Provided by: libopus-doc_1.5.2-2_all 
NAME
opus_custom - Opus Custom
- Opus Custom is an optional part of the Opus specification and reference implementation which uses a
distinct API from the regular API and supports frame sizes that are not normally supported. Use of Opus
Custom is discouraged for all but very special applications for which a frame size different from 2.5, 5,
10, or 20 ms is needed (for either complexity or latency reasons) and where interoperability is less
important.
SYNOPSIS
Typedefs
typedef struct OpusCustomEncoder OpusCustomEncoder
Contains the state of an encoder.
typedef struct OpusCustomDecoder OpusCustomDecoder
State of the decoder.
typedef struct OpusCustomMode OpusCustomMode
The mode contains all the information necessary to create an encoder.
Functions
OpusCustomMode * opus_custom_mode_create (opus_int32 Fs, int frame_size, int *error)
Creates a new mode struct.
void opus_custom_mode_destroy (OpusCustomMode *mode)
Destroys a mode struct.
int opus_custom_encoder_get_size (const OpusCustomMode *mode, int channels)
Gets the size of an OpusCustomEncoder structure.
OpusCustomEncoder * opus_custom_encoder_create (const OpusCustomMode *mode, int channels, int *error)
Creates a new encoder state.
void opus_custom_encoder_destroy (OpusCustomEncoder *st)
Destroys an encoder state.
int opus_custom_encode_float (OpusCustomEncoder *st, const float *pcm, int frame_size, unsigned char
*compressed, int maxCompressedBytes)
Encodes a frame of audio.
int opus_custom_encode (OpusCustomEncoder *st, const opus_int16 *pcm, int frame_size, unsigned char
*compressed, int maxCompressedBytes)
Encodes a frame of audio.
int opus_custom_encoder_ctl (OpusCustomEncoder *OPUS_RESTRICT st, int request,...)
Perform a CTL function on an Opus custom encoder.
int opus_custom_decoder_get_size (const OpusCustomMode *mode, int channels)
Gets the size of an OpusCustomDecoder structure.
int opus_custom_decoder_init (OpusCustomDecoder *st, const OpusCustomMode *mode, int channels)
Initializes a previously allocated decoder state The memory pointed to by st must be the size
returned by opus_custom_decoder_get_size.
OpusCustomDecoder * opus_custom_decoder_create (const OpusCustomMode *mode, int channels, int *error)
Creates a new decoder state.
void opus_custom_decoder_destroy (OpusCustomDecoder *st)
Destroys a decoder state.
int opus_custom_decode_float (OpusCustomDecoder *st, const unsigned char *data, int len, float *pcm, int
frame_size)
Decode an opus custom frame with floating point output.
int opus_custom_decode (OpusCustomDecoder *st, const unsigned char *data, int len, opus_int16 *pcm, int
frame_size)
Decode an opus custom frame.
int opus_custom_decoder_ctl (OpusCustomDecoder *OPUS_RESTRICT st, int request,...)
Perform a CTL function on an Opus custom decoder.
Detailed Description
Opus Custom is an optional part of the Opus specification and reference implementation which uses a
distinct API from the regular API and supports frame sizes that are not normally supported. Use of Opus
Custom is discouraged for all but very special applications for which a frame size different from 2.5, 5,
10, or 20 ms is needed (for either complexity or latency reasons) and where interoperability is less
important.
In addition to the interoperability limitations the use of Opus custom disables a substantial chunk of
the codec and generally lowers the quality available at a given bitrate. Normally when an application
needs a different frame size from the codec it should buffer to match the sizes but this adds a small
amount of delay which may be important in some very low latency applications. Some transports (especially
constant rate RF transports) may also work best with frames of particular durations.
Libopus only supports custom modes if they are enabled at compile time.
The Opus Custom API is similar to the regular API but the opus_encoder_create and opus_decoder_create
calls take an additional mode parameter which is a structure produced by a call to
opus_custom_mode_create. Both the encoder and decoder must create a mode using the same sample rate (fs)
and frame size (frame size) so these parameters must either be signaled out of band or fixed in a
particular implementation.
Similar to regular Opus the custom modes support on the fly frame size switching, but the sizes available
depend on the particular frame size in use. For some initial frame sizes on a single on the fly size is
available.
Typedef Documentation
typedef struct OpusCustomDecoder OpusCustomDecoder
State of the decoder. One decoder state is needed for each stream. It is initialized once at the
beginning of the stream. Do not re-initialize the state for every frame.
Decoder state
typedef struct OpusCustomEncoder OpusCustomEncoder
Contains the state of an encoder. One encoder state is needed for each stream. It is initialized once at
the beginning of the stream. Do not re-initialize the state for every frame.
Encoder state
typedef struct OpusCustomMode OpusCustomMode
The mode contains all the information necessary to create an encoder. Both the encoder and decoder need
to be initialized with exactly the same mode, otherwise the output will be corrupted. The mode MUST NOT
BE DESTROYED until the encoders and decoders that use it are destroyed as well.
Mode configuration
Function Documentation
int opus_custom_decode (OpusCustomDecoder * st, const unsigned char * data, int len, opus_int16 * pcm, int
frame_size)
Decode an opus custom frame.
Parameters
st OpusCustomDecoder*: Decoder state
data char*: Input payload. Use a NULL pointer to indicate packet loss
len int: Number of bytes in payload
pcm opus_int16*: Output signal (interleaved if 2 channels). length is
frame_size*channels*sizeof(opus_int16)
frame_size Number of samples per channel of available space in *pcm.
Returns
Number of decoded samples or Error codes
int opus_custom_decode_float (OpusCustomDecoder * st, const unsigned char * data, int len, float * pcm, int
frame_size)
Decode an opus custom frame with floating point output.
Parameters
st OpusCustomDecoder*: Decoder state
data char*: Input payload. Use a NULL pointer to indicate packet loss
len int: Number of bytes in payload
pcm float*: Output signal (interleaved if 2 channels). length is frame_size*channels*sizeof(float)
frame_size Number of samples per channel of available space in *pcm.
Returns
Number of decoded samples or Error codes
OpusCustomDecoder * opus_custom_decoder_create (const OpusCustomMode * mode, int channels, int * error)
Creates a new decoder state. Each stream needs its own decoder state (can't be shared across simultaneous
streams).
Parameters
mode OpusCustomMode: Contains all the information about the characteristics of the stream (must be
the same characteristics as used for the encoder)
channels int: Number of channels
error int*: Returns an error code
Returns
Newly created decoder state.
int opus_custom_decoder_ctl (OpusCustomDecoder *OPUS_RESTRICT st, int request, ...)
Perform a CTL function on an Opus custom decoder. Generally the request and subsequent arguments are
generated by a convenience macro.
See also
Generic CTLs
void opus_custom_decoder_destroy (OpusCustomDecoder * st)
Destroys a decoder state.
Parameters
st OpusCustomDecoder*: State to be freed.
int opus_custom_decoder_get_size (const OpusCustomMode * mode, int channels)
Gets the size of an OpusCustomDecoder structure.
Parameters
mode OpusCustomMode *: Mode configuration
channels int: Number of channels
Returns
size
int opus_custom_decoder_init (OpusCustomDecoder * st, const OpusCustomMode * mode, int channels)
Initializes a previously allocated decoder state The memory pointed to by st must be the size returned by
opus_custom_decoder_get_size. This is intended for applications which use their own allocator instead of
malloc.
See also
opus_custom_decoder_create(),opus_custom_decoder_get_size() To reset a previously initialized state
use the OPUS_RESET_STATE CTL.
Parameters
st OpusCustomDecoder*: Decoder state
mode OpusCustomMode *: Contains all the information about the characteristics of the stream (must be
the same characteristics as used for the encoder)
channels int: Number of channels
Returns
OPUS_OK Success or Error codes
int opus_custom_encode (OpusCustomEncoder * st, const opus_int16 * pcm, int frame_size, unsigned char *
compressed, int maxCompressedBytes)
Encodes a frame of audio.
Parameters
st OpusCustomEncoder*: Encoder state
pcm opus_int16*: PCM audio in signed 16-bit format (native endian). There must be exactly frame_size
samples per channel.
frame_size int: Number of samples per frame of input signal
compressed char *: The compressed data is written here. This may not alias pcm and must be at least
maxCompressedBytes long.
maxCompressedBytes int: Maximum number of bytes to use for compressing the frame (can change from one
frame to another)
Returns
Number of bytes written to 'compressed'. If negative, an error has occurred (see error codes). It is
IMPORTANT that the length returned be somehow transmitted to the decoder. Otherwise, no decoding is
possible.
int opus_custom_encode_float (OpusCustomEncoder * st, const float * pcm, int frame_size, unsigned char *
compressed, int maxCompressedBytes)
Encodes a frame of audio.
Parameters
st OpusCustomEncoder*: Encoder state
pcm float*: PCM audio in float format, with a normal range of +/-1.0. Samples with a range beyond
+/-1.0 are supported but will be clipped by decoders using the integer API and should only be used if
it is known that the far end supports extended dynamic range. There must be exactly frame_size
samples per channel.
frame_size int: Number of samples per frame of input signal
compressed char *: The compressed data is written here. This may not alias pcm and must be at least
maxCompressedBytes long.
maxCompressedBytes int: Maximum number of bytes to use for compressing the frame (can change from one
frame to another)
Returns
Number of bytes written to 'compressed'. If negative, an error has occurred (see error codes). It is
IMPORTANT that the length returned be somehow transmitted to the decoder. Otherwise, no decoding is
possible.
OpusCustomEncoder * opus_custom_encoder_create (const OpusCustomMode * mode, int channels, int * error)
Creates a new encoder state. Each stream needs its own encoder state (can't be shared across simultaneous
streams).
Parameters
mode OpusCustomMode*: Contains all the information about the characteristics of the stream (must be
the same characteristics as used for the decoder)
channels int: Number of channels
error int*: Returns an error code
Returns
Newly created encoder state.
int opus_custom_encoder_ctl (OpusCustomEncoder *OPUS_RESTRICT st, int request, ...)
Perform a CTL function on an Opus custom encoder. Generally the request and subsequent arguments are
generated by a convenience macro.
See also
Encoder related CTLs
void opus_custom_encoder_destroy (OpusCustomEncoder * st)
Destroys an encoder state.
Parameters
st OpusCustomEncoder*: State to be freed.
int opus_custom_encoder_get_size (const OpusCustomMode * mode, int channels)
Gets the size of an OpusCustomEncoder structure.
Parameters
mode OpusCustomMode *: Mode configuration
channels int: Number of channels
Returns
size
OpusCustomMode * opus_custom_mode_create (opus_int32 Fs, int frame_size, int * error)
Creates a new mode struct. This will be passed to an encoder or decoder. The mode MUST NOT BE DESTROYED
until the encoders and decoders that use it are destroyed as well.
Parameters
Fs int: Sampling rate (8000 to 96000 Hz)
frame_size int: Number of samples (per channel) to encode in each packet (64 - 1024, prime
factorization must contain zero or more 2s, 3s, or 5s and no other primes)
error int*: Returned error code (if NULL, no error will be returned)
Returns
A newly created mode
void opus_custom_mode_destroy (OpusCustomMode * mode)
Destroys a mode struct. Only call this after all encoders and decoders using this mode are destroyed as
well.
Parameters
mode OpusCustomMode*: Mode to be freed.
Author
Generated automatically by Doxygen for Opus from the source code.