Ubuntu Manpage: slapo-dynlist - Dynamic List overlay to slapd

Provided by: slapd_2.6.8+dfsg-1~exp4ubuntu1_amd64

NAME

       slapo-dynlist - Dynamic List overlay to slapd

SYNOPSIS

       /etc/ldap/slapd.conf

DESCRIPTION

       The dynlist overlay to slapd(8) allows expansion of dynamic lists and groups.  Any time an
       entry with a  specific  objectClass  (defined  in  the  overlay  configuration)  is  being
       returned,  the  LDAP  URI-valued  occurrences of a specific attribute (also defined in the
       overlay configuration) are expanded into the corresponding entries.

       For a dynamic list, the values of the attributes listed in the  URI  are  added  from  the
       matching  entries  to  the  original  entry.   No recursion is allowed, to avoid potential
       infinite loops.  The resulting entry must comply with the LDAP data model, so  constraints
       are  enforced.   For  example, if a SINGLE-VALUE attribute is listed, only the first value
       found during the list expansion appears in the final entry.

       For a dynamic group, the DNs of the matching entries are added to a  member  attribute  in
       the original entry.

       All dynamic behavior is disabled when the manageDSAit control (RFC 3296) is used.  In that
       case, the contents of the original entry  is  returned;  namely,  the  URLs  are  returned
       instead of being expanded.

CONFIGURATION

The config directives that are specific to the dynlist overlay must be prefixed by
dynlist-, to avoid potential conflicts with directives specific to the underlying database
or to other stacked overlays.

overlay dynlist
This directive adds the dynlist overlay to the current database, or to the
frontend, if used before any database instantiation; see slapd.conf(5) for details.

This slapd.conf configuration option is defined for the dynlist overlay. It may have
multiple occurrences, and it must appear after the overlay directive.

dynlist-attrset <group-oc> [<URI>] <URL-ad> [options]

The value group-oc is the name of the objectClass that triggers the dynamic
expansion of the data.

The optional URI restricts expansion only to entries matching the DN, the scope and
the filter portions of the URI.

The value URL-ad is the name of the attributeDescription that contains the URI that
is expanded by the overlay; if none is present, no expansion occurs. If the
intersection of the attributes requested by the search operation (or the asserted
attribute for compares) and the attributes listed in the URI is empty, no expansion
occurs for that specific URI. It must be a subtype of labeledURI.

The remaining options depend on whether a dynamic list or a dynamic group is being
configured.

For a dynamic list, the allowed options have the form

[<mapped-ad>:<list-ad> ...]

The mapped-ad can be used to remap attributes obtained through expansion. The
list-ad must be one of the attributes returned in the expansion of the URIs in the
URL-ad attribute of the dynamic entry. Multiple mapping statements can be used.
Note that in order for dynamic lists to be usable in a search filter, the dynamic
attributes to be filtered must be explicitly mapped. They can be mapped to
themselves if no transformation is required.

For a dynamic group, the allowed options are

<member-ad>[+<memberOf-ad>[@<static-oc>[*]]]

The member-ad is required; this attribute will list the DN of the entries resulting
from the internal search. In this case, the attrs portion of the URIs in the URL-
ad attribute must be absent, and the DNs of all the entries resulting from the
expansion of the URIs are listed as values of this attribute. Compares that assert
the value of the member-ad attribute of entries with group-oc objectClass apply as
if the DN of the entries resulting from the expansion of the URI were present in
the group-oc entry as values of the member-ad attribute. If the optional memberOf-
ad attribute is also specified, then it will be populated with the DNs of the
dynamic groups that an entry is a member of. If the optional static-oc objectClass
is also specified, then the memberOf attribute will also be populated with the DNs
of the static groups that an entry is a member of. If the optional * character is
also specified, then the member and memberOf values will be populated recursively,
for nested groups. Note that currently nesting is only supported for Search
operations, not Compares.

dynlist-simple TRUE | FALSE
This option downgrades to the behavior of the OpenLDAP 2.4 dynlist overlay. It
disables memberOf processing, nested group support, and filter evaluation of
dynamically generated values. The default is FALSE.

The dynlist overlay may be used with any backend, but it is mainly intended for use with
local storage backends. In case the URI expansion is very resource-intensive and occurs
frequently with well-defined patterns, one should consider adding a proxycache later on in
the overlay stack.

AUTHORIZATION

       By default the expansions are performed using the identity of the current LDAP user.  This
       identity may be overridden by setting the dgIdentity attribute in the group's entry to the
       DN of another LDAP user.  In that case the dgIdentity will be used when expanding the URIs
       in the object.  Setting the dgIdentity to a zero-length string will cause  the  expansions
       to  be  performed  anonymously.   Note  that  the  dgIdentity  attribute is defined in the
       dyngroup schema, and this schema  must  be  loaded  before  the  dgIdentity  authorization
       feature  may  be used.  If the dgAuthz attribute is also present in the group's entry, its
       values are used to determine what identities are  authorized  to  use  the  dgIdentity  to
       expand  the  group.   Values  of  the dgAuthz attribute must conform to the (experimental)
       OpenLDAP authz syntax.  When using dynamic memberOf in search filters,  search  access  to
       the entryDN pseudo-attribute is required.

EXAMPLE

       This  example collects all the email addresses of a database into a single entry; first of
       all, make sure that slapd.conf contains the directives:

           include /path/to/dyngroup.schema
           # ...

           database <database>
           # ...

           overlay dynlist
           dynlist-attrset groupOfURLs memberURL

       and that slapd loads dynlist.la, if compiled  as  a  run-time  module;  then  add  to  the
       database an entry like

           dn: cn=Dynamic List,ou=Groups,dc=example,dc=com
           objectClass: groupOfURLs
           cn: Dynamic List
           memberURL: ldap:///ou=People,dc=example,dc=com?mail?sub?(objectClass=person)

       If no <attrs> are provided in the URI, all (non-operational) attributes are collected.

       The  values  of  the  above list can not be evaluated in a search filter. To enable filter
       evaluation on the dynamic list, the configuration must be changed to  explicitly  map  the
       dynamic attributes to be filtered. In this case mail is just mapped to itself.

           include /path/to/dyngroup.schema
           # ...

           database <database>
           # ...

           overlay dynlist
           dynlist-attrset groupOfURLs memberURL mail:mail

       This example implements the dynamic group feature on the member attribute:

           include /path/to/dyngroup.schema
           # ...

           database <database>
           # ...

           overlay dynlist
           dynlist-attrset groupOfURLs memberURL member

       A dynamic group with dgIdentity authorization could be created with an entry like

           dn: cn=Dynamic Group,ou=Groups,dc=example,dc=com
           objectClass: groupOfURLs
           objectClass: dgIdentityAux
           cn: Dynamic Group
           memberURL: ldap:///ou=People,dc=example,dc=com??sub?(objectClass=person)
           dgIdentity: cn=Group Proxy,ou=Services,dc=example,dc=com

       This  example  extends  the dynamic group feature to add a dynamic dgMemberOf attribute to
       all the members of a dynamic group:

           include /path/to/dyngroup.schema
           # ...

           database <database>
           # ...

           overlay dynlist
           dynlist-attrset groupOfURLs memberURL member+dgMemberOf

       This example extends the dynamic memberOf feature to add the memberOf attribute to all the
       members of both static and dynamic groups:

           include /path/to/dyngroup.schema
           # ...

           database <database>
           # ...

           overlay dynlist
           dynlist-attrset groupOfURLs memberURL member+memberOf@groupOfNames

       This dynamic memberOf feature can fully replace the functionality of the slapo-memberof(5)
       overlay.

FILES

       /etc/ldap/slapd.conf
              default slapd configuration file

BACKWARD COMPATIBILITY

       The dynlist overlay has been reworked with the 2.5 release to use a  consistent  namespace
       as with other overlays. As a side-effect the following cn=config parameters are deprecated
       and will be removed in a future release: olcDlAttrSet is replaced  with  olcDynListAttrSet
       olcDynamicList is replaced with olcDynListConfig

BUGS

       Filtering on dynamic groups may return incomplete results if the search operation uses the
       pagedResults control.

ACKNOWLEDGEMENTS

       This module was written in 2004 by Pierangelo Masarati for SysNet s.n.c.

       Attribute remapping was contributed in 2008 by Emmanuel Dreyfus.