oracular (1) hackrf_sweep.1.gz

NAME

       hackrf_sweep - control frequency sweep of hackrf

DESCRIPTION

       hackrf_sweep Usage:

              [-h]  #  this  help  [-d  serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF
              amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz  [-p
              antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB,
              8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples]  #  Number  of
              samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz
              [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] #  binary  output  [-I]  #
              binary inverse FFT output -r filename # output file

   Output fields:
              date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .

   Usage:
              [-h]  #  this  help  [-d  serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF
              amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz  [-p
              antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB,
              8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples]  #  Number  of
              samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz
              [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] #  binary  output  [-I]  #
              binary inverse FFT output -r filename # output file

   Output fields:
              date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .

SEE ALSO

       The primary source of documentation is the wiki on github:

       https://github.com/mossmann/hackrf/wiki