Ubuntu Manpage: SSL_CONF_cmd_value_type, SSL_CONF_cmd

name
synopsis
description
supported command line commands
supported configuration file commands
supported command types
notes
return values
examples
see also
history
copyright

Provided by: libssl-doc_3.3.1-2ubuntu2.1_all

NAME

       SSL_CONF_cmd_value_type, SSL_CONF_cmd - send configuration command

SYNOPSIS

        #include <openssl/ssl.h>

        int SSL_CONF_cmd(SSL_CONF_CTX *ctx, const char *option, const char *value);
        int SSL_CONF_cmd_value_type(SSL_CONF_CTX *ctx, const char *option);

DESCRIPTION

       The function SSL_CONF_cmd() performs configuration operation option with optional parameter value on ctx.
       Its purpose is to simplify application configuration of SSL_CTX or SSL structures by providing a common
       framework for command line options or configuration files.

       SSL_CONF_cmd_value_type() returns the type of value that option refers to.

SUPPORTED COMMAND LINE COMMANDS

Currently supported option names for command lines (i.e. when the flag SSL_CONF_FLAG_CMDLINE is set) are
listed below. Note: all option names are case sensitive. Unless otherwise stated commands can be used by
both clients and servers and the value parameter is not used. The default prefix for command line
commands is - and that is reflected below.

-bugs
Various bug workarounds are set, same as setting SSL_OP_ALL.

-no_comp
Disables support for SSL/TLS compression, same as setting SSL_OP_NO_COMPRESSION. As of OpenSSL
1.1.0, compression is off by default.

-comp
Enables support for SSL/TLS compression, same as clearing SSL_OP_NO_COMPRESSION. This command was
introduced in OpenSSL 1.1.0. As of OpenSSL 1.1.0, compression is off by default. TLS compression can
only be used in security level 1 or lower. From OpenSSL 3.2.0 and above the default security level is
2, so this option will have no effect without also changing the security level. See
SSL_CTX_set_security_level(3).

-no_ticket
Disables support for session tickets, same as setting SSL_OP_NO_TICKET.

-serverpref
Use server and not client preference order when determining which cipher suite, signature algorithm
or elliptic curve to use for an incoming connection. Equivalent to SSL_OP_CIPHER_SERVER_PREFERENCE.
Only used by servers.

-client_renegotiation
Allows servers to accept client-initiated renegotiation. Equivalent to setting
SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Only used by servers.

-legacy_renegotiation
Permits the use of unsafe legacy renegotiation. Equivalent to setting
SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION.

-no_renegotiation
Disables all attempts at renegotiation in TLSv1.2 and earlier, same as setting
SSL_OP_NO_RENEGOTIATION.

-no_resumption_on_reneg
Sets SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION. Only used by servers.

-legacy_server_connect, -no_legacy_server_connect
Permits or prohibits the use of unsafe legacy renegotiation for OpenSSL clients only. Equivalent to
setting or clearing SSL_OP_LEGACY_SERVER_CONNECT.

-prioritize_chacha
Prioritize ChaCha ciphers when the client has a ChaCha20 cipher at the top of its preference list.
This usually indicates a client without AES hardware acceleration (e.g. mobile) is in use. Equivalent
to SSL_OP_PRIORITIZE_CHACHA. Only used by servers. Requires -serverpref.

-allow_no_dhe_kex
In TLSv1.3 allow a non-(ec)dhe based key exchange mode on resumption. This means that there will be
no forward secrecy for the resumed session.

-prefer_no_dhe_kex
In TLSv1.3, on resumption let the server prefer a non-(ec)dhe based key exchange mode over an (ec)dhe
based one. Requires -allow_no_dhe_kex. Equivalent to SSL_OP_PREFER_NO_DHE_KEX. Only used by servers.

-strict
Enables strict mode protocol handling. Equivalent to setting SSL_CERT_FLAG_TLS_STRICT.

-sigalgs algs
This sets the supported signature algorithms for TLSv1.2 and TLSv1.3. For clients this value is used
directly for the supported signature algorithms extension. For servers it is used to determine which
signature algorithms to support.

The algs argument should be a colon separated list of signature algorithms in order of decreasing
preference of the form algorithm+hash or signature_scheme. For the default providers shipped with
OpenSSL, algorithm is one of RSA, DSA or ECDSA and hash is a supported algorithm OID short name such
as SHA1, SHA224, SHA256, SHA384 or SHA512. Note: algorithm and hash names are case sensitive.
signature_scheme is one of the signature schemes defined in TLSv1.3, specified using the IETF name,
e.g., ecdsa_secp256r1_sha256, ed25519, or rsa_pss_pss_sha256. Additional providers may make available
further algorithms via the TLS_SIGALG capability. See "CAPABILITIES" in provider-base(7).

If this option is not set then all signature algorithms supported by all activated providers are
permissible.

Note: algorithms which specify a PKCS#1 v1.5 signature scheme (either by using RSA as the algorithm
or by using one of the rsa_pkcs1_* identifiers) are ignored in TLSv1.3 and will not be negotiated.

-client_sigalgs algs
This sets the supported signature algorithms associated with client authentication for TLSv1.2 and
TLSv1.3. For servers the algs is used in the signature_algorithms field of a CertificateRequest
message. For clients it is used to determine which signature algorithm to use with the client
certificate. If a server does not request a certificate this option has no effect.

The syntax of algs is identical to -sigalgs. If not set, then the value set for -sigalgs will be used
instead.

-groups groups
This sets the supported groups. For clients, the groups are sent using the supported groups
extension. For servers, it is used to determine which group to use. This setting affects groups used
for signatures (in TLSv1.2 and earlier) and key exchange. The first group listed will also be used
for the key_share sent by a client in a TLSv1.3 ClientHello.

The groups argument is a colon separated list of groups. The group can be either the NIST name (e.g.
P-256), some other commonly used name where applicable (e.g. X25519, ffdhe2048) or an OpenSSL OID
name (e.g. prime256v1). Group names are case sensitive. The list should be in order of preference
with the most preferred group first.

Currently supported groups for TLSv1.3 are P-256, P-384, P-521, X25519, X448, ffdhe2048, ffdhe3072,
ffdhe4096, ffdhe6144, ffdhe8192.

-curves groups
This is a synonym for the -groups command.

-named_curve curve
This sets the temporary curve used for ephemeral ECDH modes. Only used by servers.

-tx_cert_comp
Enables support for sending TLSv1.3 compressed certificates.

-no_tx_cert_comp
Disables support for sending TLSv1.3 compressed certificates.

-rx_cert_comp
Enables support for receiving TLSv1.3 compressed certificates.

-no_rx_cert_comp
Disables support for receiving TLSv1.3 compressed certificates.

-comp
The groups argument is a curve name or the special value auto which picks an appropriate curve based
on client and server preferences. The curve can be either the NIST name (e.g. P-256) or an OpenSSL
OID name (e.g. prime256v1). Curve names are case sensitive.

-cipher ciphers
Sets the TLSv1.2 and below ciphersuite list to ciphers. This list will be combined with any
configured TLSv1.3 ciphersuites. Note: syntax checking of ciphers is currently not performed unless a
SSL or SSL_CTX structure is associated with ctx.

-ciphersuites 1.3ciphers
Sets the available ciphersuites for TLSv1.3 to value. This is a colon-separated list of TLSv1.3
ciphersuite names in order of preference. This list will be combined any configured TLSv1.2 and below
ciphersuites. See openssl-ciphers(1) for more information.

-min_protocol minprot, -max_protocol maxprot
Sets the minimum and maximum supported protocol. Currently supported protocol values are SSLv3,
TLSv1, TLSv1.1, TLSv1.2, TLSv1.3 for TLS; DTLSv1, DTLSv1.2 for DTLS, and None for no limit. If
either the lower or upper bound is not specified then only the other bound applies, if specified. If
your application supports both TLS and DTLS you can specify any of these options twice, once with a
bound for TLS and again with an appropriate bound for DTLS. To restrict the supported protocol
versions use these commands rather than the deprecated alternative commands below.

-record_padding padding
Attempts to pad TLSv1.3 records so that they are a multiple of padding in length on send. A padding
of 0 or 1 turns off padding. Otherwise, the padding must be >1 or <=16384.

-debug_broken_protocol
Ignored.

-no_middlebox
Turn off "middlebox compatibility", as described below.

Additional Options
The following options are accepted by SSL_CONF_cmd(), but are not processed by the OpenSSL commands.

-cert file
Attempts to use file as the certificate for the appropriate context. It currently uses
SSL_CTX_use_certificate_chain_file() if an SSL_CTX structure is set or SSL_use_certificate_file()
with filetype PEM if an SSL structure is set. This option is only supported if certificate operations
are permitted.

-key file
Attempts to use file as the private key for the appropriate context. This option is only supported if
certificate operations are permitted. Note: if no -key option is set then a private key is not loaded
unless the flag SSL_CONF_FLAG_REQUIRE_PRIVATE is set.

-dhparam file
Attempts to use file as the set of temporary DH parameters for the appropriate context. This option
is only supported if certificate operations are permitted.

-no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3
Disables protocol support for SSLv3, TLSv1.0, TLSv1.1, TLSv1.2 or TLSv1.3 by setting the
corresponding options SSL_OP_NO_SSLv3, SSL_OP_NO_TLSv1, SSL_OP_NO_TLSv1_1, SSL_OP_NO_TLSv1_2 and
SSL_OP_NO_TLSv1_3 respectively. These options are deprecated, use -min_protocol and -max_protocol
instead.

-anti_replay, -no_anti_replay
Switches replay protection, on or off respectively. With replay protection on, OpenSSL will
automatically detect if a session ticket has been used more than once, TLSv1.3 has been negotiated,
and early data is enabled on the server. A full handshake is forced if a session ticket is used a
second or subsequent time. Anti-Replay is on by default unless overridden by a configuration file and
is only used by servers. Anti-replay measures are required for compliance with the TLSv1.3
specification. Some applications may be able to mitigate the replay risks in other ways and in such
cases the built-in OpenSSL functionality is not required. Switching off anti-replay is equivalent to
SSL_OP_NO_ANTI_REPLAY.

SUPPORTED CONFIGURATION FILE COMMANDS

Currently supported option names for configuration files (i.e., when the flag SSL_CONF_FLAG_FILE is set)
are listed below. All configuration file option names are case insensitive so signaturealgorithms is
recognised as well as SignatureAlgorithms. Unless otherwise stated the value names are also case
insensitive.

Note: the command prefix (if set) alters the recognised option values.

CipherString
Sets the ciphersuite list for TLSv1.2 and below to value. This list will be combined with any
configured TLSv1.3 ciphersuites. Note: syntax checking of value is currently not performed unless an
SSL or SSL_CTX structure is associated with ctx.

Ciphersuites
Sets the available ciphersuites for TLSv1.3 to value. This is a colon-separated list of TLSv1.3
ciphersuite names in order of preference. This list will be combined any configured TLSv1.2 and below
ciphersuites. See openssl-ciphers(1) for more information.

Certificate
Attempts to use the file value as the certificate for the appropriate context. It currently uses
SSL_CTX_use_certificate_chain_file() if an SSL_CTX structure is set or SSL_use_certificate_file()
with filetype PEM if an SSL structure is set. This option is only supported if certificate operations
are permitted.

PrivateKey
Attempts to use the file value as the private key for the appropriate context. This option is only
supported if certificate operations are permitted. Note: if no PrivateKey option is set then a
private key is not loaded unless the SSL_CONF_FLAG_REQUIRE_PRIVATE is set.

ChainCAFile, ChainCAPath, VerifyCAFile, VerifyCAPath
These options indicate a file or directory used for building certificate chains or verifying
certificate chains. These options are only supported if certificate operations are permitted.

RequestCAFile
This option indicates a file containing a set of certificates in PEM form. The subject names of the
certificates are sent to the peer in the certificate_authorities extension for TLS 1.3 (in
ClientHello or CertificateRequest) or in a certificate request for previous versions or TLS.

ServerInfoFile
Attempts to use the file value in the "serverinfo" extension using the function
SSL_CTX_use_serverinfo_file.

DHParameters
Attempts to use the file value as the set of temporary DH parameters for the appropriate context.
This option is only supported if certificate operations are permitted.

RecordPadding
Attempts to pad TLSv1.3 records so that they are a multiple of value in length on send. A value of 0
or 1 turns off padding. Otherwise, the value must be >1 or <=16384.

SignatureAlgorithms
This sets the supported signature algorithms for TLSv1.2 and TLSv1.3. For clients this value is used
directly for the supported signature algorithms extension. For servers it is used to determine which
signature algorithms to support.

The value argument should be a colon separated list of signature algorithms in order of decreasing
preference of the form algorithm+hash or signature_scheme. For the default providers shipped with
OpenSSL, algorithm is one of RSA, DSA or ECDSA and hash is a supported algorithm OID short name such
as SHA1, SHA224, SHA256, SHA384 or SHA512. Note: algorithm and hash names are case sensitive.
signature_scheme is one of the signature schemes defined in TLSv1.3, specified using the IETF name,
e.g., ecdsa_secp256r1_sha256, ed25519, or rsa_pss_pss_sha256. Additional providers may make
available further algorithms via the TLS_SIGALG capability. See "CAPABILITIES" in provider-base(7).

If this option is not set then all signature algorithms supported by all activated providers are
permissible.

Note: algorithms which specify a PKCS#1 v1.5 signature scheme (either by using RSA as the algorithm
or by using one of the rsa_pkcs1_* identifiers) are ignored in TLSv1.3 and will not be negotiated.

ClientSignatureAlgorithms
This sets the supported signature algorithms associated with client authentication for TLSv1.2 and
TLSv1.3. For servers the value is used in the signature_algorithms field of a CertificateRequest
message. For clients it is used to determine which signature algorithm to use with the client
certificate. If a server does not request a certificate this option has no effect.

The syntax of value is identical to SignatureAlgorithms. If not set then the value set for
SignatureAlgorithms will be used instead.

Groups
This sets the supported groups. For clients, the groups are sent using the supported groups
extension. For servers, it is used to determine which group to use. This setting affects groups used
for signatures (in TLSv1.2 and earlier) and key exchange. The first group listed will also be used
for the key_share sent by a client in a TLSv1.3 ClientHello.

The value argument is a colon separated list of groups. The group can be either the NIST name (e.g.
P-256), some other commonly used name where applicable (e.g. X25519, ffdhe2048) or an OpenSSL OID
name (e.g. prime256v1). Group names are case sensitive. The list should be in order of preference
with the most preferred group first.

Currently supported groups for TLSv1.3 are P-256, P-384, P-521, X25519, X448, ffdhe2048, ffdhe3072,
ffdhe4096, ffdhe6144, ffdhe8192.

Curves
This is a synonym for the "Groups" command.

MinProtocol
This sets the minimum supported SSL, TLS or DTLS version.

Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, TLSv1.3, DTLSv1 and DTLSv1.2.
The SSL and TLS bounds apply only to TLS-based contexts, while the DTLS bounds apply only to DTLS-
based contexts. The command can be repeated with one instance setting a TLS bound, and the other
setting a DTLS bound. The value None applies to both types of contexts and disables the limits.

MaxProtocol
This sets the maximum supported SSL, TLS or DTLS version.

Protocol
This can be used to enable or disable certain versions of the SSL, TLS or DTLS protocol.

The value argument is a comma separated list of supported protocols to enable or disable. If a
protocol is preceded by - that version is disabled.

All protocol versions are enabled by default. You need to disable at least one protocol version for
this setting have any effect. Only enabling some protocol versions does not disable the other
protocol versions.

Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, TLSv1.3, DTLSv1 and DTLSv1.2.
The special value ALL refers to all supported versions.

This can't enable protocols that are disabled using MinProtocol or MaxProtocol, but can disable
protocols that are still allowed by them.

The Protocol command is fragile and deprecated; do not use it. Use MinProtocol and MaxProtocol
instead. If you do use Protocol, make sure that the resulting range of enabled protocols has no
"holes", e.g. if TLS 1.0 and TLS 1.2 are both enabled, make sure to also leave TLS 1.1 enabled.

Options
The value argument is a comma separated list of various flags to set. If a flag string is preceded -
it is disabled. See the SSL_CTX_set_options(3) function for more details of individual options.

Each option is listed below. Where an operation is enabled by default the -flag syntax is needed to
disable it.

SessionTicket: session ticket support, enabled by default. Inverse of SSL_OP_NO_TICKET: that is
-SessionTicket is the same as setting SSL_OP_NO_TICKET.

Compression: SSL/TLS compression support, disabled by default. Inverse of SSL_OP_NO_COMPRESSION.

EmptyFragments: use empty fragments as a countermeasure against a SSL 3.0/TLS 1.0 protocol
vulnerability affecting CBC ciphers. It is set by default. Inverse of
SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.

Bugs: enable various bug workarounds. Same as SSL_OP_ALL.

DHSingle: enable single use DH keys, set by default. Inverse of SSL_OP_DH_SINGLE. Only used by
servers.

ECDHSingle: enable single use ECDH keys, set by default. Inverse of SSL_OP_ECDH_SINGLE. Only used by
servers.

ServerPreference: use server and not client preference order when determining which cipher suite,
signature algorithm or elliptic curve to use for an incoming connection. Equivalent to
SSL_OP_CIPHER_SERVER_PREFERENCE. Only used by servers.

PrioritizeChaCha: prioritizes ChaCha ciphers when the client has a ChaCha20 cipher at the top of its
preference list. This usually indicates a mobile client is in use. Equivalent to
SSL_OP_PRIORITIZE_CHACHA. Only used by servers.

NoResumptionOnRenegotiation: set SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION flag. Only used by
servers.

NoRenegotiation: disables all attempts at renegotiation in TLSv1.2 and earlier, same as setting
SSL_OP_NO_RENEGOTIATION.

UnsafeLegacyRenegotiation: permits the use of unsafe legacy renegotiation. Equivalent to
SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION.

UnsafeLegacyServerConnect: permits the use of unsafe legacy renegotiation for OpenSSL clients only.
Equivalent to SSL_OP_LEGACY_SERVER_CONNECT.

EncryptThenMac: use encrypt-then-mac extension, enabled by default. Inverse of
SSL_OP_NO_ENCRYPT_THEN_MAC: that is, -EncryptThenMac is the same as setting
SSL_OP_NO_ENCRYPT_THEN_MAC.

AllowNoDHEKEX: In TLSv1.3 allow a non-(ec)dhe based key exchange mode on resumption. This means that
there will be no forward secrecy for the resumed session. Equivalent to SSL_OP_ALLOW_NO_DHE_KEX.

PreferNoDHEKEX: In TLSv1.3, on resumption let the server prefer a non-(ec)dhe based key exchange mode
over an (ec)dhe based one. Requires AllowNoDHEKEX. Equivalent to SSL_OP_PREFER_NO_DHE_KEX. Only used
by servers.

MiddleboxCompat: If set then dummy Change Cipher Spec (CCS) messages are sent in TLSv1.3. This has
the effect of making TLSv1.3 look more like TLSv1.2 so that middleboxes that do not understand
TLSv1.3 will not drop the connection. This option is set by default. A future version of OpenSSL may
not set this by default. Equivalent to SSL_OP_ENABLE_MIDDLEBOX_COMPAT.

AntiReplay: If set then OpenSSL will automatically detect if a session ticket has been used more than
once, TLSv1.3 has been negotiated, and early data is enabled on the server. A full handshake is
forced if a session ticket is used a second or subsequent time. This option is set by default and is
only used by servers. Anti-replay measures are required to comply with the TLSv1.3 specification.
Some applications may be able to mitigate the replay risks in other ways and in such cases the built-
in OpenSSL functionality is not required. Disabling anti-replay is equivalent to setting
SSL_OP_NO_ANTI_REPLAY.

ExtendedMasterSecret: use extended master secret extension, enabled by default. Inverse of
SSL_OP_NO_EXTENDED_MASTER_SECRET: that is, -ExtendedMasterSecret is the same as setting
SSL_OP_NO_EXTENDED_MASTER_SECRET.

CANames: use CA names extension, enabled by default. Inverse of SSL_OP_DISABLE_TLSEXT_CA_NAMES: that
is, -CANames is the same as setting SSL_OP_DISABLE_TLSEXT_CA_NAMES.

KTLS: Enables kernel TLS if support has been compiled in, and it is supported by the negotiated
ciphersuites and extensions. Equivalent to SSL_OP_ENABLE_KTLS.

StrictCertCheck: Enable strict certificate checking. Equivalent to setting SSL_CERT_FLAG_TLS_STRICT
with SSL_CTX_set_cert_flags().

TxCertificateCompression: support sending compressed certificates, enabled by default. Inverse of
SSL_OP_NO_TX_CERTIFICATE_COMPRESSION: that is, -TxCertificateCompression is the same as setting
SSL_OP_NO_TX_CERTIFICATE_COMPRESSION.

RxCertificateCompression: support receiving compressed certificates, enabled by default. Inverse of
SSL_OP_NO_RX_CERTIFICATE_COMPRESSION: that is, -RxCertificateCompression is the same as setting
SSL_OP_NO_RX_CERTIFICATE_COMPRESSION.

KTLSTxZerocopySendfile: use the zerocopy TX mode of sendfile(), which gives a performance boost when
used with KTLS hardware offload. Note that invalid TLS records might be transmitted if the file is
changed while being sent. This option has no effect if KTLS is not enabled. Equivalent to
SSL_OP_ENABLE_KTLS_TX_ZEROCOPY_SENDFILE. This option only applies to Linux. KTLS sendfile on FreeBSD
doesn't offer an option to disable zerocopy and always runs in this mode.

IgnoreUnexpectedEOF: Equivalent to SSL_OP_IGNORE_UNEXPECTED_EOF. You should only enable this option
if the protocol running over TLS can detect a truncation attack itself, and that the application is
checking for that truncation attack.

VerifyMode
The value argument is a comma separated list of flags to set.

Peer enables peer verification: for clients only.

Request requests but does not require a certificate from the client. Servers only.

Require requests and requires a certificate from the client: an error occurs if the client does not
present a certificate. Servers only.

Once requests a certificate from a client only on the initial connection: not when renegotiating.
Servers only.

RequestPostHandshake configures the connection to support requests but does not require a certificate
from the client post-handshake. A certificate will not be requested during the initial handshake. The
server application must provide a mechanism to request a certificate post-handshake. Servers only.
TLSv1.3 only.

RequiresPostHandshake configures the connection to support requests and requires a certificate from
the client post-handshake: an error occurs if the client does not present a certificate. A
certificate will not be requested during the initial handshake. The server application must provide a
mechanism to request a certificate post-handshake. Servers only. TLSv1.3 only.

ClientCAFile, ClientCAPath
A file or directory of certificates in PEM format whose names are used as the set of acceptable names
for client CAs. Servers only. This option is only supported if certificate operations are permitted.

SUPPORTED COMMAND TYPES

       The function SSL_CONF_cmd_value_type() currently returns one of the following types:

       SSL_CONF_TYPE_UNKNOWN
           The option string is unrecognised, this return value can be use to flag syntax errors.

       SSL_CONF_TYPE_STRING
           The value is a string without any specific structure.

       SSL_CONF_TYPE_FILE
           The value is a filename.

       SSL_CONF_TYPE_DIR
           The value is a directory name.

       SSL_CONF_TYPE_NONE
           The value string is not used e.g. a command line option which doesn't take an argument.

NOTES

       The order of operations is significant. This can be used to set either defaults or values which cannot be
       overridden. For example if an application calls:

        SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
        SSL_CONF_cmd(ctx, userparam, uservalue);

       it will disable SSLv3 support by default but the user can override it. If however the call sequence is:

        SSL_CONF_cmd(ctx, userparam, uservalue);
        SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

       SSLv3 is always disabled and attempt to override this by the user are ignored.

       By checking the return code of SSL_CONF_cmd() it is possible to query if a given option is recognised,
       this is useful if SSL_CONF_cmd() values are mixed with additional application specific operations.

       For example an application might call SSL_CONF_cmd() and if it returns -2 (unrecognised command) continue
       with processing of application specific commands.

       Applications can also use SSL_CONF_cmd() to process command lines though the utility function
       SSL_CONF_cmd_argv() is normally used instead. One way to do this is to set the prefix to an appropriate
       value using SSL_CONF_CTX_set1_prefix(), pass the current argument to option and the following argument to
       value (which may be NULL).

       In this case if the return value is positive then it is used to skip that number of arguments as they
       have been processed by SSL_CONF_cmd(). If -2 is returned then option is not recognised and application
       specific arguments can be checked instead. If -3 is returned a required argument is missing and an error
       is indicated. If 0 is returned some other error occurred and this can be reported back to the user.

       The function SSL_CONF_cmd_value_type() can be used by applications to check for the existence of a
       command or to perform additional syntax checking or translation of the command value. For example if the
       return value is SSL_CONF_TYPE_FILE an application could translate a relative pathname to an absolute
       pathname.

RETURN VALUES

       SSL_CONF_cmd() returns 1 if the value of option is recognised and value is NOT used and 2 if both option
       and value are used. In other words it returns the number of arguments processed. This is useful when
       processing command lines.

       A return value of -2 means option is not recognised.

       A return value of -3 means option is recognised and the command requires a value but value is NULL.

       A return code of 0 indicates that both option and value are valid but an error occurred attempting to
       perform the operation: for example due to an error in the syntax of value in this case the error queue
       may provide additional information.

EXAMPLES

       Set supported signature algorithms:

        SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256");

       There are various ways to select the supported protocols.

       This set the minimum protocol version to TLSv1, and so disables SSLv3.  This is the recommended way to
       disable protocols.

        SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1");

       The following also disables SSLv3:

        SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

       The following will first enable all protocols, and then disable SSLv3.  If no protocol versions were
       disabled before this has the same effect as "-SSLv3", but if some versions were disables this will re-
       enable them before disabling SSLv3.

        SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3");

       Only enable TLSv1.2:

        SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1.2");
        SSL_CONF_cmd(ctx, "MaxProtocol", "TLSv1.2");

       This also only enables TLSv1.2:

        SSL_CONF_cmd(ctx, "Protocol", "-ALL,TLSv1.2");

       Disable TLS session tickets:

        SSL_CONF_cmd(ctx, "Options", "-SessionTicket");

       Enable compression:

        SSL_CONF_cmd(ctx, "Options", "Compression");

       Set supported curves to P-256, P-384:

        SSL_CONF_cmd(ctx, "Curves", "P-256:P-384");

HISTORY

       The SSL_CONF_cmd() function was added in OpenSSL 1.0.2.

       The SSL_OP_NO_SSL2 option doesn't have effect since 1.1.0, but the macro is retained for backwards
       compatibility.

       The SSL_CONF_TYPE_NONE was added in OpenSSL 1.1.0. In earlier versions of OpenSSL passing a command which
       didn't take an argument would return SSL_CONF_TYPE_UNKNOWN.

       MinProtocol and MaxProtocol where added in OpenSSL 1.1.0.

       AllowNoDHEKEX and PrioritizeChaCha were added in OpenSSL 1.1.1.

       The UnsafeLegacyServerConnect option is no longer set by default from OpenSSL 3.0.

       The TxCertificateCompression and RxCertificateCompression options were added in OpenSSL 3.2.

       PreferNoDHEKEX was added in OpenSSL 3.3.

COPYRIGHT

       Copyright 2012-2024 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except in compliance
       with the License.  You can obtain a copy in the file LICENSE in the source distribution or at
       <https://www.openssl.org/source/license.html>.