Provided by: manpages-dev_6.8-2_all bug

NAME

       io_submit - submit asynchronous I/O blocks for processing

LIBRARY

       Standard C library (libc, -lc)

       Alternatively, Asynchronous I/O library (libaio, -laio); see VERSIONS.

SYNOPSIS

       #include <linux/aio_abi.h>          /* Defines needed types */

       int io_submit(aio_context_t ctx_id, long nr, struct iocb **iocbpp);

       Note: There is no glibc wrapper for this system call; see VERSIONS.

DESCRIPTION

       Note:  this  page  describes  the  raw  Linux system call interface.  The wrapper function
       provided by libaio uses a different type for the ctx_id argument.  See VERSIONS.

       The io_submit() system call queues nr I/O request blocks for processing in the AIO context
       ctx_id.   The  iocbpp  argument should be an array of nr AIO control blocks, which will be
       submitted to context ctx_id.

       The iocb (I/O control block) structure defined in linux/aio_abi.h defines  the  parameters
       that control the I/O operation.

           #include <linux/aio_abi.h>

           struct iocb {
               __u64   aio_data;
               __u32   PADDED(aio_key, aio_rw_flags);
               __u16   aio_lio_opcode;
               __s16   aio_reqprio;
               __u32   aio_fildes;
               __u64   aio_buf;
               __u64   aio_nbytes;
               __s64   aio_offset;
               __u64   aio_reserved2;
               __u32   aio_flags;
               __u32   aio_resfd;
           };

       The fields of this structure are as follows:

       aio_data
              This  data  is  copied  into  the  data  field  of  the io_event structure upon I/O
              completion (see io_getevents(2)).

       aio_key
              This is an internal field used by the kernel.  Do not modify this  field  after  an
              io_submit() call.

       aio_rw_flags
              This defines the R/W flags passed with structure.  The valid values are:

              RWF_APPEND (since Linux 4.16)
                     Append  data to the end of the file.  See the description of the flag of the
                     same name in pwritev2(2) as well as the description of O_APPEND in  open(2).
                     The aio_offset field is ignored.  The file offset is not changed.

              RWF_DSYNC (since Linux 4.13)
                     Write  operation  complete according to requirement of synchronized I/O data
                     integrity.  See the description of the flag of the same name in  pwritev2(2)
                     as well the description of O_DSYNC in open(2).

              RWF_HIPRI (since Linux 4.13)
                     High priority request, poll if possible

              RWF_NOWAIT (since Linux 4.14)
                     Don't  wait  if  the  I/O  will  block  for  operations  such  as file block
                     allocations, dirty page flush, mutex locks,  or  a  congested  block  device
                     inside the kernel.  If any of these conditions are met, the control block is
                     returned immediately with a return value of -EAGAIN in the res field of  the
                     io_event structure (see io_getevents(2)).

              RWF_SYNC (since Linux 4.13)
                     Write  operation  complete according to requirement of synchronized I/O file
                     integrity.  See the description of the flag of the same name in  pwritev2(2)
                     as well the description of O_SYNC in open(2).

       aio_lio_opcode
              This  defines  the  type  of  I/O to be performed by the iocb structure.  The valid
              values are defined by the enum defined in linux/aio_abi.h:

                  enum {
                      IOCB_CMD_PREAD = 0,
                      IOCB_CMD_PWRITE = 1,
                      IOCB_CMD_FSYNC = 2,
                      IOCB_CMD_FDSYNC = 3,
                      IOCB_CMD_POLL = 5,
                      IOCB_CMD_NOOP = 6,
                      IOCB_CMD_PREADV = 7,
                      IOCB_CMD_PWRITEV = 8,
                  };

       aio_reqprio
              This defines the requests priority.

       aio_fildes
              The file descriptor on which the I/O operation is to be performed.

       aio_buf
              This is the buffer used to transfer data for a read or write operation.

       aio_nbytes
              This is the size of the buffer pointed to by aio_buf.

       aio_offset
              This is the file offset at which the I/O operation is to be performed.

       aio_flags
              This is the set of flags associated with the iocb structure.  The valid values are:

              IOCB_FLAG_RESFD
                     Asynchronous I/O control  must  signal  the  file  descriptor  mentioned  in
                     aio_resfd upon completion.

              IOCB_FLAG_IOPRIO (since Linux 4.18)
                     Interpret   the   aio_reqprio   field  as  an  IOPRIO_VALUE  as  defined  by
                     linux/ioprio.h.

       aio_resfd
              The file descriptor to signal in the event of asynchronous I/O completion.

RETURN VALUE

       On success, io_submit() returns the number of iocbs submitted (which may be less than  nr,
       or 0 if nr is zero).  For the failure return, see VERSIONS.

ERRORS

       EAGAIN Insufficient resources are available to queue any iocbs.

       EBADF  The file descriptor specified in the first iocb is invalid.

       EFAULT One of the data structures points to invalid data.

       EINVAL The  AIO  context  specified by ctx_id is invalid.  nr is less than 0.  The iocb at
              *iocbpp[0] is not properly initialized, the operation specified is invalid for  the
              file descriptor in the iocb, or the value in the aio_reqprio field is invalid.

       ENOSYS io_submit() is not implemented on this architecture.

       EPERM  The  aio_reqprio  field  is  set with the class IOPRIO_CLASS_RT, but the submitting
              context does not have the CAP_SYS_ADMIN capability.

VERSIONS

       glibc does not provide a wrapper  for  this  system  call.   You  could  invoke  it  using
       syscall(2).   But  instead,  you  probably  want  to  use the io_submit() wrapper function
       provided by libaio.

       Note that the libaio wrapper function uses a different type (io_context_t) for the  ctx_id
       argument.   Note  also  that  the  libaio  wrapper  does  not  follow  the usual C library
       conventions for indicating errors: on  error  it  returns  a  negated  error  number  (the
       negative  of  one  of  the  values  listed  in ERRORS).  If the system call is invoked via
       syscall(2), then the return value follows the usual conventions for indicating  an  error:
       -1, with errno set to a (positive) value that indicates the error.

STANDARDS

       Linux.

HISTORY

       Linux 2.5.

SEE ALSO

       io_cancel(2), io_destroy(2), io_getevents(2), io_setup(2), aio(7)