oracular (3) App::Yath::Options::Runner.3pm.gz
NAME
App::Yath::Options::Runner - Runner options for Yath.
DESCRIPTION
This is where command line options for the runner are defined.
PROVIDED OPTIONS
COMMAND OPTIONS
Runner Options
--abort-on-bail
--no-abort-on-bail
Abort all testing if a bail-out is encountered (default: on)
--blib
-b
--no-blib
(Default: include if it exists) Include 'blib/lib' and 'blib/arch' in your module path
--cover
--cover=-silent,1,+ignore,^t/,+ignore,^t2/,+ignore,^xt,+ignore,^test.pl
--no-cover
Use Devel::Cover to calculate test coverage. This disables forking. If no args are specified the
following are used: -silent,1,+ignore,^t/,+ignore,^t2/,+ignore,^xt,+ignore,^test.pl
--dump-depmap
--no-dump-depmap
When using staged preload, dump the depmap for each stage as json files
--event-timeout SECONDS
--et SECONDS
--no-event-timeout
Kill test if no output is received within timeout period. (Default: 60 seconds). Add the "# HARNESS-
NO-TIMEOUT" comment to the top of a test file to disable timeouts on a per-test basis. This prevents
a hung test from running forever.
--include ARG
--include=ARG
-I ARG
-I=ARG
--no-include
Add a directory to your include paths
Can be specified multiple times
--job-count 4
--job-count 8:2
--jobs 4
--jobs 8:2
-j4
-j8:2
--no-job-count
Set the number of concurrent jobs to run. Add a :# if you also wish to designate multiple slots per
test. 8:2 means 8 slots, but each test gets 2 slots, so 4 tests run concurrently. Tests can find
their concurrency assignemnt in the "T2_HARNESS_MY_JOB_CONCURRENCY" environment variable.
Can also be set with the following environment variables: "YATH_JOB_COUNT", "T2_HARNESS_JOB_COUNT",
"HARNESS_JOB_COUNT"
--lib
-l
--no-lib
(Default: include if it exists) Include 'lib' in your module path
--nytprof
--no-nytprof
Use Devel::NYTProf on tests. This will set addpid=1 for you. This works with or without fork.
--post-exit-timeout SECONDS
--pet SECONDS
--no-post-exit-timeout
Stop waiting post-exit after the timeout period. (Default: 15 seconds) Some tests fork and allow the
parent to exit before writing all their output. If Test2::Harness detects an incomplete plan after
the test exits it will monitor for more events until the timeout period. Add the "# HARNESS-NO-
TIMEOUT" comment to the top of a test file to disable timeouts on a per-test basis.
--preload-threshold ARG
--preload-threshold=ARG
--Pt ARG
--Pt=ARG
-W ARG
-W=ARG
--no-preload-threshold
Only do preload if at least N tests are going to be run. In some cases a full preload takes longer
than simply running the tests, this lets you specify a minimum number of test jobs that will be run
for preload to happen. This has no effect for a persistent runner. The default is 0, and it means
always preload.
--preloads ARG
--preloads=ARG
--preload ARG
--preload=ARG
-P ARG
-P=ARG
--no-preloads
Preload a module before running tests
Can be specified multiple times
--resource Port
--resource +Test2::Harness::Runner::Resource::Port
-R Port
--no-resource
Use a resource module to assign resource assignments to individual tests
Can be specified multiple times
--runner-id ARG
--runner-id=ARG
--no-runner-id
Runner ID (usually a generated uuid)
--shared-jobs-config .sharedjobslots.yml
--shared-jobs-config relative/path/.sharedjobslots.yml
--shared-jobs-config /absolute/path/.sharedjobslots.yml
--no-shared-jobs-config
Where to look for a shared slot config file. If a filename with no path is provided yath will search
the current and all parent directories for the name.
--slots-per-job 2
-x2
--no-slots-per-job
This sets the number of slots each job will use (default 1). This is normally set by the ':#' in
'-j#:#'.
Can also be set with the following environment variables: "T2_HARNESS_JOB_CONCURRENCY"
--switch ARG
--switch=ARG
-S ARG
-S=ARG
--no-switch
Pass the specified switch to perl for each test. This is not compatible with preload.
Can be specified multiple times
--tlib
--no-tlib
(Default: off) Include 't/lib' in your module path
--unsafe-inc
--no-unsafe-inc
perl is removing '.' from @INC as a security concern. This option keeps things from breaking for now.
Can also be set with the following environment variables: "PERL_USE_UNSAFE_INC"
--use-fork
--fork
--no-use-fork
(default: on, except on windows) Normally tests are run by forking, which allows for features like
preloading. This will turn off the behavior globally (which is not compatible with preloading). This
is slower, it is better to tag misbehaving tests with the '# HARNESS-NO-PRELOAD' comment in their
header to disable forking only for those tests.
Can also be set with the following environment variables: "!T2_NO_FORK", "T2_HARNESS_FORK",
"!T2_HARNESS_NO_FORK", "YATH_FORK", "!YATH_NO_FORK"
--use-timeout
--timeout
--no-use-timeout
(default: on) Enable/disable timeouts
SOURCE
The source code repository for Test2-Harness can be found at http://github.com/Test-More/Test2-Harness/.
MAINTAINERS
Chad Granum <exodist@cpan.org>
AUTHORS
Chad Granum <exodist@cpan.org>
COPYRIGHT
Copyright 2020 Chad Granum <exodist7@gmail.com>. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See http://dev.perl.org/licenses/