Provided by: e2fsprogs_1.47.1-1ubuntu1_amd64 
NAME
tune2fs - adjust tunable file system parameters on ext2/ext3/ext4 file systems
SYNOPSIS
tune2fs [ -l ] [ -c max-mount-counts ] [ -e errors-behavior ] [ -f ] [ -i interval-between-checks ] [ -I
new_inode_size ] [ -j ] [ -J journal-options ] [ -m reserved-blocks-percentage ] [ -o [^]mount-
options[,...] ] [ -r reserved-blocks-count ] [ -u user ] [ -g group ] [ -C mount-count ] [ -E extended-
options ] [ -L volume-label ] [ -M last-mounted-directory ] [ -O [^]feature[,...] ] [ -Q quota-options ]
[ -T time-last-checked ] [ -U UUID ] [ -z undo_file ] device
DESCRIPTION
tune2fs allows the system administrator to adjust various tunable file system parameters on Linux ext2,
ext3, or ext4 file systems. The current values of these options can be displayed by using the -l option
to tune2fs(8) program, or by using the dumpe2fs(8) program.
The device specifier can either be a filename (i.e., /dev/sda1), or a LABEL or UUID specifier:
"LABEL=volume-label" or "UUID=uuid". (i.e., LABEL=home or UUID=e40486c6-84d5-4f2f-b99c-032281799c9d).
OPTIONS
-c max-mount-counts
Adjust the number of mounts after which the file system will be checked by e2fsck(8). If max-
mount-counts is the string "random", tune2fs will use a random value between 20 and 40. If max-
mount-counts is 0 or -1, the number of times the file system is mounted will be disregarded by
e2fsck(8) and the kernel.
Staggering the mount-counts at which file systems are forcibly checked will avoid all file systems
being checked at one time when using journaled file systems.
Mount-count-dependent checking is disabled by default to avoid unanticipated long reboots while
e2fsck does its work. If you are concerned about file system corruptions caused by potential
hardware problems of kernel bugs, a better solution than mount-count-dependent checking is to use
the e2scrub(8) program. This does require placing the file system on an LVM volume, however.
-C mount-count
Set the number of times the file system has been mounted. If set to a greater value than the max-
mount-counts parameter set by the -c option, e2fsck(8) will check the file system at the next
reboot.
-e error-behavior
Change the behavior of the kernel code when errors are detected. In all cases, a file system
error will cause e2fsck(8) to check the file system on the next boot. error-behavior can be one
of the following:
continue Continue normal execution.
remount-ro Remount file system read-only.
panic Cause a kernel panic.
-E extended-options
Set extended options for the file system. Extended options are comma separated, and may take an
argument using the equals ('=') sign. The following extended options are supported:
clear_mmp
Reset the MMP block (if any) back to the clean state. Use only if absolutely certain
the device is not currently mounted or being fscked, or major file system corruption
can result. Needs '-f'.
mmp_update_interval=interval
Adjust the initial MMP update interval to interval seconds. Specifying an interval of
0 means to use the default interval. The specified interval must be less than 300
seconds. Requires that the mmp feature be enabled.
stride=stride-size
Configure the file system for a RAID array with stride-size file system blocks. This
is the number of blocks read or written to disk before moving to next disk. This
mostly affects placement of file system metadata like bitmaps at mke2fs(2) time to
avoid placing them on a single disk, which can hurt the performance. It may also be
used by block allocator.
stripe_width=stripe-width
Configure the file system for a RAID array with stripe-width file system blocks per
stripe. This is typically be stride-size * N, where N is the number of data disks in
the RAID (e.g. RAID 5 N+1, RAID 6 N+2). This allows the block allocator to prevent
read-modify-write of the parity in a RAID stripe if possible when the data is written.
hash_alg=hash-alg
Set the default hash algorithm used for file systems with hashed b-tree directories.
Valid algorithms accepted are: legacy, half_md4, and tea.
encoding=encoding-name
Enable the casefold feature in the super block and set encoding-name as the encoding
to be used. If encoding-name is not specified, utf8 is used. The encoding cannot be
altered if casefold was previously enabled.
encoding_flags=encoding-flags
Define parameters for file name character encoding operations. If a flag is not
changed using this parameter, its default value is used. encoding-flags should be a
comma-separated lists of flags to be enabled. The flags cannot be altered if casefold
was previously enabled.
The only flag that can be set right now is strict which means that invalid strings
should be rejected by the file system. In the default configuration, the strict flag
is disabled.
mount_opts=mount_option_string
Set a set of default mount options which will be used when the file system is mounted.
Unlike the bitmask-based default mount options which can be specified with the -o
option, mount_option_string is an arbitrary string with a maximum length of 63 bytes,
which is stored in the superblock.
The ext4 file system driver will first apply the bitmask-based default options, and
then parse the mount_option_string, before parsing the mount options passed from the
mount(8) program.
This superblock setting is only honored in 2.6.35+ kernels; and not at all by the ext2
and ext3 file system drivers.
orphan_file_size=size
Set size of the file for tracking unlinked but still open inodes and inodes with
truncate in progress. Larger file allows for better scalability, reserving a few
blocks per cpu is ideal.
force_fsck
Set a flag in the file system superblock indicating that errors have been found. This
will force fsck to run at the next mount.
test_fs
Set a flag in the file system superblock indicating that it may be mounted using
experimental kernel code, such as the ext4dev file system.
^test_fs
Clear the test_fs flag, indicating the file system should only be mounted using
production-level file system code.
-f Force the tune2fs operation to complete even in the face of errors. This option is useful when
removing the has_journal file system feature from a file system which has an external journal (or
is corrupted such that it appears to have an external journal), but that external journal is not
available. If the file system appears to require journal replay, the -f flag must be specified
twice to proceed.
WARNING: Removing an external journal from a file system which was not cleanly unmounted without
first replaying the external journal can result in severe data loss and file system corruption.
-g group
Set the group which can use the reserved file system blocks. The group parameter can be a
numerical gid or a group name. If a group name is given, it is converted to a numerical gid
before it is stored in the superblock.
-i interval-between-checks[d|m|w]
Adjust the maximal time between two file system checks. No suffix or d will interpret the number
interval-between-checks as days, m as months, and w as weeks. A value of zero will disable the
time-dependent checking.
There are pros and cons to disabling these periodic checks; see the discussion under the -c
(mount-count-dependent check) option for details.
-I Change the inode size used by the file system. This requires rewriting the inode table, so it
requires that the file system is checked for consistency first using e2fsck(8). This operation
can also take a while and the file system can be corrupted and data lost if it is interrupted
while in the middle of converting the file system. Backing up the file system before changing
inode size is recommended.
File systems with an inode size of 128 bytes do not support timestamps beyond January 19, 2038.
Inodes which are 256 bytes or larger will support extended timestamps, project id's, and the
ability to store some extended attributes in the inode table for improved performance.
-j Add an ext3 journal to the file system. If the -J option is not specified, the default journal
parameters will be used to create an appropriately sized journal (given the size of the file
system) stored within the file system. Note that you must be using a kernel which has ext3
support in order to actually make use of the journal.
If this option is used to create a journal on a mounted file system, an immutable file, .journal,
will be created in the top-level directory of the file system, as it is the only safe way to
create the journal inode while the file system is mounted. While the ext3 journal is visible, it
is not safe to delete it, or modify it while the file system is mounted; for this reason the file
is marked immutable. While checking unmounted file systems, e2fsck(8) will automatically move
.journal files to the invisible, reserved journal inode. For all file systems except for the root
file system, this should happen automatically and naturally during the next reboot cycle. Since
the root file system is mounted read-only, e2fsck(8) must be run from a rescue floppy in order to
effect this transition.
On some distributions, such as Debian, if an initial ramdisk is used, the initrd scripts will
automatically convert an ext2 root file system to ext3 if the /etc/fstab file specifies the ext3
file system for the root file system in order to avoid requiring the use of a rescue floppy to add
an ext3 journal to the root file system.
-J journal-options
Override the default ext3 journal parameters. Journal options are comma separated, and may take an
argument using the equals ('=') sign. The following journal options are supported:
size=journal-size
Create a journal stored in the file system of size journal-size megabytes. The size
of the journal must be at least 1024 file system blocks (i.e., 1MB if using 1k blocks,
4MB if using 4k blocks, etc.) and may be no more than 10,240,000 file system blocks.
There must be enough free space in the file system to create a journal of that size.
fast_commit_size=fast-commit-size
Create an additional fast commit journal area of size fast-commit-size kilobytes.
This option is only valid if fast_commit feature is enabled on the file system. If
this option is not specified and if fast_commit feature is turned on, fast commit area
size defaults to journal-size / 64 megabytes. The total size of the journal with
fast_commit feature set is journal-size + ( fast-commit-size * 1024) megabytes. The
total journal size may be no more than 10,240,000 file system blocks or half the total
file system size (whichever is smaller).
location=journal-location
Specify the location of the journal. The argument journal-location can either be
specified as a block number, or if the number has a units suffix (e.g., 'M', 'G',
etc.) interpret it as the offset from the beginning of the file system.
device=external-journal
Attach the file system to the journal block device located on external-journal. The
external journal must have been already created using the command
mke2fs -O journal_dev external-journal
Note that external-journal must be formatted with the same block size as file systems
which will be using it. In addition, while there is support for attaching multiple
file systems to a single external journal, the Linux kernel and e2fsck(8) do not
currently support shared external journals yet.
Instead of specifying a device name directly, external-journal can also be specified
by either LABEL=label or UUID=UUID to locate the external journal by either the volume
label or UUID stored in the ext2 superblock at the start of the journal. Use
dumpe2fs(8) to display a journal device's volume label and UUID. See also the -L
option of tune2fs(8).
Only one of the size or device options can be given for a file system.
-l List the contents of the file system superblock, including the current values of the parameters
that can be set via this program.
-L volume-label
Set the volume label of the file system. Ext2 file system labels can be at most 16 characters
long; if volume-label is longer than 16 characters, tune2fs will truncate it and print a warning.
For other file systems that support online label manipulation and are mounted tune2fs will work as
well, but it will not attempt to truncate the volume-label at all. The volume label can be used
by mount(8), fsck(8), and /etc/fstab(5) (and possibly others) by specifying LABEL=volume-label
instead of a block special device name like /dev/hda5.
-m reserved-blocks-percentage
Set the percentage of the file system which may only be allocated by privileged processes.
Reserving some number of file system blocks for use by privileged processes is done to avoid file
system fragmentation, and to allow system daemons, such as syslogd(8), to continue to function
correctly after non-privileged processes are prevented from writing to the file system. Normally,
the default percentage of reserved blocks is 5%.
-M last-mounted-directory
Set the last-mounted directory for the file system.
-o [^]mount-option[,...]
Set or clear the indicated default mount options in the file system. Default mount options can be
overridden by mount options specified either in /etc/fstab(5) or on the command line arguments to
mount(8). Older kernels may not support this feature; in particular, kernels which predate 2.4.20
will almost certainly ignore the default mount options field in the superblock.
More than one mount option can be cleared or set by separating features with commas. Mount
options prefixed with a caret character ('^') will be cleared in the file system's superblock;
mount options without a prefix character or prefixed with a plus character ('+') will be added to
the file system.
The following mount options can be set or cleared using tune2fs:
debug Enable debugging code for this file system.
bsdgroups
Emulate BSD behavior when creating new files: they will take the group-id of the
directory in which they were created. The standard System V behavior is the default,
where newly created files take on the fsgid of the current process, unless the
directory has the setgid bit set, in which case it takes the gid from the parent
directory, and also gets the setgid bit set if it is a directory itself.
user_xattr
Enable user-specified extended attributes.
acl Enable Posix Access Control Lists.
uid16 Disables 32-bit UIDs and GIDs. This is for interoperability with older kernels which
only store and expect 16-bit values.
journal_data
When the file system is mounted with journaling enabled, all data (not just metadata)
is committed into the journal prior to being written into the main file system.
journal_data_ordered
When the file system is mounted with journaling enabled, all data is forced directly
out to the main file system prior to its metadata being committed to the journal.
journal_data_writeback
When the file system is mounted with journaling enabled, data may be written into the
main file system after its metadata has been committed to the journal. This may
increase throughput, however, it may allow old data to appear in files after a crash
and journal recovery.
nobarrier
The file system will be mounted with barrier operations in the journal disabled.
(This option is currently only supported by the ext4 file system driver in 2.6.35+
kernels.)
block_validity
The file system will be mounted with the block_validity option enabled, which causes
extra checks to be performed after reading or writing from the file system. This
prevents corrupted metadata blocks from causing file system damage by overwriting
parts of the inode table or block group descriptors. This comes at the cost of
increased memory and CPU overhead, so it is enabled only for debugging purposes.
(This option is currently only supported by the ext4 file system driver in 2.6.35+
kernels.)
discard
The file system will be mounted with the discard mount option. This will cause the
file system driver to attempt to use the trim/discard feature of some storage devices
(such as SSD's and thin-provisioned drives available in some enterprise storage
arrays) to inform the storage device that blocks belonging to deleted files can be
reused for other purposes. (This option is currently only supported by the ext4 file
system driver in 2.6.35+ kernels.)
nodelalloc
The file system will be mounted with the nodelalloc mount option. This will disable
the delayed allocation feature. (This option is currently only supported by the ext4
file system driver in 2.6.35+ kernels.)
-O [^]feature[,...]
Set or clear the indicated file system features (options) in the file system. More than one file
system feature can be cleared or set by separating features with commas. File System features
prefixed with a caret character ('^') will be cleared in the file system's superblock; file system
features without a prefix character or prefixed with a plus character ('+') will be added to the
file system. For a detailed description of the file system features, please see the man page
ext4(5).
The following file system features can be set or cleared using tune2fs:
64bit Enable the file system to be larger than 2^32 blocks.
casefold
Enable support for file system level casefolding. The option can be cleared only if
filesystem has no directories with F attribute.
dir_index
Use hashed b-trees to speed up lookups for large directories.
dir_nlink
Allow more than 65000 subdirectories per directory.
ea_inode
Allow the value of each extended attribute to be placed in the data blocks of a
separate inode if necessary, increasing the limit on the size and number of extended
attributes per file. Tune2fs currently only supports setting this file system
feature.
encrypt
Enable support for file system level encryption. Tune2fs currently only supports
setting this file system feature.
extent Enable the use of extent trees to store the location of data blocks in inodes.
Tune2fs currently only supports setting this file system feature.
extra_isize
Enable the extended inode fields used by ext4.
filetype
Store file type information in directory entries.
flex_bg
Allow bitmaps and inode tables for a block group to be placed anywhere on the storage
media. Tune2fs will not reorganize the location of the inode tables and allocation
bitmaps, as mke2fs(8) will do when it creates a freshly formatted file system with
flex_bg enabled.
has_journal
Use a journal to ensure file system consistency even across unclean shutdowns.
Setting the file system feature is equivalent to using the -j option.
fast_commit
Enable fast commit journaling feature to improve fsync latency.
large_dir
Increase the limit on the number of files per directory. Tune2fs currently only
supports setting this file system feature.
huge_file
Support files larger than 2 terabytes in size.
large_file
File System can contain files that are greater than 2GB.
metadata_csum
Store a checksum to protect the contents in each metadata block.
metadata_csum_seed
Allow the file system to store the metadata checksum seed in the superblock, enabling
the administrator to change the UUID of a file system using the metadata_csum feature
while it is mounted.
mmp Enable or disable multiple mount protection (MMP) feature.
project
Enable project ID tracking. This is used for project quota tracking.
quota Enable internal file system quota inodes.
read-only
Force the kernel to mount the file system read-only.
resize_inode
Reserve space so the block group descriptor table may grow in the future. Tune2fs
only supports clearing this file system feature.
sparse_super
Limit the number of backup superblocks to save space on large file systems. Tune2fs
currently only supports setting this file system feature.
stable_inodes
Prevent the file system from being shrunk or having its UUID changed, in order to
allow the use of specialized encryption settings that make use of the inode numbers
and UUID. Tune2fs currently only supports setting this file system feature.
uninit_bg
Allow the kernel to initialize bitmaps and inode tables lazily, and to keep a high
watermark for the unused inodes in a file system, to reduce e2fsck(8) time. The first
e2fsck run after enabling this feature will take the full time, but subsequent e2fsck
runs will take only a fraction of the original time, depending on how full the file
system is.
verity Enable support for verity protected files. Tune2fs currently only supports setting
this file system feature.
After setting or clearing sparse_super, uninit_bg, filetype, or resize_inode file system features,
the file system may require being checked using e2fsck(8) to return the file system to a
consistent state. Tune2fs will print a message requesting that the system administrator run
e2fsck(8) if necessary. After setting the dir_index feature, e2fsck -D can be run to convert
existing directories to the hashed B-tree format. Enabling certain file system features may
prevent the file system from being mounted by kernels which do not support those features. In
particular, the uninit_bg and flex_bg features are only supported by the ext4 file system.
-r reserved-blocks-count
Set the number of reserved file system blocks.
-Q quota-options
Sets 'quota' feature on the superblock and works on the quota files for the given quota type.
Quota options could be one or more of the following:
[^]usrquota
Sets/clears user quota inode in the superblock.
[^]grpquota
Sets/clears group quota inode in the superblock.
[^]prjquota
Sets/clears project quota inode in the superblock.
-T time-last-checked
Set the time the file system was last checked using e2fsck. The time is interpreted using the
current (local) timezone. This can be useful in scripts which use a Logical Volume Manager to
make a consistent snapshot of a file system, and then check the file system during off hours to
make sure it hasn't been corrupted due to hardware problems, etc. If the file system was clean,
then this option can be used to set the last checked time on the original file system. The format
of time-last-checked is the international date format, with an optional time specifier, i.e.
YYYYMMDD[HH[MM[SS]]]. The keyword now is also accepted, in which case the last checked time will
be set to the current time.
-u user
Set the user who can use the reserved file system blocks. user can be a numerical uid or a user
name. If a user name is given, it is converted to a numerical uid before it is stored in the
superblock.
-U UUID
Set the universally unique identifier (UUID) of the file system to UUID. The format of the UUID
is a series of hex digits separated by hyphens, like this: "c1b9d5a2-f162-11cf-9ece-0020afc76f16".
The UUID parameter may also be one of the following:
clear clear the file system UUID
random generate a new randomly-generated UUID
time generate a new time-based UUID
The UUID may be used by mount(8), fsck(8), and /etc/fstab(5) (and possibly others) by specifying
UUID=uuid instead of a block special device name like /dev/hda1.
See uuidgen(8) for more information. If the system does not have a good random number generator
such as /dev/random or /dev/urandom, tune2fs will automatically use a time-based UUID instead of a
randomly-generated UUID.
-z undo_file
Before overwriting a file system block, write the old contents of the block to an undo file. This
undo file can be used with e2undo(8) to restore the old contents of the file system should
something go wrong. If the empty string is passed as the undo_file argument, the undo file will
be written to a file named tune2fs-device.e2undo in the directory specified via the
E2FSPROGS_UNDO_DIR environment variable.
WARNING: The undo file cannot be used to recover from a power or system crash.
BUGS
We haven't found any bugs yet. That doesn't mean there aren't any...
AUTHOR
tune2fs was written by Remy Card <Remy.Card@linux.org>. It is currently being maintained by Theodore Ts'o <tytso@alum.mit.edu>. tune2fs uses the ext2fs library written by Theodore Ts'o <tytso@mit.edu>. This manual page was written by Christian Kuhtz <chk@data-hh.Hanse.DE>. Time-dependent checking was added by Uwe Ohse <uwe@tirka.gun.de>.
AVAILABILITY
tune2fs is part of the e2fsprogs package and is available from http://e2fsprogs.sourceforge.net.
SEE ALSO
debugfs(8), dumpe2fs(8), e2fsck(8), mke2fs(8), ext4(5)