plucky (8) vgreduce.8.gz

NAME

       vgreduce — Remove physical volume(s) from a volume group

SYNOPSIS

       vgreduce option_args position_args
           [ option_args ]

        -a|--all
        -A|--autobackup y|n
           --commandprofile String
           --config String
        -d|--debug
           --devices PV
           --devicesfile String
           --driverloaded y|n
        -f|--force
        -h|--help
           --journal String
           --lockopt String
           --longhelp
           --mirrorsonly
           --nohints
           --nolocking
           --profile String
        -q|--quiet
           --removemissing
           --reportformat basic|json|json_std
        -t|--test
        -v|--verbose
           --version
        -y|--yes

DESCRIPTION

       vgreduce removes one or more unused PVs from a VG.

USAGE

       Remove a PV from a VG.

       vgreduce VG PV ...
           [ COMMON_OPTIONS ]

       —

       Remove all unused PVs from a VG.

       vgreduce -a|--all VG
           [ COMMON_OPTIONS ]

       —

       Remove all missing PVs from a VG.

       vgreduce --removemissing VG
           [    --mirrorsonly ]
           [ COMMON_OPTIONS ]

       —

       Common options for command:
           [ -A|--autobackup y|n ]
           [ -f|--force ]
           [    --reportformat basic|json|json_std ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       -a|--all
              Removes all empty PVs if none are named on the command line.

       -A|--autobackup y|n
              Specifies if metadata should be backed up automatically after a change.  Enabling this is strongly
              advised! See vgcfgbackup(8) for more information.

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more information  about
              profiles.

       --config String
              Config  settings  for  the  command. These override lvm.conf(5) settings.  The String arg uses the
              same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5) for more information
              about config.

       -d|--debug ...
              Set  debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
              and/or syslog (if configured).

       --devices PV
              Restricts the devices that are visible and accessible to the command.   Devices  not  listed  will
              appear  to  be missing. This option can be repeated, or accepts a comma separated list of devices.
              This overrides the devices file.

       --devicesfile String
              A file listing devices that LVM should use.  The file  must  exist  in  /etc/lvm/devices/  and  is
              managed  with  the  lvmdevices(8) command.  This overrides the lvm.conf(5) devices/devicesfile and
              devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --journal String
              Record information in the systemd journal.  This information is in addition to information enabled
              by  the  lvm.conf  log/journal  setting.   command: record information about the command.  output:
              record the default command output.  debug: record full command debugging.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more information.

       --longhelp
              Display long help text.

       --mirrorsonly
              Only remove missing PVs from mirror LVs.

       --nohints
              Do not use the hints file to locate devices for PVs. A command may read more devices to  find  PVs
              when  hints  are  not  used.  The command will still perform standard hint file invalidation where
              appropriate.

       --nolocking
              Disable locking. Use with caution, concurrent commands may produce incorrect results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to  also  suppress
              any prompts with answer 'no'.

       --removemissing
              Removes  all  missing  PVs from the VG, if there are no LVs allocated on them. This resumes normal
              operation of the VG (new LVs may again be created, changed and so on).  If this  is  not  possible
              because  LVs are referencing the missing PVs, this option can be combined with --force to have the
              command remove any partial LVs. In this case, any LVs and dependent snapshots that were partly  on
              the  missing  disks are removed completely, including those parts on disks that are still present.
              If LVs spanned several disks, including ones that are lost,  salvaging  some  data  first  may  be
              possible by activating LVs in partial mode.

       --reportformat basic|json|json_std
              Overrides  current output format for reports which is defined globally by the report/output_format
              setting in lvm.conf(5).  basic is the original format with columns and rows.   If  there  is  more
              than one report per command, each report is prefixed with the report name for identification. json
              produces report output in JSON format. json_std produces report output in  JSON  format  which  is
              more compliant with JSON standard.  See lvmreport(7) for more information.

       -t|--test
              Run  in  test  mode.  Commands  will  not  update  metadata.  This is implemented by disabling all
              metadata writing but nevertheless returning success to the calling  function.  This  may  lead  to
              unusual  error  messages  in  multi-stage  operations if a tool relies on reading back metadata it
              believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout  and
              stderr.

       --version
              Display version information.

       -y|--yes
              Do  not  prompt  for confirmation interactively but always assume the answer yes. Use with extreme
              caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       PV     Physical Volume name, a device path under /dev.  For commands  managing  physical  extents,  a  PV
              positional  arg  generally  accepts  a  suffix indicating a range (or multiple ranges) of physical
              extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when  the
              last  PE is omitted it defaults to end.  Start and end range (inclusive): PV[:PE-PE]...  Start and
              length range (counting from 0): PV[:PE+PE]...

       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated as base two
              values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.  The default input unit
              is specified by letter, followed by |UNIT.  UNIT represents other possible  input  units:  b|B  is
              bytes,  s|S  is  sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB,
              e|E is EiB.  (This should not be confused with the output control --units, where  capital  letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by lvm.  For example, LVM_VG_NAME can
       generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
       vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
       lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7), lvmvdo(7), lvmautoactivation(7)