Provided by: perl-doc_5.40.1-2_all 
NAME
feature - Perl pragma to enable new features
SYNOPSIS
use feature qw(fc say);
# Without the "use feature" above, this code would not be able to find
# the built-ins "say" or "fc":
say "The case-folded version of $x is: " . fc $x;
# set features to match the :5.36 bundle, which may turn off or on
# multiple features (see "FEATURE BUNDLES" below)
use feature ':5.36';
# implicitly loads :5.36 feature bundle
use v5.36;
DESCRIPTION
It is usually impossible to add new syntax to Perl without breaking some existing programs. This pragma
provides a way to minimize that risk. New syntactic constructs, or new semantic meanings to older
constructs, can be enabled by "use feature 'foo'", and will be parsed only when the appropriate feature
pragma is in scope. (Nevertheless, the "CORE::" prefix provides access to all Perl keywords, regardless
of this pragma.)
Lexical effect
Like other pragmas ("use strict", for example), features have a lexical effect. "use feature qw(foo)"
will only make the feature "foo" available from that point to the end of the enclosing block.
{
use feature 'say';
say "say is available here";
}
print "But not here.\n";
"no feature"
Features can also be turned off by using "no feature "foo"". This too has lexical effect.
use feature 'say';
say "say is available here";
{
no feature 'say';
print "But not here.\n";
}
say "Yet it is here.";
"no feature" with no features specified will reset to the default group. To disable all features (an
unusual request!) use "no feature ':all'".
AVAILABLE FEATURES
Read "FEATURE BUNDLES" for the feature cheat sheet summary.
The 'say' feature
"use feature 'say'" tells the compiler to enable the Raku-inspired "say" function.
See "say" in perlfunc for details.
This feature is available starting with Perl 5.10.
The 'state' feature
"use feature 'state'" tells the compiler to enable "state" variables.
See "Persistent Private Variables" in perlsub for details.
This feature is available starting with Perl 5.10.
The 'switch' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::smartmatch";
"use feature 'switch'" tells the compiler to enable the Raku given/when construct.
See "Switch Statements" in perlsyn for details.
This feature is available starting with Perl 5.10. It is deprecated starting with Perl 5.38, and using
"given", "when" or smartmatch will throw a warning. It will be removed in Perl 5.42.
The 'unicode_strings' feature
"use feature 'unicode_strings'" tells the compiler to use Unicode rules in all string operations executed
within its scope (unless they are also within the scope of either "use locale" or "use bytes"). The same
applies to all regular expressions compiled within the scope, even if executed outside it. It does not
change the internal representation of strings, but only how they are interpreted.
"no feature 'unicode_strings'" tells the compiler to use the traditional Perl rules wherein the native
character set rules is used unless it is clear to Perl that Unicode is desired. This can lead to some
surprises when the behavior suddenly changes. (See "The "Unicode Bug"" in perlunicode for details.) For
this reason, if you are potentially using Unicode in your program, the "use feature 'unicode_strings'"
subpragma is strongly recommended.
This feature is available starting with Perl 5.12; was almost fully implemented in Perl 5.14; and
extended in Perl 5.16 to cover "quotemeta"; was extended further in Perl 5.26 to cover the range
operator; and was extended again in Perl 5.28 to cover special-cased whitespace splitting.
The 'unicode_eval' and 'evalbytes' features
Together, these two features are intended to replace the legacy string "eval" function, which behaves
problematically in some instances. They are available starting with Perl 5.16, and are enabled by
default by a "use 5.16" or higher declaration.
"unicode_eval" changes the behavior of plain string "eval" to work more consistently, especially in the
Unicode world. Certain (mis)behaviors couldn't be changed without breaking some things that had come to
rely on them, so the feature can be enabled and disabled. Details are at "Under the "unicode_eval"
feature" in perlfunc.
"evalbytes" is like string "eval", but it treats its argument as a byte string. Details are at "evalbytes
EXPR" in perlfunc. Without a "use feature 'evalbytes'" nor a "use v5.16" (or higher) declaration in the
current scope, you can still access it by instead writing "CORE::evalbytes".
The 'current_sub' feature
This provides the "__SUB__" token that returns a reference to the current subroutine or "undef" outside
of a subroutine.
This feature is available starting with Perl 5.16.
The 'array_base' feature
This feature supported the legacy $[ variable. See "$[" in perlvar. It was on by default but disabled
under "use v5.16" (see "IMPLICIT LOADING", below) and unavailable since perl 5.30.
This feature is available under this name starting with Perl 5.16. In previous versions, it was simply
on all the time, and this pragma knew nothing about it.
The 'fc' feature
"use feature 'fc'" tells the compiler to enable the "fc" function, which implements Unicode casefolding.
See "fc" in perlfunc for details.
This feature is available from Perl 5.16 onwards.
The 'lexical_subs' feature
In Perl versions prior to 5.26, this feature enabled declaration of subroutines via "my sub foo", "state
sub foo" and "our sub foo" syntax. See "Lexical Subroutines" in perlsub for details.
This feature is available from Perl 5.18 onwards. From Perl 5.18 to 5.24, it was classed as
experimental, and Perl emitted a warning for its usage, except when explicitly disabled:
no warnings "experimental::lexical_subs";
As of Perl 5.26, use of this feature no longer triggers a warning, though the
"experimental::lexical_subs" warning category still exists (for compatibility with code that disables
it). In addition, this syntax is not only no longer experimental, but it is enabled for all Perl code,
regardless of what feature declarations are in scope.
The 'postderef' and 'postderef_qq' features
The 'postderef_qq' feature extends the applicability of postfix dereference syntax so that postfix array
dereference, postfix scalar dereference, and postfix array highest index access are available in double-
quotish interpolations. For example, it makes the following two statements equivalent:
my $s = "[@{ $h->{a} }]";
my $s = "[$h->{a}->@*]";
This feature is available from Perl 5.20 onwards. In Perl 5.20 and 5.22, it was classed as experimental,
and Perl emitted a warning for its usage, except when explicitly disabled:
no warnings "experimental::postderef";
As of Perl 5.24, use of this feature no longer triggers a warning, though the "experimental::postderef"
warning category still exists (for compatibility with code that disables it).
The 'postderef' feature was used in Perl 5.20 and Perl 5.22 to enable postfix dereference syntax outside
double-quotish interpolations. In those versions, using it triggered the "experimental::postderef"
warning in the same way as the 'postderef_qq' feature did. As of Perl 5.24, this syntax is not only no
longer experimental, but it is enabled for all Perl code, regardless of what feature declarations are in
scope.
The 'signatures' feature
This enables syntax for declaring subroutine arguments as lexical variables. For example, for this
subroutine:
sub foo ($left, $right) {
return $left + $right;
}
Calling "foo(3, 7)" will assign 3 into $left and 7 into $right.
See "Signatures" in perlsub for details.
This feature is available from Perl 5.20 onwards. From Perl 5.20 to 5.34, it was classed as experimental,
and Perl emitted a warning for its usage, except when explicitly disabled:
no warnings "experimental::signatures";
As of Perl 5.36, use of this feature no longer triggers a warning, though the "experimental::signatures"
warning category still exists (for compatibility with code that disables it). This feature is now
considered stable, and is enabled automatically by "use v5.36" (or higher).
The 'refaliasing' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::refaliasing";
This enables aliasing via assignment to references:
\$a = \$b; # $a and $b now point to the same scalar
\@a = \@b; # to the same array
\%a = \%b;
\&a = \&b;
foreach \%hash (@array_of_hash_refs) {
...
}
See "Assigning to References" in perlref for details.
This feature is available from Perl 5.22 onwards.
The 'bitwise' feature
This makes the four standard bitwise operators ("& | ^ ~") treat their operands consistently as numbers,
and introduces four new dotted operators ("&. |. ^. ~.") that treat their operands consistently as
strings. The same applies to the assignment variants ("&= |= ^= &.= |.= ^.=").
See "Bitwise String Operators" in perlop for details.
This feature is available from Perl 5.22 onwards. Starting in Perl 5.28, "use v5.28" will enable the
feature. Before 5.28, it was still experimental and would emit a warning in the "experimental::bitwise"
category.
The 'declared_refs' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::declared_refs";
This allows a reference to a variable to be declared with "my", "state", or "our", or localized with
"local". It is intended mainly for use in conjunction with the "refaliasing" feature. See "Declaring a
Reference to a Variable" in perlref for examples.
This feature is available from Perl 5.26 onwards.
The 'isa' feature
This allows the use of the "isa" infix operator, which tests whether the scalar given by the left operand
is an object of the class given by the right operand. See "Class Instance Operator" in perlop for more
details.
This feature is available from Perl 5.32 onwards. From Perl 5.32 to 5.34, it was classed as
experimental, and Perl emitted a warning for its usage, except when explicitly disabled:
no warnings "experimental::isa";
As of Perl 5.36, use of this feature no longer triggers a warning (though the "experimental::isa" warning
category still exists for compatibility with code that disables it). This feature is now considered
stable, and is enabled automatically by "use v5.36" (or higher).
The 'indirect' feature
This feature allows the use of indirect object syntax for method calls, e.g. "new Foo 1, 2;". It is
enabled by default, but can be turned off to disallow indirect object syntax.
This feature is available under this name from Perl 5.32 onwards. In previous versions, it was simply on
all the time. To disallow (or warn on) indirect object syntax on older Perls, see the indirect CPAN
module.
The 'multidimensional' feature
This feature enables multidimensional array emulation, a perl 4 (or earlier) feature that was used to
emulate multidimensional arrays with hashes. This works by converting code like $foo{$x, $y} into
$foo{join($;, $x, $y)}. It is enabled by default, but can be turned off to disable multidimensional
array emulation.
When this feature is disabled the syntax that is normally replaced will report a compilation error.
This feature is available under this name from Perl 5.34 onwards. In previous versions, it was simply on
all the time.
You can use the multidimensional module on CPAN to disable multidimensional array emulation for older
versions of Perl.
The 'bareword_filehandles' feature
This feature enables bareword filehandles for builtin functions operations, a generally discouraged
practice. It is enabled by default, but can be turned off to disable bareword filehandles, except for
the exceptions listed below.
The perl built-in filehandles "STDIN", "STDOUT", "STDERR", "DATA", "ARGV", "ARGVOUT" and the special "_"
are always enabled.
This feature is available under this name from Perl 5.34 onwards. In previous versions it was simply on
all the time.
You can use the bareword::filehandles module on CPAN to disable bareword filehandles for older versions
of perl.
The 'try' feature
WARNING: This feature is still partly experimental, and the implementation may change or be removed in
future versions of Perl.
This feature enables the "try" and "catch" syntax, which allows exception handling, where exceptions
thrown from the body of the block introduced with "try" are caught by executing the body of the "catch"
block.
This feature is available starting in Perl 5.34. Before Perl 5.40 it was classed as experimental, and
Perl emitted a warning for its usage, except when explicitly disabled:
no warnings "experimental::try";
As of Perl 5.40, use of this feature without a "finally" block no longer triggers a warning. The
optional "finally" block is still considered experimental and emits a warning, except when explicitly
disabled as above.
For more information, see "Try Catch Exception Handling" in perlsyn.
The 'defer' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::defer";
This feature enables the "defer" block syntax, which allows a block of code to be deferred until when the
flow of control leaves the block which contained it. For more details, see "defer" in perlsyn.
This feature is available starting in Perl 5.36.
The 'extra_paired_delimiters' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::extra_paired_delimiters";
This feature enables the use of more paired string delimiters than the traditional four, "< >", "( )",
"{ }", and "[ ]". When this feature is on, for example, you can say "qr«pat»".
As with any usage of non-ASCII delimiters in a UTF-8-encoded source file, you will want to ensure the
parser will decode the source code from UTF-8 bytes with a declaration such as "use utf8".
This feature is available starting in Perl 5.36.
For a full list of the available characters, see "List of Extra Paired Delimiters" in perlop.
The 'module_true' feature
This feature removes the need to return a true value at the end of a module loaded with "require" or
"use". Any errors during compilation will cause failures, but reaching the end of the module when this
feature is in effect will prevent "perl" from throwing an exception that the module "did not return a
true value".
The 'class' feature
WARNING: This feature is still experimental and the implementation may change or be removed in future
versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly
disabled the warning:
no warnings "experimental::class";
This feature enables the "class" block syntax and other associated keywords which implement the "new"
object system, previously codenamed "Corinna".
FEATURE BUNDLES
It's possible to load multiple features together, using a feature bundle. The name of a feature bundle
is prefixed with a colon, to distinguish it from an actual feature.
use feature ":5.10";
The following feature bundles are available:
bundle features included
--------- -----------------
:default indirect multidimensional
bareword_filehandles
:5.10 bareword_filehandles indirect
multidimensional say state switch
:5.12 bareword_filehandles indirect
multidimensional say state switch
unicode_strings
:5.14 bareword_filehandles indirect
multidimensional say state switch
unicode_strings
:5.16 bareword_filehandles current_sub evalbytes
fc indirect multidimensional say state
switch unicode_eval unicode_strings
:5.18 bareword_filehandles current_sub evalbytes
fc indirect multidimensional say state
switch unicode_eval unicode_strings
:5.20 bareword_filehandles current_sub evalbytes
fc indirect multidimensional say state
switch unicode_eval unicode_strings
:5.22 bareword_filehandles current_sub evalbytes
fc indirect multidimensional say state
switch unicode_eval unicode_strings
:5.24 bareword_filehandles current_sub evalbytes
fc indirect multidimensional postderef_qq
say state switch unicode_eval
unicode_strings
:5.26 bareword_filehandles current_sub evalbytes
fc indirect multidimensional postderef_qq
say state switch unicode_eval
unicode_strings
:5.28 bareword_filehandles bitwise current_sub
evalbytes fc indirect multidimensional
postderef_qq say state switch unicode_eval
unicode_strings
:5.30 bareword_filehandles bitwise current_sub
evalbytes fc indirect multidimensional
postderef_qq say state switch unicode_eval
unicode_strings
:5.32 bareword_filehandles bitwise current_sub
evalbytes fc indirect multidimensional
postderef_qq say state switch unicode_eval
unicode_strings
:5.34 bareword_filehandles bitwise current_sub
evalbytes fc indirect multidimensional
postderef_qq say state switch unicode_eval
unicode_strings
:5.36 bareword_filehandles bitwise current_sub
evalbytes fc isa postderef_qq say signatures
state unicode_eval unicode_strings
:5.38 bitwise current_sub evalbytes fc isa
module_true postderef_qq say signatures
state unicode_eval unicode_strings
:5.40 bitwise current_sub evalbytes fc isa
module_true postderef_qq say signatures
state try unicode_eval unicode_strings
The ":default" bundle represents the feature set that is enabled before any "use feature" or "no feature"
declaration.
Specifying sub-versions such as the 0 in 5.14.0 in feature bundles has no effect. Feature bundles are
guaranteed to be the same for all sub-versions.
use feature ":5.14.0"; # same as ":5.14"
use feature ":5.14.1"; # same as ":5.14"
You can also do:
use feature ":all";
or
no feature ":all";
but the first may enable features in a later version of Perl that change the meaning of your code, and
the second may disable mechanisms that are part of Perl's current behavior that have been turned into
features, just as "indirect" and "bareword_filehandles" were.
IMPLICIT LOADING
Instead of loading feature bundles by name, it is easier to let Perl do implicit loading of a feature
bundle for you.
There are two ways to load the "feature" pragma implicitly:
• By using the "-E" switch on the Perl command-line instead of "-e". That will enable the feature
bundle for that version of Perl in the main compilation unit (that is, the one-liner that follows
"-E").
• By explicitly requiring a minimum Perl version number for your program, with the "use VERSION"
construct. That is,
use v5.36.0;
will do an implicit
no feature ':all';
use feature ':5.36';
and so on. Note how the trailing sub-version is automatically stripped from the version.
But to avoid portability warnings (see "use" in perlfunc), you may prefer:
use 5.036;
with the same effect.
If the required version is older than Perl 5.10, the ":default" feature bundle is automatically
loaded instead.
Unlike "use feature ":5.12"", saying "use v5.12" (or any higher version) also does the equivalent of
"use strict"; see "use" in perlfunc for details.
CHECKING FEATURES
"feature" provides some simple APIs to check which features are enabled.
These functions cannot be imported and must be called by their fully qualified names. If you don't
otherwise need to set a feature you will need to ensure "feature" is loaded with:
use feature ();
feature_enabled($feature)
feature_enabled($feature, $depth)
package MyStandardEnforcer;
use feature ();
use Carp "croak";
sub import {
croak "disable indirect!" if feature::feature_enabled("indirect");
}
Test whether a named feature is enabled at a given level in the call stack, returning a true value if
it is. $depth defaults to 1, which checks the scope that called the scope calling
feature::feature_enabled().
croaks for an unknown feature name.
features_enabled()
features_enabled($depth)
package ReportEnabledFeatures;
use feature "say";
sub import {
say STDERR join " ", feature::features_enabled();
}
Returns a list of the features enabled at a given level in the call stack. $depth defaults to 1,
which checks the scope that called the scope calling feature::features_enabled().
feature_bundle()
feature_bundle($depth)
Returns the feature bundle, if any, selected at a given level in the call stack. $depth defaults to
1, which checks the scope that called the scope calling feature::feature_bundle().
Returns an undefined value if no feature bundle is selected in the scope.
The bundle name returned will be for the earliest bundle matching the selected bundle, so:
use feature ();
use v5.12;
BEGIN { print feature::feature_bundle(0); }
will print 5.11.
This returns internal state, at this point "use v5.12;" sets the feature bundle, but " use feature
":5.12"; " does not set the feature bundle. This may change in a future release of perl.