Provided by: airspyhf_1.6.8-4build1_amd64
NAME
airspyhf_rx - probe device and show configuration
DESCRIPTION
The AirspyHF is a tiny and efficient software defined radio receiver. This application lets the user probe the device and show configuration.
SYNOPSIS
airspy_rx
OPTIONS
Usage: -r <filename> Receive data into the file; stdout emits values on standard output -s <serial number> Open device with specified 64bits serial number -f <frequency> Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260 MHz -a <sample_rate> Set sample rate, at the moment only 768 kS/s supported -n <#samples> Number of samples to transfer (default is unlimited) -d Verbose mode -w Receive data into file with WAV header and automatic name This is for SDR# compatibility and may not work with other software It works even with HDSDR -g on|off HF AGC on / off -l high|low HF AGC threshold high / low (when AGC On) -t <value> HF attenuator value 0..8 (each step increases 6 dB the attenuation) -m on|off on to activate LNA (preamplifier): +6 dB gain - compensated in digital. -z Do not attempt to use manual AGC/LNA commands (useful in order to avoid errors with old firmware)
SEE ALSO
AirspyHF web page: https://airspy.com/airspy-hf-plus Other airspyhf programs: airspyhf_rx(1), airspyhf_gpio(1), airspyhf_lib_version(1), airspyhf_rx(1)
AUTHOR
This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).
COPYRIGHT
Copyright (c) 2020 A. Maitland Bottoms <bottoms@debian.org> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.