oracular (3) CLI::Framework::Tutorial.3pm.gz
NAME
CLI::Framework::Tutorial - "HOWTO" develop CLIF applications using best practices
CLIF DOCUMENTATION
This is a guide to developing CLIF applications. It is a supplement to the documentation in
CLI::Framework, CLI::Framework::Application and CLI::Framework::Command, which have more thorough
coverage of some finer points.
It is suggested that new users start by reading this document, then use the other documentation for
reference as necessary.
INTRODUCTION
Developers have been reluctantly writing ad-hoc, disposable scripts for too long or struggling to decide
how not to do so. There is a better alternative.
The CLI::Framework documentation enumerates many advantages to using CLIF instead of writing yet-another-
getopt-based-script. CLIF comes with a lot of documentation, but don't take that to mean that using CLIF
is complicated. CLIF apps with simple needs are very easy to build. Apps with complex needs are a bit
more work, but much easier to build (and far easier to test and maintain) than doing that work from
scratch.
This document will first demonstrate a very simple CLIF application. Next, a complete application will
be shown to demonstrate more advanced CLIF features.
Think of a typical command-line script. It needs to parse command-line options and arguments, check that
any required external resources (files, databases, etc.) are available, fail nicely if something is
missing or inconsistent, then do something application-specific that depends on the options, arguments,
and external resources.
What happens when new scripts are created to do something similar? All too often, they end up with
different option names for conceptually the same purpose. It is common for functionality needed by
several scripts to be duplicated in each similar script. This rapidly gets out of hand, becoming a
maintenance frustration. Your team members are not "on the same page" and new people learning your tools
must have lengthy, verbal, one-on-one code tours.
Instead, a set of related scripts could be combined into a CLIF application. Consistent naming
conventions and sharing of common code is naturally encouraged. The commands are easy to test. New
commands can be added with ease.
FROM P.O.S. TO CLIF IN A FEW EASY STEPS
A "P.O.S." is a "Plain Old Script." This section shows you how to reform an old P.O.S., creating a shiny
new CLIF application!
Please see working code for this example included with the "CLI::Framework" distribution
(examples/demo-simple.pl).
This example demonstrates the following features:
• inline application definition
• basics (app, commands, command options and args)
• the relationship between plain scripts and CLIF applications (including how to convert between them)
To understand CLIF commands, imagine converting a legacy script to a CLIF application. First, create a
Perl class that inherits from CLI::Framework::Command. Place the main body of the script in a "run()"
method. Add the functions that the script defines, if any.
# Your Command subclass...
package Converted::Script::Command::LegacyScript;
use base qw( CLI::Framework::Command );
# main body of former script goes inside run():
sub run { ... }
Next, create a Perl class (creating a separate package file for the class is totally optional) that
inherits from CLI::Framework::Application (or you can use "CLI::Framework" as a shorthand) and define a
method, "command_map()", that links command names with classes that implement the commands:
# Your Application class...
package Converted::Script;
use base qw( CLI::Framework );
sub command_map {
'legacy-script' => 'Converted::Script::Command::LegacyScript',
}
The code that provides a friendly usage message (if the legacy script provided one) can be replaced by
defining the "usage_text" method:
sub usage_text {
qq{
$0 [--verbose|v] [--help|h]: how to use this application...
}
}
Back in your Command subclass, the option/argument processing code will be replaced with a method
defining what options will be recognized (the data structure to be returned is exactly as documented in
Getopt::Long::Descriptive):
sub option_spec {
[ 'help|h' => 'show help' ],
[ 'verbose|v' => 'be verbose' ],
}
...and that's all it takes to convert a simple script to a CLIF app. This contrived example demonstrates
the mechanics, but let me point out a few advantages (see DESIGN GOALS AND FEATURES for the long list):
Clear division of responsibilities
Using packages, subroutines, and separate files (if desired), CLIF apps follow established convention
and provide a new pattern for creating tools.
Easy to test
Now that functional units of code are subroutines in packages, you can unit test each component
independently.
Easy to maintain
Instead of puzzling over a several-thousand-line script, maintaining a CLIF application is like
maintaining any other well-engineered application code.
Easy to extend
Related tools frequently occur in groups. Instead of awkwardly forcing loosely-related behaviors
into the same script, CLIF makes it easy to add additional commands in a modular way.
WHEN NOT TO USE CLIF
CLIF could be used for the simplest of needs, but it may be overkill in very simple situations.
You may want to avoid CLIF for very basic scripts that have a single behavior and are completely
independent from other such tools. However, if there's a chance that the scripts might grow to become
more complex or if you would simply like a pattern to follow, it may still be worth considering.
CONCEPTS AND DEFINITIONS
See CONCEPTS AND DEFINITIONS.
UNDERSTANDING THE APPLICATION RUN SEQUENCE
See APPLICATION RUN SEQUENCE.
Understanding this is important to building more complex apps. You need, at the least, to understand how
CLIF differentiates between options and arguments that are meant for the application itself and those
options and arguments that are meant for individual commands.
The following examples demonstrate the alternative command request forms. Note that in all cases, any
number of (sub)command options and arguments can be passed (these examples show only one of each for
brevity).
FORM #1 (without subcommands) -- command requests that involve NO subcommands take the following form:
<app> [--app-opt] <cmd> [--cmd-opt] [cmd-arg] ...
(notice how the position of options and arguments determines whether they are meant for the application
as a whole or for the specific command).
FORM #2 (with subcommands) -- Command requests that involve A SINGLE subcommand take this form:
<app> [--app-opt] <cmd> [--cmd-opt] <subcmd> [--subcmd-opt] [subcmd-arg] ...
Command requests that involve MULTIPLE subcommands follow the same form:
<app> [--app-opt] <cmd> [--cmd-opt] <subcmd1> [--subcmd1-opt] <subcmd2> [--subcmd2-opt] [subcmd2-arg] ...
(notice that the final arguments apply to the final subcommand. The only command that can receive
arguments is the final subcommand).
A MORE INVOLVED EXAMPLE
Please see working code for this example included with the "CLI::Framework" distribution
(examples/queue).
The next example demonstrates the following features:
• inline application definition
• basics (app, commands, command options and args)
• subcommands
• validation of application and command arguments
• interactive mode and non-interactive mode
Suppose we need to write a command-line application that provides an interface to a queue. Strings can
be added to or removed from the queue, queue contents can be displayed, and queue "properties" can be set
to restrict the contents added to the queue. The interface should work interactively.
The following usage demonstrates the desired behavior:
[somebody@somewhere]$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile console
# ---- interactive mode ----
1) dequeue
2) cmd-list
3) enqueue
4) print
5) alias
6) property
> help enqueue
enqueue [--tag=<tag1> [--tag=<tag2> [...] ] ] <item1> [<item2> ... <itemN>]: add item(s) to queue
> enqueue --tag=x "something"
> property set --evens
> e 1 21 514 937 18
The working example in examples/queue accomplishes this goal in a single inline application containing
the Application class and multiple Command Classes.
This application is created in fundamentally the same way as the simple one presented earlier. It uses
more commands, more Application class/Command Class hooks, and subcommands. The code is much longer but
almost all of it is for business logic -- very little additional CLIF-specific code is needed.
The example code shows how various commands can be managed by an Application subclass. The code is
commented thoroughly to explain the various hooks that are available for Application class and Command
Classes.
Of course, CLIF applications can always be used in non-interactive mode:
# ---- non-interactive mode ----
$ examples/queue --qout=/tmp/qfile enqueue 'first'
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile enqueue --tag=x --tag=y 'second'
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile property list
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile property set --evens
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile property list
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile enqueue 17
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile enqueue 4
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile enqueue 2
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile dequeue
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile dequeue
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile dequeue
$ examples/queue --qin=/tmp/qfile --qout=/tmp/qfile enqueue 3
$ examples/queue --qin=/tmp/qfile print
PLANNING A COMPLEX CLIF APPLICATION
Little additional thought (beyond that needed for business logic) is required to create a basic CLIF app
-- the strategy explained in "FROM P.O.S. TO CLIF IN A FEW EASY STEPS" demonstrates how CLIF differs from
a "Plain Old Script".
A more sophisticated command line application will benefit from a wider variety of the features CLIF
provides. The extra features are easy to use, but the additional complexity warrants careful planning.
After the initial learning curve, applying interface design principles and implementing business rules
will become the only challenging aspects to developing your CLIF applications. This is as it should be
-- the framework handles application-independent aspects, leaving you to focus on the unique features of
your application.
Here are some considerations:
Basic interface
What commands and subcommands should be available?
What options and arguments will they support?
What kind of validation should be done on the provided command requests?
Which built-in commands will be used?
Will an interactive mode be provided?
If so, will a custom menu be created?
Do any commands need to directly access or modify the application itself or the other commands (these
will be metacommands)?
High-level code layout
Which components of the application will be defined in their own package files? Which will be
defined inline?
Separation of concerns using MVC strategy
How will the model be separated from the rest of the application? What about the view?
Data sharing between application and commands
What data will data be shared between the application and the commands? Will this be arranged by
using the cache, using a Command superclass (a generic command class that all of your commands
inherit from), or by some other means?
Read on for possible answers to some of these questions.
HOW CAN I ...?
This section briefly highlights how CLIF could be used to support various common goals. Even if your
particular situation does not appear here, reading this short section will give you an understanding of
how CLIF could be set up to support novel cases.
How can I quickly create a very simple application?
For a demonstration of how to create a very simple CLIF app, see "FROM P.O.S. TO CLIF IN A FEW EASY
STEPS". CLIF applications require, at the minimum:
• An Application class that inherits from CLI::Framework::Application (or "CLI::Framework"). For
anything useful to happen, it should override the "command_map()" hook and include a new command.
• A Command Class that inherits from CLI::Framework::Command. It should override the "run()" hook (or
have a subcommand that overrides "run()").
• An Application Script that calls the "run()" method in your application.
These can all be defined in one file or each class can be placed in a separate file. Do whatever works
best for your particular needs.
How can I add an interactive mode to my application?
The built-in console command can be used to enable your application to run interactively. To do this,
simply add the built-in command CLI::Framework::Command::Console to the command_map in your Application
class.
How can I include logging in my application?
In your Application class, define "init()" to initialize your logging object and save the resulting
object in the cache, where the object will be available to your application and command objects.
How can I include database connectivity in my application?
In your Application class, define "init()" to connect to your database and save the resulting object or
database handle in the cache, where the object/handle will be available to your application and command
objects.
Of course, for proper Separation of Concerns, you should not simply store a connected database handle in
the cache and use it directly in your Command classes. You should instead store an object of another
class that encapsulates your data model layer code. An example of this is the model class for the demo
journal application included with CLIF tests: t/lib/My/Journal/Model.pm.
How can I support an application configuration file?
In your Application class, define "init()" to load your configuration file and save the resulting
configuration object in the cache using the cache, where the object will be available to your application
and command objects.
How can I use templates for more flexible output?
In your Application class, override the "render()" method.
For instance, you could write an application where all commands return a data structure to be used in
processing a template. Your "render()" method could determine which template file to process (e.g. based
on which command is being run) and then process it using the received data structure.
How can I create an application-aware command?
In exceptional cases, you may need to create a command that "knows about" the application and needs
access to some of its data (which may include the data of other commands in the application).
To create an application-aware command, inherit from CLI::Framework::Command::Meta. The command will
then have an accessor that will provide access to the application object.
You should generally not need to do this -- your commands should usually be decoupled from your
application. This will occur by default when you inherit from CLI::Framework::Command.
How can I use alternative CLI prompting techniques and terminal I/O convenience functions?
You may, for example, want to present a menu of options from a variety of choices based on content from a
database. Or perhaps you want to prompt the user for a list of numbers and you want to support a comma-
separated list with ranges, etc.
Create a CLI::Framework::Command subclass (say, "Your::Command") that implements your convenience
functions or uses a CPAN module such as Term::Prompt. Then all of your commands can inherit from
"Your::Command" and will all have access to the functions.
You may also want to override read_cmd.
How can I create an app without a "help" command?
The 'help' command is fundamental to most applications. If you really want to build an application
without a 'help' command, simply create a custom Help command with an empty "run" method.
How can I dynamically determine whether or not to run interactively based on command-line options?
You may wish to provide an application option ("--interactive") to start interactive mode. One way to do
this is to use your application's "init" method to determine whether or not to invoke the built-in
console command. For example:
sub init {
my ($app, $opts) = @_;
# imagine fancy logic to determine whether or not to run interactively...
if( $opts->{interactive} ) {
$app->set_current_command('console');
}
return 1;
}
This will cause the interactive console to be launched during initialization. This technique could be
used to launch the built-in console command or a custom interactive command.
This was considered in greater detail on the discussion forum: <http://cpanforum.com/posts/12426>.
TROUBLESHOOTING
The following solutions may be helpful when working with CLIF.
• Don't forget to inherit from CLI::Framework::Application in your Application class and
CLI::Framework::Command in your command class
• Don't forget to override command_map() in your Application class
• Don't forget to override run() in your Command class
• If in doubt, run "perl -wc <your command class file>"
If a user-defined command class does not compile, your CLIF application will fail silently. Running
"perl -wc Class.pm" will report compilation problems for Class.pm.
LICENSE AND COPYRIGHT
Copyright (c) 2009 Karl Erisman (kerisman@cpan.org). All rights reserved. This is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perlartistic.
AUTHOR
Karl Erisman (kerisman@cpan.org)