oracular (3) Params::ValidationCompiler.3pm.gz
NAME
Params::ValidationCompiler - Build an optimized subroutine parameter validator once, use it forever
VERSION
version 0.31
SYNOPSIS
use Types::Standard qw( Int Str );
use Params::ValidationCompiler qw( validation_for );
{
my $validator = validation_for(
params => {
foo => { type => Int },
bar => {
type => Str,
optional => 1,
},
baz => {
type => Int,
default => 42,
},
},
);
sub foo {
my %args = $validator->(@_);
}
}
{
my $validator = validation_for(
params => [
{ type => Int },
{
type => Str,
optional => 1,
},
],
);
sub bar {
my ( $int, $str ) = $validator->(@_);
}
}
{
my $validator = validation_for(
params => [
foo => { type => Int },
bar => {
type => Str,
optional => 1,
},
],
named_to_list => 1,
);
sub baz {
my ( $foo, $bar ) = $validator->(@_);
}
}
DESCRIPTION
This module creates a customized, highly efficient parameter checking subroutine. It can handle named or
positional parameters, and can return the parameters as key/value pairs or a list of values.
In addition to type checks, it also supports parameter defaults, optional parameters, and extra "slurpy"
parameters.
PARAMETERS
This module has two options exports, "validation_for" and "source_for". Both of these subs accept the
same options:
params
An arrayref or hashref containing a parameter specification.
If you pass a hashref then the generated validator sub will expect named parameters. The "params" value
should be a hashref where the parameter names are keys and the specs are the values.
If you pass an arrayref and "named_to_list" is false, the validator will expect positional params. Each
element of the "params" arrayref should be a parameter spec.
If you pass an arrayref and "named_to_list" is true, the validator will expect named params, but will
return a list of values. In this case the arrayref should contain a list of key/value pairs, where
parameter names are the keys and the specs are the values.
Each spec can contain either a boolean or hashref. If the spec is a boolean, this indicates required
(true) or optional (false).
The spec hashref accepts the following keys:
• type
A type object. This can be a Moose type (from Moose or MooseX::Types), a Type::Tiny type, or a Specio
type.
If the type has coercions, those will always be used.
• default
This can either be a simple (non-reference) scalar or a subroutine reference. The sub ref will be
called without any arguments (for now).
• optional
A boolean indicating whether or not the parameter is optional. By default, parameters are required
unless you provide a default.
slurpy
If this is a simple true value, then the generated subroutine accepts additional arguments not specified
in "params". By default, extra arguments cause an exception.
You can also pass a type constraint here, in which case all extra arguments must be values of the
specified type.
named_to_list
If this is true, the generated subroutine will expect a list of key-value pairs or a hashref and it will
return a list containing only values. The "params" you pass must be a arrayref of key-value pairs. The
order of these pairs determines the order in which values are returned.
You cannot combine "slurpy" with "named_to_list" as there is no way to know how to order the extra return
values.
return_object
If this is true, the generated subroutine will return an object instead of a hashref. You cannot set this
option to true if you set either or "slurpy" or "named_to_list".
The object's methods correspond to the parameter names passed to the subroutine. While calling methods on
an object is slower than accessing a hashref, the advantage is that if you typo a parameter name you'll
get a helpful error.
If you have Class::XSAccessor installed then this will be used to create the class's methods, which makes
it fairly fast.
The returned object is in a generated class. Do not rely on this class name being anything in specific,
and don't check this object using "isa", "DOES", or anything similar.
When "return_object" is true, the parameter spec hashref also accepts to the following additional keys:
• getter
Use this to set an explicit getter method name for the parameter. By default the method name will be
the same as the parameter name. Note that if the parameter name is not a valid sub name, then you
will get an error compiling the validation sub unless you specify a getter for the parameter.
• predicate
Use this to ask for a predicate method to be created for this parameter. The predicate method returns
true if the parameter was passed and false if it wasn't. Note that this is only useful for optional
parameters, but you can ask for a predicate for any parameter.
EXPORTS
The exported subs are:
validation_for(...)
This returns a subroutine that implements the specific parameter checking. This subroutine expects to be
given the parameters to validate in @_. If all the parameters are valid, it will return the validated
parameters (with defaults as appropriate), either as a list of key-value pairs or as a list of just
values. If any of the parameters are invalid it will throw an exception.
For validators expected named params, the generated subroutine accepts either a list of key-value pairs
or a single hashref. Otherwise the validator expects a list of values.
For now, you must shift off the invocant yourself.
This subroutine accepts the following additional parameters:
• name
If this is given, then the generated subroutine will be named using Sub::Util. This is strongly
recommended as it makes it possible to distinguish different check subroutines when profiling or in
stack traces.
This name will also be used in some exception messages, even if Sub::Util is not available.
Note that you must install Sub::Util yourself separately, as it is not required by this distribution,
in order to avoid requiring a compiler.
• name_is_optional
If this is true, then the name is ignored when "Sub::Util" is not installed. If this is false, then
passing a name when Sub::Util cannot be loaded causes an exception.
This is useful for CPAN modules where you want to set a name if you can, but you do not want to add a
prerequisite on Sub::Util.
• debug
Sets the "EVAL_CLOSURE_PRINT_SOURCE" environment variable to true before calling
"Eval::Closure::eval_closure()". This causes the source of the subroutine to be printed before it's
"eval"'d.
source_for(...)
This returns a two element list. The first is a string containing the source code for the generated sub.
The second is a hashref of "environment" variables to be used when generating the subroutine. These are
the arguments that are passed to Eval::Closure.
SUPPORT
Bugs may be submitted at <https://github.com/houseabsolute/Params-ValidationCompiler/issues>.
SOURCE
The source code repository for Params-ValidationCompiler can be found at
<https://github.com/houseabsolute/Params-ValidationCompiler>.
DONATIONS
If you'd like to thank me for the work I've done on this module, please consider making a "donation" to
me via PayPal. I spend a lot of free time creating free software, and would appreciate any support you'd
care to offer.
Please note that I am not suggesting that you must do this in order for me to continue working on this
particular software. I will continue to do so, inasmuch as I have in the past, for as long as it
interests me.
Similarly, a donation made in this way will probably not make me work on this software much more, unless
I get so many donations that I can consider working on free software full time (let's all have a chuckle
at that together).
To donate, log into PayPal and send money to autarch@urth.org, or use the button at
<https://houseabsolute.com/foss-donations/>.
AUTHOR
Dave Rolsky <autarch@urth.org>
CONTRIBUTORS
• Gregory Oschwald <goschwald@maxmind.com> • Gregory Oschwald <oschwald@gmail.com> • Tomasz Konojacki <me@xenu.pl>
COPYRIGHT AND LICENSE
This software is Copyright (c) 2016 - 2023 by Dave Rolsky.
This is free software, licensed under:
The Artistic License 2.0 (GPL Compatible)
The full text of the license can be found in the LICENSE file included with this distribution.