NAME

       newusers - update and create new users in batch

SYNOPSIS

       newusers [options] [file]

DESCRIPTION

       The newusers command reads a file (or the standard input by default) and uses this
       information to update a set of existing users or to create new users. Each line is in the
       same format as the standard password file (see passwd(5)) with the exceptions explained
       below:

       pw_name:pw_passwd:pw_uid:pw_gid:pw_gecos:pw_dir:pw_shell

       pw_name
           This is the name of the user.

           It can be the name of a new user or the name of an existing user (or a user created
           before by newusers). In case of an existing user, the user's information will be
           changed, otherwise a new user will be created.

       pw_passwd
           This field will be encrypted and used as the new value of the encrypted password.

       pw_uid
           This field is used to define the UID of the user.

           If the field is empty, a new (unused) UID will be defined automatically by newusers.

           If this field contains a number, this number will be used as the UID.

           If this field contains the name of an existing user (or the name of a user created
           before by newusers), the UID of the specified user will be used.

           If the UID of an existing user is changed, the files ownership of the user's file
           should be fixed manually.

       pw_gid
           This field is used to define the primary group ID for the user.

           If this field contains the name of an existing group (or a group created before by
           newusers), the GID of this group will be used as the primary group ID for the user.

           If this field is a number, this number will be used as the primary group ID of the
           user. If no groups exist with this GID, a new group will be created with this GID, and
           the name of the user.

           If this field is empty, a new group will be created with the name of the user and a
           GID will be automatically defined by newusers to be used as the primary group ID for
           the user and as the GID for the new group.

           If this field contains the name of a group which does not exist (and was not created
           before by newusers), a new group will be created with the specified name and a GID
           will be automatically defined by newusers to be used as the primary group ID for the
           user and GID for the new group.

       pw_gecos
           This field is copied in the GECOS field of the user.

       pw_dir
           This field is used to define the home directory of the user.

           If this field does not specify an existing directory, the specified directory is
           created, with ownership set to the user being created or updated and its primary
           group. Note that newusers does not create parent directories of the new user's home
           directory. The newusers command will fail to create the home directory if the parent
           directories do not exist, and will send a message to stderr informing the user of the
           failure. The newusers command will not halt or return a failure to the calling shell
           if it fails to create the home directory, it will continue to process the batch of new
           users specified.

           If the home directory of an existing user is changed, newusers does not move or copy
           the content of the old directory to the new location. This should be done manually.

       pw_shell
           This field defines the shell of the user. No checks are performed on this field.

       newusers first tries to create or change all the specified users, and then write these
       changes to the user or group databases. If an error occurs (except in the final writes to
       the databases), no changes are committed to the databases.

       During this first pass, users are created with a locked password (and passwords are not
       changed for the users which are not created). A second pass is used to update the
       passwords using PAM. Failures to update a password are reported, but will not stop the
       other password updates.

       This command is intended to be used in a large system environment where many accounts are
       updated at a single time.

OPTIONS

       The options which apply to the newusers command are:

       --badname
           Allow names that do not conform to standards.

       -h, --help
           Display help message and exit.

       -r, --system
           Create a system account.

           System users will be created with no aging information in /etc/shadow, and their
           numeric identifiers are chosen in the SYS_UID_MIN-SYS_UID_MAX range, defined in
           login.defs, instead of UID_MIN-UID_MAX (and their GID counterparts for the creation of
           groups).

       -R, --root CHROOT_DIR
           Apply changes in the CHROOT_DIR directory and use the configuration files from the
           CHROOT_DIR directory. Only absolute paths are supported.

CAVEATS

       The input file must be protected since it contains unencrypted passwords.

CONFIGURATION

       The following configuration variables in /etc/login.defs change the behavior of this tool:

       GID_MAX (number), GID_MIN (number)
           Range of group IDs used for the creation of regular groups by useradd, groupadd, or
           newusers.

           The default value for GID_MIN (resp.  GID_MAX) is 1000 (resp. 60000).

       HOME_MODE (number)
           The mode for new home directories. If not specified, the UMASK is used to create the
           mode.

           useradd and newusers use this to set the mode of the home directory they create.

       MAX_MEMBERS_PER_GROUP (number)
           Maximum members per group entry. When the maximum is reached, a new group entry (line)
           is started in /etc/group (with the same name, same password, and same GID).

           The default value is 0, meaning that there are no limits in the number of members in a
           group.

           This feature (split group) permits to limit the length of lines in the group file.
           This is useful to make sure that lines for NIS groups are not larger than 1024
           characters.

           If you need to enforce such limit, you can use 25.

           Note: split groups may not be supported by all tools (even in the Shadow toolsuite).
           You should not use this variable unless you really need it.

       PASS_MAX_DAYS (number)
           The maximum number of days a password may be used. If the password is older than this,
           a password change will be forced. If not specified, -1 will be assumed (which disables
           the restriction).

       PASS_MIN_DAYS (number)
           The minimum number of days allowed between password changes. Any password changes
           attempted sooner than this will be rejected. If not specified, 0 will be assumed
           (which disables the restriction).

       PASS_WARN_AGE (number)
           The number of days warning given before a password expires. A zero means warning is
           given only upon the day of expiration, a value of -1 means no warning is given. If not
           specified, no warning will be provided.

       SUB_GID_MIN (number), SUB_GID_MAX (number), SUB_GID_COUNT (number)
           If /etc/subuid exists, the commands useradd and newusers (unless the user already have
           subordinate group IDs) allocate SUB_GID_COUNT unused group IDs from the range
           SUB_GID_MIN to SUB_GID_MAX for each new user.

           The default values for SUB_GID_MIN, SUB_GID_MAX, SUB_GID_COUNT are respectively
           100000, 600100000 and 65536.

       SUB_UID_MIN (number), SUB_UID_MAX (number), SUB_UID_COUNT (number)
           If /etc/subuid exists, the commands useradd and newusers (unless the user already have
           subordinate user IDs) allocate SUB_UID_COUNT unused user IDs from the range
           SUB_UID_MIN to SUB_UID_MAX for each new user.

           The default values for SUB_UID_MIN, SUB_UID_MAX, SUB_UID_COUNT are respectively
           100000, 600100000 and 65536.

       SYS_GID_MAX (number), SYS_GID_MIN (number)
           Range of group IDs used for the creation of system groups by useradd, groupadd, or
           newusers.

           The default value for SYS_GID_MIN (resp.  SYS_GID_MAX) is 101 (resp.  GID_MIN-1).

       SYS_UID_MAX (number), SYS_UID_MIN (number)
           Range of user IDs used for the creation of system users by useradd or newusers.

           The default value for SYS_UID_MIN (resp.  SYS_UID_MAX) is 101 (resp.  UID_MIN-1).

       UID_MAX (number), UID_MIN (number)
           Range of user IDs used for the creation of regular users by useradd or newusers.

           The default value for UID_MIN (resp.  UID_MAX) is 1000 (resp. 60000).

       UMASK (number)
           The file mode creation mask is initialized to this value. If not specified, the mask
           will be initialized to 022.

           useradd and newusers use this mask to set the mode of the home directory they create
           if HOME_MODE is not set.

           It is also used by pam_umask as the default umask value.

FILES

       /etc/passwd
           User account information.

       /etc/shadow
           Secure user account information.

       /etc/group
           Group account information.

       /etc/gshadow
           Secure group account information.

       /etc/login.defs
           Shadow password suite configuration.

       /etc/pam.d/newusers
           PAM configuration for newusers.

       /etc/subgid
           Per user subordinate group IDs.

       /etc/subuid
           Per user subordinate user IDs.

SEE ALSO

       login.defs(5), passwd(1), subgid(5), subuid(5), useradd(8).