Provided by: erlang-base_25.3.2.12+dfsg-1ubuntu2_amd64 
NAME
erl_call - Call/start a distributed Erlang node.
DESCRIPTION
erl_call makes it possible to start and/or communicate with a distributed Erlang node. It
is built upon the Erl_Interface library as an example application. Its purpose is to use a
Unix shell script to interact with a distributed Erlang node. It performs all
communication with the Erlang rex server, using the standard Erlang RPC facility. It does
not require any special software to be run at the Erlang target node.
The main use is to either start a distributed Erlang node or to make an ordinary function
call. However, it is also possible to pipe an Erlang module to erl_call and have it
compiled, or to pipe a sequence of Erlang expressions to be evaluated (similar to the
Erlang shell).
Options, which cause stdin to be read, can be used with advantage, as scripts from within
(Unix) shell scripts. Another nice use of erl_call could be from (HTTP) CGI-bin scripts.
EXPORTS
erl_call <options>
Starts/calls Erlang.
Each option flag is described below with its name, type, and meaning.
-a [Mod [Fun [Args]]]]:
(Optional.) Applies the specified function and returns the result. Mod must be
specified. However, start and [] are assumed for unspecified Fun and Args,
respectively. Args is to be in the same format as for erlang:apply/3 in ERTS
except only a subset of all terms are allowed. The allowed term types are: list
(and string representation of list, that is "example"), tuple, atom and number.
Notice that this flag takes exactly one argument, so quoting can be necessary
to group Mod, Fun, and Args in a manner dependent on the behavior of your
command shell.
-address [Hostname:]Port:
(One of -n, -name, -sname or -address is required.) Hostname is the hostname of
the machine that is running the peer node that erl_call shall communicate with.
The default hostname is the hostname of the local machine. Port is the port
number of the node that erl_call shall communicate with. The -address flag
cannot be combined with any of the flags -n, -name, -sname or -s.
The -address flag is typically useful when one wants to call a node that is
running on machine without an accessible epmd instance.
-c Cookie:
(Optional.) Use this option to specify a certain cookie. If no cookie is
specified, the ~/.erlang.cookie file is read and its content is used as cookie.
The Erlang node we want to communicate with must have the same cookie.
-d:
(Optional.) Debug mode. This causes all I/O to be output to the
~/.erl_call.out.Nodename file, where Nodename is the node name of the Erlang
node in question.
-e:
(Optional.) Reads a sequence of Erlang expressions, separated by comma (,) and
ended with a full stop (.), from stdin until EOF (Control-D). Evaluates the
expressions and returns the result from the last expression. Returns
{ok,Result} on success.
-fetch_stdout:
(Optional.) Executes the code, specified with the -a or -e option, in a new
process that has a group leader that forwards all stdout (standard output) data
so that it is printed to stdout of the erl_call process. This means that stdout
data that are written during the execution of the called code, by the code and
by descendant processes, will be forwarded (given that the group leader has not
been changed by a call to erlang:group_leader/2).
The printed data is UTF-8 encoded.
This option is only relevant together with the option -a or -e.
See the documentation of the I/O protocol, for more information about the group
leader concept.
Note:
This option only works when erl_call is interacting with a node with a version
greater or equal to OTP-24.
-h HiddenName:
(Optional.) Specifies the name of the hidden node that erl_call represents.
-m:
(Optional.) Reads an Erlang module from stdin and compiles it.
-n Node:
(One of -n, -name, -sname or -address is required.) Has the same meaning as
-name and can still be used for backward compatibility reasons.
-name Node:
(One of -n, -name, -sname or -address is required.) Node is the name of the
peer node to be started or communicated with. It is assumed that Node is
started with erl -name, which means that fully qualified long node names are
used. If option -s is specified, an Erlang node will (if necessary) be started
with erl -name.
-no_result_term:
(Optional.) Do not print the result term. This option is only relevant together
with the options -a and -e.
-q:
(Optional.) Halts the Erlang node specified with switch -n. This switch
overrides switch -s.
-r:
(Optional.) Generates a random name of the hidden node that erl_call
represents.
-R:
(Optional.) Request a dynamic random name, of the hidden node that erl_call
represents, from the peer node. Supported since OTP 23. Prefer -R over -r when
doing repeated requests toward the same peer node.
-s:
(Optional.) Starts a distributed Erlang node if necessary. This means that in a
sequence of calls, where '-s' and '-n Node' are constant, only the first call
starts the Erlang node. This makes the rest of the communication very fast.
This flag is currently only available on Unix-like platforms (Linux, Mac OS X,
Solaris, and so on).
-sname Node:
(One of -n, -name, -sname or -address is required.) Node is the name of the
peer node to be started or communicated with. It is assumed that Node is
started with erl -sname, which means that short node names are used. If option
-s is specified, an Erlang node is started (if necessary) with erl -sname.
-timeout Seconds:
(Optional.) Aborts the erl_call process after the timeout expires. Note that
this does not abort commands that have already been started with -a, -e, or
similar.
-v:
(Optional.) Prints a lot of verbose information. This is only useful for the
developer and maintainer of erl_call.
-x ErlScript:
(Optional.) Specifies another name of the Erlang startup script to be used. If
not specified, the standard erl startup script is used.
EXAMPLES
To start an Erlang node and call erlang:time/0:
erl_call -s -a 'erlang time' -n madonna
{18,27,34}
To terminate an Erlang node by calling erlang:halt/0:
erl_call -s -a 'erlang halt' -n madonna
To apply with many arguments:
erl_call -s -a 'lists seq [1,10]' -n madonna
To evaluate some expressions (the input ends with EOF (Control-D)):
erl_call -s -e -n madonna
statistics(runtime),
X=1,
Y=2,
{_,T}=statistics(runtime),
{X+Y,T}.
^D
{ok,{3,0}}
To compile a module and run it (again, the input ends with EOF (Control-D)):
(In the example, the output has been formatted afterwards.)
erl_call -s -m -a procnames -n madonna
-module(procnames).
-compile(export_all).
start() ->
P = processes(),
F = fun(X) -> {X,process_info(X,registered_name)} end,
lists:map(F,[],P).
^D
[{<madonna@chivas.du.etx.ericsson.se,0,0>,
{registered_name,init}},
{<madonna@chivas.du.etx.ericsson.se,2,0>,
{registered_name,erl_prim_loader}},
{<madonna@chivas.du.etx.ericsson.se,4,0>,
{registered_name,error_logger}},
{<madonna@chivas.du.etx.ericsson.se,5,0>,
{registered_name,application_controller}},
{<madonna@chivas.du.etx.ericsson.se,6,0>,
{registered_name,kernel}},
{<madonna@chivas.du.etx.ericsson.se,7,0>,
[]},
{<madonna@chivas.du.etx.ericsson.se,8,0>,
{registered_name,kernel_sup}},
{<madonna@chivas.du.etx.ericsson.se,9,0>,
{registered_name,net_sup}},
{<madonna@chivas.du.etx.ericsson.se,10,0>,
{registered_name,net_kernel}},
{<madonna@chivas.du.etx.ericsson.se,11,0>,
[]},
{<madonna@chivas.du.etx.ericsson.se,12,0>,
{registered_name,global_name_server}},
{<madonna@chivas.du.etx.ericsson.se,13,0>,
{registered_name,auth}},
{<madonna@chivas.du.etx.ericsson.se,14,0>,
{registered_name,rex}},
{<madonna@chivas.du.etx.ericsson.se,15,0>,
[]},
{<madonna@chivas.du.etx.ericsson.se,16,0>,
{registered_name,file_server}},
{<madonna@chivas.du.etx.ericsson.se,17,0>,
{registered_name,code_server}},
{<madonna@chivas.du.etx.ericsson.se,20,0>,
{registered_name,user}},
{<madonna@chivas.du.etx.ericsson.se,38,0>,
[]}]
To forward standard output without printing the result term (again, the input ends with
EOF (Control-D)):
erl_call -s -e -sname madonna -fetch_stdout -no_result_term
io:format("Number of schedulers: ~p~n", [erlang:system_info(schedulers)]),
io:format("Number of logical cores: ~p~n", [erlang:system_info(logical_processors_available)]).
^D
Number of schedulers: 8
Number of logical cores: 8