Provided by: fizmo-ncursesw_0.7.14-2build3_amd64 
NAME
fizmo-ncursesw - wide-character-ncurses implementation of the fizmo Z-Machine Interpreter.
SYNOPSIS
fizmo-ncursesw [ options ] [ storyfile [ blorbfile ] | storytitle | quetzal-save-file ]
DESCRIPTION
fizmo-ncursesw is a frontend for the fizmo Z-Machine interpreter—“Fimzo interprets Z-
machine opcodes”—based on the ncurses library, and supporting wide characters. It runs
most of the interactive fiction games aka text adventures written by Infocom or other
games which are based on the Z-Machine. Currently all versions except version 6 are
supported. It also supports sound via the SDL media library—see subsection “Sound
Support”—and implements basic Blorb support.
Starting a new game by providing a filename
This is the most direct way to get a game running. Just give the filename of the story
file at the end of the command line.
Starting a new game by providing its title
If the game you want to play is stored in the list of known games, you can simply start it
by providing the title instead of the full filename. Example: "fizmo sorcerer" will run
the game “Sorcerer”, no matter if it is stored in the current directory or somewhere else.
Starting a game from the list of story files
Without any filename given, fizmo will display the list of the currently known story files
it has indexed so far. Everytime fizmo is started and no story-name is provided, fizmo
will update the list of stories by indexing the directories listed in ZCODE_PATH or
INFOCOM_PATH.
Restoring a game from the command line
If you give the name of a quetzal save-game file at the end of the command line, fizmo
will use its story file list to locate the story file the saved game originates from to
directly restore the game.
Sound Support
fizmo-ncursesw supports sound via the SDL multimedia library which is available for most
unix flavors and Windows. Sound files are either read from a blorb file, or, old-infocom-
style-wise, from separate *.snd files which have to be stored in the same directory as the
game file. At the moment, only AIFF sounds can be read from a blorb file. When the game
requests a sound, fizmo uses the sound from the current blorb file. If no blorb file is
given or the sound cannot be found in it, fizmo tries to locate a file with the format
“GAMFIL00.SND” where GAMEFIL symbolizes the game filename shortened to a maximum of six
characters, the sound number—eventually padded by a leading zero so it has always a length
of two characters—and a “.SND” suffix. Both upper- and lowercase filenames are attempted.
That means you can directly use the sounds from the IF-archive at “/if-
archive/infocom/media/sound”.
Story-Metadata / IF Bibliography
fizmo-ncursesw is able to read metadata-files as defined in the “Treaty of Babel”. It will
try to read the metadata from all files ending in .iFiction which are found in the
$HOME/.config/fizmo directory. Fizmo will re-build the story list once the metadata files
have been changed. For this purpose, the timestamps for the metadata-files are stored in
the file $HOME/.config/fizmo/babel-timestamps. For more information about the treaty, see
http://babel.ifarchive.org/.
OPTIONS
-h, --help
Show help message and exit.
-b, --background-color <color-name>
Set background color. Valid color names are black, red, green, yellow, blue,
magenta, cyan and white.
-dh, --disable-hyphenation
Disable word hyphenation. Useful for languages other than the supported ones.
-ds, --disable-sound
Disable sound altogether. May be useful when playing on remote machines.
-ec, --enable-colors
Enable colors.
-f, --foreground-color <color-name>
Set foreground color. Valid color names are black, red, green, yellow, blue,
magenta, cyan and white.
-fi, --start-file-input
Start game with input from file.
-if, --input-file
Filename to read commands from.
-l, --set-locale <locale-code>
Set locale name for interpreter messages. Currently valid locale codes are en_GB,
de_DE and fr_FR.
-lm, --left-margin <width>
Set left margin width, requires a numeric argument.
-nc, --dont-use-colors
Don't use colors.
-nu, --dont-update-story-list
Don't update story-list on startup. Useful in case you've got a large number of
story files in your repository.
-nx, --disable-x11-graphics
Disable X11 graphics.
-pr, --predictable
Start with random generator in predictable mode.
-ra, --random
Start with random generator in standard random mode.
-rc, --record-commands
Activate recording of commands as soon as the game starts.
-rf, --record-filename
Filename to record input to.
-rm, --right-margin <width>
Set right margin width, requires a numeric argument.
-rs, --recursively-search <directory-name>
Search a directory recursively, meaning including subdirectories, for Z-Machine
files.
-s, --search <directory-name>
Search a single directory for Z-Machine files.
-s8, --force-8bit-sound
Never use 16-bit resolution, always convert to 8bit (some systems may not be
capable of 16-bit sound output).
-st, --start-transcript
Start game with scripting already enabled.
-sy, --sync-transcript
When a transcript is active, write data directly into the file as soon as possible.
-t, --set-tandy-flag
Sets the tandy flag, which emulates a game sold by the Tandy Corporation and
slightly alters the game behaviour. See http://www.ifarchive.org/if-
archive/infocom/info/tandy_bits.html for detailed information on what the tandy
flag does.
-tf, --transcript-filename
Set transcript filename for the current session.
-u, --update-story-list
In case you have disabled automatic updates for your story list, this option will
allow you to run the re-indexing manually.
-um, --umem
Use UMem instead of CMem for saving.
-mu, --maximum-undo-steps
Set number of maximum undo steps.
-xi, -enable-x11-inline-graphics
Enable XTerm graphics. This will make fizmo try to display graphics into a X-
Terminal. Since this represents a rather ugly hack—and may not work at all for some
installations—it is not enabled by default.
-xt, --enable-xterm-title
Use the XTerminal title bar to display the game name.
IN-GAME COMMANDS
/help Displays the list of available in-game commands.
/info Displays general version about the interpreter and its status, such as the version
number, story release and serial number, stack, memory and random generator status.
/config
Displays current configuration values.
/predictable
Switches the random generator from “random” in “predictable” state and vice-versa.
/recstart
Records all user input in a command-file.
/recstop
Stop recording user input.
/fileinput
Start reading commands from a file.
ENVIRONMENT
ZCODE_PATH
Default list of path names—separated by colons—to search for Z-Machine games.
INFOCOM_PATH
Alternate list of pathnames which is used when ZCODE_PATH is not set.
ZCODE_ROOT_PATH
List of colon-separated path names which are recursively searched for Z-Machine
games.
FILES
List of files
$HOME/.config/fizmo/config
May contain user configuration parameters. In case $XDG_CONFIG_HOME is defined and
contains an absolute path, $XDG_CONFIG_HOME/fizmo/config is used, in case of a
relative path $HOME/$XDG_CONFIG_HOME/fizmo/confg is read.
($XDG_CONFIG_DIRS)/fizmo/config
$XDG_CONFIG_DIRS may contain a colon separated list of config directories to
search. In case $XDG_CONFIG_DIRS is not set or empty /etc/xdg is used instead.
Every directory is searched for a subdirectory named fizmo containing a file
config, which will be searched for configuration parameters.
/etc/fizmo.conf
Global configuration parameters.
$HOME/.config/fizmo/story-list.txt
Contains the current list of story files known. In case $XDG_CONFIG_HOME is set the
path is altered as described above.
$HOME/.config/fizmo/*.iFiction
Fizmo treats all files with a suffix of .iFiction in the $HOME/.config/fizmo
directory as sources for story metadata. For more info, see section “Story-Metadata
/ IF Bibliography” above. In case $XDG_CONFIG_HOME is defined, see above.
$HOME/.config/fizmo/babel-timestamps
A list of .iFiction-files and their respective timestamps as they were found when
the story list was last built (knowing if the babel info has changed speeds up the
update process). $XDG_CONFIG_HOME will alter the directory as described before.
Option names for config files
The following section lists the config-file's equivalents for the command lines options.
For a detailed description of these options, see the “Options” section. Options have to
start at the beginning of the line without any leading whitespace. Comments start with a
'#' at the beginning of the line.
background-color = <color-name>
foreground-color = <color-name>
transcript-filename = <filename>
command-filename = <filename>
i18n-search-path = <colon-separated-directory-names>
locale = <language-code>
savegame-path = <directory-name>
random-mode = <random or predictable>
save-text-history-paragraphs = <number of paragraphs to store in savegames>
z-code-path = <colon-separated-directory-names>
z-code-root-path = <colon-separated-directory-names>
disable-sound = <no value or “true” means yes, otherwise no>
quetzal-umem = <no value or “true” means yes, otherwise no>
set-tandy-flag = <no value or “true” means yes, otherwise no>
start-command-recording-when-story-starts = <no value or “true” means yes, otherwise no>
start-file-input-when-story-starts = <no value or “true” means yes, otherwise no>
start-script-when-story-starts = <no value or “true” means yes, otherwise no>
disable-stream-2-hyphenation = <no value or “true” means yes, otherwise no>
disable-stream-2-wrap = <no value or “true” means yes, otherwise no>
stream-2-line-width = <line-width>
stream-2-left-margin = <margin-size>
sync-transcript = <no value or “true” means yes, otherwise no>
left-margin = <number-of-columns>
right-margin = <number-of-columns>
disable-hyphenation = <no value or “true” means yes, otherwise no>
disable-color = <any value means yes, empty no>
force-8bit-sound = <any value means yes, empty no>
enable-xterm-title = <no value or “true” means yes, otherwise no>
dont-udpate-story-list = <no value or “true” means yes, otherwise no>
max-undo-steps = <maximum number of stored undo steps as numerical value>
enable-xterm-graphics = <no value or “true” means yes, otherwise no>
display-x11-inline-image = <no value or “true” means yes, otherwise no>
MISCELLANEOUS
Scrolling back
You can use the PageUp and PageDown keys (some terminals may require holding down shift)
anytime to review text which was scrolled above the current window border.
Refreshing the screen
CTRL-L will refresh the current display.
Redrawing the screen
CTRL-R will redraw the current display. Contrary to CTRL-L, which refreshes the screen
based on the current layout, CTRL-R will reconstruct the latest output based on the output
history. This will help to display output which is hidden in case a game clears the
screen, writes some text into the top line and then turns on the score line which then
overlays the topmost line.
Resizing the screen
In general, resizing the screen works best for game versions 3 and before, which is
unfortunate since this encompasses only a part of the old Infocom games and none of the
modern ones. For all others—including Seastalker—the upper window (which means mostly the
status bar) cannot be resized and will remain fixed.
Undocumented Infocom commands
Here is a list of commands that some of Infocom's games seem to support, although I never
saw them menitioned in a manual or reference card.
$verify, $ve, $ver
Verifies if the game file is correct (essentially executes the “verify” opcode).
“$ve” works in almost all original Infocom games, “$ver” works in AMFV, Beyond
Zork, Bureaucracy, Nord and Bert, Sherlock, Trinity and Zork Zero.
$refre Refreshes the screen. Works in AMFV, Arthur, Bureaucracy, Nord and Bert, Sherlock,
Shogun, Trinity and Zork Zero.
$id The “$id” command gives information about the interpreter. Works in Border Zone,
Bureaucracy and Trinity.
$credi Shows a credit screen in Trinity and Beyond Zork.
#comm, #command
This will read your input from a file. Works in AMFV, Ballyhoo, Bureaucracy,
Enchanter, Hollywood Hjinx, Leather Goddesses, Lurking Horror, Plundered Hearts,
Shogun, Sorcerer, Spellbreaker, Stationfall, Trinity and Zork Zero.
#rand <int>
Seeds the random generator with the given value. May be used in AMFV, Ballyhoo,
Border Zone, Bureaucracy, Enchanter, Hollywood Hijinx, Leather Goddesses, Lurking
Horror, Plundered Hearts, Shogun, Sorcerer, Spellbreaker, Stationfall and Zork
Zero.
#reco, #record
This will record your commands into a file. Works in AMFV, Ballyhoo, Bureaucracy,
Enchanter, Hollywood Hjinx, Leather Goddesses, Lurking Horror, Plundered Hearts,
Shogun, Sorcerer, Spellbreaker, Stationfall and Zork Zero.
#unre, #unrecord
Stops recording commands into a file. Used in AMFV, Ballyhoo, Bureaucracy,
Enchanter, Hollywood Hijinx, Leather Goddesses, Lurking Horror, Plundered Hearts,
Shogun, Sorcerer, Spellbreaker, Stationfall and Zork Zero.
CREDITS
ITF — The InfoTaskForce
All the people who worked on the Z-Machine Specification, in alphabetical order: Chris
Tham, David Beazley, George Janczuk, David Fillmore, Graham Nelson, Mark Howell, Matthias
Pfaller, Mike Threepoint, Paul David Doherty, Peter Lisle, Russell Hoare and Stefan
Jokisch. See http://en.wikipedia.org/wiki/InfoTaskForce for more information.
The Frotz authors
When I got stuck I peeked into the frotz source. Thanks to Stefan Jokisch, Galen Hazelwood
and David Griffith.
Mark Howell
For the pix2gif code which is used in libdrilbo to parse the infocom .mg1 image files.
People helping with bug fixes, extensions, packaging, translations and more
in alphabetical order: Andrew Plotkin, B. Watson, Michael Baltes, David Batchelder, David
Leverton, Eric Forgeot, Jared Reisinger, irb, Lewis Gentry, Michael Dunlap, Mikko
Torvinen, Nikos Chantziaras, Patrick Matthäi, Samuel Verschelde, Stephen Gutknecht,
Zachary Kline and the people at MacPorts.
SEE ALSO
fizmo-sdl2(6), fizmo-console(6), frotz(6), xzip(6), jzip(6), inform(1)
AUTHOR
Fizmo was written in 2005–2017 by Christoph Ender.
BUGS
Fizmo is in beta stage and will probably still have some bugs. If you stumble upon one,
please send an e-mail to fizmo@spellbreaker.org.