Provided by: libpcre2-dev_10.45-1_amd64 
NAME
PCRE2 - Perl-compatible regular expressions (revised API)
PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY
The full syntax and semantics of the regular expression patterns that are supported by PCRE2 are
described in the pcre2pattern documentation. This document contains a quick-reference summary of the
pattern syntax followed by the syntax of replacement strings in substitution function. The full
description of the latter is in the pcre2api documentation.
QUOTING
\x where x is non-alphanumeric is a literal x
\Q...\E treat enclosed characters as literal
Note that white space inside \Q...\E is always treated as literal, even if PCRE2_EXTENDED is set, causing
most other white space to be ignored. Note also that PCRE2's handling of \Q...\E has some differences
from Perl's. See the pcre2pattern documentation for details.
BRACED ITEMS
With one exception, wherever brace characters { and } are required to enclose data for constructions such
as \g{2} or \k{name}, space and/or horizontal tab characters that follow { or precede } are allowed and
are ignored. In the case of quantifiers, they may also appear before or after the comma. The exception is
\u{...} which is not Perl-compatible and is recognized only when PCRE2_EXTRA_ALT_BSUX is set. This is an
ECMAScript compatibility feature, and follows ECMAScript's behaviour.
ESCAPED CHARACTERS
This table applies to ASCII and Unicode environments. An unrecognized escape sequence causes an error.
\a alarm, that is, the BEL character (hex 07)
\cx "control-x", where x is a non-control ASCII character
\e escape (hex 1B)
\f form feed (hex 0C)
\n newline (hex 0A)
\r carriage return (hex 0D)
\t tab (hex 09)
\0dd character with octal code 0dd
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
\xhh character with hex code hh
\x{hh..} character with hex code hh..
\N{U+hh..} is synonymous with \x{hh..} but is not supported in environments that use EBCDIC code (mainly
IBM mainframes). Note that \N not followed by an opening curly bracket has a different meaning (see
below).
If PCRE2_ALT_BSUX or PCRE2_EXTRA_ALT_BSUX is set ("ALT_BSUX mode"), the following are also recognized:
\U the character "U"
\uhhhh character with hex code hhhh
\u{hh..} character with hex code hh.. but only for EXTRA_ALT_BSUX
When \x is not followed by {, one or two hexadecimal digits are read, but in ALT_BSUX mode \x must be
followed by two hexadecimal digits to be recognized as a hexadecimal escape; otherwise it matches a
literal "x". Likewise, if \u (in ALT_BSUX mode) is not followed by four hexadecimal digits or (in
EXTRA_ALT_BSUX mode) a sequence of hex digits in curly brackets, it matches a literal "u".
Note that \0dd is always an octal code. The treatment of backslash followed by a non-zero digit is
complicated; for details see the section "Non-printing characters" in the pcre2pattern documentation,
where details of escape processing in EBCDIC environments are also given.
CHARACTER TYPES
. any character except newline;
in dotall mode, any character whatsoever
\C one code unit, even in UTF mode (best avoided)
\d a decimal digit
\D a character that is not a decimal digit
\h a horizontal white space character
\H a character that is not a horizontal white space character
\N a character that is not a newline
\p{xx} a character with the xx property
\P{xx} a character without the xx property
\R a newline sequence
\s a white space character
\S a character that is not a white space character
\v a vertical white space character
\V a character that is not a vertical white space character
\w a "word" character
\W a "non-word" character
\X a Unicode extended grapheme cluster
\C is dangerous because it may leave the current matching point in the middle of a UTF-8 or UTF-16
character. The application can lock out the use of \C by setting the PCRE2_NEVER_BACKSLASH_C option. It
is also possible to build PCRE2 with the use of \C permanently disabled.
By default, \d, \s, and \w match only ASCII characters, even in UTF-8 mode or in the 16-bit and 32-bit
libraries. However, if locale-specific matching is happening, \s and \w may also match characters with
code points in the range 128-255. If the PCRE2_UCP option is set, the behaviour of these escape sequences
is changed to use Unicode properties and they match many more characters, but there are some option
settings that can restrict individual sequences to matching only ASCII characters.
Property descriptions in \p and \P are matched caselessly; hyphens, underscores, and ASCII white space
characters are ignored, in accordance with Unicode's "loose matching" rules. For example,
\p{Bidi_Class=al} is the same as \p{ bidi class = AL }.
GENERAL CATEGORY PROPERTIES FOR \p and \P
C Other
Cc Control
Cf Format
Cn Unassigned
Co Private use
Cs Surrogate
L Letter
Lc Cased letter, the union of Ll, Lu, and Lt
L& Synonym of Lc
Ll Lower case letter
Lm Modifier letter
Lo Other letter
Lt Title case letter
Lu Upper case letter
M Mark
Mc Spacing mark
Me Enclosing mark
Mn Non-spacing mark
N Number
Nd Decimal number
Nl Letter number
No Other number
P Punctuation
Pc Connector punctuation
Pd Dash punctuation
Pe Close punctuation
Pf Final punctuation
Pi Initial punctuation
Po Other punctuation
Ps Open punctuation
S Symbol
Sc Currency symbol
Sk Modifier symbol
Sm Mathematical symbol
So Other symbol
Z Separator
Zl Line separator
Zp Paragraph separator
Zs Space separator
From release 10.45, when caseless matching is set, Ll, Lu, and Lt are all equivalent to Lc.
PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P
Xan Alphanumeric: union of properties L and N
Xps POSIX space: property Z or tab, NL, VT, FF, CR
Xsp Perl space: property Z or tab, NL, VT, FF, CR
Xuc Universally-named character: one that can be
represented by a Universal Character Name
Xwd Perl word: property Xan or underscore
Perl and POSIX space are now the same. Perl added VT to its space character set at release 5.18.
BINARY PROPERTIES FOR \p AND \P
Unicode defines a number of binary properties, that is, properties whose only values are true or false.
You can obtain a list of those that are recognized by \p and \P, along with their abbreviations, by
running this command:
pcre2test -LP
SCRIPT MATCHING WITH \p AND \P
Many script names and their 4-letter abbreviations are recognized in \p{sc:...} or \p{scx:...} items, or
on their own with \p (and also \P of course). You can obtain a list of these scripts by running this
command:
pcre2test -LS
THE BIDI_CLASS PROPERTY FOR \p AND \P
\p{Bidi_Class:<class>} matches a character with the given class
\p{BC:<class>} matches a character with the given class
The recognized classes are:
AL Arabic letter
AN Arabic number
B paragraph separator
BN boundary neutral
CS common separator
EN European number
ES European separator
ET European terminator
FSI first strong isolate
L left-to-right
LRE left-to-right embedding
LRI left-to-right isolate
LRO left-to-right override
NSM non-spacing mark
ON other neutral
PDF pop directional format
PDI pop directional isolate
R right-to-left
RLE right-to-left embedding
RLI right-to-left isolate
RLO right-to-left override
S segment separator
WS white space
CHARACTER CLASSES
[...] positive character class
[^...] negative character class
[x-y] range (can be used for hex characters)
[[:xxx:]] positive POSIX named set
[[:^xxx:]] negative POSIX named set
alnum alphanumeric
alpha alphabetic
ascii 0-127
blank space or tab
cntrl control character
digit decimal digit
graph printing, excluding space
lower lower case letter
print printing, including space
punct printing, excluding alphanumeric
space white space
upper upper case letter
word same as \w
xdigit hexadecimal digit
In PCRE2, POSIX character set names recognize only ASCII characters by default, but some of them use
Unicode properties if PCRE2_UCP is set. You can use \Q...\E inside a character class.
When PCRE2_ALT_EXTENDED_CLASS is set, UTS#18 extended character classes may be used, allowing nested
character classes, combined using set operators.
[x&&[^y]] UTS#18 extended character class
x||y set union (OR)
x&&y set intersection (AND)
x--y set difference (AND NOT)
x~~y set symmetric difference (XOR)
PERL EXTENDED CHARACTER CLASSES
(?[...]) Perl extended character class
(?[\p{Thai} & \p{Nd}]) operators; whitespace ignored
(?[(x - y) & z]) parentheses for grouping
(?[ [^3] & \p{Nd} ]) [...] is a nested ordinary class
(?[ [:alpha:] - [z] ]) POSIX set is allowed outside [...]
(?[ \d - [3] ]) backslash-escaped set is allowed outside [...]
(?[ !\n & [:ascii:] ]) backslash-escaped character is allowed outside [...]
all other characters or ranges must be enclosed in [...]
x|y, x+y set union (OR)
x&y set intersection (AND)
x-y set difference (AND NOT)
x^y set symmetric difference (XOR)
!x set complement (NOT)
Inside a Perl extended character class, [...] switches mode to be interpreted as an ordinary character
class. Outside of a nested [...], the only items permitted are backslash-escapes, POSIX sets, operators,
and parentheses. Inside a nested ordinary class, ^ has its usual meaning (inverts the class when used as
the first character); outside of a nested class, ^ is the XOR operator.
QUANTIFIERS
? 0 or 1, greedy
?+ 0 or 1, possessive
?? 0 or 1, lazy
* 0 or more, greedy
*+ 0 or more, possessive
*? 0 or more, lazy
+ 1 or more, greedy
++ 1 or more, possessive
+? 1 or more, lazy
{n} exactly n
{n,m} at least n, no more than m, greedy
{n,m}+ at least n, no more than m, possessive
{n,m}? at least n, no more than m, lazy
{n,} n or more, greedy
{n,}+ n or more, possessive
{n,}? n or more, lazy
{,m} zero up to m, greedy
{,m}+ zero up to m, possessive
{,m}? zero up to m, lazy
ANCHORS AND SIMPLE ASSERTIONS
\b word boundary
\B not a word boundary
^ start of subject
also after an internal newline in multiline mode
(after any newline if PCRE2_ALT_CIRCUMFLEX is set)
\A start of subject
$ end of subject
also before newline at end of subject
also before internal newline in multiline mode
\Z end of subject
also before newline at end of subject
\z end of subject
\G first matching position in subject
REPORTED MATCH POINT SETTING
\K set reported start of match
From release 10.38 \K is not permitted by default in lookaround assertions, for compatibility with Perl.
However, if the PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK option is set, the previous behaviour is re-enabled.
When this option is set, \K is honoured in positive assertions, but ignored in negative ones.
ALTERNATION
expr|expr|expr...
CAPTURING
(...) capture group
(?<name>...) named capture group (Perl)
(?'name'...) named capture group (Perl)
(?P<name>...) named capture group (Python)
(?:...) non-capture group
(?|...) non-capture group; reset group numbers for
capture groups in each alternative
In non-UTF modes, names may contain underscores and ASCII letters and digits; in UTF modes, any Unicode
letters and Unicode decimal digits are permitted. In both cases, a name must not start with a digit.
ATOMIC GROUPS
(?>...) atomic non-capture group
(*atomic:...) atomic non-capture group
COMMENT
(?#....) comment (not nestable)
OPTION SETTING
Changes of these options within a group are automatically cancelled at the end of the group.
(?a) all ASCII options
(?aD) restrict \d to ASCII in UCP mode
(?aS) restrict \s to ASCII in UCP mode
(?aW) restrict \w to ASCII in UCP mode
(?aP) restrict all POSIX classes to ASCII in UCP mode
(?aT) restrict POSIX digit classes to ASCII in UCP mode
(?i) caseless
(?J) allow duplicate named groups
(?m) multiline
(?n) no auto capture
(?r) restrict caseless to either ASCII or non-ASCII
(?s) single line (dotall)
(?U) default ungreedy (lazy)
(?x) ignore white space except in classes or \Q...\E
(?xx) as (?x) but also ignore space and tab in classes
(?-...) unset the given option(s)
(?^) unset imnrsx options
(?aP) implies (?aT) as well, though this has no additional effect. However, it means that (?-aP) also
implies (?-aT) and disables all ASCII restrictions for POSIX classes.
Unsetting x or xx unsets both. Several options may be set at once, and a mixture of setting and unsetting
such as (?i-x) is allowed, but there may be only one hyphen. Setting (but no unsetting) is allowed after
(?^ for example (?^in). An option setting may appear at the start of a non-capture group, for example
(?i:...).
The following are recognized only at the very start of a pattern or after one of the newline or \R
sequences or options with similar syntax. More than one of them may appear. For the first three, d is a
decimal number.
(*LIMIT_DEPTH=d) set the backtracking limit to d
(*LIMIT_HEAP=d) set the heap size limit to d * 1024 bytes
(*LIMIT_MATCH=d) set the match limit to d
(*CASELESS_RESTRICT) set PCRE2_EXTRA_CASELESS_RESTRICT when matching
(*NOTEMPTY) set PCRE2_NOTEMPTY when matching
(*NOTEMPTY_ATSTART) set PCRE2_NOTEMPTY_ATSTART when matching
(*NO_AUTO_POSSESS) no auto-possessification (PCRE2_NO_AUTO_POSSESS)
(*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR)
(*NO_JIT) disable JIT optimization
(*NO_START_OPT) no start-match optimization (PCRE2_NO_START_OPTIMIZE)
(*TURKISH_CASING) set PCRE2_EXTRA_TURKISH_CASING when matching
(*UTF) set appropriate UTF mode for the library in use
(*UCP) set PCRE2_UCP (use Unicode properties for \d etc)
Note that LIMIT_DEPTH, LIMIT_HEAP, and LIMIT_MATCH can only reduce the value of the limits set by the
caller of pcre2_match() or pcre2_dfa_match(), not increase them. LIMIT_RECURSION is an obsolete synonym
for LIMIT_DEPTH. The application can lock out the use of (*UTF) and (*UCP) by setting the PCRE2_NEVER_UTF
or PCRE2_NEVER_UCP options, respectively, at compile time.
NEWLINE CONVENTION
These are recognized only at the very start of the pattern or after option settings with a similar
syntax.
(*CR) carriage return only
(*LF) linefeed only
(*CRLF) carriage return followed by linefeed
(*ANYCRLF) all three of the above
(*ANY) any Unicode newline sequence
(*NUL) the NUL character (binary zero)
WHAT \R MATCHES
These are recognized only at the very start of the pattern or after option setting with a similar syntax.
(*BSR_ANYCRLF) CR, LF, or CRLF
(*BSR_UNICODE) any Unicode newline sequence
LOOKAHEAD AND LOOKBEHIND ASSERTIONS
(?=...) )
(*pla:...) ) positive lookahead
(*positive_lookahead:...) )
(?!...) )
(*nla:...) ) negative lookahead
(*negative_lookahead:...) )
(?<=...) )
(*plb:...) ) positive lookbehind
(*positive_lookbehind:...) )
(?<!...) )
(*nlb:...) ) negative lookbehind
(*negative_lookbehind:...) )
Each top-level branch of a lookbehind must have a limit for the number of characters it matches. If any
branch can match a variable number of characters, the maximum for each branch is limited to a value set
by the caller of pcre2_compile() or defaulted. The default is set when PCRE2 is built (ultimate default
255). If every branch matches a fixed number of characters, the limit for each branch is 65535
characters.
NON-ATOMIC LOOKAROUND ASSERTIONS
These assertions are specific to PCRE2 and are not Perl-compatible.
(?*...) )
(*napla:...) ) synonyms
(*non_atomic_positive_lookahead:...) )
(?<*...) )
(*naplb:...) ) synonyms
(*non_atomic_positive_lookbehind:...) )
SUBSTRING SCAN ASSERTION
This feature is not Perl-compatible.
(*scan_substring:(grouplist)...) scan captured substring
(*scs:(grouplist)...) scan captured substring
The comma-separated list may identify groups in any of the following ways:
n absolute reference
+n relative reference
-n relative reference
<name> name
'name' name
SCRIPT RUNS
(*script_run:...) ) script run, can be backtracked into
(*sr:...) )
(*atomic_script_run:...) ) atomic script run
(*asr:...) )
BACKREFERENCES
\n reference by number (can be ambiguous)
\gn reference by number
\g{n} reference by number
\g+n relative reference by number (PCRE2 extension)
\g-n relative reference by number
\g{+n} relative reference by number (PCRE2 extension)
\g{-n} relative reference by number
\k<name> reference by name (Perl)
\k'name' reference by name (Perl)
\g{name} reference by name (Perl)
\k{name} reference by name (.NET)
(?P=name) reference by name (Python)
SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)
(?R) recurse whole pattern
(?n) call subroutine by absolute number
(?+n) call subroutine by relative number
(?-n) call subroutine by relative number
(?&name) call subroutine by name (Perl)
(?P>name) call subroutine by name (Python)
\g<name> call subroutine by name (Oniguruma)
\g'name' call subroutine by name (Oniguruma)
\g<n> call subroutine by absolute number (Oniguruma)
\g'n' call subroutine by absolute number (Oniguruma)
\g<+n> call subroutine by relative number (PCRE2 extension)
\g'+n' call subroutine by relative number (PCRE2 extension)
\g<-n> call subroutine by relative number (PCRE2 extension)
\g'-n' call subroutine by relative number (PCRE2 extension)
CONDITIONAL PATTERNS
(?(condition)yes-pattern)
(?(condition)yes-pattern|no-pattern)
(?(n) absolute reference condition
(?(+n) relative reference condition (PCRE2 extension)
(?(-n) relative reference condition (PCRE2 extension)
(?(<name>) named reference condition (Perl)
(?('name') named reference condition (Perl)
(?(name) named reference condition (PCRE2, deprecated)
(?(R) overall recursion condition
(?(Rn) specific numbered group recursion condition
(?(R&name) specific named group recursion condition
(?(DEFINE) define groups for reference
(?(VERSION[>]=n.m) test PCRE2 version
(?(assert) assertion condition
Note the ambiguity of (?(R) and (?(Rn) which might be named reference conditions or recursion tests. Such
a condition is interpreted as a reference condition if the relevant named group exists.
BACKTRACKING CONTROL
All backtracking control verbs may be in the form (*VERB:NAME). For (*MARK) the name is mandatory, for
the others it is optional. (*SKIP) changes its behaviour if :NAME is present. The others just set a name
for passing back to the caller, but this is not a name that (*SKIP) can see. The following act
immediately they are reached:
(*ACCEPT) force successful match
(*FAIL) force backtrack; synonym (*F)
(*MARK:NAME) set name to be passed back; synonym (*:NAME)
The following act only when a subsequent match failure causes a backtrack to reach them. They all force a
match failure, but they differ in what happens afterwards. Those that advance the start-of-match point do
so only if the pattern is not anchored.
(*COMMIT) overall failure, no advance of starting point
(*PRUNE) advance to next starting character
(*SKIP) advance to current matching position
(*SKIP:NAME) advance to position corresponding to an earlier
(*MARK:NAME); if not found, the (*SKIP) is ignored
(*THEN) local failure, backtrack to next alternation
The effect of one of these verbs in a group called as a subroutine is confined to the subroutine call.
CALLOUTS
(?C) callout (assumed number 0)
(?Cn) callout with numerical data n
(?C"text") callout with string data
The allowed string delimiters are ` ' " ^ % # $ (which are the same for the start and the end), and the
starting delimiter { matched with the ending delimiter }. To encode the ending delimiter within the
string, double it.
REPLACEMENT STRINGS
If the PCRE2_SUBSTITUTE_LITERAL option is set, a replacement string for pcre2_substitute() is not
interpreted. Otherwise, by default, the only special character is the dollar character in one of the
following forms:
$$ insert a dollar character
$n or ${n} insert the contents of group n
$<name> insert the contents of named group
$0 or $& insert the entire matched substring
$` insert the substring that precedes the match
$' insert the substring that follows the match
$_ insert the entire input string
$*MARK or ${*MARK} insert a control verb name
For ${n}, n can be a name or a number. If PCRE2_SUBSTITUTE_EXTENDED is set, there is additional
interpretation:
1. Backslash is an escape character, and the forms described in "ESCAPED CHARACTERS" above are
recognized. Also:
\Q...\E can be used to suppress interpretation
\l force the next character to lower case
\u force the next character to upper case
\L force subsequent characters to lower case
\U force subsequent characters to upper case
\u\L force next character to upper case, then all lower
\l\U force next character to lower case, then all upper
\E end \L or \U case forcing
\b backspace character (note: as in character class in pattern)
\v vertical tab character (note: not the same as in a pattern)
2. The Python form \g<n>, where the angle brackets are part of the syntax and n is either a group name or
a number, is recognized as an alternative way of inserting the contents of a group, for example \g<3>.
3. Capture substitution supports the following additional forms:
${n:-string} default for unset group
${n:+string1:string2} values for set/unset group
The substitution strings themselves are expanded. Backslash can be used to escape colons and closing
curly brackets.
SEE ALSO
pcre2pattern(3), pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2(3).
AUTHOR
Philip Hazel
Retired from University Computing Service
Cambridge, England.
REVISION
Last updated: 27 November 2024
Copyright (c) 1997-2024 University of Cambridge.