Provided by: libnvme-dev_1.10-1_amd64 
NAME
enum nvme_status_field - Defines all parts of the nvme status field: status code, status
code type, and additional flags.
SYNOPSIS
enum nvme_status_field {
NVME_SCT_GENERIC ,
NVME_SCT_CMD_SPECIFIC ,
NVME_SCT_MEDIA ,
NVME_SCT_PATH ,
NVME_SCT_VS ,
NVME_SCT_MASK ,
NVME_SCT_SHIFT ,
NVME_SC_MASK ,
NVME_SC_SHIFT ,
NVME_SC_SUCCESS ,
NVME_SC_INVALID_OPCODE ,
NVME_SC_INVALID_FIELD ,
NVME_SC_CMDID_CONFLICT ,
NVME_SC_DATA_XFER_ERROR ,
NVME_SC_POWER_LOSS ,
NVME_SC_INTERNAL ,
NVME_SC_ABORT_REQ ,
NVME_SC_ABORT_QUEUE ,
NVME_SC_FUSED_FAIL ,
NVME_SC_FUSED_MISSING ,
NVME_SC_INVALID_NS ,
NVME_SC_CMD_SEQ_ERROR ,
NVME_SC_SGL_INVALID_LAST ,
NVME_SC_SGL_INVALID_COUNT ,
NVME_SC_SGL_INVALID_DATA ,
NVME_SC_SGL_INVALID_METADATA ,
NVME_SC_SGL_INVALID_TYPE ,
NVME_SC_CMB_INVALID_USE ,
NVME_SC_PRP_INVALID_OFFSET ,
NVME_SC_AWU_EXCEEDED ,
NVME_SC_OP_DENIED ,
NVME_SC_SGL_INVALID_OFFSET ,
NVME_SC_HOSTID_FORMAT ,
NVME_SC_KAT_EXPIRED ,
NVME_SC_KAT_INVALID ,
NVME_SC_CMD_ABORTED_PREMEPT ,
NVME_SC_SANITIZE_FAILED ,
NVME_SC_SANITIZE_IN_PROGRESS ,
NVME_SC_SGL_INVALID_GRANULARITY ,
NVME_SC_CMD_IN_CMBQ_NOT_SUPP ,
NVME_SC_NS_WRITE_PROTECTED ,
NVME_SC_CMD_INTERRUPTED ,
NVME_SC_TRAN_TPORT_ERROR ,
NVME_SC_PROHIBITED_BY_CMD_AND_FEAT ,
NVME_SC_ADMIN_CMD_MEDIA_NOT_READY ,
NVME_SC_FDP_DISABLED ,
NVME_SC_INVALID_PLACEMENT_HANDLE_LIST ,
NVME_SC_LBA_RANGE ,
NVME_SC_CAP_EXCEEDED ,
NVME_SC_NS_NOT_READY ,
NVME_SC_RESERVATION_CONFLICT ,
NVME_SC_FORMAT_IN_PROGRESS ,
NVME_SC_CQ_INVALID ,
NVME_SC_QID_INVALID ,
NVME_SC_QUEUE_SIZE ,
NVME_SC_ABORT_LIMIT ,
NVME_SC_ABORT_MISSING ,
NVME_SC_ASYNC_LIMIT ,
NVME_SC_FIRMWARE_SLOT ,
NVME_SC_FIRMWARE_IMAGE ,
NVME_SC_INVALID_VECTOR ,
NVME_SC_INVALID_LOG_PAGE ,
NVME_SC_INVALID_FORMAT ,
NVME_SC_FW_NEEDS_CONV_RESET ,
NVME_SC_INVALID_QUEUE ,
NVME_SC_FEATURE_NOT_SAVEABLE ,
NVME_SC_FEATURE_NOT_CHANGEABLE ,
NVME_SC_FEATURE_NOT_PER_NS ,
NVME_SC_FW_NEEDS_SUBSYS_RESET ,
NVME_SC_FW_NEEDS_RESET ,
NVME_SC_FW_NEEDS_MAX_TIME ,
NVME_SC_FW_ACTIVATE_PROHIBITED ,
NVME_SC_OVERLAPPING_RANGE ,
NVME_SC_NS_INSUFFICIENT_CAP ,
NVME_SC_NS_ID_UNAVAILABLE ,
NVME_SC_NS_ALREADY_ATTACHED ,
NVME_SC_NS_IS_PRIVATE ,
NVME_SC_NS_NOT_ATTACHED ,
NVME_SC_THIN_PROV_NOT_SUPP ,
NVME_SC_CTRL_LIST_INVALID ,
NVME_SC_SELF_TEST_IN_PROGRESS ,
NVME_SC_BP_WRITE_PROHIBITED ,
NVME_SC_INVALID_CTRL_ID ,
NVME_SC_INVALID_SEC_CTRL_STATE ,
NVME_SC_INVALID_CTRL_RESOURCES ,
NVME_SC_INVALID_RESOURCE_ID ,
NVME_SC_PMR_SAN_PROHIBITED ,
NVME_SC_ANA_GROUP_ID_INVALID ,
NVME_SC_ANA_ATTACH_FAILED ,
NVME_SC_INSUFFICIENT_CAP ,
NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED ,
NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED ,
NVME_SC_IOCS_NOT_SUPPORTED ,
NVME_SC_IOCS_NOT_ENABLED ,
NVME_SC_IOCS_COMBINATION_REJECTED ,
NVME_SC_INVALID_IOCS ,
NVME_SC_ID_UNAVAILABLE ,
NVME_SC_INVALID_DISCOVERY_INFO ,
NVME_SC_ZONING_DATA_STRUCT_LOCKED ,
NVME_SC_ZONING_DATA_STRUCT_NOTFND ,
NVME_SC_INSUFFICIENT_DISC_RES ,
NVME_SC_REQSTD_FUNCTION_DISABLED ,
NVME_SC_ZONEGRP_ORIGINATOR_INVLD ,
NVME_SC_BAD_ATTRIBUTES ,
NVME_SC_INVALID_PI ,
NVME_SC_READ_ONLY ,
NVME_SC_CMD_SIZE_LIMIT_EXCEEDED ,
NVME_SC_INCOMPATIBLE_NS ,
NVME_SC_FAST_COPY_NOT_POSSIBLE ,
NVME_SC_OVERLAPPING_IO_RANGE ,
NVME_SC_INSUFFICIENT_RESOURCES ,
NVME_SC_CONNECT_FORMAT ,
NVME_SC_CONNECT_CTRL_BUSY ,
NVME_SC_CONNECT_INVALID_PARAM ,
NVME_SC_CONNECT_RESTART_DISC ,
NVME_SC_CONNECT_INVALID_HOST ,
NVME_SC_DISCONNECT_INVALID_QTYPE ,
NVME_SC_DISCOVERY_RESTART ,
NVME_SC_AUTH_REQUIRED ,
NVME_SC_ZNS_INVALID_OP_REQUEST ,
NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE ,
NVME_SC_ZNS_BOUNDARY_ERROR ,
NVME_SC_ZNS_FULL ,
NVME_SC_ZNS_READ_ONLY ,
NVME_SC_ZNS_OFFLINE ,
NVME_SC_ZNS_INVALID_WRITE ,
NVME_SC_ZNS_TOO_MANY_ACTIVE ,
NVME_SC_ZNS_TOO_MANY_OPENS ,
NVME_SC_ZNS_INVAL_TRANSITION ,
NVME_SC_WRITE_FAULT ,
NVME_SC_READ_ERROR ,
NVME_SC_GUARD_CHECK ,
NVME_SC_APPTAG_CHECK ,
NVME_SC_REFTAG_CHECK ,
NVME_SC_COMPARE_FAILED ,
NVME_SC_ACCESS_DENIED ,
NVME_SC_UNWRITTEN_BLOCK ,
NVME_SC_STORAGE_TAG_CHECK ,
NVME_SC_ANA_INTERNAL_PATH_ERROR ,
NVME_SC_ANA_PERSISTENT_LOSS ,
NVME_SC_ANA_INACCESSIBLE ,
NVME_SC_ANA_TRANSITION ,
NVME_SC_CTRL_PATH_ERROR ,
NVME_SC_HOST_PATH_ERROR ,
NVME_SC_CMD_ABORTED_BY_HOST ,
NVME_SC_CRD ,
NVME_SC_MORE ,
NVME_SC_DNR
};
Constants
NVME_SCT_GENERIC
Generic errors applicable to multiple opcodes
NVME_SCT_CMD_SPECIFIC
Errors associated to a specific opcode
NVME_SCT_MEDIA
Errors associated with media and data integrity
NVME_SCT_PATH
Errors associated with the paths connection
NVME_SCT_VS Vendor specific errors
NVME_SCT_MASK
Mask to get the value of the Status Code Type
NVME_SCT_SHIFT
Shift value to get the value of the Status Code Type
NVME_SC_MASK
Mask to get the value of the status code.
NVME_SC_SHIFT
Shift value to get the value of the status code.
NVME_SC_SUCCESS
Successful Completion: The command completed without error.
NVME_SC_INVALID_OPCODE
Invalid Command Opcode: A reserved coded value or an unsupported value in the
command opcode field.
NVME_SC_INVALID_FIELD
Invalid Field in Command: A reserved coded value or an unsupported value in a
defined field.
NVME_SC_CMDID_CONFLICT
Command ID Conflict: The command identifier is already in use.
NVME_SC_DATA_XFER_ERROR
Data Transfer Error: Transferring the data or metadata associated with a
command experienced an error.
NVME_SC_POWER_LOSS
Commands Aborted due to Power Loss Notification: Indicates that the command
was aborted due to a power loss notification.
NVME_SC_INTERNAL
Internal Error: The command was not completed successfully due to an internal
error.
NVME_SC_ABORT_REQ
Command Abort Requested: The command was aborted due to an Abort command being
received that specified the Submission Queue Identifier and Command Identifier
of this command.
NVME_SC_ABORT_QUEUE
Command Aborted due to SQ Deletion: The command was aborted due to a Delete
I/O Submission Queue request received for the Submission Queue to which the
command was submitted.
NVME_SC_FUSED_FAIL
Command Aborted due to Failed Fused Command: The command was aborted due to
the other command in a fused operation failing.
NVME_SC_FUSED_MISSING
Aborted due to Missing Fused Command: The fused command was aborted due to the
adjacent submission queue entry not containing a fused command that is the
other command.
NVME_SC_INVALID_NS
Invalid Namespace or Format: The namespace or the format of that namespace is
invalid.
NVME_SC_CMD_SEQ_ERROR
Command Sequence Error: The command was aborted due to a protocol violation in
a multi-command sequence.
NVME_SC_SGL_INVALID_LAST
Invalid SGL Segment Descriptor: The command includes an invalid SGL Last
Segment or SGL Segment descriptor.
NVME_SC_SGL_INVALID_COUNT
Invalid Number of SGL Descriptors: There is an SGL Last Segment descriptor or
an SGL Segment descriptor in a location other than the last descriptor of a
segment based on the length indicated.
NVME_SC_SGL_INVALID_DATA
Data SGL Length Invalid: This may occur if the length of a Data SGL is too
short. This may occur if the length of a Data SGL is too long and the
controller does not support SGL transfers longer than the amount of data to be
transferred as indicated in the SGL Support field of the Identify Controller
data structure.
NVME_SC_SGL_INVALID_METADATA
Metadata SGL Length Invalid: This may occur if the length of a Metadata SGL is
too short. This may occur if the length of a Metadata SGL is too long and the
controller does not support SGL transfers longer than the amount of data to be
transferred as indicated in the SGL Support field of the Identify Controller
data structure.
NVME_SC_SGL_INVALID_TYPE
SGL Descriptor Type Invalid: The type of an SGL Descriptor is a type that is
not supported by the controller.
NVME_SC_CMB_INVALID_USE
Invalid Use of Controller Memory Buffer: The attempted use of the Controller
Memory Buffer is not supported by the controller.
NVME_SC_PRP_INVALID_OFFSET
PRP Offset Invalid: The Offset field for a PRP entry is invalid.
NVME_SC_AWU_EXCEEDED
Atomic Write Unit Exceeded: The length specified exceeds the atomic write unit
size.
NVME_SC_OP_DENIED
Operation Denied: The command was denied due to lack of access rights. Refer
to the appropriate security specification.
NVME_SC_SGL_INVALID_OFFSET
SGL Offset Invalid: The offset specified in a descriptor is invalid. This may
occur when using capsules for data transfers in NVMe over Fabrics
implementations and an invalid offset in the capsule is specified.
NVME_SC_HOSTID_FORMAT
Host Identifier Inconsistent Format: The NVM subsystem detected the
simultaneous use of 64- bit and 128-bit Host Identifier values on different
controllers.
NVME_SC_KAT_EXPIRED
Keep Alive Timer Expired: The Keep Alive Timer expired.
NVME_SC_KAT_INVALID
Keep Alive Timeout Invalid: The Keep Alive Timeout value specified is invalid.
NVME_SC_CMD_ABORTED_PREMEPT
Command Aborted due to Preempt and Abort: The command was aborted due to a
Reservation Acquire command.
NVME_SC_SANITIZE_FAILED
Sanitize Failed: The most recent sanitize operation failed and no recovery
action has been successfully completed.
NVME_SC_SANITIZE_IN_PROGRESS
Sanitize In Progress: The requested function (e.g., command) is prohibited
while a sanitize operation is in progress.
NVME_SC_SGL_INVALID_GRANULARITY
SGL Data Block Granularity Invalid: The Address alignment or Length
granularity for an SGL Data Block descriptor is invalid.
NVME_SC_CMD_IN_CMBQ_NOT_SUPP
Command Not Supported for Queue in CMB: The implementation does not support
submission of the command to a Submission Queue in the Controller Memory
Buffer or command completion to a Completion Queue in the Controller Memory
Buffer.
NVME_SC_NS_WRITE_PROTECTED
Namespace is Write Protected: The command is prohibited while the namespace is
write protected as a result of a change in the namespace write protection
state as defined by the Namespace Write Protection State Machine.
NVME_SC_CMD_INTERRUPTED
Command Interrupted: Command processing was interrupted and the controller is
unable to successfully complete the command. The host should retry the
command.
NVME_SC_TRAN_TPORT_ERROR
Transient Transport Error: A transient transport error was detected. If the
command is retried on the same controller, the command is likely to succeed. A
command that fails with a transient transport error four or more times should
be treated as a persistent transport error that is not likely to succeed if
retried on the same controller.
NVME_SC_PROHIBITED_BY_CMD_AND_FEAT
Command Prohibited by Command and Feature Lockdown: The command was aborted
due to command execution being prohibited by the Command and Feature Lockdown.
NVME_SC_ADMIN_CMD_MEDIA_NOT_READY
Admin Command Media Not Ready: The Admin command requires access to media and
the media is not ready.
NVME_SC_FDP_DISABLED
Command is not allowed when Flexible Data Placement is disabled.
NVME_SC_INVALID_PLACEMENT_HANDLE_LIST
The Placement Handle List is invalid due to invalid Reclaim Unit Handle
Identifier or valid Reclaim Unit Handle Identifier but restricted or the
Placement Handle List number of entries exceeded the maximum number allowed.
NVME_SC_LBA_RANGE
LBA Out of Range: The command references an LBA that exceeds the size of the
namespace.
NVME_SC_CAP_EXCEEDED
Capacity Exceeded: Execution of the command has caused the capacity of the
namespace to be exceeded.
NVME_SC_NS_NOT_READY
Namespace Not Ready: The namespace is not ready to be accessed as a result of
a condition other than a condition that is reported as an Asymmetric Namespace
Access condition.
NVME_SC_RESERVATION_CONFLICT
Reservation Conflict: The command was aborted due to a conflict with a
reservation held on the accessed namespace.
NVME_SC_FORMAT_IN_PROGRESS
Format In Progress: A Format NVM command is in progress on the namespace.
NVME_SC_CQ_INVALID
Completion Queue Invalid: The Completion Queue identifier specified in the
command does not exist.
NVME_SC_QID_INVALID
Invalid Queue Identifier: The creation of the I/O Completion Queue failed due
to an invalid queue identifier specified as part of the command. An invalid
queue identifier is one that is currently in use or one that is outside the
range supported by the controller.
NVME_SC_QUEUE_SIZE
Invalid Queue Size: The host attempted to create an I/O Completion Queue with
an invalid number of entries.
NVME_SC_ABORT_LIMIT
Abort Command Limit Exceeded: The number of concurrently outstanding Abort
commands has exceeded the limit indicated in the Identify Controller data
structure.
NVME_SC_ABORT_MISSING
Abort Command is missing: The abort command is missing.
NVME_SC_ASYNC_LIMIT
Asynchronous Event Request Limit Exceeded: The number of concurrently
outstanding Asynchronous Event Request commands has been exceeded.
NVME_SC_FIRMWARE_SLOT
Invalid Firmware Slot: The firmware slot indicated is invalid or read only.
This error is indicated if the firmware slot exceeds the number supported.
NVME_SC_FIRMWARE_IMAGE
Invalid Firmware Image: The firmware image specified for activation is invalid
and not loaded by the controller.
NVME_SC_INVALID_VECTOR
Invalid Interrupt Vector: The creation of the I/O Completion Queue failed due
to an invalid interrupt vector specified as part of the command.
NVME_SC_INVALID_LOG_PAGE
Invalid Log Page: The log page indicated is invalid. This error condition is
also returned if a reserved log page is requested.
NVME_SC_INVALID_FORMAT
Invalid Format: The LBA Format specified is not supported.
NVME_SC_FW_NEEDS_CONV_RESET
Firmware Activation Requires Conventional Reset: The firmware commit was
successful, however, activation of the firmware image requires a conventional
reset.
NVME_SC_INVALID_QUEUE
Invalid Queue Deletion: Invalid I/O Completion Queue specified to delete.
NVME_SC_FEATURE_NOT_SAVEABLE
Feature Identifier Not Saveable: The Feature Identifier specified does not
support a saveable value.
NVME_SC_FEATURE_NOT_CHANGEABLE
Feature Not Changeable: The Feature Identifier is not able to be changed.
NVME_SC_FEATURE_NOT_PER_NS
Feature Not Namespace Specific: The Feature Identifier specified is not
namespace specific. The Feature Identifier settings apply across all
namespaces.
NVME_SC_FW_NEEDS_SUBSYS_RESET
Firmware Activation Requires NVM Subsystem Reset: The firmware commit was
successful, however, activation of the firmware image requires an NVM
Subsystem.
NVME_SC_FW_NEEDS_RESET
Firmware Activation Requires Controller Level Reset: The firmware commit was
successful; however, the image specified does not support being activated
without a reset.
NVME_SC_FW_NEEDS_MAX_TIME
Firmware Activation Requires Maximum Time Violation: The image specified if
activated immediately would exceed the Maximum Time for Firmware Activation
(MTFA) value reported in Identify Controller.
NVME_SC_FW_ACTIVATE_PROHIBITED
Firmware Activation Prohibited: The image specified is being prohibited from
activation by the controller for vendor specific reasons.
NVME_SC_OVERLAPPING_RANGE
Overlapping Range: The downloaded firmware image has overlapping ranges.
NVME_SC_NS_INSUFFICIENT_CAP
Namespace Insufficient Capacity: Creating the namespace requires more free
space than is currently available.
NVME_SC_NS_ID_UNAVAILABLE
Namespace Identifier Unavailable: The number of namespaces supported has been
exceeded.
NVME_SC_NS_ALREADY_ATTACHED
Namespace Already Attached: The controller is already attached to the
namespace specified.
NVME_SC_NS_IS_PRIVATE
Namespace Is Private: The namespace is private and is already attached to one
controller.
NVME_SC_NS_NOT_ATTACHED
Namespace Not Attached: The request to detach the controller could not be
completed because the controller is not attached to the namespace.
NVME_SC_THIN_PROV_NOT_SUPP
Thin Provisioning Not Supported: Thin provisioning is not supported by the
controller.
NVME_SC_CTRL_LIST_INVALID
Controller List Invalid: The controller list provided contains invalid
controller ids.
NVME_SC_SELF_TEST_IN_PROGRESS
Device Self-test In Progress: The controller or NVM subsystem already has a
device self-test operation in process.
NVME_SC_BP_WRITE_PROHIBITED
Boot Partition Write Prohibited: The command is trying to modify a locked Boot
Partition.
NVME_SC_INVALID_CTRL_ID
Invalid Controller Identifier:
NVME_SC_INVALID_SEC_CTRL_STATE
Invalid Secondary Controller State
NVME_SC_INVALID_CTRL_RESOURCES
Invalid Number of Controller Resources
NVME_SC_INVALID_RESOURCE_ID
Invalid Resource Identifier
NVME_SC_PMR_SAN_PROHIBITED
Sanitize Prohibited While Persistent Memory Region is Enabled
NVME_SC_ANA_GROUP_ID_INVALID
ANA Group Identifier Invalid: The specified ANA Group Identifier (ANAGRPID) is
not supported in the submitted command.
NVME_SC_ANA_ATTACH_FAILED
ANA Attach Failed: The controller is not attached to the namespace as a result
of an ANA condition.
NVME_SC_INSUFFICIENT_CAP
Insufficient Capacity: Requested operation requires more free space than is
currently available.
NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED
Namespace Attachment Limit Exceeded: Attaching the ns to a controller causes
max number of ns attachments allowed to be exceeded.
NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED
Prohibition of Command Execution Not Supported
NVME_SC_IOCS_NOT_SUPPORTED
I/O Command Set Not Supported
NVME_SC_IOCS_NOT_ENABLED
I/O Command Set Not Enabled
NVME_SC_IOCS_COMBINATION_REJECTED
I/O Command Set Combination Rejected
NVME_SC_INVALID_IOCS
Invalid I/O Command Set
NVME_SC_ID_UNAVAILABLE
Identifier Unavailable
NVME_SC_INVALID_DISCOVERY_INFO
The discovery information provided in one or more extended discovery
information entries is not applicable for the type of entity selected in the
Entity Type (ETYPE) field of the Discovery Information Management command data
portion’s header.
NVME_SC_ZONING_DATA_STRUCT_LOCKED
The requested Zoning data structure is locked on the CDC.
NVME_SC_ZONING_DATA_STRUCT_NOTFND
The requested Zoning data structure does not exist on the CDC.
NVME_SC_INSUFFICIENT_DISC_RES
The number of discover information entries provided in the data portion of the
Discovery Information Management command for a registration task (i.e., TAS
field cleared to 0h) exceeds the available capacity for new discovery
information entries on the CDC or DDC. This may be a transient condition.
NVME_SC_REQSTD_FUNCTION_DISABLED
Fabric Zoning is not enabled on the CDC
NVME_SC_ZONEGRP_ORIGINATOR_INVLD
The NQN contained in the ZoneGroup Originator field does not match the Host
NQN used by the DDC to connect to the CDC.
NVME_SC_BAD_ATTRIBUTES
Conflicting Dataset Management Attributes
NVME_SC_INVALID_PI
Invalid Protection Information
NVME_SC_READ_ONLY
Attempted Write to Read Only Range
NVME_SC_CMD_SIZE_LIMIT_EXCEEDED
Command Size Limit Exceeded
NVME_SC_INCOMPATIBLE_NS
Incompatible Namespace or Format: At least one source namespace and the
destination namespace have incompatible formats.
NVME_SC_FAST_COPY_NOT_POSSIBLE
Fast Copy Not Possible: The Fast Copy Only (FCO) bit was set to ‘1’ in a
Source Range entry and the controller was not able to use fast copy operations
to copy the specified data.
NVME_SC_OVERLAPPING_IO_RANGE
Overlapping I/O Range: A source logical block range overlaps the destination
logical block range.
NVME_SC_INSUFFICIENT_RESOURCES
Insufficient Resources: A resource shortage prevented the controller from
performing the requested copy.
NVME_SC_CONNECT_FORMAT
Incompatible Format: The NVM subsystem does not support the record format
specified by the host.
NVME_SC_CONNECT_CTRL_BUSY
Controller Busy: The controller is already associated with a host.
NVME_SC_CONNECT_INVALID_PARAM
Connect Invalid Parameters: One or more of the command parameters.
NVME_SC_CONNECT_RESTART_DISC
Connect Restart Discovery: The NVM subsystem requested is not available.
NVME_SC_CONNECT_INVALID_HOST
Connect Invalid Host: The host is either not allowed to establish an
association to any controller in the NVM subsystem or the host is not allowed
to establish an association to the specified controller
NVME_SC_DISCONNECT_INVALID_QTYPE
Invalid Queue Type: The command was sent on the wrong queue type.
NVME_SC_DISCOVERY_RESTART
Discover Restart: The snapshot of the records is now invalid or out of date.
NVME_SC_AUTH_REQUIRED
Authentication Required: NVMe in-band authentication is required and the queue
has not yet been authenticated.
NVME_SC_ZNS_INVALID_OP_REQUEST
Invalid Zone Operation Request: The operation requested is invalid. This may
be due to various conditions, including: attempting to allocate a ZRWA when a
zone is not in the ZSE:Empty state; or invalid Flush Explicit ZRWA Range Send
Zone Action operation.
NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE
ZRWA Resources Unavailable: No ZRWAs are available.
NVME_SC_ZNS_BOUNDARY_ERROR
Zone Boundary Error: The command specifies logical blocks in more than one
zone.
NVME_SC_ZNS_FULL
Zone Is Full: The accessed zone is in the ZSF:Full state.
NVME_SC_ZNS_READ_ONLY
Zone Is Read Only: The accessed zone is in the ZSRO:Read Only state.
NVME_SC_ZNS_OFFLINE
Zone Is Offline: The accessed zone is in the ZSO:Offline state.
NVME_SC_ZNS_INVALID_WRITE
Zone Invalid Write: The write to a zone was not at the write pointer.
NVME_SC_ZNS_TOO_MANY_ACTIVE
Too Many Active Zones: The controller does not allow additional active zones.
NVME_SC_ZNS_TOO_MANY_OPENS
Too Many Open Zones: The controller does not allow additional open zones.
NVME_SC_ZNS_INVAL_TRANSITION
Invalid Zone State Transition: The request is not a valid zone state
transition.
NVME_SC_WRITE_FAULT
Write Fault: The write data could not be committed to the media.
NVME_SC_READ_ERROR
Unrecovered Read Error: The read data could not be recovered from the media.
NVME_SC_GUARD_CHECK
End-to-end Guard Check Error: The command was aborted due to an end-to-end
guard check failure.
NVME_SC_APPTAG_CHECK
End-to-end Application Tag Check Error: The command was aborted due to an end-
to-end application tag check failure.
NVME_SC_REFTAG_CHECK
End-to-end Reference Tag Check Error: The command was aborted due to an end-
to-end reference tag check failure.
NVME_SC_COMPARE_FAILED
Compare Failure: The command failed due to a miscompare during a Compare
command.
NVME_SC_ACCESS_DENIED
Access Denied: Access to the namespace and/or LBA range is denied due to lack
of access rights.
NVME_SC_UNWRITTEN_BLOCK
Deallocated or Unwritten Logical Block: The command failed due to an attempt
to read from or verify an LBA range containing a deallocated or unwritten
logical block.
NVME_SC_STORAGE_TAG_CHECK
End-to-End Storage Tag Check Error: The command was aborted due to an end-to-
end storage tag check failure.
NVME_SC_ANA_INTERNAL_PATH_ERROR
Internal Path Error: The command was not completed as the result of a
controller internal error that is specific to the controller processing the
command.
NVME_SC_ANA_PERSISTENT_LOSS
Asymmetric Access Persistent Loss: The requested function (e.g., command) is
not able to be performed as a result of the relationship between the
controller and the namespace being in the ANA Persistent Loss state.
NVME_SC_ANA_INACCESSIBLE
Asymmetric Access Inaccessible: The requested function (e.g., command) is not
able to be performed as a result of the relationship between the controller
and the namespace being in the ANA Inaccessible state.
NVME_SC_ANA_TRANSITION
Asymmetric Access Transition: The requested function (e.g., command) is not
able to be performed as a result of the relationship between the controller
and the namespace transitioning between Asymmetric Namespace Access states.
NVME_SC_CTRL_PATH_ERROR
Controller Pathing Error: A pathing error was detected by the controller.
NVME_SC_HOST_PATH_ERROR
Host Pathing Error: A pathing error was detected by the host.
NVME_SC_CMD_ABORTED_BY_HOST
Command Aborted By Host: The command was aborted as a result of host action.
NVME_SC_CRD Mask to get value of Command Retry Delay index
NVME_SC_MORE
More bit. If set, more status information for this command as part of the
Error Information log that may be retrieved with the Get Log Page command.
NVME_SC_DNR Do Not Retry bit. If set, if the same command is re-submitted to any
controller in the NVM subsystem, then that re-submitted command is expected to
fail.