful in --verify mode. Do not output an error message if the first argument
is not a valid object name; instead exit with non-zero status silently. SHA-1s for
valid object names are printed to stdout on success.
--sq
Usually the output is made one line per flag and parameter. This option makes output a
single line, properly quoted for consumption by shell. Useful when you expect your
parameter to contain whitespaces and newlines (e.g. when using pickaxe -S with git
diff-*). In contrast to the --sq-quote option, the command input is still interpreted
as usual.
--short[=<length>]
Same as --verify but shortens the object name to a unique prefix with at least length
characters. The minimum length is 4, the default is the effective value of the
core.abbrev configuration variable (see git-config(1)).
--not
When showing object names, prefix them with ^ and strip ^ prefix from the object names
that already have one.
--abbrev-ref[=(strict|loose)]
A non-ambiguous short name of the objects name. The option core.warnAmbiguousRefs is
used to select the strict abbreviation mode.
--symbolic
Usually the object names are output in SHA-1 form (with possible ^ prefix); this
option makes them output in a form as close to the original input as possible.
--symbolic-full-name
This is similar to --symbolic, but it omits input that are not refs (i.e. branch or
tag names; or more explicitly disambiguating "heads/master" form, when you want to
name the "master" branch when there is an unfortunately named tag "master"), and shows
them as full refnames (e.g. "refs/heads/master").
--output-object-format=(sha1|sha256|storage)
Allow oids to be input from any object format that the current repository supports.
Specifying "sha1" translates if necessary and returns a sha1 oid.
Specifying "sha256" translates if necessary and returns a sha256 oid.
Specifying "storage" translates if necessary and returns an oid in
encoded in the storage hash algorithm.
Options for Objects
--all
Show all refs found in refs/.
--branches[=<pattern>], --tags[=<pattern>], --remotes[=<pattern>]
Show all branches, tags, or remote-tracking branches, respectively (i.e., refs found
in refs/heads, refs/tags, or refs/remotes, respectively).
If a pattern is given, only refs matching the given shell glob are shown. If the
pattern does not contain a globbing character (?, *, or [), it is turned into a prefix
match by appending /*.
--glob=<pattern>
Show all refs matching the shell glob pattern pattern. If the pattern does not start
with refs/, this is automatically prepended. If the pattern does not contain a
globbing character (?, *, or [), it is turned into a prefix match by appending /*.
--exclude=<glob-pattern>
Do not include refs matching <glob-pattern> that the next --all, --branches, --tags,
--remotes, or --glob would otherwise consider. Repetitions of this option accumulate
exclusion patterns up to the next --all, --branches, --tags, --remotes, or --glob
option (other options or arguments do not clear accumulated patterns).
The patterns given should not begin with refs/heads, refs/tags, or refs/remotes when
applied to --branches, --tags, or --remotes, respectively, and they must begin with
refs/ when applied to --glob or --all. If a trailing /* is intended, it must be given
explicitly.
--exclude-hidden=(fetch|receive|uploadpack)
Do not include refs that would be hidden by git-fetch, git-receive-pack or
git-upload-pack by consulting the appropriate fetch.hideRefs, receive.hideRefs or
uploadpack.hideRefs configuration along with transfer.hideRefs (see git-config(1)).
This option affects the next pseudo-ref option --all or --glob and is cleared after
processing them.
--disambiguate=<prefix>
Show every object whose name begins with the given prefix. The <prefix> must be at
least 4 hexadecimal digits long to avoid listing each and every object in the
repository by mistake.
Options for Files
--local-env-vars
List the GIT_* environment variables that are local to the repository (e.g. GIT_DIR or
GIT_WORK_TREE, but not GIT_EDITOR). Only the names of the variables are listed, not
their value, even if they are set.
--path-format=(absolute|relative)
Controls the behavior of certain other options. If specified as absolute, the paths
printed by those options will be absolute and canonical. If specified as relative, the
paths will be relative to the current working directory if that is possible. The
default is option specific.
This option may be specified multiple times and affects only the arguments that follow
it on the command line, either to the end of the command line or the next instance of
this option.
The following options are modified by --path-format:
--git-dir
Show $GIT_DIR if defined. Otherwise show the path to the .git directory. The path
shown, when relative, is relative to the current working directory.
If $GIT_DIR is not defined and the current directory is not detected to lie in a Git
repository or work tree print a message to stderr and exit with nonzero status.
--git-common-dir
Show $GIT_COMMON_DIR if defined, else $GIT_DIR.
--resolve-git-dir <path>
Check if <path> is a valid repository or a gitfile that points at a valid repository,
and print the location of the repository. If <path> is a gitfile then the resolved
path to the real repository is printed.
--git-path <path>
Resolve "$GIT_DIR/<path>" and takes other path relocation variables such as
$GIT_OBJECT_DIRECTORY, $GIT_INDEX_FILE... into account. For example, if
$GIT_OBJECT_DIRECTORY is set to /foo/bar then "git rev-parse --git-path objects/abc"
returns /foo/bar/abc.
--show-toplevel
Show the (by default, absolute) path of the top-level directory of the working tree.
If there is no working tree, report an error.
--show-superproject-working-tree
Show the absolute path of the root of the superproject’s working tree (if exists) that
uses the current repository as its submodule. Outputs nothing if the current
repository is not used as a submodule by any project.
--shared-index-path
Show the path to the shared index file in split index mode, or empty if not in
split-index mode.
The following options are unaffected by --path-format:
--absolute-git-dir
Like --git-dir, but its output is always the canonicalized absolute path.
--is-inside-git-dir
When the current working directory is below the repository directory print "true",
otherwise "false".
--is-inside-work-tree
When the current working directory is inside the work tree of the repository print
"true", otherwise "false".
--is-bare-repository
When the repository is bare print "true", otherwise "false".
--is-shallow-repository
When the repository is shallow print "true", otherwise "false".
--show-cdup
When the command is invoked from a subdirectory, show the path of the top-level
directory relative to the current directory (typically a sequence of "../", or an
empty string).
--show-prefix
When the command is invoked from a subdirectory, show the path of the current
directory relative to the top-level directory.
--show-object-format[=(storage|input|output)]
Show the object format (hash algorithm) used for the repository for storage inside the
.git directory, input, or output. For input, multiple algorithms may be printed,
space-separated. If not specified, the default is "storage".
--show-ref-format
Show the reference storage format used for the repository.
Other Options
--since=<datestring>, --after=<datestring>
Parse the date string, and output the corresponding --max-age= parameter for git
rev-list.
--until=<datestring>, --before=<datestring>
Parse the date string, and output the corresponding --min-age= parameter for git
rev-list.
<arg>...
Flags and parameters to be parsed.
SPECIFYING REVISIONS
A revision parameter <rev> typically, but not necessarily, names a commit object. It uses
what is called an extended SHA-1 syntax. Here are various ways to spell object names. The
ones listed near the end of this list name trees and blobs contained in a commit.
Note
This document shows the "raw" syntax as seen by git. The shell and other UIs might
require additional quoting to protect special characters and to avoid word splitting.
<sha1>, e.g. dae86e1950b1277e545cee180551750029cfe735, dae86e
The full SHA-1 object name (40-byte hexadecimal string), or a leading substring that
is unique within the repository. E.g. dae86e1950b1277e545cee180551750029cfe735 and
dae86e both name the same commit object if there is no other object in your repository
whose object name starts with dae86e.
<describeOutput>, e.g. v1.7.4.2-679-g3bee7fb
Output from git describe; i.e. a closest tag, optionally followed by a dash and a
number of commits, followed by a dash, a g, and an abbreviated object name.
<refname>, e.g. master, heads/master, refs/heads/master
A symbolic ref name. E.g. master typically means the commit object referenced by
refs/heads/master. If you happen to have both heads/master and tags/master, you can
explicitly say heads/master to tell Git which one you mean. When ambiguous, a
<refname> is disambiguated by taking the first match in the following rules:
1. If $GIT_DIR/<refname> exists, that is what you mean (this is usually useful only
for HEAD, FETCH_HEAD, ORIG_HEAD, MERGE_HEAD, REBASE_HEAD, REVERT_HEAD,
CHERRY_PICK_HEAD, BISECT_HEAD and AUTO_MERGE);
2. otherwise, refs/<refname> if it exists;
3. otherwise, refs/tags/<refname> if it exists;
4. otherwise, refs/heads/<refname> if it exists;
5. otherwise, refs/remotes/<refname> if it exists;
6. otherwise, refs/remotes/<refname>/HEAD if it exists.
HEAD
names the commit on which you based the changes in the working tree.
FETCH_HEAD
records the branch which you fetched from a remote repository with your last git
fetch invocation.
ORIG_HEAD
is created by commands that move your HEAD in a drastic way (git am, git merge,
git rebase, git reset), to record the position of the HEAD before their operation,
so that you can easily change the tip of the branch back to the state before you
ran them.
MERGE_HEAD
records the commit(s) which you are merging into your branch when you run git
merge.
REBASE_HEAD
during a rebase, records the commit at which the operation is currently stopped,
either because of conflicts or an edit command in an interactive rebase.
REVERT_HEAD
records the commit which you are reverting when you run git revert.
CHERRY_PICK_HEAD
records the commit which you are cherry-picking when you run git cherry-pick.
BISECT_HEAD
records the current commit to be tested when you run git bisect --no-checkout.
AUTO_MERGE
records a tree object corresponding to the state the ort merge strategy wrote to
the working tree when a merge operation resulted in conflicts.
Note that any of the refs/* cases above may come either from the $GIT_DIR/refs
directory or from the $GIT_DIR/packed-refs file. While the ref name encoding is
unspecified, UTF-8 is preferred as some output processing may assume ref names in
UTF-8.
@
@ alone is a shortcut for HEAD.
[<refname>]@{<date>}, e.g. master@{yesterday}, HEAD@{5 minutes ago}
A ref followed by the suffix @ with a date specification enclosed in a brace pair
(e.g. {yesterday}, {1 month 2 weeks 3 days 1 hour 1 second ago} or {1979-02-26
18:30:00}) specifies the value of the ref at a prior point in time. This suffix may
only be used immediately following a ref name and the ref must have an existing log
($GIT_DIR/logs/<ref>). Note that this looks up the state of your local ref at a given
time; e.g., what was in your local master branch last week. If you want to look at
commits made during certain times, see --since and --until.
<refname>@{<n>}, e.g. master@{1}
A ref followed by the suffix @ with an ordinal specification enclosed in a brace pair
(e.g. {1}, {15}) specifies the n-th prior value of that ref. For example master@{1}
is the immediate prior value of master while master@{5} is the 5th prior value of
master. This suffix may only be used immediately following a ref name and the ref must
have an existing log ($GIT_DIR/logs/<refname>).
@{<n>}, e.g. @{1}
You can use the @ construct with an empty ref part to get at a reflog entry of the
current branch. For example, if you are on branch blabla then @{1} means the same as
blabla@{1}.
@{-<n>}, e.g. @{-1}
The construct @{-<n>} means the <n>th branch/commit checked out before the current
one.
[<branchname>]@{upstream}, e.g. master@{upstream}, @{u}
A branch B may be set up to build on top of a branch X (configured with
branch.<name>.merge) at a remote R (configured with the branch X taken from remote R,
typically found at refs/remotes/R/X.
[<branchname>]@{push}, e.g. master@{push}, @{push}
The suffix @{push} reports the branch "where we would push to" if git push were run
while branchname was checked out (or the current HEAD if no branchname is specified).
Like for @{upstream}, we report the remote-tracking branch that corresponds to that
branch at the remote.
Here’s an example to make it more clear:
$ git config push.default current
$ git config remote.pushdefault myfork
$ git switch -c mybranch origin/master
$ git rev-parse --symbolic-full-name @{upstream}
refs/remotes/origin/master
$ git rev-parse --symbolic-full-name @{push}
refs/remotes/myfork/mybranch
Note in the example that we set up a triangular workflow, where we pull from one
location and push to another. In a non-triangular workflow, @{push} is the same as
@{upstream}, and there is no need for it.
This suffix is also accepted when spelled in uppercase, and means the same thing no
matter the case.
<rev>^[<n>], e.g. HEAD^, v1.5.1^0
A suffix ^ to a revision parameter means the first parent of that commit object. ^<n>
means the <n>th parent (i.e. <rev>^ is equivalent to <rev>^1). As a special rule,
<rev>^0 means the commit itself and is used when <rev> is the object name of a tag
object that refers to a commit object.
<rev>~[<n>], e.g. HEAD~, master~3
A suffix ~ to a revision parameter means the first parent of that commit object. A
suffix ~<n> to a revision parameter means the commit object that is the <n>th
generation ancestor of the named commit object, following only the first parents. I.e.
<rev>~3 is equivalent to <rev>^^^ which is equivalent to <rev>^1^1^1. See below for an
illustration of the usage of this form.
<rev>^{<type>}, e.g. v0.99.8^{commit}
A suffix ^ followed by an object type name enclosed in brace pair means dereference
the object at <rev> recursively until an object of type <type> is found or the object
cannot be dereferenced anymore (in which case, barf). For example, if <rev> is a
commit-ish, <rev>^{commit} describes the corresponding commit object. Similarly, if
<rev> is a tree-ish, <rev>^{tree} describes the corresponding tree object. <rev>^0 is
a short-hand for <rev>^{commit}.
<rev>^{object} can be used to make sure <rev> names an object that exists, without
requiring <rev> to be a tag, and without dereferencing <rev>; because a tag is already
an object, it does not have to be dereferenced even once to get to an object.
<rev>^{tag} can be used to ensure that <rev> identifies an existing tag object.
<rev>^{}, e.g. v0.99.8^{}
A suffix ^ followed by an empty brace pair means the object could be a tag, and
dereference the tag recursively until a non-tag object is found.
<rev>^{/<text>}, e.g. HEAD^{/fix nasty bug}
A suffix ^ to a revision parameter, followed by a brace pair that contains a text led
by a slash, is the same as the :/fix nasty bug syntax below except that it returns the
youngest matching commit which is reachable from the <rev> before ^.
:/<text>, e.g. :/fix nasty bug
A colon, followed by a slash, followed by a text, names a commit whose commit message
matches the specified regular expression. This name returns the youngest matching
commit which is reachable from any ref, including HEAD. The regular expression can
match any part of the commit message. To match messages starting with a string, one
can use e.g. :/^foo. The special sequence :/! is reserved for modifiers to what is
matched. :/!-foo performs a negative match, while :/!!foo matches a literal !
character, followed by foo. Any other sequence beginning with :/! is reserved for
now. Depending on the given text, the shell’s word splitting rules might require
additional quoting.
<rev>:<path>, e.g. HEAD:README, master:./README
A suffix : followed by a path names the blob or tree at the given path in the tree-ish
object named by the part before the colon. A path starting with ./ or ../ is relative
to the current working directory. The given path will be converted to be relative to
the working tree’s root directory. This is most useful to address a blob or tree from
a commit or tree that has the same tree structure as the working tree.
:[<n>:]<path>, e.g. :0:README, :README
A colon, optionally followed by a stage number (0 to 3) and a colon, followed by a
path, names a blob object in the index at the given path. A missing stage number (and
the colon that follows it) names a stage 0 entry. During a merge, stage 1 is the
common ancestor, stage 2 is the target branch’s version (typically the current
branch), and stage 3 is the version from the branch which is being merged.
Here is an illustration, by Jon Loeliger. Both commit nodes B and C are parents of commit
node A. Parent commits are ordered left-to-right.
G H I J
\ / \ /
D E F
\ | / \
\ | / |
\|/ |
B C
\ /
\ /
A
A = = A^0
B = A^ = A^1 = A~1
C = = A^2
D = A^^ = A^1^1 = A~2
E = B^2 = A^^2
F = B^3 = A^^3
G = A^^^ = A^1^1^1 = A~3
H = D^2 = B^^2 = A^^^2 = A~2^2
I = F^ = B^3^ = A^^3^
J = F^2 = B^3^2 = A^^3^2
SPECIFYING RANGES
History traversing commands such as git log operate on a set of commits, not just a single
commit.
For these commands, specifying a single revision, using the notation described in the
previous section, means the set of commits reachable from the given commit.
Specifying several revisions means the set of commits reachable from any of the given
commits.
A commit’s reachable set is the commit itself and the commits in its ancestry chain.
There are several notations to specify a set of connected commits (called a "revision
range"), illustrated below.
Commit Exclusions
^<rev> (caret) Notation
To exclude commits reachable from a commit, a prefix ^ notation is used. E.g. ^r1 r2
means commits reachable from r2 but exclude the ones reachable from r1 (i.e. r1 and
its ancestors).
Dotted Range Notations
The .. (two-dot) Range Notation
The ^r1 r2 set operation appears so often that there is a shorthand for it. When you
have two commits r1 and r2 (named according to the syntax explained in SPECIFYING
REVISIONS above), you can ask for commits that are reachable from r2 excluding those
that are reachable from r1 by ^r1 r2 and it can be written as r1..r2.
The ... (three-dot) Symmetric Difference Notation
A similar notation r1...r2 is called symmetric difference of r1 and r2 and is defined
as r1 r2 --not $(git merge-base --all r1 r2). It is the set of commits that are
reachable from either one of r1 (left side) or r2 (right side) but not from both.
In these two shorthand notations, you can omit one end and let it default to HEAD. For
example, origin.. is a shorthand for origin..HEAD and asks "What did I do since I forked
from the origin branch?" Similarly, ..origin is a shorthand for HEAD..origin and asks
"What did the origin do since I forked from them?" Note that .. would mean HEAD..HEAD
which is an empty range that is both reachable and unreachable from HEAD.
Commands that are specifically designed to take two distinct ranges (e.g. "git range-diff
R1 R2" to compare two ranges) do exist, but they are exceptions. Unless otherwise noted,
all "git" commands that operate on a set of commits work on a single revision range. In
other words, writing two "two-dot range notation" next to each other, e.g.
$ git log A..B C..D
does not specify two revision ranges for most commands. Instead it will name a single
connected set of commits, i.e. those that are reachable from either B or D but are
reachable from neither A or C. In a linear history like this:
---A---B---o---o---C---D
because A and B are reachable from C, the revision range specified by these two dotted
ranges is a single commit D.
Other <rev>^ Parent Shorthand Notations
Three other shorthands exist, particularly useful for merge commits, for naming a set that
is formed by a commit and its parent commits.
The r1^@ notation means all parents of r1.
The r1^! notation includes commit r1 but excludes all of its parents. By itself, this
notation denotes the single commit r1.
The <rev>^-[<n>] notation includes <rev> but excludes the <n>th parent (i.e. a shorthand
for <rev>^<n>..<rev>), with <n> = 1 if not given. This is typically useful for merge
commits where you can just pass <commit>^- to get all the commits in the branch that was
merged in merge commit <commit> (including <commit> itself).
While <rev>^<n> was about specifying a single commit parent, these three notations also
consider its parents. For example you can say HEAD^2^@, however you cannot say HEAD^@^2.
REVISION RANGE SUMMARY
<rev>
Include commits that are reachable from <rev> (i.e. <rev> and its ancestors).
^<rev>
Exclude commits that are reachable from <rev> (i.e. <rev> and its ancestors).
<rev1>..<rev2>
Include commits that are reachable from <rev2> but exclude those that are reachable
from <rev1>. When either <rev1> or <rev2> is omitted, it defaults to HEAD.
<rev1>...<rev2>
Include commits that are reachable from either <rev1> or <rev2> but exclude those that
are reachable from both. When either <rev1> or <rev2> is omitted, it defaults to HEAD.
<rev>^@, e.g. HEAD^@
A suffix ^ followed by an at sign is the same as listing all parents of <rev>
(meaning, include anything reachable from its parents, but not the commit itself).
<rev>^!, e.g. HEAD^!
A suffix ^ followed by an exclamation mark is the same as giving commit <rev> and all
its parents prefixed with ^ to exclude them (and their ancestors).
<rev>^-<n>, e.g. HEAD^-, HEAD^-2
Equivalent to <rev>^<n>..<rev>, with <n> = 1 if not given.
Here are a handful of examples using the Loeliger illustration above, with each step in
the notation’s expansion and selection carefully spelt out:
Args Expanded arguments Selected commits
D G H D
D F G H I J D F
^G D H D
^D B E I J F B
^D B C E I J F B C
C I J F C
B..C = ^B C C
B...C = B ^F C G H D E B C
B^- = B^..B
= ^B^1 B E I J F B
C^@ = C^1
= F I J F
B^@ = B^1 B^2 B^3
= D E F D G H E F I J
C^! = C ^C^@
= C ^C^1
= C ^F C
B^! = B ^B^@
= B ^B^1 ^B^2 ^B^3
= B ^D ^E ^F B
F^! D = F ^I ^J D G H D F
PARSEOPT
In --parseopt mode, git rev-parse helps massaging options to bring to shell scripts the
same facilities C builtins have. It works as an option normalizer (e.g. splits single
switches aggregate values), a bit like getopt(1) does.
It takes on the standard input the specification of the options to parse and understand,
and echoes on the standard output a string suitable for sh(1) eval to replace the
arguments with normalized ones. In case of error, it outputs usage on the standard error
stream, and exits with code 129.
Note: Make sure you quote the result when passing it to eval. See below for an example.
Input Format
git rev-parse --parseopt input format is fully text based. It has two parts, separated by
a line that contains only --. The lines before the separator (should be one or more) are
used for the usage. The lines after the separator describe the options.
Each line of options has this format:
<opt-spec><flags>*<arg-hint>? SP+ help LF
<opt-spec>
its format is the short option character, then the long option name separated by a
comma. Both parts are not required, though at least one is necessary. May not contain
any of the <flags> characters. h,help, dry-run and f are examples of correct
<opt-spec>.
<flags>
<flags> are of *, =, ? or !.
• Use = if the option takes an argument.
• Use ? to mean that the option takes an optional argument. You probably want to
use the --stuck-long mode to be able to unambiguously parse the optional argument.
• Use * to mean that this option should not be listed in the usage generated for the
-h argument. It’s shown for --help-all as documented in gitcli(7).
• Use ! to not make the corresponding negated long option available.
<arg-hint>
<arg-hint>, if specified, is used as a name of the argument in the help output, for
options that take arguments. <arg-hint> is terminated by the first whitespace. It is
customary to use a dash to separate words in a multi-word argument hint.
The remainder of the line, after stripping the spaces, is used as the help associated with
the option.
Blank lines are ignored, and lines that don’t match this specification are used as option
group headers (start the line with a space to create such lines on purpose).
Example
OPTS_SPEC="\
some-command [<options>] <args>...
some-command does foo and bar!
--
h,help! show the help
foo some nifty option --foo
bar= some cool option --bar with an argument
baz=arg another cool option --baz with a named argument
qux?path qux may take a path argument but has meaning by itself
An option group Header
C? option C with an optional argument"
eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
Usage text
When "$@" is -h or --help in the above example, the following usage text would be shown:
usage: some-command [<options>] <args>...
some-command does foo and bar!
-h, --help show the help
--[no-]foo some nifty option --foo
--[no-]bar ... some cool option --bar with an argument
--[no-]baz <arg> another cool option --baz with a named argument
--[no-]qux[=<path>] qux may take a path argument but has meaning by itself
An option group Header
-C[...] option C with an optional argument
SQ-QUOTE
In --sq-quote mode, git rev-parse echoes on the standard output a single line suitable for
sh(1) eval. This line is made by normalizing the arguments following --sq-quote. Nothing
other than quoting the arguments is done.
If you want command input to still be interpreted as usual by git rev-parse before the
output is shell quoted, see the --sq option.
Example
$ cat >your-git-script.sh <<\EOF
#!/bin/sh
args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments
command="git frotz -n24 $args" # and use it inside a handcrafted
# command line
eval "$command"
EOF
$ sh your-git-script.sh "a b'c"
EXAMPLES
• Print the object name of the current commit:
$ git rev-parse --verify HEAD
• Print the commit object name from the revision in the $REV shell variable:
$ git rev-parse --verify --end-of-options $REV^{commit}
This will error out if $REV is empty or not a valid revision.
• Similar to above:
$ git rev-parse --default master --verify --end-of-options $REV
but if $REV is empty, the commit object name from master will be printed.
GIT
Part of the git(1) suite