Provided by: nvme-cli_2.11-2_amd64 
NAME
nvme-write - Send an NVMe write command, provide results
SYNOPSIS
nvme-write <device> [--start-block=<slba> | -s <slba>]
[--block-count=<nlb> | -c <nlb>]
[--data-size=<size> | -z <size>]
[--metadata-size=<size> | -y <size>]
[--ref-tag=<reftag> | -r <reftag>]
[--data=<data-file> | -d <data-file>]
[--metadata=<metadata-file> | -M <metadata-file>]
[--prinfo=<prinfo> | -p <prinfo>]
[--app-tag-mask=<appmask> | -m <appmask>]
[--app-tag=<apptag> | -a <apptag>]
[--limited-retry | -l] [--force-unit-access | -f]
[--dir-type=<type> | -T <type>]
[--dir-spec=<spec> | -S <spec>] [--dsm=<dsm> | -D <dsm>]
[--show-command | -V] [--dry-run | -w] [--latency | -t]
[--storage-tag<storage-tag> | -g <storage-tag>]
[--storage-tag-check | -C] [--force]
[--output-format=<fmt> | -o <fmt>] [--verbose | -v]
[--timeout=<timeout>]
DESCRIPTION
The Write command writes the logical blocks specified by the command to the medium from the data data
buffer provided. Will use stdin by default if you don’t provide a file.
OPTIONS
-s <slba>, --start-block=<slba>
Start block.
-c, --block-count
The number of blocks to transfer. This is a zeroes based value to align with the kernel’s use of this
field. (ie. 0 means transfer 1 block).
-z <size>, --data-size=<size>
Size of data, in bytes.
-y <size>, --metadata-size=<size>
Size of metadata in bytes.
-d <data-file>, --data=<data-file>
Data file. If none provided, contents are sent from STDIN.
-M <metadata-file>, --metadata=<metadata-file>
Metadata file, if necessary.
-p <prinfo>, --prinfo=<prinfo>
Protection Information field definition.
┌────┬───────────────────────────────────────┐
│Bit │ Description │
├────┼───────────────────────────────────────┤
│3 │ PRACT: Protection Information Action. │
│ │ When set to 1, PI is │
│ │ stripped/inserted on read/write when │
│ │ the block format’s metadata size is │
│ │ 8. When set to 0, metadata is passes. │
├────┼───────────────────────────────────────┤
│2:0 │ PRCHK: Protection Information Check: │
├────┼───────────────────────────────────────┤
│2 │ Set to 1 enables checking the guard │
│ │ tag │
├────┼───────────────────────────────────────┤
│1 │ Set to 1 enables checking the │
│ │ application tag │
├────┼───────────────────────────────────────┤
│0 │ Set to 1 enables checking the │
│ │ reference tag │
└────┴───────────────────────────────────────┘
-r <reftag>, --ref-tag=<reftag>
Optional reftag when used with protection information.
-m <appmask>, --app-tag-mask=<appmask>
Optional application tag mask when used with protection information.
-a <apptag>, --app-tag=<apptag>
Optional application tag when used with protection information.
-l, --limited-retry
Sets the limited retry flag.
-f, --force-unit-access
Set the force-unit access flag.
-T <type>, --dir-type=<type>
Optional directive type. The nvme-cli only enforces the value be in the defined range for the
directive type, though the NVMe specification (1.3a) defines only one directive, 01h, for write
stream identifiers.
-S <spec>, --dir-spec=<spec>
Optional field for directive specifics. When used with write streams, this value is defined to be the
write stream identifier. The nvme-cli will not validate the stream requested is within the
controller’s capabilities.
-D <dsm>, --dsm=<dsm>
The optional data set management attributes for this command. The argument for this is the least
significant 8 bits of the DSM field in a write command; the most significant 16 bits of the field
come from the directive specific field, if used. This may be used to set attributes for the LBAs
being written, like access frequency, type, latency, among other things, as well as yet to be defined
types. Please consult the NVMe specification for detailed breakdown of how to use this field.
-V, --show-cmd
Print out the command to be sent.
-w, --dry-run
Do not actually send the command. If want to use --dry-run option, --show-cmd option must be set.
Otherwise --dry-run option will be ignored.
-t, --latency
Print out the latency the IOCTL took (in us).
-g <storage-tag>, --storage-tag=<storage-tag>
Variable Sized Expected Logical Block Storage Tag(ELBST).
-C, --storage-tag-check
This flag enables Storage Tag field checking as part of end-to-end data protection processing.
--force
Ignore namespace is currently busy and performed the operation even though.
-o <fmt>, --output-format=<fmt>
Set the reporting format to normal, json or binary. Only one output format can be used at a time.
-v, --verbose
Increase the information detail in the output.
--timeout=<timeout>
Override default timeout value. In milliseconds.
EXAMPLES
No examples yet.
NVME
Part of the nvme-user suite