Provided by: winbind_4.20.4+dfsg-1ubuntu1_amd64 
NAME
ntlm_auth - tool to allow external access to Winbind's NTLM authentication function
SYNOPSIS
ntlm_auth
DESCRIPTION
This tool is part of the samba(7) suite.
ntlm_auth is a helper utility that authenticates users using NT/LM authentication. It
returns 0 if the users is authenticated successfully and 1 if access was denied. ntlm_auth
uses winbind to access the user and authentication data for a domain. This utility is only
intended to be used by other programs (currently Squid and mod_ntlm_winbind).
OPERATIONAL REQUIREMENTS
The winbindd(8) daemon must be operational for many of these commands to function.
Some of these commands also require access to the directory winbindd_privileged in
$LOCKDIR. This should be done either by running this command as root or providing group
access to the winbindd_privileged directory. For security reasons, this directory should
not be world-accessable.
OPTIONS
--helper-protocol=PROTO
Operate as a stdio-based helper. Valid helper protocols are:
squid-2.4-basic
Server-side helper for use with Squid 2.4's basic (plaintext) authentication.
squid-2.5-basic
Server-side helper for use with Squid 2.5's basic (plaintext) authentication.
squid-2.5-ntlmssp
Server-side helper for use with Squid 2.5's NTLMSSP authentication.
Requires access to the directory winbindd_privileged in $LOCKDIR. The protocol
used is described here:
http://devel.squid-cache.org/ntlm/squid_helper_protocol.html. This protocol has
been extended to allow the NTLMSSP Negotiate packet to be included as an argument
to the YR command. (Thus avoiding loss of information in the protocol exchange).
ntlmssp-client-1
Client-side helper for use with arbitrary external programs that may wish to use
Samba's NTLMSSP authentication knowledge.
This helper is a client, and as such may be run by any user. The protocol used is
effectively the reverse of the previous protocol. A YR command (without any
arguments) starts the authentication exchange.
gss-spnego
Server-side helper that implements GSS-SPNEGO. This uses a protocol that is almost
the same as squid-2.5-ntlmssp, but has some subtle differences that are
undocumented outside the source at this stage.
Requires access to the directory winbindd_privileged in $LOCKDIR.
gss-spnego-client
Client-side helper that implements GSS-SPNEGO. This also uses a protocol similar
to the above helpers, but is currently undocumented.
ntlm-server-1
Server-side helper protocol, intended for use by a RADIUS server or the 'winbind'
plugin for pppd, for the provision of MSCHAP and MSCHAPv2 authentication.
This protocol consists of lines in the form: Parameter: value and Parameter::
Base64-encode value. The presence of a single period . indicates that one side
has finished supplying data to the other. (Which in turn could cause the helper to
authenticate the user).
Currently implemented parameters from the external program to the helper are:
Username
The username, expected to be in Samba's unix charset.
Examples:
Username: bob
Username:: Ym9i
NT-Domain
The user's domain, expected to be in Samba's unix charset.
Examples:
NT-Domain: WORKGROUP
NT-Domain:: V09SS0dST1VQ
Full-Username
The fully qualified username, expected to be in Samba's unix charset and
qualified with the winbind separator.
Examples:
Full-Username: WORKGROUP\bob
Full-Username:: V09SS0dST1VQYm9i
LANMAN-Challenge
The 8 byte LANMAN Challenge value, generated randomly by the server, or (in
cases such as MSCHAPv2) generated in some way by both the server and the
client.
Examples:
LANMAN-Challenge: 0102030405060708
LANMAN-Response
The 24 byte LANMAN Response value, calculated from the user's password and the
supplied LANMAN Challenge. Typically, this is provided over the network by a
client wishing to authenticate.
Examples:
LANMAN-Response: 0102030405060708090A0B0C0D0E0F101112131415161718
NT-Response
The >= 24 byte NT Response calculated from the user's password and the
supplied LANMAN Challenge. Typically, this is provided over the network by a
client wishing to authenticate.
Examples:
NT-Response: 0102030405060708090A0B0C0D0E0F10111213141516171
Password
The user's password. This would be provided by a network client, if the helper
is being used in a legacy situation that exposes plaintext passwords in this
way.
Examples:
Password: samba2
Password:: c2FtYmEy
Request-User-Session-Key
Upon successful authentication, return the user session key associated with
the login.
Examples:
Request-User-Session-Key: Yes
Request-LanMan-Session-Key
Upon successful authentication, return the LANMAN session key associated with
the login.
Examples:
Request-LanMan-Session-Key: Yes
Warning
Implementers should take care to base64 encode any data (such as
usernames/passwords) that may contain malicious user data, such as a newline. They
may also need to decode strings from the helper, which likewise may have been
base64 encoded.
--username=USERNAME
Specify username of user to authenticate
--domain=DOMAIN
Specify domain of user to authenticate
--workstation=WORKSTATION
Specify the workstation the user authenticated from
--challenge=STRING
NTLM challenge (in HEXADECIMAL)
--lm-response=RESPONSE
LM Response to the challenge (in HEXADECIMAL)
--nt-response=RESPONSE
NT or NTLMv2 Response to the challenge (in HEXADECIMAL)
--password=PASSWORD
User's plaintext password
If not specified on the command line, this is prompted for when required.
For the NTLMSSP based server roles, this parameter specifies the expected password,
allowing testing without winbindd operational.
--request-lm-key
Retrieve LM session key
--request-nt-key
Request NT key
--diagnostics
Perform Diagnostics on the authentication chain. Uses the password from --password or
prompts for one.
--require-membership-of={SID|Name}
Require that a user be a member of specified group (either name or SID) for
authentication to succeed.
--pam-winbind-conf=FILENAME
Define the path to the pam_winbind.conf file.
--target-hostname=HOSTNAME
Define the target hostname.
--target-service=SERVICE
Define the target service.
--use-cached-creds
Whether to use credentials cached by winbindd.
--allow-mschapv2
Explicitly allow MSCHAPv2.
--offline-logon
Allow offline logons for plain text auth.
-?|--help
Print a summary of command line options.
--usage
Display brief usage message.
-d|--debuglevel=DEBUGLEVEL
level is an integer from 0 to 10. The default value if this parameter is not specified
is 1 for client applications.
The higher this value, the more detail will be logged to the log files about the
activities of the server. At level 0, only critical errors and serious warnings will
be logged. Level 1 is a reasonable level for day-to-day running - it generates a small
amount of information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and should only be used
when investigating a problem. Levels above 3 are designed for use only by developers
and generate HUGE amounts of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the log level parameter in the
/etc/samba/smb.conf file.
--debug-stdout
This will redirect debug output to STDOUT. By default all clients are logging to
STDERR.
--configfile=<configuration file>
The file specified contains the configuration details required by the client. The
information in this file can be general for client and server or only provide client
specific like options such as client smb encrypt. See /etc/samba/smb.conf for more
information. The default configuration file name is determined at compile time.
--option=<name>=<value>
Set the smb.conf(5) option "<name>" to value "<value>" from the command line. This
overrides compiled-in defaults and options read from the configuration file. If a name
or a value includes a space, wrap whole --option=name=value into quotes.
-V|--version
Prints the program version number.
EXAMPLE SETUP
To setup ntlm_auth for use by squid 2.5, with both basic and NTLMSSP authentication, the
following should be placed in the squid.conf file.
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
auth_param basic children 5
auth_param basic realm Squid proxy-caching web server
auth_param basic credentialsttl 2 hours
Note
This example assumes that ntlm_auth has been installed into your path, and that the
group permissions on winbindd_privileged are as described above.
To setup ntlm_auth for use by squid 2.5 with group limitation in addition to the above
example, the following should be added to the squid.conf file.
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUP\Domain Users'
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUP\Domain Users'
TROUBLESHOOTING
If you're experiencing problems with authenticating Internet Explorer running under MS
Windows 9X or Millennium Edition against ntlm_auth's NTLMSSP authentication helper
(--helper-protocol=squid-2.5-ntlmssp), then please read the Microsoft Knowledge Base
article #239869 and follow instructions described there.
VERSION
This man page is part of version 4.20.4-Ubuntu-4.20.4+dfsg-1ubuntu1 of the Samba suite.
AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba
is now developed by the Samba Team as an Open Source project similar to the way the Linux
kernel is developed.
The ntlm_auth manpage was written by Jelmer Vernooij and Andrew Bartlett.