Ubuntu Manpage: charsets - character set standards and internationalization

NAME

       charsets - character set standards and internationalization

DESCRIPTION

This manual page gives an overview on different character set standards and how they were used on Linux
before Unicode became ubiquitous. Some of this information is still helpful for people working with
legacy systems and documents.

Standards discussed include such as ASCII, GB 2312, ISO/IEC 8859, JIS, KOI8-R, KS, and Unicode.

The primary emphasis is on character sets that were actually used by locale character sets, not the
myriad others that could be found in data from other systems.

ASCII
ASCII (American Standard Code For Information Interchange) is the original 7-bit character set,
originally designed for American English. Also known as US-ASCII. It is currently described by the
ISO/IEC 646:1991 IRV (International Reference Version) standard.

Various ASCII variants replacing the dollar sign with other currency symbols and replacing punctuation
with non-English alphabetic characters to cover German, French, Spanish, and others in 7 bits emerged.
All are deprecated; glibc does not support locales whose character sets are not true supersets of ASCII.

As Unicode, when using UTF-8, is ASCII-compatible, plain ASCII text still renders properly on modern
UTF-8 using systems.

ISO/IEC 8859
ISO/IEC 8859 is a series of 15 8-bit character sets, all of which have ASCII in their low (7-bit) half,
invisible control characters in positions 128 to 159, and 96 fixed-width graphics in positions 160–255.

Of these, the most important is ISO/IEC 8859-1 ("Latin Alphabet No. 1" / Latin-1). It was widely adopted
and supported by different systems, and is gradually being replaced with Unicode. The ISO/IEC 8859-1
characters are also the first 256 characters of Unicode.

Console support for the other ISO/IEC 8859 character sets is available under Linux through user-mode
utilities (such as setfont(8)) that modify keyboard bindings and the EGA graphics table and employ the
"user mapping" font table in the console driver.

Here are brief descriptions of each character set:

ISO/IEC 8859-1 (Latin-1)
Latin-1 covers many European languages such as Albanian, Basque, Danish, English, Faroese,
Galician, Icelandic, Irish, Italian, Norwegian, Portuguese, Spanish, and Swedish. The lack of the
ligatures Dutch Ĳ/ĳ, French œ, and „German“ quotation marks was considered tolerable.

ISO/IEC 8859-2 (Latin-2)
Latin-2 supports many Latin-written Central and East European languages such as Bosnian, Croatian,
Czech, German, Hungarian, Polish, Slovak, and Slovene. Replacing Romanian ș/ț with ş/ţ was
considered tolerable.

ISO/IEC 8859-3 (Latin-3)
Latin-3 was designed to cover of Esperanto, Maltese, and Turkish, but ISO/IEC 8859-9 later
superseded it for Turkish.

ISO/IEC 8859-4 (Latin-4)
Latin-4 introduced letters for North European languages such as Estonian, Latvian, and Lithuanian,
but was superseded by ISO/IEC 8859-10 and ISO/IEC 8859-13.

ISO/IEC 8859-5
Cyrillic letters supporting Bulgarian, Byelorussian, Macedonian, Russian, Serbian, and (almost
completely) Ukrainian. It was never widely used, see the discussion of KOI8-R/KOI8-U below.

ISO/IEC 8859-6
Was created for Arabic. The ISO/IEC 8859-6 glyph table is a fixed font of separate letter forms,
but a proper display engine should combine these using the proper initial, medial, and final
forms.

ISO/IEC 8859-7
Was created for Modern Greek in 1987, updated in 2003.

ISO/IEC 8859-8
Supports Modern Hebrew without niqud (punctuation signs). Niqud and full-fledged Biblical Hebrew
were outside the scope of this character set.

ISO/IEC 8859-9 (Latin-5)
This is a variant of Latin-1 that replaces Icelandic letters with Turkish ones.

ISO/IEC 8859-10 (Latin-6)
Latin-6 added the Inuit (Greenlandic) and Sami (Lappish) letters that were missing in Latin-4 to
cover the entire Nordic area.

ISO/IEC 8859-11
Supports the Thai alphabet and is nearly identical to the TIS-620 standard.

ISO/IEC 8859-12
This character set does not exist.

ISO/IEC 8859-13 (Latin-7)
Supports the Baltic Rim languages; in particular, it includes Latvian characters not found in
Latin-4.

ISO/IEC 8859-14 (Latin-8)
This is the Celtic character set, covering Old Irish, Manx, Gaelic, Welsh, Cornish, and Breton.

ISO/IEC 8859-15 (Latin-9)
Latin-9 is similar to the widely used Latin-1 but replaces some less common symbols with the Euro
sign and French and Finnish letters that were missing in Latin-1.

ISO/IEC 8859-16 (Latin-10)
This character set covers many Southeast European languages, and most importantly supports
Romanian more completely than Latin-2.

KOI8-R / KOI8-U
KOI8-R is a non-ISO character set popular in Russia before Unicode. The lower half is ASCII; the upper
is a Cyrillic character set somewhat better designed than ISO/IEC 8859-5. KOI8-U, based on KOI8-R, has
better support for Ukrainian. Neither of these sets are ISO/IEC 2022 compatible, unlike the ISO/IEC 8859
series.

Console support for KOI8-R is available under Linux through user-mode utilities that modify keyboard
bindings and the EGA graphics table, and employ the "user mapping" font table in the console driver.

GB 2312
GB 2312 is a mainland Chinese national standard character set used to express simplified Chinese. Just
like JIS X 0208, characters are mapped into a 94x94 two-byte matrix used to construct EUC-CN. EUC-CN is
the most important encoding for Linux and includes ASCII and GB 2312. Note that EUC-CN is often called
as GB, GB 2312, or CN-GB.

Big5
Big5 was a popular character set in Taiwan to express traditional Chinese. (Big5 is both a character set
and an encoding.) It is a superset of ASCII. Non-ASCII characters are expressed in two bytes. Bytes
0xa1–0xfe are used as leading bytes for two-byte characters. Big5 and its extension were widely used in
Taiwan and Hong Kong. It is not ISO/IEC 2022 compliant.

JIS X 0208
JIS X 0208 is a Japanese national standard character set. Though there are some more Japanese national
standard character sets (like JIS X 0201, JIS X 0212, and JIS X 0213), this is the most important one.
Characters are mapped into a 94x94 two-byte matrix, whose each byte is in the range 0x21–0x7e. Note that
JIS X 0208 is a character set, not an encoding. This means that JIS X 0208 itself is not used for
expressing text data. JIS X 0208 is used as a component to construct encodings such as EUC-JP,
Shift_JIS, and ISO/IEC 2022-JP. EUC-JP is the most important encoding for Linux and includes ASCII and
JIS X 0208. In EUC-JP, JIS X 0208 characters are expressed in two bytes, each of which is the JIS X 0208
code plus 0x80.

KS X 1001
KS X 1001 is a Korean national standard character set. Just as JIS X 0208, characters are mapped into a
94x94 two-byte matrix. KS X 1001 is used like JIS X 0208, as a component to construct encodings such as
EUC-KR, Johab, and ISO/IEC 2022-KR. EUC-KR is the most important encoding for Linux and includes ASCII
and KS X 1001. KS C 5601 is an older name for KS X 1001.

ISO/IEC 2022 and ISO/IEC 4873
The ISO/IEC 2022 and ISO/IEC 4873 standards describe a font-control model based on VT100 practice. This
model is (partially) supported by the Linux kernel and by xterm(1). Several ISO/IEC 2022-based character
encodings have been defined, especially for Japanese.

There are 4 graphic character sets, called G0, G1, G2, and G3, and one of them is the current character
set for codes with high bit zero (initially G0), and one of them is the current character set for codes
with high bit one (initially G1). Each graphic character set has 94 or 96 characters, and is essentially
a 7-bit character set. It uses codes either 040–0177 (041–0176) or 0240–0377 (0241–0376). G0 always has
size 94 and uses codes 041–0176.

Switching between character sets is done using the shift functions ^N (SO or LS1), ^O (SI or LS0), ESC n
(LS2), ESC o (LS3), ESC N (SS2), ESC O (SS3), ESC ~ (LS1R), ESC } (LS2R), ESC | (LS3R). The function LSn
makes character set Gn the current one for codes with high bit zero. The function LSnR makes character
set Gn the current one for codes with high bit one. The function SSn makes character set Gn (n=2 or 3)
the current one for the next character only (regardless of the value of its high order bit).

A 94-character set is designated as Gn character set by an escape sequence ESC ( xx (for G0), ESC ) xx
(for G1), ESC * xx (for G2), ESC + xx (for G3), where xx is a symbol or a pair of symbols found in the
ISO/IEC 2375 International Register of Coded Character Sets. For example, ESC ( @ selects the
ISO/IEC 646 character set as G0, ESC ( A selects the UK standard character set (with pound instead of
number sign), ESC ( B selects ASCII (with dollar instead of currency sign), ESC ( M selects a character
set for African languages, ESC ( ! A selects the Cuban character set, and so on.

A 96-character set is designated as Gn character set by an escape sequence ESC - xx (for G1), ESC . xx
(for G2) or ESC / xx (for G3). For example, ESC - G selects the Hebrew alphabet as G1.

A multibyte character set is designated as Gn character set by an escape sequence ESC $ xx or ESC $ ( xx
(for G0), ESC $ ) xx (for G1), ESC $ * xx (for G2), ESC $ + xx (for G3). For example, ESC $ ( C selects
the Korean character set for G0. The Japanese character set selected by ESC $ B has a more recent
version selected by ESC & @ ESC $ B.

ISO/IEC 4873 stipulates a narrower use of character sets, where G0 is fixed (always ASCII), so that G1,
G2, and G3 can be invoked only for codes with the high order bit set. In particular, ^N and ^O are not
used anymore, ESC ( xx can be used only with xx=B, and ESC ) xx, ESC * xx, ESC + xx are equivalent to ESC
- xx, ESC . xx, ESC / xx, respectively.

TIS-620
TIS-620 is a Thai national standard character set and a superset of ASCII. In the same fashion as the
ISO/IEC 8859 series, Thai characters are mapped into 0xa1–0xfe.

Unicode
Unicode (ISO/IEC 10646) is a standard which aims to unambiguously represent every character in every
human language. Unicode's structure permits 20.1 bits to encode every character. Since most computers
don't include 20.1-bit integers, Unicode is usually encoded as 32-bit integers internally and either a
series of 16-bit integers (UTF-16) (needing two 16-bit integers only when encoding certain rare
characters) or a series of 8-bit bytes (UTF-8).

Linux represents Unicode using the 8-bit Unicode Transformation Format (UTF-8). UTF-8 is a variable
length encoding of Unicode. It uses 1 byte to code 7 bits, 2 bytes for 11 bits, 3 bytes for 16 bits, 4
bytes for 21 bits, 5 bytes for 26 bits, 6 bytes for 31 bits.

Let 0,1,x stand for a zero, one, or arbitrary bit. A byte 0xxxxxxx stands for the Unicode 00000000
0xxxxxxx which codes the same symbol as the ASCII 0xxxxxxx. Thus, ASCII goes unchanged into UTF-8, and
people using only ASCII do not notice any change: not in code, and not in file size.

A byte 110xxxxx is the start of a 2-byte code, and 110xxxxx 10yyyyyy is assembled into 00000xxx xxyyyyyy.
A byte 1110xxxx is the start of a 3-byte code, and 1110xxxx 10yyyyyy 10zzzzzz is assembled into xxxxyyyy
yyzzzzzz. (When UTF-8 is used to code the 31-bit ISO/IEC 10646 then this progression continues up to
6-byte codes.)

For most texts in ISO/IEC 8859 character sets, this means that the characters outside of ASCII are now
coded with two bytes. This tends to expand ordinary text files by only one or two percent. For Russian
or Greek texts, this expands ordinary text files by 100%, since text in those languages is mostly outside
of ASCII. For Japanese users this means that the 16-bit codes now in common use will take three bytes.
While there are algorithmic conversions from some character sets (especially ISO/IEC 8859-1) to Unicode,
general conversion requires carrying around conversion tables, which can be quite large for 16-bit codes.

Note that UTF-8 is self-synchronizing: 10xxxxxx is a tail, any other byte is the head of a code. Note
that the only way ASCII bytes occur in a UTF-8 stream, is as themselves. In particular, there are no
embedded NULs ('\0') or '/'s that form part of some larger code.

Since ASCII, and, in particular, NUL and '/', are unchanged, the kernel does not notice that UTF-8 is
being used. It does not care at all what the bytes it is handling stand for.

Rendering of Unicode data streams is typically handled through "subfont" tables which map a subset of
Unicode to glyphs. Internally the kernel uses Unicode to describe the subfont loaded in video RAM. This
means that in the Linux console in UTF-8 mode, one can use a character set with 512 different symbols.
This is not enough for Japanese, Chinese, and Korean, but it is enough for most other purposes.

NAME

DESCRIPTION

SEE ALSO