Provided by: tcl9.0-doc_9.0.1+dfsg-1_all 
NAME
namespace - create and manipulate contexts for commands and variables
SYNOPSIS
namespace subcommand ?arg ...? ________________________________________________________________________________________________________________
DESCRIPTION
The namespace command lets you create, access, and destroy separate contexts for commands and variables.
See the section WHAT IS A NAMESPACE? below for a brief overview of namespaces. The legal values of
subcommand are listed below. Note that you can abbreviate the subcommands.
namespace children ?namespace? ?pattern?
Returns a list of all child namespaces that belong to the namespace namespace. If namespace is
not specified, then the children are returned for the current namespace. This command returns
fully-qualified names, which start with a double colon (::). If the optional pattern is given,
then this command returns only the names that match the glob-style pattern. The actual pattern
used is determined as follows: a pattern that starts with double colon (::) is used directly,
otherwise the namespace namespace (or the fully-qualified name of the current namespace) is
prepended onto the pattern.
namespace code script
Captures the current namespace context for later execution of the script script. It returns a new
script in which script has been wrapped in a namespace inscope command. The new script has two
important properties. First, it can be evaluated in any namespace and will cause script to be
evaluated in the current namespace (the one where the namespace code command was invoked).
Second, additional arguments can be appended to the resulting script and they will be passed to
script as additional arguments. For example, suppose the command set script [namespace code {foo
bar}] is invoked in namespace ::a::b. Then eval $script [list x y] can be executed in any
namespace (assuming the value of script has been passed in properly) and will have the same effect
as the command ::namespace eval ::a::b {foo bar x y}. This command is needed because extensions
like Tk normally execute callback scripts in the global namespace. A scoped command captures a
command together with its namespace context in a way that allows it to be executed properly later.
See the section SCOPED SCRIPTS for some examples of how this is used to create callback scripts.
namespace current
Returns the fully-qualified name for the current namespace. The actual name of the global
namespace is “” (i.e., an empty string), but this command returns :: for the global namespace as a
convenience to programmers.
namespace delete ?namespace namespace ...?
Each namespace namespace is deleted and all variables, procedures, and child namespaces contained
in the namespace are deleted. If a procedure is currently executing inside the namespace, the
namespace will be kept alive until the procedure returns; however, the namespace is marked to
prevent other code from looking it up by name. If a namespace does not exist, this command
returns an error. If no namespace names are given, this command does nothing.
namespace ensemble subcommand ?arg ...?
Creates and manipulates a command that is formed out of an ensemble of subcommands. See the
section ENSEMBLES below for further details.
namespace eval namespace arg ?arg ...?
Activates a namespace called namespace and evaluates some code in that context. If the namespace
does not already exist, it is created. If more than one arg argument is specified, the arguments
are concatenated together with a space between each one in the same fashion as the eval command,
and the result is evaluated.
If namespace has leading namespace qualifiers and any leading namespaces do not exist, they are
automatically created.
namespace exists namespace
Returns 1 if namespace is a valid namespace in the current context, returns 0 otherwise.
namespace export ?-clear? ?pattern pattern ...?
Specifies which commands are exported from a namespace. The exported commands are those that can
be later imported into another namespace using a namespace import command. Both commands defined
in a namespace and commands the namespace has previously imported can be exported by a namespace.
The commands do not have to be defined at the time the namespace export command is executed. Each
pattern may contain glob-style special characters, but it may not include any namespace
qualifiers. That is, the pattern can only specify commands in the current (exporting) namespace.
Each pattern is appended onto the namespace's list of export patterns. If the -clear flag is
given, the namespace's export pattern list is reset to empty before any pattern arguments are
appended. If no patterns are given and the -clear flag is not given, this command returns the
namespace's current export list.
namespace forget ?pattern pattern ...?
Removes previously imported commands from a namespace. Each pattern is a simple or qualified name
such as x, foo::x or a::b::p*. Qualified names contain double colons (::) and qualify a name with
the name of one or more namespaces. Each “qualified pattern” is qualified with the name of an
exporting namespace and may have glob-style special characters in the command name at the end of
the qualified name. Glob characters may not appear in a namespace name. For each “simple
pattern” this command deletes the matching commands of the current namespace that were imported
from a different namespace. For “qualified patterns”, this command first finds the matching
exported commands. It then checks whether any of those commands were previously imported by the
current namespace. If so, this command deletes the corresponding imported commands. In effect,
this undoes the action of a namespace import command.
namespace import ?-force? ?pattern pattern ...?
Imports commands into a namespace, or queries the set of imported commands in a namespace. When
no arguments are present, namespace import returns the list of commands in the current namespace
that have been imported from other namespaces. The commands in the returned list are in the
format of simple names, with no namespace qualifiers at all. This format is suitable for
composition with namespace forget (see EXAMPLES below).
When pattern arguments are present, each pattern is a qualified name like foo::x or a::p*. That
is, it includes the name of an exporting namespace and may have glob-style special characters in
the command name at the end of the qualified name. Glob characters may not appear in a namespace
name. When the namespace name is not fully qualified (i.e., does not start with a namespace
separator) it is resolved as a namespace name in the way described in the NAME RESOLUTION section;
it is an error if no namespace with that name can be found.
All the commands that match a pattern string and which are currently exported from their namespace
are added to the current namespace. This is done by creating a new command in the current
namespace that points to the exported command in its original namespace; when the new imported
command is called, it invokes the exported command. This command normally returns an error if an
imported command conflicts with an existing command. However, if the -force option is given,
imported commands will silently replace existing commands. The namespace import command has
snapshot semantics: that is, only requested commands that are currently defined in the exporting
namespace are imported. In other words, you can import only the commands that are in a namespace
at the time when the namespace import command is executed. If another command is defined and
exported in this namespace later on, it will not be imported.
namespace inscope namespace script ?arg ...?
Executes a script in the context of the specified namespace. This command is not expected to be
used directly by programmers; calls to it are generated implicitly when applications use namespace
code commands to create callback scripts that the applications then register with, e.g., Tk
widgets. The namespace inscope command is much like the namespace eval command except that the
namespace must already exist, and namespace inscope appends additional args as proper list
elements.
namespace inscope ::foo $script $x $y $z
is equivalent to
namespace eval ::foo [concat $script [list $x $y $z]]
thus additional arguments will not undergo a second round of substitution, as is the case with
namespace eval.
namespace origin command
Returns the fully-qualified name of the original command to which the imported command command
refers. When a command is imported into a namespace, a new command is created in that namespace
that points to the actual command in the exporting namespace. If a command is imported into a
sequence of namespaces a, b,...,n where each successive namespace just imports the command from
the previous namespace, this command returns the fully-qualified name of the original command in
the first namespace, a. If command does not refer to an imported command, the command's own
fully-qualified name is returned.
namespace parent ?namespace?
Returns the fully-qualified name of the parent namespace for namespace namespace. If namespace is
not specified, the fully-qualified name of the current namespace's parent is returned.
namespace path ?namespaceList?
Returns the command resolution path of the current namespace. If namespaceList is specified as a
list of named namespaces, the current namespace's command resolution path is set to those
namespaces and returns the empty list. The default command resolution path is always empty. See
the section NAME RESOLUTION below for an explanation of the rules regarding name resolution.
namespace qualifiers string
Returns any leading namespace qualifiers for string. Qualifiers are namespace names separated by
double colons (::). For the string ::foo::bar::x, this command returns ::foo::bar, and for :: it
returns an empty string. This command is the complement of the namespace tail command. It does
not check whether the namespace names are, in fact, the names of currently defined namespaces.
namespace tail string
Returns the simple name at the end of a qualified string. Qualifiers are namespace names
separated by double colons (::). For the string ::foo::bar::x, this command returns x, and for ::
it returns an empty string. This command is the complement of the namespace qualifiers command.
It does not check whether the namespace names are, in fact, the names of currently defined
namespaces.
namespace upvar namespace ?otherVar myVar ...?
This command arranges for zero or more local variables in the current procedure to refer to
variables in namespace. The namespace name is resolved as described in section NAME RESOLUTION.
The command namespace upvar $ns a b has the same behaviour as upvar 0 ${ns}::a b, with the sole
exception of the resolution rules used for qualified namespace or variable names. namespace upvar
returns an empty string.
namespace unknown ?script?
Sets or returns the unknown command handler for the current namespace. The handler is invoked
when a command called from within the namespace cannot be found in the current namespace, the
namespace's path nor in the global namespace. The script argument, if given, should be a well
formed list representing a command name and optional arguments. When the handler is invoked, the
full invocation line will be appended to the script and the result evaluated in the context of the
namespace. The default handler for all namespaces is ::unknown. If no argument is given, it
returns the handler for the current namespace.
namespace which ?-command? ?-variable? name
Looks up name as either a command or variable and returns its fully-qualified name. For example,
if name does not exist in the current namespace but does exist in the global namespace, this
command returns a fully-qualified name in the global namespace. If the command or variable does
not exist, this command returns an empty string. If the variable has been created but not
defined, such as with the variable command or through a trace on the variable, this command will
return the fully-qualified name of the variable. If no flag is given, name is treated as a
command name. See the section NAME RESOLUTION below for an explanation of the rules regarding
name resolution.
WHAT IS A NAMESPACE?
A namespace is a collection of commands and variables. It encapsulates the commands and variables to
ensure that they will not interfere with the commands and variables of other namespaces. Tcl has always
had one such collection, which we refer to as the global namespace. The global namespace holds all
global variables and commands. The namespace eval command lets you create new namespaces. For example,
namespace eval Counter {
namespace export bump
variable num 0
proc bump {} {
variable num
incr num
}
}
creates a new namespace containing the variable num and the procedure bump. The commands and variables
in this namespace are separate from other commands and variables in the same program. If there is a
command named bump in the global namespace, for example, it will be different from the command bump in
the Counter namespace.
Namespace variables resemble global variables in Tcl. They exist outside of the procedures in a
namespace but can be accessed in a procedure via the variable command, as shown in the example above.
Namespaces are dynamic. You can add and delete commands and variables at any time, so you can build up
the contents of a namespace over time using a series of namespace eval commands. For example, the
following series of commands has the same effect as the namespace definition shown above:
namespace eval Counter {
variable num 0
proc bump {} {
variable num
return [incr num]
}
}
namespace eval Counter {
proc test {args} {
return $args
}
}
namespace eval Counter {
rename test ""
}
Note that the test procedure is added to the Counter namespace, and later removed via the rename command.
Namespaces can have other namespaces within them, so they nest hierarchically. A nested namespace is
encapsulated inside its parent namespace and can not interfere with other namespaces.
QUALIFIED NAMES
Each namespace has a textual name such as history or ::safe::interp. Since namespaces may nest,
qualified names are used to refer to commands, variables, and child namespaces contained inside
namespaces. Qualified names are similar to the hierarchical path names for Unix files or Tk widgets,
except that :: is used as the separator instead of / or .. The topmost or global namespace has the name
“” (i.e., an empty string), although :: is a synonym. As an example, the name ::safe::interp::create
refers to the command create in the namespace interp that is a child of namespace ::safe, which in turn
is a child of the global namespace, ::.
If you want to access commands and variables from another namespace, you must use some extra syntax.
Names must be qualified by the namespace that contains them. From the global namespace, we might access
the Counter procedures like this:
Counter::bump 5
Counter::Reset
We could access the current count like this:
puts "count = $Counter::num"
When one namespace contains another, you may need more than one qualifier to reach its elements. If we
had a namespace Foo that contained the namespace Counter, you could invoke its bump procedure from the
global namespace like this:
Foo::Counter::bump 3
You can also use qualified names when you create and rename commands. For example, you could add a
procedure to the Foo namespace like this:
proc Foo::Test {args} {return $args}
And you could move the same procedure to another namespace like this:
rename Foo::Test Bar::Test
There are a few remaining points about qualified names that we should cover. Namespaces have nonempty
names except for the global namespace. :: is disallowed in simple command, variable, and namespace names
except as a namespace separator. Extra colons in any separator part of a qualified name are ignored;
i.e. two or more colons are treated as a namespace separator. A trailing :: in a qualified variable or
command name refers to the variable or command named {}. However, a trailing :: in a qualified namespace
name is ignored.
NAME RESOLUTION
In general, all Tcl commands that take variable and command names support qualified names. This means
you can give qualified names to such commands as set, proc, rename, and interp alias. If you provide a
fully-qualified name that starts with a ::, there is no question about what command, variable, or
namespace you mean. However, if the name does not start with a :: (i.e., is relative), Tcl follows basic
rules for looking it up:
• Variable names are always resolved starting in the current namespace. In the absence of special
resolvers, foo::bar::baz refers to a variable named "baz" in a namespace named "bar" that is a
child of a namespace named "foo" that is a child of the current namespace of the interpreter.
• Command names are always resolved by looking in the current namespace first. If not found there,
they are searched for in every namespace on the current namespace's command path (which is empty
by default). If not found there, command names are looked up in the global namespace (or, failing
that, are processed by the appropriate namespace unknown handler.)
• Namespace names are always resolved by looking in only the current namespace.
In the following example,
set traceLevel 0
namespace eval Debug {
printTrace $traceLevel
}
Tcl looks for traceLevel in the namespace Debug. It looks up the command printTrace in the same way. If
a variable or command name is not found, the name is undefined. To make this point absolutely clear,
consider the following example:
set traceLevel 0
namespace eval Foo {
variable traceLevel 3
namespace eval Debug {
printTrace $traceLevel
}
}
Here Tcl looks for traceLevel in the namespace Foo::Debug. The variables Foo::traceLevel and
Foo::Debug::traceLevel are completely ignored during the name resolution process.
You can use the namespace which command to clear up any question about name resolution. For example, the
command:
namespace eval Foo::Debug {namespace which -variable traceLevel}
returns the empty string. The command,
namespace eval Foo {namespace which -variable traceLevel}
returns the empty string as well.
As mentioned above, namespace names and variables are looked up differently than the names of commands.
Namespace names and variables are always resolved in the current namespace. This means, for example,
that a namespace eval command that creates a new namespace always creates a child of the current
namespace unless the new namespace name begins with ::.
Tcl has no access control to limit what variables, commands, or namespaces you can reference. If you
provide a qualified name that resolves to an element by the name resolution rule above, you can access
the element.
You can access a namespace variable from a procedure in the same namespace by using the variable command.
Much like the global command, this creates a local link to the namespace variable. If necessary, it also
creates the variable in the current namespace and initializes it. Note that the global command only
creates links to variables in the global namespace. It is not necessary to use a variable command if you
always refer to the namespace variable using an appropriate qualified name.
IMPORTING COMMANDS
Namespaces are often used to represent libraries. Some library commands are used so frequently that it
is a nuisance to type their qualified names. For example, suppose that all of the commands in a package
like BLT are contained in a namespace called Blt. Then you might access these commands like this:
Blt::graph .g -background red
Blt::table . .g 0,0
If you use the graph and table commands frequently, you may want to access them without the Blt:: prefix.
You can do this by importing the commands into the current namespace, like this:
namespace import Blt::*
This adds all exported commands from the Blt namespace into the current namespace context, so you can
write code like this:
graph .g -background red
table . .g 0,0
The namespace import command only imports commands from a namespace that that namespace exported with a
namespace export command.
Importing every command from a namespace is generally a bad idea since you do not know what you will get.
It is better to import just the specific commands you need. For example, the command
namespace import Blt::graph Blt::table
imports only the graph and table commands into the current context.
If you try to import a command that already exists, you will get an error. This prevents you from
importing the same command from two different packages. But from time to time (perhaps when debugging),
you may want to get around this restriction. You may want to reissue the namespace import command to
pick up new commands that have appeared in a namespace. In that case, you can use the -force option, and
existing commands will be silently overwritten:
namespace import -force Blt::graph Blt::table
If for some reason, you want to stop using the imported commands, you can remove them with a namespace
forget command, like this:
namespace forget Blt::*
This searches the current namespace for any commands imported from Blt. If it finds any, it removes
them. Otherwise, it does nothing. After this, the Blt commands must be accessed with the Blt:: prefix.
When you delete a command from the exporting namespace like this:
rename Blt::graph ""
the command is automatically removed from all namespaces that import it.
EXPORTING COMMANDS
You can export commands from a namespace like this:
namespace eval Counter {
namespace export bump reset
variable Num 0
variable Max 100
proc bump {{by 1}} {
variable Num
incr Num $by
Check
return $Num
}
proc reset {} {
variable Num
set Num 0
}
proc Check {} {
variable Num
variable Max
if {$Num > $Max} {
error "too high!"
}
}
}
The procedures bump and reset are exported, so they are included when you import from the Counter
namespace, like this:
namespace import Counter::*
However, the Check procedure is not exported, so it is ignored by the import operation.
The namespace import command only imports commands that were declared as exported by their namespace.
The namespace export command specifies what commands may be imported by other namespaces. If a namespace
import command specifies a command that is not exported, the command is not imported.
SCOPED SCRIPTS
The namespace code command is the means by which a script may be packaged for evaluation in a namespace
other than the one in which it was created. It is used most often to create event handlers, Tk bindings,
and traces for evaluation in the global context. For instance, the following code indicates how to
direct a variable trace callback into the current namespace:
namespace eval a {
variable b
proc theTraceCallback { n1 n2 op } {
upvar 1 $n1 var
puts "the value of $n1 has changed to $var"
return
}
trace add variable b write [namespace code theTraceCallback]
}
set a::b c
When executed, it prints the message:
the value of a::b has changed to c
ENSEMBLES
The namespace ensemble is used to create and manipulate ensemble commands, which are commands formed by
grouping subcommands together. The commands typically come from the current namespace when the ensemble
was created, though this is configurable. Note that there may be any number of ensembles associated with
any namespace (including none, which is true of all namespaces by default), though all the ensembles
associated with a namespace are deleted when that namespace is deleted. The link between an ensemble
command and its namespace is maintained however the ensemble is renamed.
Three subcommands of the namespace ensemble command are defined:
namespace ensemble create ?option value ...?
Creates a new ensemble command linked to the current namespace, returning the fully qualified name
of the command created. The arguments to namespace ensemble create allow the configuration of the
command as if with the namespace ensemble configure command. If not overridden with the -command
option, this command creates an ensemble with exactly the same name as the linked namespace. See
the section ENSEMBLE OPTIONS below for a full list of options supported and their effects.
namespace ensemble configure command ?option? ?value ...?
Retrieves the value of an option associated with the ensemble command named command, or updates
some options associated with that ensemble command. See the section ENSEMBLE OPTIONS below for a
full list of options supported and their effects.
namespace ensemble exists command
Returns a boolean value that describes whether the command command exists and is an ensemble
command. This command only ever returns an error if the number of arguments to the command is
wrong.
When called, an ensemble command takes its first argument and looks it up (according to the rules
described below) to discover a list of words to replace the ensemble command and subcommand with. The
resulting list of words is then evaluated (with no further substitutions) as if that was what was typed
originally (i.e. by passing the list of words through Tcl_EvalObjv) and returning the result of the
command. Note that it is legal to make the target of an ensemble rewrite be another (or even the same)
ensemble command. The ensemble command will not be visible through the use of the uplevel or info level
commands.
ENSEMBLE OPTIONS
The following options, supported by the namespace ensemble create and namespace ensemble configure
commands, control how an ensemble command behaves:
-map When non-empty, this option supplies a dictionary that provides a mapping from subcommand names to
a list of prefix words to substitute in place of the ensemble command and subcommand words (in a
manner similar to an alias created with interp alias; the words are not reparsed after
substitution); if the first word of any target is not fully qualified when set, it is assumed to
be relative to the current namespace and changed to be exactly that (that is, it is always fully
qualified when read). When this option is empty, the mapping will be from the local name of the
subcommand to its fully-qualified name. Note that when this option is non-empty and the
-subcommands option is empty, the ensemble subcommand names will be exactly those words that have
mappings in the dictionary.
-parameters
This option gives a list of named arguments (the names being used during generation of error
messages) that are passed by the caller of the ensemble between the name of the ensemble and the
subcommand argument. By default, it is the empty list.
-prefixes
This option (which is enabled by default) controls whether the ensemble command recognizes
unambiguous prefixes of its subcommands. When turned off, the ensemble command requires exact
matching of subcommand names.
-subcommands
When non-empty, this option lists exactly what subcommands are in the ensemble. The mapping for
each of those commands will be either whatever is defined in the -map option, or to the command
with the same name in the namespace linked to the ensemble. If this option is empty, the
subcommands of the namespace will either be the keys of the dictionary listed in the -map option
or the exported commands of the linked namespace at the time of the invocation of the ensemble
command.
-unknown
When non-empty, this option provides a partial command (to which all the words that are arguments
to the ensemble command, including the fully-qualified name of the ensemble, are appended) to
handle the case where an ensemble subcommand is not recognized and would otherwise generate an
error. When empty (the default) an error (in the style of Tcl_GetIndexFromObj) is generated
whenever the ensemble is unable to determine how to implement a particular subcommand. See
UNKNOWN HANDLER BEHAVIOUR for more details.
The following extra option is allowed by namespace ensemble create:
-command
This write-only option allows the name of the ensemble created by namespace ensemble create to be
anything in any existing namespace. The default value for this option is the fully-qualified name
of the namespace in which the namespace ensemble create command is invoked.
The following extra option is allowed by namespace ensemble configure:
-namespace
This read-only option allows the retrieval of the fully-qualified name of the namespace which the
ensemble was created within.
UNKNOWN HANDLER BEHAVIOUR
If an unknown handler is specified for an ensemble, that handler is called when the ensemble command
would otherwise return an error due to it being unable to decide which subcommand to invoke. The exact
conditions under which that occurs are controlled by the -subcommands, -map and -prefixes options as
described above.
To execute the unknown handler, the ensemble mechanism takes the specified -unknown option and appends
each argument of the attempted ensemble command invocation (including the ensemble command itself,
expressed as a fully qualified name). It invokes the resulting command in the scope of the attempted
call. If the execution of the unknown handler terminates normally, the ensemble engine reparses the
subcommand (as described below) and tries to dispatch it again, which is ideal for when the ensemble's
configuration has been updated by the unknown subcommand handler. Any other kind of termination of the
unknown handler is treated as an error.
The result of the unknown handler is expected to be a list (it is an error if it is not). If the list is
an empty list, the ensemble command attempts to look up the original subcommand again and, if it is not
found this time, an error will be generated just as if the -unknown handler was not there (i.e. for any
particular invocation of an ensemble, its unknown handler will be called at most once.) This makes it
easy for the unknown handler to update the ensemble or its backing namespace so as to provide an
implementation of the desired subcommand and reparse.
When the result is a non-empty list, the words of that list are used to replace the ensemble command and
subcommand, just as if they had been looked up in the -map. It is up to the unknown handler to supply all
namespace qualifiers if the implementing subcommand is not in the namespace of the caller of the ensemble
command. Also note that when ensemble commands are chained (e.g. if you make one of the commands that
implement an ensemble subcommand into an ensemble, in a manner similar to the text widget's tag and mark
subcommands) then the rewrite happens in the context of the caller of the outermost ensemble. That is to
say that ensembles do not in themselves place any namespace contexts on the Tcl call stack.
Where an empty -unknown handler is given (the default), the ensemble command will generate an error
message based on the list of commands that the ensemble has defined (formatted similarly to the error
message from Tcl_GetIndexFromObj). This is the error that will be thrown when the subcommand is still not
recognized during reparsing. It is also an error for an -unknown handler to delete its namespace.
EXAMPLES
Create a namespace containing a variable and an exported command:
namespace eval foo {
variable bar 0
proc grill {} {
variable bar
puts "called [incr bar] times"
}
namespace export grill
}
Call the command defined in the previous example in various ways.
# Direct call
::foo::grill
# Use the command resolution path to find the name
namespace eval boo {
namespace path ::foo
grill
}
# Import into current namespace, then call local alias
namespace import foo::grill
grill
# Create two ensembles, one with the default name and one with a
# specified name. Then call through the ensembles.
namespace eval foo {
namespace ensemble create
namespace ensemble create -command ::foobar
}
foo grill
foobar grill
Look up where the command imported in the previous example came from:
puts "grill came from [namespace origin grill]"
Remove all imported commands from the current namespace:
namespace forget {*}[namespace import]
Create an ensemble for simple working with numbers, using the -parameters option to allow the operator to
be put between the first and second arguments.
namespace eval do {
namespace export *
namespace ensemble create -parameters x
proc plus {x y} {expr { $x + $y }}
proc minus {x y} {expr { $x - $y }}
}
# In use, the ensemble works like this:
puts [do 1 plus [do 9 minus 7]]
SEE ALSO
interp(3tcl), upvar(3tcl), variable(3tcl)
KEYWORDS
command, ensemble, exported, internal, variable