Provided by: fence-agents-ipmilan_4.15.0-1ubuntu2_all
NAME
fence_ipmilan - Fence agent for IPMI fence_ilo3 - Fence agent for HP iLO3 (symlink) fence_ilo4 - Fence agent for HP iLO4 (symlink) fence_ilo5 - Fence agent for HP iLO5 (symlink) fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink) fence_imm - Fence agent for IBM Integrated Management Module (symlink) fence_idrac - Fence agent for Dell iDRAC (symlink)
DESCRIPTION
fence_ilo3 is a Power Fencing agent which can be used with machines controlled by IPMI. This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option. The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL:
PARAMETERS
-o, --action=[action] Fencing action (Default Value: reboot) -A, --auth=[auth] IPMI Lan Auth type. (md5|password|none) -C, --cipher=[cipher] Ciphersuite to use (same as ipmitool -C parameter) --hexadecimal-kg=[key] Hexadecimal-encoded Kg key for IPMIv2 authentication -a, --ip=[ip] IP address or hostname of fencing device -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 623) -P, --lanplus Use Lanplus to improve security of connection (Default Value: 1) -m, --method=[method] Method to fence (onoff|cycle) (Default Value: onoff) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[ip] IP address or hostname of fencing device (together with --port-as-ip) -L, --privlvl=[level] Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator) --target=[targetaddress] Bridge IPMI requests to the remote target address -l, --username=[name] Login name -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) --ipmitool-path=[path] Path to ipmitool binary (Default Value: /usr/bin/ipmitool) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --port-as-ip Make "port/plug" to be an alias to IP address --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 4) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --ipmitool-timeout=[timeout] Timeout (sec) for IPMI operation (Default Value: 2) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --use-sudo Use sudo (without password) when calling 3rd party software --sudo-path=[path] Path to sudo binary (Default Value: /usr/bin/sudo)
ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. diag Pulse a diagnostic interrupt to the processor(s).
STDIN PARAMETERS
action Fencing action (Default Value: reboot) auth IPMI Lan Auth type. (md5|password|none) cipher Ciphersuite to use (same as ipmitool -C parameter) hexadecimal_kg Hexadecimal-encoded Kg key for IPMIv2 authentication ip IP address or hostname of fencing device Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 623) lanplus Use Lanplus to improve security of connection (Default Value: 1) method Method to fence (onoff|cycle) (Default Value: onoff) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port privlvl Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator) target Bridge IPMI requests to the remote target address username Login name Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) ipmitool_path Path to ipmitool binary (Default Value: /usr/bin/ipmitool) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) port_as_ip Make "port/plug" to be an alias to IP address power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 4) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) ipmitool_timeout Timeout (sec) for IPMI operation (Default Value: 2) retry_on Count of attempts to retry power on (Default Value: 1) use_sudo Use sudo (without password) when calling 3rd party software Obsoletes: sudo sudo_path Path to sudo binary (Default Value: /usr/bin/sudo)