Provided by: dcmtk_3.6.8-6_amd64 
NAME
dcmcjpls - Encode DICOM file to JPEG-LS transfer syntax
SYNOPSIS
dcmcjpls [options] dcmfile-in dcmfile-out
DESCRIPTION
The dcmcjpls utility reads an uncompressed DICOM image (dcmfile-in), performs a JPEG-LS
compression (i. e. conversion to an encapsulated DICOM transfer syntax) and writes the
converted image to an output file (dcmfile-out).
PARAMETERS
dcmfile-in DICOM input filename to be converted ('-' for stdin)
dcmfile-out DICOM output filename ('-' for stdout)
OPTIONS
general options
-h --help
print this help text and exit
--version
print version information and exit
--arguments
print expanded command line arguments
-q --quiet
quiet mode, print no warnings and errors
-v --verbose
verbose mode, print processing details
-d --debug
debug mode, print debug information
-ll --log-level [l]evel: string constant
(fatal, error, warn, info, debug, trace)
use level l for the logger
-lc --log-config [f]ilename: string
use config file f for the logger
input options
input file format:
+f --read-file
read file format or data set (default)
+fo --read-file-only
read file format only
-f --read-dataset
read data set without file meta information
input transfer syntax:
-t= --read-xfer-auto
use TS recognition (default)
-td --read-xfer-detect
ignore TS specified in the file meta header
-te --read-xfer-little
read with explicit VR little endian TS
-tb --read-xfer-big
read with explicit VR big endian TS
-ti --read-xfer-implicit
read with implicit VR little endian TS
JPEG-LS encoding options
JPEG-LS process:
+el --encode-lossless
encode JPEG-LS lossless only TS (default)
# This options selects the JPEG-LS lossless only transfer syntax
# and performs a lossless compression.
+en --encode-nearlossless
encode JPEG-LS near-lossless TS (NEAR: 2)
# This options selects the JPEG-LS lossy transfer syntax
# and performs a near-lossless compression.
JPEG-LS bit rate (near-lossless only):
+md --max-deviation [d]eviation: integer (default: 2)
defines maximum deviation for an encoded pixel
# This option specifies the maximum deviation for a single pixel from
# the original pixel value.
lossless compression:
+pr --prefer-raw
prefer raw encoder mode (default)
# This option enables the raw encoder. The raw encoder encodes the
# complete pixel cell as it was read from the source image without
# performing any modifications.
+pc --prefer-cooked
prefer cooked encoder mode
# This option enables the cooked encoder. The cooked encoder moves
# overlay data to separate tags (60xx,3000) and only encodes the
# stored bits in each pixel.
JPEG-LS compression:
+t1 --threshold1 [t]hreshhold: integer
set JPEG-LS encoding parameter threshold 1
+t2 --threshold2 [t]hreshhold: integer
set JPEG-LS encoding parameter threshold 2
+t3 --threshold3 [t]hreshhold: integer
set JPEG-LS encoding parameter threshold 3
# By default, the values for T1, T2, T3 are computed based on
# the number of bits per sample.
+rs --reset [r]eset: integer (default: 64)
set JPEG-LS encoding parameter reset
JPEG-LS interleave:
+il --interleave-line
force line-interleaved JPEG-LS images (default)
# This flag forces line-interleaved mode for the resulting image.
# In line-interleave mode each line from the source image is
# compressed separately for each component and then the next line
# is encoded.
+is --interleave-sample
force sample-interleaved JPEG-LS images
# This flag forces sample-interleaved mode for the resulting image.
# In sample-interleave mode each pixel's components are encoded before
# the next pixel is encoded.
+iv --interleave-default
use the fastest possible interleave mode
# This flag selects an interleave mode based on the source image's mode.
# If possible, the image is not converted to a different interleave mode.
JPEG-LS padding of odd-length bitstreams:
+ps --padding-standard
pad with extended EOI marker (default)
# Pad odd-length JPEG-LS bitstreams by writing an extended end of image
# segment marker FF FF D9, as required by the DICOM standard.
+pz --padding-zero
pad with zero byte (non-standard)
# Pad odd-length JPEG-LS bitstreams by writing a zero byte after the
# end of image segment marker, i.e. FF D9 00. This is not DICOM conformant
# but required for interoperability with the HP LOCO reference implementation,
# which does not support extended JPEG-LS bitstreams.
encapsulated pixel data encoding options
encapsulated pixel data fragmentation:
+ff --fragment-per-frame
encode each frame as one fragment (default)
# This option causes the creation of one compressed fragment for each
# frame (recommended).
+fs --fragment-size [s]ize: integer
limit fragment size to s kbytes
# This option limits the fragment size which may cause the creation of
# multiple fragments per frame.
basic offset table encoding:
+ot --offset-table-create
create offset table (default)
# This option causes the creation of a valid offset table for the
# compressed JPEG fragments.
-ot --offset-table-empty
leave offset table empty
# This option causes the creation of an empty offset table
# for the compressed JPEG fragments.
SOP Class UID:
+cd --class-default
keep SOP Class UID (default)
# Keep the SOP Class UID of the source image.
+cs --class-sc
convert to Secondary Capture Image (implies --uid-always)
# Convert the image to Secondary Capture. In addition to the SOP Class
# UID, all attributes required for a valid secondary capture image are
# added. A new SOP instance UID is always assigned.
SOP Instance UID:
+ud --uid-default
assign new UID if lossy compression (default)
# Assigns a new SOP instance UID if the compression is lossy JPEG-LS.
+ua --uid-always
always assign new UID
# Unconditionally assigns a new SOP instance UID.
+un --uid-never
never assign new UID
# Never assigns a new SOP instance UID.
output options
post-1993 value representations:
+u --enable-new-vr
enable support for new VRs (UN/UT) (default)
-u --disable-new-vr
disable support for new VRs, convert to OB
group length encoding:
+g= --group-length-recalc
recalculate group lengths if present (default)
+g --group-length-create
always write with group length elements
-g --group-length-remove
always write without group length elements
length encoding in sequences and items:
+e --length-explicit
write with explicit lengths (default)
-e --length-undefined
write with undefined lengths
data set trailing padding:
-p= --padding-retain
do not change padding (default)
-p --padding-off
no padding
+p --padding-create [f]ile-pad [i]tem-pad: integer
align file on multiple of f bytes
and items on multiple of i bytes
NOTES
The dcmcjpls utility compresses DICOM images of all SOP classes. It processes all Pixel
Data (7fe0,0010) elements in the dataset, i.e. compression is also performed on an icon
image. However, dcmcjpls does not attempt to ensure that the compressed image still
complies with all restrictions of the object's IOD.
The user is responsible for making sure that the compressed images he creates are
compliant with the DICOM standard. If in question, the dcmcjpls utility allows one to
convert an image to secondary capture - this SOP class does not pose restrictions as the
ones mentioned above.
TRANSFER SYNTAXES
dcmcjpls supports the following transfer syntaxes for input (dcmfile-in):
LittleEndianImplicitTransferSyntax 1.2.840.10008.1.2
LittleEndianExplicitTransferSyntax 1.2.840.10008.1.2.1
DeflatedExplicitVRLittleEndianTransferSyntax 1.2.840.10008.1.2.1.99 (*)
BigEndianExplicitTransferSyntax 1.2.840.10008.1.2.2
(*) if compiled with zlib support enabled
dcmcjpls supports the following transfer syntaxes for output (dcmfile-out):
JPEGLSLosslessTransferSyntax 1.2.840.10008.1.2.4.80
JPEGLSLossyTransferSyntax 1.2.840.10008.1.2.4.81
LOGGING
The level of logging output of the various command line tools and underlying libraries can
be specified by the user. By default, only errors and warnings are written to the standard
error stream. Using option --verbose also informational messages like processing details
are reported. Option --debug can be used to get more details on the internal activity,
e.g. for debugging purposes. Other logging levels can be selected using option --log-
level. In --quiet mode only fatal errors are reported. In such very severe error events,
the application will usually terminate. For more details on the different logging levels,
see documentation of module 'oflog'.
In case the logging output should be written to file (optionally with logfile rotation),
to syslog (Unix) or the event log (Windows) option --log-config can be used. This
configuration file also allows for directing only certain messages to a particular output
stream and for filtering certain messages based on the module or application where they
are generated. An example configuration file is provided in <etcdir>/logger.cfg.
COMMAND LINE
All command line tools use the following notation for parameters: square brackets enclose
optional values (0-1), three trailing dots indicate that multiple values are allowed
(1-n), a combination of both means 0 to n values.
Command line options are distinguished from parameters by a leading '+' or '-' sign,
respectively. Usually, order and position of command line options are arbitrary (i.e. they
can appear anywhere). However, if options are mutually exclusive the rightmost appearance
is used. This behavior conforms to the standard evaluation rules of common Unix shells.
In addition, one or more command files can be specified using an '@' sign as a prefix to
the filename (e.g. @command.txt). Such a command argument is replaced by the content of
the corresponding text file (multiple whitespaces are treated as a single separator unless
they appear between two quotation marks) prior to any further evaluation. Please note that
a command file cannot contain another command file. This simple but effective approach
allows one to summarize common combinations of options/parameters and avoids longish and
confusing command lines (an example is provided in file <datadir>/dumppat.txt).
ENVIRONMENT
The dcmcjpls utility will attempt to load DICOM data dictionaries specified in the
DCMDICTPATH environment variable. By default, i.e. if the DCMDICTPATH environment variable
is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built
into the application (default for Windows).
The default behavior should be preferred and the DCMDICTPATH environment variable only
used when alternative data dictionaries are required. The DCMDICTPATH environment variable
has the same format as the Unix shell PATH variable in that a colon (':') separates
entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary
code will attempt to load each file specified in the DCMDICTPATH environment variable. It
is an error if no data dictionary can be loaded.
SEE ALSO
dcmdjpls(1)
COPYRIGHT
Copyright (C) 2009-2023 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.