Provided by: ldap-utils_2.6.8+dfsg-1~exp4ubuntu1_amd64 bug

NAME

       ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools

SYNOPSIS

       ldapmodify  [-V[V]]  [-d debuglevel]  [-n]  [-v] [-a] [-c] [-f file] [-j lineno] [-S file]
       [-M[M]]  [-x]  [-D binddn]  [-W]  [-w passwd]  [-y passwdfile]   [-H ldapuri]   [-P {2|3}]
       [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]] [-O security-properties]
       [-I] [-Q] [-N] [-U authcid] [-R realm] [-X authzid] [-Y mech] [-Z[Z]]

       ldapadd [-V[V]] [-d debuglevel] [-n] [-v] [-c]  [-f file]  [-j lineno]  [-S file]  [-M[M]]
       [-x]    [-D binddn]    [-W]    [-w passwd]    [-y passwdfile]    [-H ldapuri]   [-P {2|3}]
       [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]] [-O security-properties]
       [-I] [-Q] [-N] [-U authcid] [-R realm] [-X authzid] [-Y mech] [-Z[Z]]

DESCRIPTION

       ldapmodify  is  a  shell-accessible  interface to the ldap_add_ext(3), ldap_modify_ext(3),
       ldap_delete_ext(3) and ldap_rename(3).  library calls.  ldapadd is implemented as  a  hard
       link  to  the  ldapmodify  tool.   When  invoked as ldapadd the -a (add new entry) flag is
       turned on automatically.

       ldapmodify opens a connection to an LDAP server, binds, and modifies or adds entries.  The
       entry  information  is  read  from  standard  input or from file through the use of the -f
       option.

OPTIONS

       -V[V]  Print version info.  If -VV is given, only the version information is printed.

       -d debuglevel
              Set the LDAP debugging level to  debuglevel.   ldapmodify  must  be  compiled  with
              LDAP_DEBUG defined for this option to have any effect.

       -n     Show  what  would be done, but don't actually modify entries.  Useful for debugging
              in conjunction with -v.

       -v     Use verbose mode, with many diagnostics written to standard output.

       -a     Add new entries.  The default for ldapmodify is to  modify  existing  entries.   If
              invoked as ldapadd, this flag is always set.

       -c     Continuous  operation mode.  Errors are reported, but ldapmodify will continue with
              modifications.  The default is to exit after reporting an error.

       -f file
              Read the entry modification information from file instead of from standard input.

       -j lineno
              Jump to the specified line number in the LDIF file before processing  any  entries.
              This  allows  a load that was aborted due to errors in the input LDIF to be resumed
              after the errors are corrected.

       -S file
              Add or change records which were skipped due to an error are written  to  file  and
              the  error  message  returned  by  the server is added as a comment. Most useful in
              conjunction with -c.

       -M[M]  Enable manage DSA IT control.  -MM makes control critical.

       -x     Use simple authentication instead of SASL.

       -D binddn
              Use the Distinguished Name binddn to bind to the LDAP directory.  For  SASL  binds,
              the server is expected to ignore this value.

       -W     Prompt  for simple authentication.  This is used instead of specifying the password
              on the command line.

       -w passwd
              Use passwd as the password for simple authentication.

       -y passwdfile
              Use complete contents of passwdfile as the password for simple authentication.

       -H ldapuri
              Specify URI(s) referring to the ldap server(s); only the protocol/host/port  fields
              are allowed; a list of URI, separated by whitespace or commas is expected.

       -P {2|3}
              Specify the LDAP protocol version to use.

       -e [!]ext[=extparam]

       -E [!]ext[=extparam]

              Specify  general  extensions  with -e and modify extensions with -E.  ´!´ indicates
              criticality.

              General extensions:
                [!]assert=<filter>    (an RFC 4515 Filter)
                !authzid=<authzid>    ("dn:<dn>" or "u:<user>")
                [!]bauthzid           (RFC 3829 authzid control)
                [!]chaining[=<resolve>[/<cont>]]
                [!]manageDSAit
                [!]noop
                ppolicy
                [!]postread[=<attrs>] (a comma-separated attribute list)
                [!]preread[=<attrs>]  (a comma-separated attribute list)
                [!]relax
                sessiontracking[=<username>]
                abandon,cancel,ignore (SIGINT sends abandon/cancel,
                or ignores response; if critical, doesn't wait for SIGINT.
                not really controls)

              Modify extensions:
                [!]txn[=abort|commit]

       -o opt[=optparam]]

              Specify any ldap.conf(5) option or one of the following:
                nettimeout=<timeout>  (in seconds, or "none" or "max")
                ldif_wrap=<width>     (in columns, or "no" for no wrapping)

       -O security-properties
              Specify SASL security properties.

       -I     Enable SASL Interactive mode.  Always prompt.  Default is to prompt only as needed.

       -Q     Enable SASL Quiet mode.  Never prompt.

       -N     Do not use reverse DNS to canonicalize SASL host name.

       -U authcid
              Specify the authentication ID for SASL bind. The form of  the  ID  depends  on  the
              actual SASL mechanism used.

       -R realm
              Specify the realm of authentication ID for SASL bind. The form of the realm depends
              on the actual SASL mechanism used.

       -X authzid
              Specify the requested authorization ID for SASL bind.  authzid must be one  of  the
              following formats: dn:<distinguished name> or u:<username>

       -Y mech
              Specify  the  SASL  mechanism to be used for authentication. If it's not specified,
              the program will choose the best mechanism the server knows.

       -Z[Z]  Issue StartTLS (Transport Layer Security) extended operation. If you use  -ZZ,  the
              command will require the operation to be successful.

INPUT FORMAT

       The  contents  of file (or standard input if no -f flag is given on the command line) must
       conform to the format defined in ldif(5) (LDIF as defined in RFC 2849).

EXAMPLES

       Assuming that the file /tmp/entrymods exists and has the contents:

           dn: cn=Modify Me,dc=example,dc=com
           changetype: modify
           replace: mail
           mail: modme@example.com
           -
           add: title
           title: Grand Poobah
           -
           add: jpegPhoto
           jpegPhoto:< file:///tmp/modme.jpeg
           -
           delete: description
           -

       the command:

           ldapmodify -f /tmp/entrymods

       will replace the contents of the  "Modify  Me"  entry's  mail  attribute  with  the  value
       "modme@example.com",  add  a  title  of  "Grand  Poobah",  and  the  contents  of the file
       "/tmp/modme.jpeg" as a jpegPhoto, and completely remove the description attribute.

       Assuming that the file /tmp/newentry exists and has the contents:

           dn: cn=Barbara Jensen,dc=example,dc=com
           objectClass: person
           cn: Barbara Jensen
           cn: Babs Jensen
           sn: Jensen
           title: the world's most famous mythical manager
           mail: bjensen@example.com
           uid: bjensen

       the command:

           ldapadd -f /tmp/newentry

       will add a new entry for Babs Jensen, using the values from the file /tmp/newentry.

       Assuming that the file /tmp/entrymods exists and has the contents:

           dn: cn=Barbara Jensen,dc=example,dc=com
           changetype: delete

       the command:

           ldapmodify -f /tmp/entrymods

       will remove Babs Jensen's entry.

DIAGNOSTICS

       Exit status is zero if no errors occur.  Errors result in a non-zero  exit  status  and  a
       diagnostic message being written to standard error.

SEE ALSO

       ldapadd(1),    ldapdelete(1),   ldapmodrdn(1),   ldapsearch(1),   ldap.conf(5),   ldap(3),
       ldap_add_ext(3), ldap_delete_ext(3), ldap_modify_ext(3), ldap_modrdn_ext(3), ldif(5).

AUTHOR

       The OpenLDAP Project <http://www.openldap.org/>

ACKNOWLEDGEMENTS

       OpenLDAP   Software   is   developed   and   maintained   by    The    OpenLDAP    Project
       <http://www.openldap.org/>.   OpenLDAP Software is derived from the University of Michigan
       LDAP 3.3 Release.