oracular (3) IO::Capture::Overview.3pm.gz
NAME
IO::Capture -- Overview of "IO::Capture" Module, and classes derived from it.
DESCRIPTION
The modules in this distribution are designed to allow you to capture and process output sent to STDOUT
and/or STDERR.
I initial created the modules to use in building module tests. I wanted to be able to intentionally
cause errors, and insure the module responded correctly. E.g., Call a class method without a required
argument. Using IO::Capture keeps the user from seeing these intentional errors when running 'make
test'.
I have also found this useful on occasion in Perl Tk apps, where I wanted to capture output from a Perl
module I was using. I could then capture, then put the text into a log or message window.
Note: None of the modules currently distributed will capture from the 'system' Perl function, or the
like. It could be done, but generally, if you would like to capture from a system command, you don't
need this module, just use the backticks operators.
my $output = '/usr/bin/ls';
They are small, lightweight modules. Instead of designing in a lot of features, we designed it to be
easily reusable and adaptable. A module can be quickly built, that incorporates custom methods, but
reuses all existing features of one of the derived classes. See the section on "ADDING FEATURES" Or, if
you need to change the actual capture mechanism, "WRITING YOUR OWN DERIVED CLASS". (Don't worry, it's a
piece of cake)
DERIVED CLASSES
There are several classes derived from "IO::Capture".
IO::Capture::Stdout
Module to capture "STDOUT" from program. See IO::Capture::Stdout.
IO::Capture::Stderr
Module to capture "STDERR" from program. See IO::Capture::Stderr.
IO::Capture::ErrorMessages
This method has been depreciated. The only difference between this one and Stderr.pm was the trap for
WARN. I found it was fixed in 5.8 so just check in Stderr now. I.e., Just use Stderr now. It (Stderr)
will detect what version of perl you are using, and act accordingly. The two
("IO::Capture::ErrorMessages" and "IO::Capture::Stderr") are currently identical, and
"IO::Capture::ErrorMessages" will be removed in a future release.
If you would like to add features to any of these, or build your own module using "IO::Capture" as a
base, read on.
ADDING FEATURES
If one of these modules takes care of your problem, install it and have fun!
But let's say you would like to add a feature to one of the derived classes, say IO::Capture::Stdout. No
need to re-write the whole module, just use it as the base, and write your one feature. Here is a
somewhat simplified example.
#
# Example module to add a grep_it method
#
# Give your package a name
package MyPackage;
#use IO:Capture:Stdout as the base
use base 'IO::Capture::Stdout';
#define your method
sub grep_it {
my $self = shift;
my $string = shift;
my @found_lines;
# Making a ref to the array makes it easier to read :-)
my $arrayref = \@{$self->{'IO::Capture::messages'}};
for my $line (@$arrayref) {
push @found_lines, $line if $line =~ /$string/;
}
return wantarray ? @found_lines : scalar(@found_lines);
}
1;
Using it in this script
#!/usr/sbin/perl
use strict;
use warnings;
use MyPackage;
my $capture = MyPackage->new();
$capture->start;
print "The quick brown fox jumped over ...";
print "garden wall";
print "The quick red fox jumped over ...";
print "garden wall";
$capture->stop;
for my $line ($capture->grep_it("fox")) {
print "$line\n";
}
Results in
$ grep_it
The quick brown fox jumped over ...
The quick red fox jumped over ...
WRITING YOUR OWN DERIVED CLASS
Before starting your own sub-class, be sure to read through IO::Capture. Pay special attention to the
internal methods that are only defined as abstract methods in "IO::Capture". For examples, look at the
sub-classes included with this distribution. ("IO::Capture::Stdout", "IO:Capture::Stderr". You can start
by copying one of these and using it as a template. They have the required private methods defined
already, and you may very well be able to use them as is. Change any methods, and add any new ones, as
needed.
For example, here is a commented copy of "IO::Capture::Stderr".
#
# Example module using abstract class IO::Capture
#
# Change this to give your class it's own name
package IO::Capture::Stderr;
# Make IO::Capture the base class
use base qw/IO::Capture/;
# If using included utility module in '_start()'
use IO::Capture::Tie_STDx;
# Override the three abstract methods needed to make a valid
# module. See IO::Capture manpage
# 1) _start - Starts the data capture. Is run from public method
# start();
#
# 2) _retrieve_captured_text() - Move the captured text into the
# object hash key, "IO::Capture::messages". Called by public method
#
# 3) _stop - Stop the data capture. Called by public method 'stop()'
# after private method '_retrieve_captured_text()' returns.
#
sub _start {
tie *STDERR, "IO::Capture::Tie_STDx";
}
sub _retrieve_captured_text {
my $self = shift;
# making a reference to it makes it more readable ;-)
my $messages = \@{$self->{'IO::Capture::messages'}};
@$messages = <STDERR>;
}
sub _stop {
untie *STDERR;
return 1;
}
1;
Lets say you don't want to capture all the text. You just want to grab the lines that have the word
"Error" in them. The only thing you need to change is _retrieve_captured_text. (Besides the package
name)
Something like:
sub _retrieve_captured_text {
my $self = shift;
# making a reference to it makes it more readable ;-)
my $messages = \@{$self->{'IO::Capture::messages'}};
while (<STDERR>) {
push @$messages, $_ if /error/i;
}
}
Yes. You could do this easier by just using "IO::Capture::Stderr" as the base and overriding
"_retrieve_captured_text" like in "ADDING FEATURES", but hey, we needed an easy example. :-)
If you want your class to have arguments that users can pass in, just use the default "new()" method and
have the arguments passed in as an anonymous array. See the "IO::Capture::Stderr" module for an example.
BUGS
Please report bugs on http://rt.cpan.org/
CREDITS
Special thanks to James E Keenan for many bug fixes and tests he provided.
AUTHOR
Mark Reynolds reynolds<at>sgi.com
Note: "Change <at" to 'at' sign.>
COPYRIGHT
Copyright (c) 2003-2005, Mark Reynolds. All Rights Reserved. This module is free software. It may be
used, redistributed and/or modified under the same terms as Perl itself.