Provided by: slurm-client_24.05.2-1_amd64 
NAME
squeue - view information about jobs located in the Slurm scheduling queue.
SYNOPSIS
squeue [OPTIONS...]
DESCRIPTION
squeue is used to view job and job step information for jobs managed by Slurm.
OPTIONS
-A, --account=<account_list>
Specify the accounts of the jobs to view. Accepts a comma separated list of account names. This
has no effect when listing job steps.
-a, --all
Display information about jobs and job steps in all partitions. This causes information to be
displayed about partitions that are configured as hidden, partitions that are unavailable to a
user's group, and federated jobs that are in a "revoked" state.
-r, --array
Display one job array element per line. Without this option, the display will be optimized for
use with job arrays (pending job array elements will be combined on one line of output with the
array index values printed using a regular expression).
-M, --clusters=<cluster_name>
Clusters to issue commands to. Multiple cluster names may be comma separated. A value of 'all'
will query to run on all clusters. Note that the slurmdbd must be up for this option to work
properly, unless running in a federation with either FederationParameters=fed_display configured
or the --federation option set. This option implicitly sets the --local option.
--expand-patterns
Expand any filename patterns from in StdOut, StdErr and StdIn. Fields that map to a range of
values will use the first value of the range. For example "%t" for task id will be replaced by
"0".
--federation
Show jobs from the federation if a member of one.
-o, --format=<output_format>
Specify the information to be displayed, its size and position (right or left justified). Also
see the -O, --Format=<output_format> option described below (which supports less flexibility in
formatting, but supports access to all fields). If the command is executed in a federated cluster
environment and information about more than one cluster is to be displayed and the -h, --noheader
option is used, then the cluster name will be displayed before the default output formats shown
below.
The default formats with various options are:
default "%.18i %.9P %.8j %.8u %.2t %.10M %.6D %R"
-l, --long "%.18i %.9P %.8j %.8u %.8T %.10M %.9l %.6D %R"
-s, --steps "%.15i %.8j %.9P %.8u %.9M %N"
The format of each field is "%[[.]size]type[suffix]"
size Minimum field size. If no size is specified, whatever is needed to print the information
will be used.
. Indicates the output should be right justified and size must be specified. By default
output is left justified.
suffix Arbitrary string to append to the end of the field.
Note that many of these type specifications are valid only for jobs while others are valid only for job
steps. Valid type specifications include:
%all Print all fields available for this data type with a vertical bar separating each field.
%a Account associated with the job. (Valid for jobs only)
%A Number of tasks created by a job step. This reports the value of the srun --ntasks option.
(Valid for job steps only)
%A Job id. This will have a unique value for each element of job arrays. (Valid for jobs
only)
%B Executing (batch) host. For an allocated session, this is the host on which the session is
executing (i.e. the node from which the srun or the salloc command was executed). For a
batch job, this is the node executing the batch script. In the case of a typical Linux
cluster, this would be the compute node zero of the allocation.
%c Minimum number of CPUs (processors) per node requested by the job. This reports the value
of the srun --mincpus option with a default value of zero. (Valid for jobs only)
%C Number of CPUs (processors) requested by the job or allocated to it if already running. As a
job is completing this number will reflect the current number of CPUs allocated. (Valid for
jobs only)
%d Minimum size of temporary disk space (in MB) requested by the job. (Valid for jobs only)
%D Number of nodes allocated to the job or the minimum number of nodes required by a pending
job. The actual number of nodes allocated to a pending job may exceed this number if the job
specified a node range count (e.g. minimum and maximum node counts) or the job specifies a
processor count instead of a node count. As a job is completing this number will reflect the
current number of nodes allocated. (Valid for jobs only)
%e Time at which the job ended or is expected to end (based upon its time limit). (Valid for
jobs only)
%E Job dependencies remaining. This job will not begin execution until these dependent jobs
complete. In the case of a job that can not run due to job dependencies never being
satisfied, the full original job dependency specification will be reported. A value of NULL
implies this job has no dependencies. (Valid for jobs only)
%f Features required by the job. (Valid for jobs only)
%F Job array's job ID. This is the base job ID. For non-array jobs, this is the job ID.
(Valid for jobs only)
%g Group name of the job. (Valid for jobs only)
%G Group ID of the job. (Valid for jobs only)
%h Can the compute resources allocated to the job be over subscribed by other jobs. The
resources to be over subscribed can be nodes, sockets, cores, or hyperthreads depending upon
configuration. The value will be "YES" if the job was submitted with the oversubscribe
option or the partition is configured with OverSubscribe=Force, "NO" if the job requires
exclusive node access, "USER" if the allocated compute nodes are dedicated to a single user,
"MCS" if the allocated compute nodes are dedicated to a single security class (See MCSPlugin
and MCSParameters configuration parameters for more information), "OK" otherwise (typically
allocated dedicated CPUs), (Valid for jobs only)
%H Number of sockets per node requested by the job. This reports the value of the srun
--sockets-per-node option. When --sockets-per-node has not been set, "*" is displayed.
(Valid for jobs only)
%i Job or job step id. In the case of job arrays, the job ID format will be of the form
"<base_job_id>_<index>". By default, the job array index field size will be limited to 64
bytes. Use the environment variable SLURM_BITSTR_LEN to specify larger field sizes. (Valid
for jobs and job steps) In the case of heterogeneous job allocations, the job ID format will
be of the form "#+#" where the first number is the "heterogeneous job leader" and the second
number the zero origin offset for each component of the job.
%I Number of cores per socket requested by the job. This reports the value of the srun
--cores-per-socket option. When --cores-per-socket has not been set, "*" is displayed.
(Valid for jobs only)
%j Job or job step name. (Valid for jobs and job steps)
%J Number of threads per core requested by the job. This reports the value of the srun
--threads-per-core option. When --threads-per-core has not been set, "*" is displayed.
(Valid for jobs only)
%k Comment associated with the job. (Valid for jobs only)
%K Job array index. By default, this field size will be limited to 64 bytes. Use the
environment variable SLURM_BITSTR_LEN to specify larger field sizes. (Valid for jobs only)
%l Time limit of the job or job step in days-hours:minutes:seconds. The value may be "NOT_SET"
if not yet established or "UNLIMITED" for no limit. (Valid for jobs and job steps)
%L Time left for the job to execute in days-hours:minutes:seconds. This value is calculated by
subtracting the job's time used from its time limit. The value may be "NOT_SET" if not yet
established or "UNLIMITED" for no limit. (Valid for jobs only)
%m Minimum size of memory (in MB) requested by the job. (Valid for jobs only)
%M Time used by the job or job step in days-hours:minutes:seconds. The days and hours are
printed only as needed. For job steps this field shows the elapsed time since execution
began and thus will be inaccurate for job steps which have been suspended. Clock skew
between nodes in the cluster will cause the time to be inaccurate. If the time is obviously
wrong (e.g. negative), it displays as "INVALID". (Valid for jobs and job steps)
%n List of node names explicitly requested by the job. (Valid for jobs only)
%N List of nodes allocated to the job or job step. In the case of a COMPLETING job, the list of
nodes will comprise only those nodes that have not yet been returned to service. (Valid for
jobs and job steps)
%o The command to be executed.
%O Are contiguous nodes requested by the job. (Valid for jobs only)
%p Priority of the job (converted to a floating point number between 0.0 and 1.0). Also see
%Q. (Valid for jobs only)
%P Partition of the job or job step. (Valid for jobs and job steps)
%q Quality of service associated with the job. (Valid for jobs only)
%Q Priority of the job (generally a very large unsigned integer). Also see %p. (Valid for
jobs only)
%r The reason a job is in its current state. See the JOB REASON CODES section below for more
information. (Valid for jobs only)
%R For pending jobs: the reason a job has not been started by the scheduler is printed within
parenthesis. For terminated jobs with failure: an explanation as to why the job failed is
printed within parenthesis. For all other job states: the list of allocate nodes. See the
JOB REASON CODES section below for more information. (Valid for jobs only)
%S Actual or expected start time of the job or job step. (Valid for jobs and job steps)
%t Job state in compact form. See the JOB STATE CODES section below for a list of possible
states. (Valid for jobs only)
%T Job state in extended form. See the JOB STATE CODES section below for a list of possible
states. (Valid for jobs only)
%u User name for a job or job step. (Valid for jobs and job steps)
%U User ID for a job or job step. (Valid for jobs and job steps)
%v Reservation for the job. (Valid for jobs only)
%V The job's submission time.
%w Workload Characterization Key (wckey). (Valid for jobs only)
%W Licenses reserved for the job. (Valid for jobs only)
%x List of node names explicitly excluded by the job. (Valid for jobs only)
%X Count of cores reserved on each node for system use (core specialization). (Valid for jobs
only)
%y Nice value (adjustment to a job's scheduling priority). (Valid for jobs only)
%Y For pending jobs, a list of the nodes expected to be used when the job is started.
%z Number of requested sockets, cores, and threads (S:C:T) per node for the job. When (S:C:T)
has not been set, "*" is displayed. (Valid for jobs only)
%Z The job's working directory.
-O, --Format=<output_format>
Specify the information to be displayed. Also see the -o, --format=<output_format> option
described above (which supports greater flexibility in formatting, but does not support access to
all fields because we ran out of letters). Requests a comma separated list of job information to
be displayed.
The format of each field is "type[:[.][size][suffix]]"
size Minimum field size. If no size is specified, 20 characters will be allocated to print
the information.
. Indicates the output should be right justified and size must be specified. By default
output is left justified.
suffix Arbitrary string to append to the end of the field.
Note that many of these type specifications are valid only for jobs while others are valid only for job
steps. Valid type specifications include:
Account
Print the account associated with the job. (Valid for jobs only)
AccrueTime
Print the accrue time associated with the job. (Valid for jobs only)
admin_comment
Administrator comment associated with the job. (Valid for jobs only)
AllocNodes
Print the nodes allocated to the job. (Valid for jobs only)
AllocSID
Print the session ID used to submit the job. (Valid for jobs only)
ArrayJobID
Prints the job ID of the job array. (Valid for jobs and job steps)
ArrayTaskID
Prints the task ID of the job array. (Valid for jobs and job steps)
AssocID
Prints the ID of the job association. (Valid for jobs only)
BatchFlag
Prints whether the batch flag has been set. (Valid for jobs only)
BatchHost
Executing (batch) host. For an allocated session, this is the host on which the session is
executing (i.e. the node from which the srun or the salloc command was executed). For a
batch job, this is the node executing the batch script. In the case of a typical Linux
cluster, this would be the compute node zero of the allocation. (Valid for jobs only)
BoardsPerNode
Prints the number of boards per node allocated to the job. (Valid for jobs only)
BurstBuffer
Burst Buffer specification (Valid for jobs only)
BurstBufferState
Burst Buffer state (Valid for jobs only)
Cluster
Name of the cluster that is running the job or job step.
ClusterFeature
Cluster features required by the job. (Valid for jobs only)
Command
The command to be executed. (Valid for jobs only)
Comment
Comment associated with the job. (Valid for jobs only)
Contiguous
Are contiguous nodes requested by the job. (Valid for jobs only)
Container
OCI container bundle path.
ContainerID
OCI container assigned ID.
Cores Number of cores per socket requested by the job. This reports the value of the srun
--cores-per-socket option. When --cores-per-socket has not been set, "*" is displayed.
(Valid for jobs only)
CoreSpec
Count of cores reserved on each node for system use (core specialization). (Valid for jobs
only)
CPUFreq
Prints the frequency of the allocated CPUs. (Valid for job steps only)
cpus-per-task
Prints the number of CPUs per tasks allocated to the job. (Valid for jobs only)
cpus-per-tres
Print the memory required per trackable resources allocated to the job or job step.
Deadline
Prints the deadline affected to the job (Valid for jobs only)
DelayBoot
Delay boot time. (Valid for jobs only)
Dependency
Job dependencies remaining. This job will not begin execution until these dependent jobs
complete. In the case of a job that can not run due to job dependencies never being
satisfied, the full original job dependency specification will be reported. A value of NULL
implies this job has no dependencies. (Valid for jobs only)
DerivedEC
The highest exit code returned by the job's job steps (srun invocations). Following the
colon is the signal that caused the process to terminate if it was terminated by a signal.
(Valid for jobs only)
EligibleTime
Time the job is eligible for running. (Valid for jobs only)
EndTime
The time of job termination, actual or expected. (Valid for jobs only)
ExcNodes
The nodes requested to be excluded when allocating this job. (Valid for jobs only)
exit_code
The exit code returned by the job, typically as set by the exit() function. Following the
colon is the signal that caused the process to terminate if it was terminated by a signal.
(Valid for jobs only)
Feature
Features required by the job. (Valid for jobs only)
GroupID
Group ID of the job. (Valid for jobs only)
GroupName
Group name of the job. (Valid for jobs only)
HetJobID
Job ID of the heterogeneous job leader.
HetJobIDSet
Expression identifying all components job IDs within a heterogeneous job.
HetJobOffset
Zero origin offset within a collection of heterogeneous job components.
JobArrayID
Job array's job ID. This is the base job ID. For non-array jobs, this is the job ID.
(Valid for jobs only)
JobID Job ID. This will have a unique value for each element of job arrays and each component of
heterogeneous jobs. (Valid for jobs only)
LastSchedEval
Prints the last time the job was evaluated for scheduling. (Valid for jobs only)
Licenses
Licenses reserved for the job. (Valid for jobs only)
MaxCPUs
Prints the max number of CPUs allocated to the job. (Valid for jobs only)
MaxNodes
Prints the max number of nodes allocated to the job. (Valid for jobs only)
MCSLabel
Prints the MCS_label of the job. (Valid for jobs only)
mem-per-tres
Print the memory (in MB) required per trackable resources allocated to the job or job step.
MinCpus
Minimum number of CPUs (processors) per node requested by the job. This reports the value
of the srun --mincpus option with a default value of zero. (Valid for jobs only)
MinMemory
Minimum size of memory (in MB) requested by the job. (Valid for jobs only)
MinTime
Minimum time limit of the job (Valid for jobs only)
MinTmpDisk
Minimum size of temporary disk space (in MB) requested by the job. (Valid for jobs only)
Name Job or job step name. (Valid for jobs and job steps)
Network
The network that the job is running on. (Valid for jobs and job steps)
Nice Nice value (adjustment to a job's scheduling priority). (Valid for jobs only)
NodeList
List of nodes allocated to the job or job step. In the case of a COMPLETING job, the list
of nodes will comprise only those nodes that have not yet been returned to service. (Valid
for jobs only)
Nodes List of nodes allocated to the job or job step. In the case of a COMPLETING job, the list
of nodes will comprise only those nodes that have not yet been returned to service. (Valid
job steps only)
NTPerBoard
The number of tasks per board allocated to the job. (Valid for jobs only)
NTPerCore
The number of tasks per core allocated to the job. (Valid for jobs only)
NTPerNode
The number of tasks per node allocated to the job. (Valid for jobs only)
NTPerSocket
The number of tasks per socket allocated to the job. (Valid for jobs only)
NumCPUs
Number of CPUs (processors) requested by the job or allocated to it if already running. As
a job is completing, this number will reflect the current number of CPUs allocated. (Valid
for jobs and job steps)
NumNodes
Number of nodes allocated to the job or the minimum number of nodes required by a pending
job. The actual number of nodes allocated to a pending job may exceed this number if the
job specified a node range count (e.g. minimum and maximum node counts) or the job
specifies a processor count instead of a node count. As a job is completing this number
will reflect the current number of nodes allocated. (Valid for jobs only)
NumTasks
Number of tasks requested by a job or job step. This reports the value of the --ntasks
option. (Valid for jobs and job steps)
Origin Cluster name where federated job originated from. (Valid for federated jobs only)
OriginRaw
Cluster ID where federated job originated from. (Valid for federated jobs only)
OverSubscribe
Can the compute resources allocated to the job be over subscribed by other jobs. The
resources to be over subscribed can be nodes, sockets, cores, or hyperthreads depending
upon configuration. The value will be "YES" if the job was submitted with the
oversubscribe option or the partition is configured with OverSubscribe=Force, "NO" if the
job requires exclusive node access, "USER" if the allocated compute nodes are dedicated to
a single user, "MCS" if the allocated compute nodes are dedicated to a single security
class (See MCSPlugin and MCSParameters configuration parameters for more information), "OK"
otherwise (typically allocated dedicated CPUs), (Valid for jobs only)
Partition
Partition of the job or job step. (Valid for jobs and job steps)
PendingTime
The time (in seconds) between start time and submit time of the job. If the job has not
started yet, then the time (in seconds) between now and the submit time of the job. (Valid
for jobs only)
PreemptTime
The preempt time for the job. (Valid for jobs only)
Prefer The preferred features of a pending job. (Valid for jobs only)
Priority
Priority of the job (converted to a floating point number between 0.0 and 1.0). Also see
prioritylong. (Valid for jobs only)
PriorityLong
Priority of the job (generally a very large unsigned integer). Also see priority. (Valid
for jobs only)
Profile
Profile of the job. (Valid for jobs only)
QOS Quality of service associated with the job. (Valid for jobs only)
Reason The reason a job is in its current state. See the JOB REASON CODES section below for more
information. (Valid for jobs only)
ReasonList
For pending jobs: the reason a job is waiting for execution is printed within parenthesis.
For terminated jobs with failure: an explanation as to why the job failed is printed within
parenthesis. For all other job states: the list of allocate nodes. See the JOB REASON
CODES section below for more information. (Valid for jobs only)
Reboot Indicates if the allocated nodes should be rebooted before starting the job. (Valid on
jobs only)
ReqNodes
List of node names explicitly requested by the job. (Valid for jobs only)
ReqSwitch
The max number of requested switches by for the job. (Valid for jobs only)
Requeue
Prints whether the job will be requeued on failure. (Valid for jobs only)
Reservation
Reservation for the job. (Valid for jobs only)
ResizeTime
The amount of time changed for the job to run. (Valid for jobs only)
RestartCnt
The number of restarts for the job. (Valid for jobs only)
ResvPort
Reserved ports of the job. (Valid for job steps only)
SchedNodes
For pending jobs, a list of the nodes expected to be used when the job is started. (Valid
for jobs only)
SCT Number of requested sockets, cores, and threads (S:C:T) per node for the job. When (S:C:T)
has not been set, "*" is displayed. (Valid for jobs only)
SiblingsActive
Cluster names of where federated sibling jobs exist. (Valid for federated jobs only)
SiblingsActiveRaw
Cluster IDs of where federated sibling jobs exist. (Valid for federated jobs only)
SiblingsViable
Cluster names of where federated sibling jobs are viable to run. (Valid for federated jobs
only)
SiblingsViableRaw
Cluster IDs of where federated sibling jobs viable to run. (Valid for federated jobs only)
Sockets
Number of sockets per node requested by the job. This reports the value of the srun
--sockets-per-node option. When --sockets-per-node has not been set, "*" is displayed.
(Valid for jobs only)
SPerBoard
Number of sockets per board allocated to the job. (Valid for jobs only)
StartTime
Actual or expected start time of the job or job step. (Valid for jobs and job steps)
State Job state in extended form. See the JOB STATE CODES section below for a list of possible
states. (Valid for jobs only)
StateCompact
Job state in compact form. See the JOB STATE CODES section below for a list of possible
states. (Valid for jobs only)
STDERR The directory for standard error to output to. (Valid for jobs only)
STDIN The directory for standard in. (Valid for jobs only)
STDOUT The directory for standard out to output to. (Valid for jobs only)
StepID Job or job step ID. In the case of job arrays, the job ID format will be of the form
"<base_job_id>_<index>". (Valid for job steps only)
StepName
Job step name. (Valid for job steps only)
StepState
The state of the job step. (Valid for job steps only)
SubmitTime
The time that the job was submitted at. (Valid for jobs only)
system_comment
System comment associated with the job. (Valid for jobs only)
Threads
Number of threads per core requested by the job. This reports the value of the srun
--threads-per-core option. When --threads-per-core has not been set, "*" is displayed.
(Valid for jobs only)
TimeLeft
Time left for the job to execute in days-hours:minutes:seconds. This value is calculated
by subtracting the job's time used from its time limit. The value may be "NOT_SET" if not
yet established or "UNLIMITED" for no limit. (Valid for jobs only)
TimeLimit
Timelimit for the job or job step. (Valid for jobs and job steps)
TimeUsed
Time used by the job or job step in days-hours:minutes:seconds. The days and hours are
printed only as needed. For job steps this field shows the elapsed time since execution
began and thus will be inaccurate for job steps which have been suspended. Clock skew
between nodes in the cluster will cause the time to be inaccurate. If the time is
obviously wrong (e.g. negative), it displays as "INVALID". (Valid for jobs and job steps)
tres-alloc
Print the trackable resources allocated to the job if running. If not running, then print
the trackable resources requested by the job.
tres-bind
Print the trackable resources task binding requested by the job or job step.
tres-freq
Print the trackable resources frequencies requested by the job or job step.
tres-per-job
Print the trackable resources requested by the job.
tres-per-node
Print the trackable resources per node requested by the job or job step.
tres-per-socket
Print the trackable resources per socket requested by the job or job step.
tres-per-step
Print the trackable resources requested by the job step.
tres-per-task
Print the trackable resources per task requested by the job or job step.
UserID User ID for a job or job step. (Valid for jobs and job steps)
UserName
User name for a job or job step. (Valid for jobs and job steps)
Wait4Switch
The amount of time to wait for the desired number of switches. (Valid for jobs only)
WCKey Workload Characterization Key (wckey). (Valid for jobs only)
WorkDir
The job's working directory. (Valid for jobs only)
--help Print a help message describing all options squeue.
--hide Do not display information about jobs and job steps in all partitions. By default, information
about partitions that are configured as hidden or are not available to the user's group will not
be displayed (i.e. this is the default behavior).
-i, --iterate=<seconds>
Repeatedly gather and report the requested information at the interval specified (in seconds). By
default, prints a time stamp with the header.
-j, --jobs[=<job_id_list>]
Specify a comma separated list of job IDs to display. Defaults to all jobs. The
--jobs=<job_id_list> option may be used in conjunction with the --steps option to print step
information about specific jobs. Note: If a list of job IDs is provided, the jobs are displayed
even if they are on hidden partitions. Since this option's argument is optional, for proper
parsing the single letter option must be followed immediately with the value and not include a
space between them. For example "-j1008" and not "-j 1008". The job ID format is
"job_id[_array_id]". Performance of the command can be measurably improved for systems with large
numbers of jobs when a single job ID is specified. By default, this field size will be limited to
64 bytes. Use the environment variable SLURM_BITSTR_LEN to specify larger field sizes.
--json, --json=list, --json=<data_parser>
Dump information as JSON using the default data_parser plugin or explicit data_parser with
parameters. All information is dumped, even if it would normally not be. Sorting and formatting
arguments passed to other options are ignored; however, filtering arguments are still used.
-L, --licenses=<license_list>
Request jobs requesting or using one or more of the named licenses. The license list consists of
a comma separated list of license names.
--local
Show only jobs local to this cluster. Ignore other clusters in this federation (if any). Overrides
--federation.
-l, --long
Report more of the available information for the selected jobs or job steps, subject to any
constraints specified.
--me Equivalent to --user=<my username>.
-n, --name=<name_list>
Request jobs or job steps having one of the specified names. The list consists of a comma
separated list of job names.
--noconvert
Don't convert units from their original type (e.g. 2048M won't be converted to 2G).
-w, --nodelist=<hostlist>
Report only on jobs allocated to the specified node or list of nodes. This may either be the
NodeName or NodeHostname as defined in slurm.conf(5) in the event that they differ. A node_name
of localhost is mapped to the current host name.
-h, --noheader
Do not print a header on the output.
--notme
Opposite of --me; only display jobs that are not from the invoking user.
--only-job-state
Only query for the job state. Query utilizes RPC that only retains JobID and State information,
reducing work required by slurmctld to respond.
-p, --partition=<part_list>
Specify the partitions of the jobs or steps to view. Accepts a comma separated list of partition
names.
-P, --priority
For pending jobs submitted to multiple partitions, list the job once per partition. In addition,
if jobs are sorted by priority, consider both the partition and job priority. This option can be
used to produce a list of pending jobs in the same order considered for scheduling by Slurm with
appropriate additional options (e.g. "--sort=-p,i --states=PD").
-q, --qos=<qos_list>
Specify the qos(s) of the jobs or steps to view. Accepts a comma separated list of qos's.
-R, --reservation=<reservation_name>
Specify the reservation of the jobs to view.
--sibling
Show all sibling jobs on a federated cluster. Implies --federation.
-S, --sort=<sort_list>
Specification of the order in which records should be reported. This uses the same field
specification as the <output_format>. The long format option "cluster" can also be used to sort
jobs or job steps by cluster name (e.g. federated jobs). Multiple sorts may be performed by
listing multiple sort fields separated by commas. The field specifications may be preceded by "+"
or "-" for ascending (default) and descending order respectively. For example, a sort value of
"P,U" will sort the records by partition name then by user id. The default value of sort for jobs
is "P,t,-p" (increasing partition name then within a given partition by increasing job state and
then decreasing priority). The default value of sort for job steps is "P,i" (increasing partition
name then within a given partition by increasing step id).
--start
Report the expected start time and resources to be allocated for pending jobs in order of
increasing start time. This is equivalent to the following options: --format="%.18i %.9P %.8j
%.8u %.2t %.19S %.6D %20Y %R", --sort=S and --states=PENDING. Any of these options may be
explicitly changed as desired by combining the --start option with other option values (e.g. to
use a different output format). The expected start time of pending jobs is only available if the
Slurm is configured to use the backfill scheduling plugin.
-t, --states=<state_list>
Specify the states of jobs to view. Accepts a comma separated list of state names or "all". If
"all" is specified then jobs of all states will be reported. If no state is specified then
pending, running, and completing jobs are reported. See the JOB STATE CODES section below for a
list of valid states. Both extended and compact forms are valid. Note the <state_list> supplied
is case insensitive ("pd" and "PD" are equivalent).
-s, --steps[=<step_list>]
Specify the job steps to view. This flag indicates that a comma separated list of job steps to
view follows without an equal sign (see examples). The job step format is
"job_id[_array_id].step_id". Defaults to all job steps. Since this option's argument is optional,
for proper parsing the single letter option must be followed immediately with the value and not
include a space between them. For example "-s1008.0" and not "-s 1008.0".
--usage
Print a brief help message listing the squeue options.
-u, --user=<user_list>
Request jobs or job steps from a comma separated list of users. The list can consist of user
names or user id numbers. Performance of the command can be measurably improved for systems with
large numbers of jobs when a single user is specified.
-v, --verbose
Report details of squeues actions.
-V , --version
Print version information and exit.
--yaml, --yaml=list, --yaml=<data_parser>
Dump information as YAML using the default data_parser plugin or explicit data_parser with
parameters. All information is dumped, even if it would normally not be. Sorting and formatting
arguments passed to other options are ignored; however, filtering arguments are still used.
JOB REASON CODES
These codes identify the reason that a job has not been started by the scheduler. There may be multiple
reasons why a job cannot start yet, in which case only the reason that was encountered by the attempted
scheduling method will be displayed.
The Reasons listed below are some of the more common ones you might see. For a full list of Reason codes
refer to this page page: <https://slurm.schedmd.com/job_reason_codes.html>
AssocGrp*Limit The job's association has reached an aggregate limit on some resource.
AssociationJobLimit The job's association has reached its maximum job count.
AssocMax*Limit The job requests a resource that violates a per-job limit on the requested
association.
AssociationResourceLimit
The job's association has reached some resource limit.
AssociationTimeLimit The job's association has reached its time limit.
BadConstraints The job's constraints can not be satisfied.
BeginTime The job's earliest start time has not yet been reached.
Cleaning The job is being requeued and still cleaning up from its previous execution.
Dependency This job has a dependency on another job that has not been satisfied.
DependencyNeverSatisfied
This job has a dependency on another job that will never be satisfied.
FrontEndDown No front end node is available to execute this job.
InactiveLimit The job reached the system InactiveLimit.
InvalidAccount The job's account is invalid.
InvalidQOS The job's QOS is invalid.
JobHeldAdmin The job is held by a system administrator.
JobHeldUser The job is held by the user.
JobLaunchFailure The job could not be launched. This may be due to a file system problem, invalid
program name, etc.
Licenses The job is waiting for a license.
NodeDown A node required by the job is down.
NonZeroExitCode The job terminated with a non-zero exit code.
PartitionDown The partition required by this job is in a DOWN state.
PartitionInactive The partition required by this job is in an Inactive state and not able to start
jobs.
PartitionNodeLimit The number of nodes required by this job is outside of its partition's current
limits. Can also indicate that required nodes are DOWN or DRAINED.
PartitionTimeLimit The job's time limit exceeds its partition's current time limit.
Priority One or more higher priority jobs exist for this partition or advanced reservation.
Prolog Its PrologSlurmctld program is still running.
QOSGrp*Limit The job's QOS has reached an aggregate limit on some resource.
QOSJobLimit The job's QOS has reached its maximum job count.
QOSMax*Limit The job requests a resource that violates a per-job limit on the requested QOS.
QOSResourceLimit The job's QOS has reached some resource limit.
QOSTimeLimit The job's QOS has reached its time limit.
QOSUsageThreshold Required QOS threshold has been breached.
ReqNodeNotAvail Some node specifically required by the job is not currently available. The node
may currently be in use, reserved for another job, in an advanced reservation,
DOWN, DRAINED, or not responding. Nodes which are DOWN, DRAINED, or not responding
will be identified as part of the job's "reason" field as "UnavailableNodes". Such
nodes will typically require the intervention of a system administrator to make
available.
Reservation The job is waiting its advanced reservation to become available.
Resources The job is waiting for resources to become available.
SystemFailure Failure of the Slurm system, a file system, the network, etc.
TimeLimit The job exhausted its time limit.
WaitingForScheduling No reason has been set for this job yet. Waiting for the scheduler to determine
the appropriate reason.
JOB STATE CODES
Jobs typically pass through several states in the course of their execution. The typical states are
PENDING, RUNNING, SUSPENDED, COMPLETING, and COMPLETED. An explanation of each state follows.
BF BOOT_FAIL Job terminated due to launch failure, typically due to a hardware failure (e.g.
unable to boot the node or block and the job can not be requeued).
CA CANCELLED Job was explicitly cancelled by the user or system administrator. The job may or may
not have been initiated.
CD COMPLETED Job has terminated all processes on all nodes with an exit code of zero.
CF CONFIGURING Job has been allocated resources, but are waiting for them to become ready for use
(e.g. booting).
CG COMPLETING Job is in the process of completing. Some processes on some nodes may still be
active.
DL DEADLINE Job terminated on deadline.
F FAILED Job terminated with non-zero exit code or other failure condition.
NF NODE_FAIL Job terminated due to failure of one or more allocated nodes.
OOM OUT_OF_MEMORY Job experienced out of memory error.
PD PENDING Job is awaiting resource allocation.
PR PREEMPTED Job terminated due to preemption.
R RUNNING Job currently has an allocation.
RD RESV_DEL_HOLD Job is being held after requested reservation was deleted.
RF REQUEUE_FED Job is being requeued by a federation.
RH REQUEUE_HOLD Held job is being requeued.
RQ REQUEUED Completing job is being requeued.
RS RESIZING Job is about to change size.
RV REVOKED Sibling was removed from cluster due to other cluster starting the job.
SI SIGNALING Job is being signaled.
SE SPECIAL_EXIT The job was requeued in a special state. This state can be set by users, typically in
EpilogSlurmctld, if the job has terminated with a particular exit value.
SO STAGE_OUT Job is staging out files.
ST STOPPED Job has an allocation, but execution has been stopped with SIGSTOP signal. CPUS have
been retained by this job.
S SUSPENDED Job has an allocation, but execution has been suspended and CPUs have been released
for other jobs.
TO TIMEOUT Job terminated upon reaching its time limit.
PERFORMANCE
Executing squeue sends a remote procedure call to slurmctld. If enough calls from squeue or other Slurm
client commands that send remote procedure calls to the slurmctld daemon come in at once, it can result
in a degradation of performance of the slurmctld daemon, possibly resulting in a denial of service.
Do not run squeue or other Slurm client commands that send remote procedure calls to slurmctld from loops
in shell scripts or other programs. Ensure that programs limit calls to squeue to the minimum necessary
for the information you are trying to gather.
ENVIRONMENT VARIABLES
Some squeue options may be set via environment variables. These environment variables, along with their
corresponding options, are listed below. (Note: Command line options will always override these
settings.)
SLURM_BITSTR_LEN Specifies the string length to be used for holding a job array's task ID expression.
The default value is 64 bytes. A value of 0 will print the full expression with any
length required. Larger values may adversely impact the application performance.
SLURM_CLUSTERS Same as --clusters
SLURM_CONF The location of the Slurm configuration file.
SLURM_DEBUG_FLAGS Specify debug flags for squeue to use. See DebugFlags in the slurm.conf(5) man page
for a full list of flags. The environment variable takes precedence over the setting
in the slurm.conf.
SLURM_TIME_FORMAT Specify the format used to report time stamps. A value of standard, the default
value, generates output in the form "year-month-dateThour:minute:second". A value of
relative returns only "hour:minute:second" if the current day. For other dates in
the current year it prints the "hour:minute" preceded by "Tomorr" (tomorrow),
"Ystday" (yesterday), the name of the day for the coming week (e.g. "Mon", "Tue",
etc.), otherwise the date (e.g. "25 Apr"). For other years it returns a date month
and year without a time (e.g. "6 Jun 2012"). All of the time stamps use a 24 hour
format.
A valid strftime() format can also be specified. For example, a value of "%a %T" will
report the day of the week and a time stamp (e.g. "Mon 12:34:56").
SQUEUE_ACCOUNT -A <account_list>, --account=<account_list>
SQUEUE_ALL -a, --all
SQUEUE_ARRAY -r, --array
SQUEUE_NAMES --name=<name_list>
SQUEUE_FEDERATION --federation
SQUEUE_FORMAT -o <output_format>, --format=<output_format>
SQUEUE_FORMAT2 -O <output_format>, --Format=<output_format>
SQUEUE_LICENSES -p-l <license_list>, --license=<license_list>
SQUEUE_LOCAL --local
SQUEUE_PARTITION -p <part_list>, --partition=<part_list>
SQUEUE_PRIORITY -P, --priority
SQUEUE_QOS -p <qos_list>, --qos=<qos_list>
SQUEUE_SIBLING --sibling
SQUEUE_SORT -S <sort_list>, --sort=<sort_list>
SQUEUE_STATES -t <state_list>, --states=<state_list>
SQUEUE_USERS -u <user_list>, --users=<user_list>
EXAMPLES
Print the jobs scheduled in the debug partition and in the COMPLETED state in the format with six right
justified digits for the job id followed by the priority with an arbitrary fields size:
$ squeue -p debug -t COMPLETED -o "%.6i %p"
JOBID PRIORITY
65543 99993
65544 99992
65545 99991
Print the job steps in the debug partition sorted by user:
$ squeue -s -p debug -S u
STEPID NAME PARTITION USER TIME NODELIST
65552.1 test1 debug alice 0:23 dev[1-4]
65562.2 big_run debug bob 0:18 dev22
65550.1 param1 debug candice 1:43:21 dev[6-12]
Print information only about jobs 12345, 12346 and 12348:
$ squeue --jobs 12345,12346,12348
JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON)
12345 debug job1 dave R 0:21 4 dev[9-12]
12346 debug job2 dave PD 0:00 8 (Resources)
12348 debug job3 ed PD 0:00 4 (Priority)
Print information only about job step 65552.1:
$ squeue --steps 65552.1
STEPID NAME PARTITION USER TIME NODELIST
65552.1 test2 debug alice 12:49 dev[1-4]
COPYING
Copyright (C) 2002-2007 The Regents of the University of California. Produced at Lawrence Livermore
National Laboratory (cf, DISCLAIMER).
Copyright (C) 2008-2010 Lawrence Livermore National Security.
Copyright (C) 2010-2022 SchedMD LLC.
This file is part of Slurm, a resource management program. For details, see
<https://slurm.schedmd.com/>.
Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
SEE ALSO
scancel(1), scontrol(1), sinfo(1), srun(1), slurm_load_ctl_conf (3), slurm_load_jobs (3), slurm_load_node (3), slurm_load_partitions (3)