Provided by: graphicsmagick_1.4+really1.3.45-1build1_amd64 
SYNOPSIS
gm animate [ options ... ] file [ [ options ... ] file ... ]
gm batch [ options ... ] [ script ]
gm benchmark [ options ... ] subcommand
gm compare [ options ... ] reference-image [ options ... ] compare-image [ options ... ]
gm composite [ options ... ] change-image base-image [ mask-image ] output-image
gm conjure [ options ] script.msl [ [ options ] script.msl ]
gm convert [ [ options ... ] [ input-file ... ] [ options ... ] ] output-file
gm display [ options ... ] file ... [ [options ... ]file ... ]
gm identify file [ file ... ]
gm import [ options ... ] file
gm mogrify [ options ... ] file ...
gm montage [ options ... ] file [ [ options ... ] file ... ] output-file
gm time subcommand
gm version
DESCRIPTION
GraphicsMagick's gm provides a suite of utilities for creating, comparing, converting,
editing, and displaying images. All of the utilities are provided as sub-commands of a
single gm executable. The gm executable returns the exit code 0 to indicate success, or 1
to indicate failure:
animate displays an animation (e.g. a GIF file) on any workstation display running an X
server.
batch executes an arbitrary number of the utility commands (e.g. convert) in the form of a
simple linear batch script in order to improve execution efficiency, and/or to allow use
as a subordinate co-process under the control of an arbitrary script or program.
benchmark executes one of the other utility commands (e.g. convert) for a specified number
of iterations, or execution time, and reports execution time and other profiling
information such as CPU utilization. Benchmark provides various operating modes including
executing the command with a varying number of threads, and alternate reporting formats
such as comma-separated value (CSV).
compare compares two images and reports difference statistics according to specified
metrics and/or outputs an image with a visual representation of the differences. It may
also be used to test if images are similar within a particular range and specified metric,
returning a truth value to the executing environment.
composite composites images (blends or merges images together) to create new images.
conjure interprets and executes scripts in the Magick Scripting Language (MSL).
convert converts an input file using one image format to an output file with the same or
differing image format while applying an arbitrary number of image transformations.
display is a machine architecture independent image processing and display facility. It
can display an image on any workstation display running an X server.
identify describes the format and characteristics of one or more image files. It will also
report if an image is incomplete or corrupt.
import reads an image from any visible window on an X server and outputs it as an image
file. You can capture a single window, the entire screen, or any rectangular portion of
the screen.
mogrify transforms an image or a sequence of images. These transforms include image
scaling, image rotation, color reduction, and others. The transmogrified image overwrites
the original image.
montage creates a composite by combining several separate images. The images are tiled on
the composite image with the name of the image optionally appearing just below the
individual tile.
time executes a subcommand and reports the user, system, and total execution time
consumed.
version reports the GraphicsMagick release version, maximum sample-depth, copyright
notice, supported features, and the options used while building the software.
The GraphicsMagick utilities recognize the following image formats:
Name Mode Description
o 3FR r-- Hasselblad Photo RAW
o 8BIM rw- Photoshop resource format
o 8BIMTEXT rw- Photoshop resource text format
o 8BIMWTEXT rw- Photoshop resource wide text format
o APP1 rw- Raw application information
o APP1JPEG rw- Raw JPEG binary data
o ART r-- PF1: 1st Publisher
o ARW r-- Sony Alpha DSLR RAW
o AVS rw+ AVS X image
o BIE rw- Joint Bi-level Image experts Group
interchange format
o BMP rw+ Microsoft Windows bitmap image
o BMP2 -w- Microsoft Windows bitmap image v2
o BMP3 -w- Microsoft Windows bitmap image v3
o CACHE --- Magick Persistent Cache image format
o CALS rw- Continuous Acquisition and Life-cycle
Support Type 1 image
o CAPTION r-- Caption (requires separate size info)
o CIN rw- Kodak Cineon Format
o CMYK rw- Raw cyan, magenta, yellow, and black
samples (8 or 16 bits, depending on
the image depth)
o CMYKA rw- Raw cyan, magenta, yellow, black, and
matte samples (8 or 16 bits, depending
on the image depth)
o CR2 r-- Canon Photo RAW
o CRW r-- Canon Photo RAW
o CUR r-- Microsoft Cursor Icon
o CUT r-- DR Halo
o DCM r-- Digital Imaging and Communications in
Medicine image
o DCR r-- Kodak Photo RAW
o DCX rw+ ZSoft IBM PC multi-page Paintbrush
o DNG r-- Adobe Digital Negative
o DPX rw- Digital Moving Picture Exchange
o EPDF rw- Encapsulated Portable Document Format
o EPI rw- Adobe Encapsulated PostScript
Interchange format
o EPS rw- Adobe Encapsulated PostScript
o EPS2 -w- Adobe Level II Encapsulated PostScript
o EPS3 -w- Adobe Level III Encapsulated PostScript
o EPSF rw- Adobe Encapsulated PostScript
o EPSI rw- Adobe Encapsulated PostScript
Interchange format
o EPT rw- Adobe Encapsulated PostScript with MS-DOS
TIFF preview
o EPT2 rw- Adobe Level II Encapsulated PostScript
with MS-DOS TIFF preview
o EPT3 rw- Adobe Level III Encapsulated PostScript
with MS-DOS TIFF preview
o EXIF rw- Exif digital camera binary data
o FAX rw+ Group 3 FAX (Not TIFF Group3 FAX!)
o FITS rw- Flexible Image Transport System
o FRACTAL r-- Plasma fractal image
o FPX rw- FlashPix Format
o GIF rw+ CompuServe graphics interchange format
o GIF87 rw- CompuServe graphics interchange format
(version 87a)
o GRADIENT r-- Gradual passing from one shade to
another
o GRAY rw+ Raw gray samples (8/16/32 bits,
depending on the image depth)
o HISTOGRAM -w- Histogram of the image
o HRZ r-- HRZ: Slow scan TV
o HTML -w- Hypertext Markup Language and a
client-side image map
o ICB rw+ Truevision Targa image
o ICC rw- ICC Color Profile
o ICM rw- ICC Color Profile
o ICO r-- Microsoft icon
o ICON r-- Microsoft icon
o IDENTITY r-- Hald CLUT identity image
o IMAGE r-- GraphicsMagick Embedded Image
o INFO -w+ Image descriptive information and
statistics
o IPTC rw- IPTC Newsphoto
o IPTCTEXT rw- IPTC Newsphoto text format
o IPTCWTEXT rw- IPTC Newsphoto wide text format
o JBG rw+ Joint Bi-level Image experts Group
interchange format
o JBIG rw+ Joint Bi-level Image experts Group
interchange format
o JNG rw- JPEG Network Graphics
o JP2 rw- JPEG-2000 JP2 File Format Syntax
o JPC rw- JPEG-2000 Code Stream Syntax
o JPEG rw- Joint Photographic Experts Group
JFIF format
o JPG rw- Joint Photographic Experts Group
JFIF format
o K25 r-- Kodak Photo RAW
o KDC r-- Kodak Photo RAW
o LABEL r-- Text image format
o M2V rw+ MPEG-2 Video Stream
o MAP rw- Colormap intensities and indices
o MAT r-- MATLAB image format
o MATTE -w+ MATTE format
o MIFF rw+ Magick Image File Format
o MNG rw+ Multiple-image Network Graphics
o MONO rw- Bi-level bitmap in least-significant-
-byte-first order
o MPC rw+ Magick Persistent Cache image format
o MPEG rw+ MPEG-1 Video Stream
o MPG rw+ MPEG-1 Video Stream
o MRW r-- Minolta Photo Raw
o MSL r-- Magick Scripting Language
o MTV rw+ MTV Raytracing image format
o MVG rw- Magick Vector Graphics
o NEF r-- Nikon Electronic Format
o NULL r-- Constant image of uniform color
o OTB rw- On-the-air bitmap
o P7 rw+ Xv thumbnail format
o PAL rw- 16bit/pixel interleaved YUV
o PALM rw- Palm Pixmap
o PBM rw+ Portable bitmap format (black and white)
o PCD rw- Photo CD
o PCDS rw- Photo CD
o PCL -w- Page Control Language
o PCT rw- Apple Macintosh QuickDraw/PICT
o PCX rw- ZSoft IBM PC Paintbrush
o PDB rw+ Palm Database ImageViewer Format
o PDF rw+ Portable Document Format
o PEF r-- Pentax Electronic File
o PFA r-- TrueType font
o PFB r-- TrueType font
o PGM rw+ Portable graymap format (gray scale)
o PGX r-- JPEG-2000 VM Format
o PICON rw- Personal Icon
o PICT rw- Apple Macintosh QuickDraw/PICT
o PIX r-- Alias/Wavefront RLE image format
o PLASMA r-- Plasma fractal image
o PNG rw- Portable Network Graphics
o PNG24 rw- Portable Network Graphics, 24 bit RGB
opaque only
o PNG32 rw- Portable Network Graphics, 32 bit RGBA
semitransparency OK
o PNG8 rw- Portable Network Graphics, 8-bit
indexed, binary transparency only
o PNM rw+ Portable anymap
o PPM rw+ Portable pixmap format (color)
o PREVIEW -w- Show a preview an image enhancement,
effect, or f/x
o PS rw+ Adobe PostScript
o PS2 -w+ Adobe Level II PostScript
o PS3 -w+ Adobe Level III PostScript
o PSD rw- Adobe Photoshop bitmap
o PTIF rw- Pyramid encoded TIFF
o PWP r-- Seattle Film Works
o RAF r-- Fuji Photo RAW
o RAS rw+ SUN Rasterfile
o RGB rw+ Raw red, green, and blue samples
o RGBA rw+ Raw red, green, blue, and matte samples
o RLA r-- Alias/Wavefront image
o RLE r-- Utah Run length encoded image
o SCT r-- Scitex HandShake
o SFW r-- Seattle Film Works
o SGI rw+ Irix RGB image
o SHTML -w- Hypertext Markup Language and a
client-side image map
o STEGANO r-- Steganographic image
o SUN rw+ SUN Rasterfile
o SVG rw+ Scalable Vector Gaphics
o TEXT rw+ Raw text
o TGA rw+ Truevision Targa image
o TIFF rw+ Tagged Image File Format
o TILE r-- Tile image with a texture
o TIM r-- PSX TIM
o TOPOL r-- TOPOL X Image
o TTF r-- TrueType font
o TXT rw+ Raw text
o UIL -w- X-Motif UIL table
o UYVY rw- 16bit/pixel interleaved YUV
o VDA rw+ Truevision Targa image
o VICAR rw- VICAR rasterfile format
o VID rw+ Visual Image Directory
o VIFF rw+ Khoros Visualization image
o VST rw+ Truevision Targa image
o WBMP rw- Wireless Bitmap (level 0) image
o WMF r-- Windows Metafile
o WPG r-- Word Perfect Graphics
o X rw- X Image
o X3F r-- Foveon X3 (Sigma/Polaroid) RAW
o XBM rw- X Windows system bitmap (black
and white)
o XC r-- Constant image uniform color
o XCF r-- GIMP image
o XMP rw- Adobe XML metadata
o XPM rw- X Windows system pixmap (color)
o XV rw+ Khoros Visualization image
o XWD rw- X Windows system window dump (color)
o YUV rw- CCIR 601 4:1:1 or 4:2:2 (8-bit only)
Modes:
r Read
w Write
+ Multi-image
Support for some of these formats require additional programs or libraries. See README in
the source package for where to find optional additional software.
Note, a format delineated with + means that if more than one image is specified, frames
are combined into a single multi-image file. Use +adjoin if you want a single image
produced for each frame.
Your installation might not support all of the formats in the list. To get an accurate
listing of the formats supported by your particular configuration, run "gm convert -list
format".
Raw images are expected to have one byte per pixel unless gm is compiled in 16-bit quantum
mode or in 32-bit quantum mode. Here, the raw data is expected to be stored two or four
bytes per pixel, respectively, in most-significant-byte-first order. For example, you can
tell if gm was compiled in 16-bit mode by typing "gm version" without any options, and
looking for "Q:16" in the first line of output.
FILES AND FORMATS
By default, the image format is determined by its magic number, i.e., the first few bytes
of the file. To specify a particular image format, precede the filename with an image
format name and a colon (i.e.ps:image) or specify the image type as the filename suffix
(i.e.image.ps). The magic number takes precedence over the filename suffix and the prefix
takes precedence over the magic number and the suffix in input files. When a file is
read, its magic number is stored in the "image->magick" string. In output files, the
prefix takes precedence over the filename suffix, and the filename suffix takes precedence
over the "image->magick" string.
To read the "built-in" formats (GRANITE, H, LOGO, NETSCAPE, PLASMA, and ROSE) use a prefix
(including the colon) without a filename or suffix. To read the XC format, follow the
colon with a color specification. To read the CAPTION format, follow the colon with a
text string or with a filename prefixed with the at symbol (@).
When you specify X as your image type, the filename has special meaning. It specifies an X
window by id, name, or root. If no filename is specified, the window is selected by
clicking the mouse in the desired window.
Specify input_file as - for standard input, output_file as - for standard output. If
input_file has the extension .Z or .gz, the file is uncompressed with uncompress or gunzip
respectively. If output_file has the extension .Z or .gz, the file is compressed using
with compress or gzip respectively.
Use an optional index enclosed in brackets after an input file name to specify a desired
subimage of a multi-resolution image format like Photo CD (e.g. "img0001.pcd[4]") or a
range for MPEG images (e.g. "video.mpg[50-75]"). A subimage specification can be disjoint
(e.g. "image.tiff[2,7,4]"). For raw images, specify a subimage with a geometry (e.g. -size
640x512 "image.rgb[320x256+50+50]"). Surround the image name with quotation marks to
prevent your shell from interpreting the square brackets. Single images are written with
the filename you specify. However, multi-part images (e.g., a multi-page PostScript
document with +adjoin specified) may be written with the scene number included as part of
the filename. In order to include the scene number in the filename, it is necessary to
include a printf-style %d format specification in the file name and use the +adjoin
option. For example,
image%02d.miff
writes files image00.miff, image01.miff, etc. Only a single specification is allowed
within an output filename. If more than one specification is present, it will be ignored.
It is best to embed the scene number in the base part of the file name, not in the
extension, because the extension will not be a recognizable image type.
When running a commandline utility, you can prepend an at sign @ to a filename to read a
list of image filenames from that file. This is convenient in the event you have too many
image filenames to fit on the command line.
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect for the set of images that follows, until the set is terminated by the
appearance of any option or -noop. Some options only affect the decoding of images and
others only the encoding. The latter can appear after the final group of input images.
This is a combined list of the command-line options used by the GraphicsMagick utilities
(animate, compare, composite, convert, display, identify, import, mogrify and montage).
In this document, angle brackets ("<>") enclose variables and curly brackets ("{}")
enclose optional parameters. For example, "-fuzz <distance>{%}" means you can use the
option "-fuzz 10" or "-fuzz 2%".
-adjoin
join images into a single multi-image file
By default, all images of an image sequence are stored in the same file. However,
some formats (e.g. JPEG) do not support storing more than one image per file and
only the first frame in an image sequence will be saved unless the result is saved
to separate files. Use +adjoin to force saving multiple frames to multiple numbered
files. If +adjoin is used, then the output filename must include a printf style
formatting specification for the numeric part of the filename. For example,
image%02d.miff
-affine <matrix>
drawing transform matrix
This option provides a transform matrix {sx,rx,ry,sy,tx,ty} for use by subsequent
-draw or -transform options.
-antialias
remove pixel aliasing
By default antialiasing algorithms are used when drawing objects (e.g. lines) or
rendering vector formats (e.g. WMF and Postscript). Use +antialias to disable use
of antialiasing algorithms. Reasons to disable antialiasing include avoiding
increasing colors in the image, or improving rendering speed.
-append
append a set of images
This option creates a single image where the images in the original set are stacked
top-to-bottom. If they are not of the same width, any narrow images will be
expanded to fit using the background color. Use +append to stack images left-to-
right. The set of images is terminated by the appearance of any option. If the
-append option appears after all of the input images, all images are appended.
-asc-cdl <spec>
apply ASC CDL color transform
Applies ("bakes in") the ASC CDL, which is a format for the exchange of basic
primary color grading information between equipment and software from different
manufacturers. The format defines the math for three functions: slope, offset and
power. Each function uses a number for the red, green, and blue color channels for
a total of nine numbers comprising a single color decision. The tenth number
(optional) is for chromiance (saturation) as specified by ASC CDL 1.2.
The argument string is comma delimited and is in the following form (but without
invervening spaces or line breaks)
redslope,redoffset,redpower:
greenslope,greenoffset,greenpower:
blueslope,blueoffset,bluepower:
saturation
with the unity (no change) specification being:
"1.0,0.0,1.0:1.0,0.0,1.0:1.0,0.0,1.0:1.0"
-authenticate <string>
decrypt image with this password
Use this option to supply a password for decrypting an image or an image sequence,
if it is being read from a format such as PDF that supports encryption. Encrypting
images being written is not supported.
-auto-orient
orient (rotate) image so it is upright
Adjusts the image orientation so that it is suitable for viewing. Uses the
orientation tag obtained from the image file or as supplied by the -orient option.
-average
average a set of images
The set of images is terminated by the appearance of any option. If the -average
option appears after all of the input images, all images are averaged.
-backdrop
display the image centered on a backdrop.
This backdrop covers the entire workstation screen and is useful for hiding other X
window activity while viewing the image. The color of the backdrop is specified as
the foreground color (X11 default is black). Refer to "X Resources", below, for
details.
-background <color>
the background color
The color is specified using the format described under the -fill option.
-black-threshold red[,green][,blue][,opacity]
pixels below the threshold become black
Use -black-threshold to set pixels with values below the specified threshold to
minimum value (black). If only one value is supplied, or the red, green, and blue
values are identical, then intensity thresholding is used. If the color threshold
values are not identical then channel-based thresholding is used, and color
distortion will occur. Specify a negative value (e.g. -1) if you want a channel to
be ignored but you do want to threshold a channel later in the list. If a percent
(%) symbol is appended, then the values are treated as a percentage of maximum
range.
-blue-primary <x>,<y>
blue chromaticity primary point
-blur <radius>{x<sigma>}
blur the image with a Gaussian operator
Blur with the given radius and standard deviation (sigma).
-border <width>x<height>
surround the image with a border of color
See -geometry for details about the geometry specification.
-bordercolor <color>
the border color
The color is specified using the format described under the -fill option.
-borderwidth <geometry>
the border width
-box <color>
set the color of the annotation bounding box
The color is specified using the format described under the -fill option.
See -draw for further details.
-channel <type>
the type of channel
Choose from: Red, Green, Blue, Opacity, Matte, Cyan, Magenta, Yellow, Black, or
Gray.
Use this option to extract a particular channel from the image. Opacity, for
example, is useful for extracting the opacity values from an image.
-charcoal <factor>
simulate a charcoal drawing
-chop <width>x<height>{+-}<x>{+-}<y>{%}
remove pixels from the interior of an image
Width and height give the number of columns and rows to remove, and x and y are
offsets that give the location of the leftmost column and topmost row to remove.
The x offset normally specifies the leftmost column to remove. If the -gravity
option is present with NorthEast, East, or SouthEast gravity, it gives the distance
leftward from the right edge of the image to the rightmost column to remove.
Similarly, the y offset normally specifies the topmost row to remove, but if the
-gravity option is present with SouthWest, South, or SouthEast gravity, it
specifies the distance upward from the bottom edge of the image to the bottom row
to remove.
The -chop option removes entire rows and columns, and moves the remaining corner
blocks leftward and upward to close the gaps.
-clip apply the clipping path, if one is present
If a clipping path is present, it will be applied to subsequent operations.
For example, if you type the following command:
gm convert -clip -negate cockatoo.tif negated.tif
only the pixels within the clipping path are negated.
The -clip feature requires the XML library. If the XML library is not present, the
option is ignored.
-coalesce
merge a sequence of images
Each image N in the sequence after Image 0 is replaced with the image created by
flattening images 0 through N.
The set of images is terminated by the appearance of any option. If the -coalesce
option appears after all of the input images, all images are coalesced.
-colorize <value>
colorize the image with the pen color
Specify the amount of colorization as a percentage. You can apply separate
colorization values to the red, green, and blue channels of the image with a
colorization value list delimited with slashes (e.g. 0/0/50).
The -colorize option may be used in conjunction with -modulate to produce a nice
sepia toned image like:
gm convert input.ppm -modulate 115,0,100 \
-colorize 7,21,50 output.ppm.
-colormap <type>
define the colormap type
Choose between shared or private.
This option only applies when the default X server visual is PseudoColor or
GRAYScale. Refer to -visual for more details. By default, a shared colormap is
allocated. The image shares colors with other X clients. Some image colors could
be approximated, therefore your image may look very different than intended. Choose
Private and the image colors appear exactly as they are defined. However, other
clients may go technicolor when the image colormap is installed.
-colors <value>
preferred number of colors in the image
The actual number of colors in the image may be less than your request, but never
more. Note, this is a color reduction option. Images with less unique colors than
specified with this option will have any duplicate or unused colors removed. The
ordering of an existing color palette may be altered. When converting an image from
color to grayscale, convert the image to the gray colorspace before reducing the
number of colors since doing so is most efficient. Refer to <a
href="quantize.html">quantize for more details.
Note, options -dither, -colorspace, and -treedepth affect the color reduction
algorithm.
-colorspace <value>
the type of colorspace
Choices are: CineonLog, CMYK, GRAY, HSL, HWB, OHTA, RGB, Rec601Luma, Rec709Luma,
Rec601YCbCr, Rec709YCbCr, Transparent, XYZ, YCbCr, YIQ, YPbPr, or YUV.
Color reduction, by default, takes place in the RGB color space. Empirical evidence
suggests that distances in color spaces such as YUV or YIQ correspond to perceptual
color differences more closely than do distances in RGB space. These color spaces
may give better results when color reducing an image. Refer to quantize for more
details. Two gray colorspaces are supported. The Rec601Luma space is based on the
recommendations for legacy NTSC television (ITU-R BT.601-5). The Rec709Luma space
is based on the recommendations for HDTV (Rec. ITU-R BT.709-5) and is suitable for
use with computer graphics, and for contemporary CRT displays. The GRAY colorspace
currently selects the Rec601Luma colorspace by default for backwards compatibly
reasons. This default may be re-considered in the future.
Two YCbCr colorspaces are supported. The Rec601YCbCr space is based on the
recommendations for legacy NTSC television (ITU-R BT.601-5). The Rec709CbCr space
is based on the recommendations for HDTV (Rec. ITU-R BT.709-5) and is suitable for
suitable for use with computer graphics, and for contemporary CRT displays. The
YCbCr colorspace specification is equivalent toRec601YCbCr.
The Transparent color space behaves uniquely in that it preserves the matte channel
of the image if it exists.
The -colors or -monochrome option, or saving to a file format which requires color
reduction, is required for this option to take effect.
-comment <string>
annotate an image with a comment
Use this option to assign a specific comment to the image, when writing to an image
format that supports comments. You can include the image filename, type, width,
height, or other image attribute by embedding special format characters listed
under the -format option. The comment is not drawn on the image, but is embedded
in the image datastream via a "Comment" tag or similar mechanism. If you want the
comment to be visible on the image itself, use the -draw option instead.
For example,
-comment "%m:%f %wx%h"
produces an image comment of MIFF:bird.miff 512x480 for an image titled bird.miff
and whose width is 512 and height is 480.
If the first character of string is @, the image comment is read from a file titled
by the remaining characters in the string. Please note that if the string comes
from an untrusted source that it should be sanitized before use since otherwise the
content of an arbitrary readable file could be incorporated in a comment in the
output file (a security risk).
If the -comment option appears multiple times, only the last comment is stored.
In PNG images, the comment is stored in a tEXt or zTXt chunk with the keyword
"comment".
-compose <operator>
the type of image composition
The description of composition uses abstract terminology in order to allow the the
description to be more clear, while avoiding constant values which are specific to
a particular build configuration. Each image pixel is represented by red, green,
and blue levels (which are equal for a gray pixel). MaxRGB is the maximum integral
value which may be stored in the red, green, or blue channels of the image. Each
image pixel may also optionally (if the image matte channel is enabled) have an
associated level of opacity (ranging from opaque to transparent), which may be used
to determine the influence of the pixel color when compositing the pixel with
another image pixel. If the image matte channel is disabled, then all pixels in the
image are treated as opaque. The color of an opaque pixel is fully visible while
the color of a transparent pixel color is entirely absent (pixel color is ignored).
By definition, raster images have a rectangular shape. All image rows are of equal
length, and all image columns have the same number of rows. By treating the opacity
channel as a visual "mask" the rectangular image may be given a "shape" by treating
the opacity channel as a cookie-cutter for the image. Pixels within the shape are
opaque, while pixels outside the shape are transparent. Pixels on the boundary of
the shape may be between opaque and transparent in order to provide antialiasing
(visually smooth edges). The description of the composition operators use this
concept of image "shape" in order to make the description of the operators easier
to understand. While it is convenient to describe the operators in terms of
"shapes" they are by no means limited to mask-style operations since they are based
on continuous floating-point mathematics rather than simple boolean operations.
By default, the Over composite operator is used. The following composite operators
are available:
Over
In
Out
Atop
Xor
Plus
Minus
Add
Subtract
Difference
Divide
Multiply
Bumpmap
Copy
CopyRed
CopyGreen
CopyBlue
CopyOpacity
CopyCyan
CopyMagenta
CopyYellow
CopyBlack
The behavior of each operator is described below.
Over
The result will be the union of the two image shapes, with opaque areas of
change-image obscuring base-image in the region of overlap.
In
The result is simply change-image cut by the shape of base-image. None of the
image data of base-image will be in the result.
Out
The resulting image is change-image with the shape of base-image cut out.
Atop
The result is the same shape as base-image, with change-image obscuring base-
image where the image shapes overlap. Note this differs from over because the
portion of change-image outside base-image's shape does not appear in the
result.
Xor
The result is the image data from both change-image and base-image that is
outside the overlap region. The overlap region will be blank.
Plus
The result is just the sum of the image data. Output values are cropped to
MaxRGB (no overflow). This operation is independent of the matte channels.
Minus
The result of change-image - base-image, with underflow cropped to zero. The
matte channel is ignored (set to opaque, full coverage).
Add
The result of change-image + base-image, with overflow wrapping around (mod
MaxRGB+1).
Subtract
The result of change-image - base-image, with underflow wrapping around (mod
MaxRGB+1). The add and subtract operators can be used to perform reversible
transformations.
Difference
The result of abs(change-image - base-image). This is useful for comparing
two very similar images.
Divide
The result of change-image / base-image. This is useful for improving the
readability of text on unevenly illuminated photos (by using a gaussian
blurred copy of change-image as base-image).
Multiply
The result of change-image * base-image. This is useful for the creation of
drop-shadows.
Bumpmap
The result base-image shaded by change-image.
Copy
The resulting image is base-image replaced with change-image. Here the matte
information is ignored.
CopyRed
The resulting image is the red channel in base-image replaced with the red
channel in change-image. The other channels are copied untouched.
CopyGreen
The resulting image is the green channel in base-image replaced with the
green channel in change-image. The other channels are copied untouched.
CopyBlue
The resulting image is the blue channel in base-image replaced with the blue
channel in change-image. The other channels are copied untouched.
CopyOpacity
The resulting image is the opacity channel in base-image replaced with the
opacity channel in change-image. The other channels are copied untouched.
CopyCyan
The resulting image is the cyan channel in base-image replaced with the cyan
channel in change-image. The other channels are copied untouched. Use of this
operator requires that base-image be in CMYK(A) colorspace.
CopyMagenta
The resulting image is the magenta channel in base-image replaced with the
magenta channel in change-image. The other channels are copied untouched. Use
of this operator requires that base-image be in CMYK(A) colorspace.
CopyYellow
The resulting image is the yellow channel in base-image replaced with the
yellow channel in change-image. The other channels are copied untouched. Use
of this operator requires that base-image be in CMYK(A) colorspace.
CopyBlack
The resulting image is the black channel in base-image replaced with the
black channel in change-image. The other channels are copied untouched. Use
of this operator requires that base-image be in CMYK(A) colorspace. If
change-image is not in CMYK space, then the change-image pixel intensities
are used.
-compress <type>
the type of image compression
Choices are: None, BZip, Fax, Group3, Group4, JPEG, Lossless, LZW, RLE, Zip, LZMA,
JPEG2000, JPEG2000, JBIG, JBIG2, WebP, or ZSTD.
Specify +compress to store the binary image in an uncompressed format. The default
is the compression type of the specified image file.
"Lossless" refers to lossless JPEG, which is only available if the JPEG library has
been patched to support it. Use of lossless JPEG is generally not recommended.
Use the -quality option to set the compression level to be used by the JPEG,
JPEG-2000, PNG, MIFF, MPEG, and TIFF encoders. Use the -sampling-factor option to
set the sampling factor to be used by the DPX, JPEG, MPEG, and YUV encoders for
downsampling the chroma channels.
-contrast
enhance or reduce the image contrast
This option enhances the intensity differences between the lighter and darker
elements of the image. Use -contrast to enhance the image or +contrast to reduce
the image contrast.
For a more pronounced effect you can repeat the option:
gm convert rose: -contrast -contrast rose_c2.png
-convolve <kernel>
convolve image with the specified convolution kernel
The kernel is specified as a comma-separated list of floating point values, ordered
left-to right, starting with the top row. The order of the kernel is determined by
the square root of the number of entries. Presently only square kernels are
supported.
-create-directories
create output directory if required
Use this option with -output-directory if the input paths contain subdirectories
and it is desired to create similar subdirectories in the output directory.
Without this option, mogrify will fail if the required output directory does not
exist.
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
See -geometry for details about the geometry specification.
The width and height give the size of the image that remains after cropping, and x
and y are offsets that give the location of the top left corner of the cropped
image with respect to the original image. To specify the amount to be removed, use
-shave instead.
If the x and y offsets are present, a single image is generated, consisting of the
pixels from the cropping region. The offsets specify the location of the upper
left corner of the cropping region measured downward and rightward with respect to
the upper left corner of the image. If the -gravity option is present with
NorthEast, East, or SouthEast gravity, it gives the distance leftward from the
right edge of the image to the right edge of the cropping region. Similarly, if
the -gravity option is present with SouthWest, South, or SouthEast gravity, the
distance is measured upward between the bottom edges.
If the x and y offsets are omitted, a set of tiles of the specified geometry,
covering the entire input image, is generated. The rightmost tiles and the bottom
tiles are smaller if the specified geometry extends beyond the dimensions of the
input image.
-cycle <amount>
displace image colormap by amount
Amount defines the number of positions each colormap entry isshifted.
-debug <events>
enable debug printout
The events parameter specifies which events are to be logged. It can be either
None, All, or a comma-separated list consisting of one or more of the following
domains: Annotate, Blob, Cache, Coder, Configure, Deprecate, Error, Exception,
FatalError, Information, Locale, Option, Render, Resource, TemporaryFile,
Transform, User, Warning, or X11, For example, to log cache and blob events, use
gm convert -debug "Cache,Blob" rose: rose.png
The "User" domain is normally empty, but developers can log "User" events in their
private copy of GraphicsMagick.
Use the -log option to specify the format for debugging output.
Use +debug to turn off all logging.
An alternative to using -debug is to use the MAGICK_DEBUG environment variable. The
allowed values for the MAGICK_DEBUG environment variable are the same as for the
-debug option.
-deconstruct
break down an image sequence into constituent parts
This option compares each image with the next in a sequence and returns the maximum
bounding region of any pixel differences it discovers. This method can undo a
coalesced sequence returned by the -coalesce option, and is useful for removing
redundant information from a GIF or MNG animation.
The sequence of images is terminated by the appearance of any option. If the
-deconstruct option appears after all of the input images, all images are
deconstructed.
-define <key>{=<value>},...
add coder/decoder specific options This option creates one or more definitions for
coders and decoders to use while reading and writing image data. Definitions may be
passed to coders and decoders to control options that are specific to certain image
formats. If value is missing for a definition, an empty-valued definition of a flag
will be created with that name. This is used to control on/off options. Use +define
<key>,... to remove definitions previously created. Use +define "*" to remove all
existing definitions.
The following definitions may be created:
bmp:allow-jpeg={true|false}
If the bmp:allow-jpeg value is set to true, then enable BMP files using JPEG
compression, under control of the compression option (which may be JPEG
already if the input file is JPEG). JPEG-compressed BMP files are very rare
so this option acts as a safeguard to assure that the current compression
setting does not accidentally produce JPEG-compressed BMP files which most
other software is unable to read.
cineon:colorspace={rgb|cineonlog}
Use the cineon:colorspace option when reading a Cineon file to specify the
colorspace the Cineon file uses. This overrides the colorspace type implied
by the DPX header (if any).
dpx:bits-per-sample=<value>
If the dpx:bits-per-sample key is defined, GraphicsMagick will write DPX
images with the specified bits per sample, overriding any existing depth
value. If this option is not specified, then the value is based on the
existing image depth value from the original image file. The DPX standard
supports bits per sample values of 1, 8, 10, 12, and 16. Many DPX readers
demand a sample size of 10 bits with type A padding (see below).
dpx:colorspace={rgb|cineonlog}
Use the dpx:colorspace option when reading a DPX file to specify the
colorspace the DPX file uses. This overrides the colorspace type implied by
the DPX header (if any).
dpx:packing-method={packed|a|b|lsbpad|msbpad}
DPX samples are output within 32-bit words. They may be tightly packed end-
to-end within the words ("packed"), padded with null bits to the right of the
sample ("a" or "lsbpad"), or padded with null bits to the left of the sample
("b" or "msbpad"). This option only has an effect for sample sizes of 10 or
12 bits. If samples are not packed, the DPX standard recommends type A
padding. Many DPX readers demand a sample size of 10 bits with type A
padding.
dpx:pixel-endian={lsb|msb}
Allows the user to specify the endian order of the pixels when reading or
writing the DPX files. Sometimes this is useful if the file is (or must be)
written incorrectly so that the file header and the pixels use different
endianness.
dpx:swap-samples={true|false}
dpx:swap-samples-read={true|false}
dpx:swap-samples-write={true|false}
GraphicsMagick strives to adhere to the DPX standard but certain aspects of
the standard can be quite confusing. As a result, some 10-bit DPX files have
Red and Blue interchanged, or Cb and Cr interchanged due to an different
interpretation of the standard, or getting the wires crossed. The swap-
samples option may be supplied when reading or writing in order to read or
write using the necessary sample order. Use swap-samples-read when swapping
should only occur in the reader, or swap-samples-write when swapping should
only occur in the writer.
heif:ignore-transformations={true|false}
Return HEIF (e.g. HEIC/AVIF) image without any transformations (e.g.
rotation) applied.
gradient:direction={South|North|West|East|NorthWest|NorthEast|SouthWest|SouthEast}
By default, the gradient coder produces a gradient from top to bottom
("South"). Since GraphicsMagick 1.3.35, the gradient direction may be
specified to produce gradient vectors according to a gravity-like
specification. The arguments are South (Top to Bottom), North (Bottom to
Top), West (Right to Left), East (Left to Right), NorthWest (Bottom-Right to
Top-Left), NorthEast (Bottom-Left to Top-Right), SouthWest (Top-Right Bottom-
Left), and SouthEast (Top-Left to Bottom-Right).
jp2:rate=<value>
Specify the compression factor to use while writing JPEG-2000 files. The
compression factor is the reciprocal of the compression ratio. The valid
range is 0.0 to 1.0, with 1.0 indicating lossless compression. If defined,
this value overrides the -quality setting. The default quality setting of 75
results in a rate value of 0.06641.
jpeg:arithmetic-coding={true|false}
Enables or disables arithmetic encoding if the JPEG library supports it
(default disabled). When this is enabled, optimize-coding is necessarily
disabled.
jpeg:block-smoothing={true|false}
Enables or disables block smoothing when reading a JPEG file (default
enabled).
jpeg:dct-method=<value>
Selects the IJG JPEG library DCT implementation to use. The encoding
implementations vary in speed and encoding error. The available choices for
value are islow, ifast, float, default and fastest. Note that fastest might
not necessarily be fastest on your CPU, depending on the choices made when
the JPEG library was built and how your CPU behaves.
jpeg:fancy-upsampling={true|false}
Enables or disables fancy upsampling when reading a JPEG file (default
enabled).
jpeg:data-precision=<value>
Selects the JPEG sample storage size. Normal JPEG uses 8. Turbo-jpeg and
some variants of IJG JPEG also support 12 and 16 bits.
jpeg:lossless-precision=<value>
Selects a degree of precision to use while performing DPCM-based compression.
The available range 0 to precision-1. For example, if the output depth is
16, then the available range is 0 to 15. When the precision is non-zero,
then the pixels are right-shifted to effectively support fewer bits (fewer
colors), but offering an improved compression ratio. Use a value of 0 to
achieve lossless compression.
jpeg:lossless-predictor=<value>
Selects the predictor to use for lossless compression. The supported values
are in the range of 1 to 7 and select a pre-defined predictor algorithm to
use, which considers surrounding pixels. The best predictor for a particular
image depends on the image.
jpeg:max-scan-number=<value>
Specifies an integer value for the maximum number of progressive scans
allowed in a JPEG file. The default maximum is 100 scans. This limit is
imposed due to a weakness in the JPEG standard which allows small JPEG files
to take many minutes or hours to be read.
jpeg:max-warnings=<value>
Specifies an integer value for how many warnings are allowed for any given
error type before being promoted to a hard error. JPEG files producing
excessive warnings indicate a problem with the file.
jpeg:optimize-coding={true|false}
Selects if huffman encoding should be used. Huffman encoding is enabled by
default, but may be disabled for very large images since it encoding requires
that the entire image be buffered in memory. Huffman encoding produces
smaller JPEG files at the expense of added compression time and memory
consumption.
jpeg:preserve-settings
If the jpeg:preserve-settings flag is defined, the JPEG encoder will use the
same "quality" and "sampling-factor" settings that were found in the input
file, if the input was in JPEG format. These settings are also preserved if
the input is a JPEG file and the output is a JNG file. If the colorspace of
the output file differs from that of the input file, the quality setting is
preserved but the sampling-factors are not.
pcl:fit-to-page
If the pcl:fit-to-page flag is defined, then the printer is requested to
scale the image to fit the page size (width and/or height).
png:chunk-malloc-max=<value>
png:chunk-malloc-max specifies the maximum chunk size that libpng will be
allowed to read. Libpng's default is normally 8,000,000 bytes. Very rarely,
a valid PNG file may be encountered where the error is reported "chunk data
is too large". In this case, the limit may be increased using this option.
Take care when increasing this limit since an excessively large limit could
allow untrusted files to use excessive memory.
mng:maximum-loops=<value>
mng:maximum-loops specifies the maximum number of loops allowed to be
specified by a MNG LOOP chunk. Without an imposed limit, a MNG file could
request up to 2147483647 loops, which could run for a very long time. The
current default limit is 512 loops.
pdf:use-cropbox={true|false}
If the pdf:use-cropbox flag is set to true, then Ghostscript is requested to
apply the PDF crop box.
pdf:stop-on-error={true|false}
If the pdf:stop-on-error flag is set to true, then Ghostscript is requested
to stop processing the PDF when the first error is encountered. Otherwise it
will attempt to process all requested pages.
ps:imagemask
If the ps:imagemask flag is defined, the PS3 and EPS3 coders will create
Postscript files that render bilevel images with the Postscript imagemask
operator instead of the image operator.
ptif:minimum-geometry=<geometry>
If the ptif:minimum-geometry key is defined, GraphicsMagick will use it to
determine the minimum frame size to output when writing a pyramid TIFF file
(a TIFF file containing a succession of reduced versions of the first frame).
The default minimum geometry is 32x32.
tiff:alpha={unspecified|associated|unassociated}
Specify the TIFF alpha channel type when reading or writing TIFF files,
overriding the normal value. The default alpha channel type for new files is
unspecified alpha. Existing alpha settings are preserved when converting from
one TIFF file to another. When a TIFF file uses associated alpha, the image
pixels are pre-multiplied (i.e. altered) with the alpha channel. Files with
"associated" alpha appear as if they were alpha composited on a black
background when the matte channel is disabled. If the unassociated alpha type
is selected, then the alpha channel is saved without altering the pixels.
Photoshop recognizes associated alpha as transparency information, if the
file is saved with unassociated alpha, the alpha information is loaded as an
independent channel. Note that for many years, ImageMagick and
GraphicsMagick marked TIFF files as using associated alpha, without properly
pre-multiplying the pixels.
tiff:fill-order={msb2lsb|lsb2msb}
If the tiff:fill-order key is defined, GraphicsMagick will use it to
determine the bit fill order used while writing TIFF files. The normal
default is "msb2lsb", which matches the native bit order of all modern CPUs.
The only exception to this is when Group3 or Group4 FAX compression is
requested since FAX machines send data in bit-reversed order and therefore
RFC 2301 recommends using reverse order.
tiff:group-three-options=<value>
If the tiff:group-three-options key is defined, GraphicsMagick will use it to
set the group3 options tag when writing group3-compressed TIFF. Please see
the TIFF specification for the usage of this tag. The default value is 4.
tiff:ignore-tags=<tags>
If the tiff:ignore-tags key is defined, then it is used as a list of comma-
delimited integer TIFF tag values to ignore while reading the TIFF file.
This is useful in order to be able to read files which which otherwise fail
to read due to problems with TIFF tags. Note that some TIFF tags are
required in order to be able to read the image data at all.
tiff:photometric={minisblack|miniswhite}
For grayscale and bilevel images, GraphicsMagick normally chooses the
photometric based on bit depth and compression. If the tiff:photometric key
is defined, GraphicsMagick will use it to determine the photometric used
while writing grayscale and bilevel images. Normally bilevel images are
miniswhite and grayscale images are minisblack.
tiff:report-warnings={false|true}
If the tiff:report-warnings key is defined and set to true, then TIFF
warnings are reported as a warning exception rather than as a coder log
message. Such warnings are reported after the image has been read or
written. Most TIFF warnings are benign but sometimes they may help deduce
problems with the TIFF file, or help detect that the TIFF file requires a
special application to read successfully due to the use of proprietary or
specialized extensions.
tiff:sample-format={unsigned|ieeefp}
If the tiff:sample-format key is defined, GraphicsMagick will use it to
determine the sample format used while writing TIFF files. The default is
"unsigned". Specify "ieeefp" in order to write floating-point TIFF files with
float (32-bit) or double (64-bit) values. Use the tiff:bits-per-sample define
to determine the type of floating-point value to use.
tiff:max-sample-value=<value>
If the tiff:max-sample-value key is defined, GraphicsMagick will use the
assigned value as the maximum floating point value while reading or writing
IEEE floating point TIFFs. Otherwise the maximum value is 1.0 or the value
obtained from the file's SMaxSampleValue tag (if present). The floating point
data is currently not scanned in advance to determine a best maximum sample
value so if the range is not 1.0, or the SMaxSampleValue tag is not present,
it may be necessary to (intelligently) use this parameter to properly read a
file.
tiff:min-sample-value=<value>
If the tiff:min-sample-value key is defined, GraphicsMagick will use the
assigned value as the minimum floating point value while reading or writing
IEEE floating point TIFFs. Otherwise the minimum value is 0.0 or the value
obtained from the file's SMinSampleValue tag (if present).
tiff:bits-per-sample=<value>
If the tiff:bits-per-sample key is defined, GraphicsMagick will write images
with the specified bits per sample, overriding any existing depth value.
Value may be any in the range of 1 to 32, or 64 when the default ´unsigned'
format is written, or 16/32/24/64 if IEEEFP format is written. Please note
that the baseline TIFF 6.0 specification only requires readers to handle
certain powers of two, and the values to be handled depend on the nature of
the image (e.g. colormapped, grayscale, RGB, CMYK).
tiff:samples-per-pixel=<value>
If the tiff:samples-per-pixel key is defined to a value, the TIFF coder will
write TIFF images with the defined samples per pixel, overriding any value
stored in the image. This option should not normally be used.
tiff:rows-per-strip=<value>
Allows the user to specify the number of rows per TIFF strip. Rounded up to
a multiple of 16 when using JPEG compression. Ignored when using tiles.
tiff:strip-per-page=true
Requests that the image is written in a single TIFF strip. This is normally
the default when group3 or group4 compression is requested within reasonable
limits. Requesting a single strip for large images may result in failure due
to resource consumption in the writer or reader.
tiff:tile
Enable writing tiled TIFF (rather than stripped) using the default tile size.
Tiled TIFF organizes the image as an array of smaller images (tiles) in order
to enable random access.
tiff:tile-geometry=<width>x<height>
Specify the tile size to use while writing tiled TIFF. Width and height
should be a multiple of 16. If the value is not a multiple of 16, then it
will be rounded down. Enables tiled TIFF if it has not already been enabled.
GraphicsMagick does not use tiled storage internally so tiles need to be
converted back and forth from the internal scanline-oriented storage to tile-
oriented storage. Testing with typical RGB images shows that useful square
tile size values range from 128x128 to 1024x1024. Large images which require
using a disk-based pixel cache benefit from large tile sizes while images
which fit in memory work well with smaller tile sizes.
tiff:tile-width=<width>
Specify the tile width to use while writing tiled TIFF. The tile height is
then defaulted to an appropriate size. Width should be a multiple of 16. If
the value is not a multiple of 16, then it will be rounded down. Enables
tiled TIFF if it has not already been enabled.
tiff:tile-height=<height>
Specify the tile height to use while writing tiled TIFF. The tile width is
then defaulted to an appropriate size. Height should be a multiple of 16. If
the value is not a multiple of 16, then it will be rounded down. Enables
tiled TIFF if it has not already been enabled.
tiff:webp-lossless={TRUE|FALSE}
Specify a value of TRUE to enable lossless mode while writing WebP-compressed
TIFF files. The WebP webp:lossless option may also be used. The quality
factor set by the -quality option may be used to influence the level of
effort expended while compressing.
tiff:zstd-compress-level=<value>
Specify the compression level to use while writing Zstd-compressed TIFF
files. The valid range is 1 to 22. If this define is not specified, then the
'quality' value is used such that the default quality setting of 75 is
translated to a compress level of 9 such that ´quality' has a useful range of
10-184 if used for this purpose.
webp:exact={true|false}
Preserve exact RGB values under transparent areas. Default false.
webp:lossless={true|false}
Enable lossless encoding. Also enables 'exact' mode.
webp:method={0-6}
Quality/speed trade-off.
webp:image-hint={default,graph,photo,picture}
Hint for image type.
webp:target-size=<integer>
Target size in bytes.
webp:target-psnr=<float>
Minimal distortion to try to achieve.
webp:segments={1-4}
Maximum number of segments to use.
webp:sns-strength={0-100}
Spatial Noise Shaping.
webp:filter-strength={0-100}
Filter strength.
webp:filter-sharpness={0-7}
Filter sharpness.
webp:filter-type={0,1}
Filtering type. 0 = simple, 1 = strong (only used if filter-strength > 0 or
autofilter is enabled).
webp:auto-filter={true|false}
Auto adjust filter's strength.
webp:alpha-compression=<integer>
Algorithm for encoding the alpha plane (0 = none, 1 = compressed with WebP
lossless). Default is 1.
webp:alpha-filtering=<integer>
Predictive filtering method for alpha plane. 0: none, 1: fast, 2: best.
Default is 1.
webp:alpha-quality={0-100}
Between 0 (smallest size) and 100 (lossless). Default is 100.
webp:pass=[1..10]
Number of entropy-analysis passes.
webp:show-compressed={true|false}
Export the compressed picture back. In-loop filtering is not applied.
webp:preprocessing=[0,1,2]
0=none, 1=segment-smooth, 2=pseudo-random dithering
webp:partitions=[0-3]
log2(number of token partitions) in [0..3]. Default is 0 for easier
progressive decoding.
webp:partition-limit={0-100}
Quality degradation allowed to fit the 512k limit on prediction modes coding
(0: no degradation, 100: maximum possible degradation).
webp:emulate-jpeg-size={true|false}
If true, compression parameters will be remapped to better match the expected
output size from JPEG compression. Generally, the output size will be similar
but the degradation will be lower.
webp:thread-level=<integer>
If non-zero, try and use multi-threaded encoding.
webp:low-memory={true|false}
If set, reduce memory usage (but increase CPU use)
webp:use-sharp-yuv={true|false}
If set, if needed, use sharp (and slow) RGB->YUV conversion
For example, to create a postscript file that will render only the black pixels of
a bilevel image, use:
gm convert bilevel.tif -define ps:imagemask eps3:stencil.ps
-delay <1/100ths of a second>
display the next image after pausing
This option is useful for regulating the animation of image sequences Delay/100
seconds must expire before the display of the next image. The default is no delay
between each showing of the image sequence. The maximum delay is 65535.
You can specify a delay range (e.g. -delay 10-500) which sets the minimum and
maximum delay.
-density <width>x<height>
horizontal and vertical resolution in pixels of the image This option specifies the
image resolution to store while encoding a raster image or the canvas resolution
while rendering (reading) vector formats such as Postscript, PDF, WMF, and SVG into
a raster image. Image resolution provides the unit of measure to apply when
rendering to an output device or raster image. The default unit of measure is in
dots per inch (DPI). The -units option may be used to select dots per centimeter
instead.
The default resolution is 72 dots per inch, which is equivalent to one point per
pixel (Macintosh and Postscript standard). Computer screens are normally 72 or 96
dots per inch while printers typically support 150, 300, 600, or 1200 dots per
inch. To determine the resolution of your display, use a ruler to measure the width
of your screen in inches, and divide by the number of horizontal pixels (1024 on a
1024x768 display). If the file format supports it, this option may be used to
update the stored image resolution. Note that Photoshop stores and obtains image
resolution from a proprietary embedded profile. If this profile is not stripped
from the image, then Photoshop will continue to treat the image using its former
resolution, ignoring the image resolution specified in the standard file header.
The density option is an attribute and does not alter the underlying raster image.
It may be used to adjust the rendered size for desktop publishing purposes by
adjusting the scale applied to the pixels. To resize the image so that it is the
same size at a different resolution, use the -resample option.
-depth <value>
depth of the image
This is the number of bits of color to preserve in the image. Any value between 1
and QuantumDepth (build option) may be specified, although 8 or 16 are the most
common values. Use this option to specify the depth of raw images whose depth is
unknown such as GRAY, RGB, or CMYK, or to change the depth of any image after it
has been read.
See the -operator option for a way (via '-operator All Depth N') to apply a depth
limit to the pixels immediately rather than setting an image attribute.
-descend
obtain image by descending window hierarchy
-despeckle
reduce the speckles within an image
-displace <horizontal scale>x<vertical scale>
shift image pixels as defined by a displacement map
With this option, composite image is used as a displacement map. Black, within the
displacement map, is a maximum positive displacement. White is a maximum negative
displacement and middle gray is neutral. The displacement is scaled to determine
the pixel shift. By default, the displacement applies in both the horizontal and
vertical directions. However, if you specify mask, composite image is the
horizontal X displacement and mask the vertical Y displacement.
-display <host:display[.screen]>
specifies the X server to contact
This option is used with convert for obtaining image or font from this X server.
See X(1).
-dispose <method>
GIF disposal method
The Disposal Method indicates the way in which the graphic is to be treated after
being displayed.
Here are the valid methods:
Undefined No disposal specified.
None Do not dispose between frames.
Background Overwrite the image area with
the background color.
Previous Overwrite the image area with
what was there prior to rendering
the image.
-dissolve <percent>
dissolve an image into another by the given percent
The opacity of the composite image is multiplied by the given percent, then it is
composited over the main image.
-dither
apply Floyd/Steinberg error diffusion to the image
The basic strategy of dithering is to trade intensity resolution for spatial
resolution by averaging the intensities of several neighboring pixels. Images
which suffer from severe contouring when reducing colors can be improved with this
option.
The -colors or -monochrome option is required for this option to take effect.
Use +dither to turn off dithering and to render PostScript without text or graphic
aliasing. Disabling dithering often (but not always) leads to decreased processing
time.
-draw <string>
annotate an image with one or more graphic primitives
Use this option to annotate an image with one or more graphic primitives. The
primitives include shapes, text, transformations, and pixel operations. The shape
primitives are
point x,y
line x0,y0 x1,y1
rectangle x0,y0 x1,y1
roundRectangle x0,y0 x1,y1 wc,hc
arc x0,y0 x1,y1 a0,a1
ellipse x0,y0 rx,ry a0,a1
circle x0,y0 x1,y1
polyline x0,y0 ... xn,yn
polygon x0,y0 ... xn,yn
Bezier x0,y0 ... xn,yn
path path specification
image operator x0,y0 w,h filename
The text primitive is
text x0,y0 string
The text gravity primitive is
gravity NorthWest, North, NorthEast, West, Center,
East, SouthWest, South, or SouthEast
The text gravity primitive only affects the placement of text and does not interact
with the other primitives. It is equivalent to using the -gravity commandline
option, except that it is limited in scope to the -draw option in which it appears.
The transformation primitives are
rotate degrees
translate dx,dy
scale sx,sy
skewX degrees
skewY degrees
The pixel operation primitives are
color x0,y0 method
matte x0,y0 method
The shape primitives are drawn in the color specified in the preceding -stroke
option. Except for the line and point primitives, they are filled with the color
specified in the preceding -fill option. For unfilled shapes, use -fill none.
Point requires a single coordinate.
Line requires a start and end coordinate.
Rectangle expects an upper left and lower right coordinate.
RoundRectangle has the upper left and lower right coordinates and the width and
height of the corners.
Circle has a center coordinate and a coordinate for the outer edge.
Use Arc to inscribe an elliptical arc within a rectangle. Arcs require a start and
end point as well as the degree of rotation (e.g. 130,30 200,100 45,90).
Use Ellipse to draw a partial ellipse centered at the given point with the x-axis
and y-axis radius and start and end of arc in degrees (e.g. 100,100 100,150 0,360).
Finally, polyline and polygon require three or more coordinates to define its
boundaries. Coordinates are integers separated by an optional comma. For example,
to define a circle centered at 100,100 that extends to 150,150 use:
-draw 'circle 100,100 150,150'
Paths (See Paths) represent an outline of an object which is defined in terms of
moveto (set a new current point), lineto (draw a straight line), curveto (draw a
curve using a cubic Bezier), arc (elliptical or circular arc) and closepath (close
the current shape by drawing a line to the last moveto) elements. Compound paths
(i.e., a path with subpaths, each consisting of a single moveto followed by one or
more line or curve operations) are possible to allow effects such as "donut holes"
in objects.
Use image to composite an image with another image. Follow the image keyword with
the composite operator, image location, image size, and filename:
-draw 'image Over 100,100 225,225 image.jpg'
You can use 0,0 for the image size, which means to use the actual dimensions found
in the image header. Otherwise, it will be scaled to the given dimensions. See
-compose for a description of the composite operators.
Use text to annotate an image with text. Follow the text coordinates with a string.
If the string has embedded spaces, enclose it in single or double quotes.
Optionally you can include the image filename, type, width, height, or other image
attribute by embedding special format character. See -comment for details.
For example,
-draw 'text 100,100 "%m:%f %wx%h"'
annotates the image with MIFF:bird.miff 512x480 for an image titled
bird.miff
and whose width is 512 and height is 480.
If the first character of string is @, the text is read
from a file titled by the remaining characters in the string. Please
note that if the string comes from an untrusted source that it should
be sanitized before use (a security risk).
Rotate rotates subsequent shape primitives and text primitives about
the origin of the main image. If the -region option precedes the
-draw option, the origin for transformations is the upper left
corner of the region.
Translate translates them.
Scale scales them.
SkewX and SkewY skew them with respect to the origin of
the main image or the region.
The transformations modify the current affine matrix, which is initialized
from the initial affine matrix defined by the -affine option.
Transformations are cumulative within the -draw option.
The initial affine matrix is not affected; that matrix is only changed by the
appearance of another -affine option. If another -draw
option appears, the current affine matrix is reinitialized from
the initial affine matrix.
Use color to change the color of a pixel to the fill color (see
-fill). Follow the pixel coordinate
with a method:
point
replace
floodfill
filltoborder
reset
Consider the target pixel as that specified by your coordinate. The point method
recolors the target pixel. The replace method recolors any pixel that matches the
color of the target pixel. Floodfill recolors any pixel that matches the color of
the target pixel and is a neighbor, whereas filltoborder recolors any neighbor
pixel that is not the border color. Finally, reset recolors all pixels.
Use matte to the change the pixel matte value to transparent. Follow the pixel
coordinate with a method (see the color primitive for a description of methods).
The point method changes the matte value of the target pixel. The replace method
changes the matte value of any pixel that matches the color of the target pixel.
Floodfill changes the matte value of any pixel that matches the color of the target
pixel and is a neighbor, whereas filltoborder changes the matte value of any
neighbor pixel that is not the border color (-bordercolor). Finally reset changes
the matte value of all pixels.
You can set the primitive color, font, and font bounding box color with -fill,
-font, and -box respectively. Options are processed in command line order so be
sure to use these options before the -draw option.
-edge <radius>
detect edges within an image
-emboss <radius>
emboss an image
-encoding <type>
specify the text encoding
Choose from AdobeCustom, AdobeExpert, AdobeStandard, AppleRoman, BIG5, GB2312,
Latin 2, None, SJIScode, Symbol, Unicode, Wansung.
-endian <type>
specify endianness (MSB, LSB, or Native) of image
MSB indicates big-endian (e.g. SPARC, Motorola 68K) while LSB indicates little-
endian (e.g. Intel 'x86, VAX) byte ordering. Native indicates to use the normal
ordering for the current CPU. This option currently only influences the CMYK, DPX,
GRAY, RGB, and TIFF, formats.
Use +endian to revert to unspecified endianness.
-enhance
apply a digital filter to enhance a noisy image
-equalize
perform histogram equalization to the image
-extent <width>x<height>{+-}<x>{+-}<y>
composite image on background color canvas image
This option composites the image on a new background color (-background) canvas
image of size <width>x<height>. The existing image content is composited at the
position specified by geometry x and y offset and/or desired gravity (-gravity)
using the current image compose (-compose) method. Image content which falls
outside the bounds of the new image dimensions is discarded.
For example, this command creates a thumbnail of an image, and centers it on a red
color backdrop image, offsetting the canvas ten pixels to the left and five pixels
up, with respect to the thumbnail:
gm convert infile.jpg -thumbnail 120x80 -background red -gravity center \
-extent 140x100-10-5 outfile.jpg
This command reduces or expands a JPEG image to fit on an 800x600 display:
gm convert -size 800x600 input.jpg \
-resize 800x600 -background black \
-compose Copy -gravity center \
-extent 800x600 \
-quality 92 output.jpg
If the aspect ratio of the input image isn't exactly 4:3, then the image is
centered on an 800x600 black canvas.
-file <filename>
write annotated difference image to file
If -file is specified, then an annotated difference image is generated and written
to the specified file. Pixels which differ between the reference and compare images
are modified from those in the compare image so that the changed pixels become more
obvious. Some images may require use of an alternative highlight style (see
-highlight-style) or highlight color (see -highlight-color) before the changes are
obvious.
-fill <color>
color to use when filling a graphic primitive
Colors are represented in GraphicsMagick in the same form used by SVG. Use "gm
convert -list color" to list named colors:
name (named color)
#RGB (hex numbers, 4 bits each)
#RRGGBB (8 bits each)
#RRRGGGBBB (12 bits each)
#RRRRGGGGBBBB (16 bits each)
#RGBA (4 bits each)
#RRGGBBAA (8 bits each)
#RRRGGGBBBAAA (12 bits each)
#RRRRGGGGBBBBAAAA (16 bits each)
rgb(r,g,b) (r,g,b are decimal numbers)
rgba(r,g,b,a) (r,g,b,a are decimal numbers)
Enclose the color specification in quotation marks to prevent the "#" or the
parentheses from being interpreted by your shell.
For example,
gm convert -fill blue ...
gm convert -fill "#ddddff" ...
gm convert -fill "rgb(65000,65000,65535)" ...
The shorter forms are scaled up, if necessary by replication. For example, #3af,
#33aaff, and #3333aaaaffff are all equivalent.
See -draw for further details.
-filter <type>
use this type of filter when resizing an image
Use this option to affect the resizing operation of an image (see -geometry).
Choose from these filters (ordered by approximate increasing CPU time):
Point
Box
Triangle
Hermite
Hanning
Hamming
Blackman
Gaussian
Quadratic
Cubic
Catrom
Mitchell
Lanczos
Bessel
Sinc
The default filter is automatically selected to provide the best quality while
consuming a reasonable amount of time. The Mitchell filter is used if the image
supports a palette, supports a matte channel, or is being enlarged, otherwise the
Lanczos filter is used.
-flatten
flatten a sequence of images
In some file formats (e.g. Photoshop's PSD) complex images may be represented by
"layers" (independent images) which must be composited in order to obtain the final
rendition. The -flatten option accomplishes this composition. The sequence of
images is replaced by a single image created by compositing each image in turn,
while respecting composition operators and page offsets. While -flatten is
immediately useful for eliminating layers, it is also useful as a general-purpose
composition tool.
The sequence of images is terminated by the appearance of any option. If the
-flatten option appears after all of the input images, all images are flattened.
Also see -mosaic which is similar to -flatten except that it adds a suitably-sized
canvas base image.
For example, this composites an image on top of a 640x400 transparent black canvas
image:
gm convert -size 640x300 xc:transparent \
-compose over -page +0-100 \
frame.png -flatten output.png
and this flattens a Photoshop PSD file:
gm convert input.psd -flatten output.png
-flip create a "mirror image"
reflect the scanlines in the vertical direction.
-flop create a "mirror image"
reflect the scanlines in the horizontal direction.
-font <name>
use this font when annotating the image with text
You can tag a font to specify whether it is a PostScript, TrueType, or X11 font.
For example, Arial.ttf is a TrueType font, ps:helvetica is PostScript, and x:fixed
is X11.
-foreground <color>
define the foreground color
The color is specified using the format described under the -fill option.
-format <type>
the image format type
When used with the mogrify utility, this option will convert any image to the image
format you specify. See GraphicsMagick(1) for a list of image format types
supported by GraphicsMagick, or see the output of 'gm -list format'.
By default the file is written to its original name. However, if the filename
extension matches a supported format, the extension is replaced with the image
format type specified with -format. For example, if you specify tiff as the format
type and the input image filename is image.gif, the output image filename becomes
image.tiff.
-format <string>
output formatted image characteristics
When used with the identify utility, or the convert utility with output written to
the 'info:-' file specification, use this option to print information about the
image in a format of your choosing. You can include the image filename, type,
width, height, Exif data, or other image attributes by embedding special format
characters:
%b file size
%c comment
%d directory
%e filename extension
%f filename
%g page dimensions and offsets
%h height
%i input filename
%k number of unique colors
%l label
%m magick
%n number of scenes
%o output filename
%p page number
%q image bit depth
%r image type description
%s scene number
%t top of filename
%u unique temporary filename
%w width
%x horizontal resolution
%y vertical resolution
%A transparency supported
%C compression type
%D GIF disposal method
%G Original width and height
%H page height
%M original filename specification
%O page offset (x,y)
%P page dimensions (width,height)
%Q compression quality
%T time delay (in centi-seconds)
%U resolution units
%W page width
%X page horizontal offset (x)
%Y page vertical offset (y)
%@ trim bounding box
%# signature
\n newline
\r carriage return
%% %
For example,
-format "%m:%f %wx%h"
displays MIFF:bird.miff 512x480 for an image titled bird.miff and whose width is
512 and height is 480.
If the first character of string is @, the format is read from a file titled by the
remaining characters in the string. Please note that if the string comes from an
untrusted source that it should be sanitized before use since this may be used to
incorporate any readable file on the system (a security risk).
The values of image type (%r) which may be returned include:
Bilevel
Grayscale
GrayscaleMatte
Palette
PaletteMatte
TrueColor
TrueColorMatte
ColorSeparation
ColorSeparationMatte
Optimize
You can also use the following special formatting syntax to print Exif information
contained in the file:
%[EXIF:<tag>]
Where "<tag>" may be one of the following:
* (print all Exif tags, in keyword=data format)
! (print all Exif tags, in tag_number format)
#hhhh (print data for Exif tag #hhhh)
ImageWidth
ImageLength
BitsPerSample
Compression
PhotometricInterpretation
FillOrder
DocumentName
ImageDescription
Make
Model
StripOffsets
Orientation
SamplesPerPixel
RowsPerStrip
StripByteCounts
XResolution
YResolution
PlanarConfiguration
ResolutionUnit
TransferFunction
Software
DateTime
Artist
WhitePoint
PrimaryChromaticities
TransferRange
JPEGProc
JPEGInterchangeFormat
JPEGInterchangeFormatLength
YCbCrCoefficients
YCbCrSubSampling
YCbCrPositioning
ReferenceBlackWhite
CFARepeatPatternDim
CFAPattern
BatteryLevel
Copyright
ExposureTime
FNumber
IPTC/NAA
ExifOffset
InterColorProfile
ExposureProgram
SpectralSensitivity
GPSInfo
ISOSpeedRatings
OECF
ExifVersion
DateTimeOriginal
DateTimeDigitized
ComponentsConfiguration
CompressedBitsPerPixel
ShutterSpeedValue
ApertureValue
BrightnessValue
ExposureBiasValue
MaxApertureValue
SubjectDistance
MeteringMode
LightSource
Flash
FocalLength
MakerNote
UserComment
SubSecTime
SubSecTimeOriginal
SubSecTimeDigitized
FlashPixVersion
ColorSpace
ExifImageWidth
ExifImageLength
InteroperabilityOffset
FlashEnergy
SpatialFrequencyResponse
FocalPlaneXResolution
FocalPlaneYResolution
FocalPlaneResolutionUnit
SubjectLocation
ExposureIndex
SensingMethod
FileSource
SceneType
JPEG specific information (from reading a JPEG file) may be obtained like this:
%[JPEG-<tag>]
Where "<tag>" may be one of the following:
* (all JPEG-related tags, in
keyword=data format)
Quality IJG JPEG "quality" estimate
Colorspace JPEG colorspace numeric ID
Colorspace-Name JPEG colorspace name
Sampling-factors JPEG sampling factors
Please note that JPEG has no notion of "quality" and that the quality metric used
by, and estimated by the software is based on the quality metric established by IJG
JPEG 6b. Other encoders (e.g. that used by Adobe Photoshop) use different encoding
metrics.
Surround the format specification with quotation marks to prevent your shell from
misinterpreting any spaces and square brackets.
-frame <width>x<height>+<outer bevel width>+<inner bevel width>
surround the image with an ornamental border
See -geometry for details about the geometry specification. The -frame option is
not affected by the -gravity option.
The color of the border is specified with the -mattecolor command line option.
-frame include the X window frame in the imported image
-fuzz <distance>{%}
colors within this Euclidean distance are considered equal
A number of algorithms search for a target color. By default the color must be
exact. Use this option to match colors that are close (in Euclidean distance) to
the target color in RGB 3D space. For example, if you want to automatically trim
the edges of an image with -trim but the image was scanned and the target
background color may differ by a small amount. This option can account for these
differences.
The distance can be in absolute intensity units or, by appending "%", as a
percentage of the maximum possible intensity (255, 65535, or 4294967295).
-gamma <value>
level of gamma correction
The same color image displayed on two different workstations may look different due
to differences in the display monitor. Use gamma correction to adjust for this
color difference. Reasonable values extend from 0.8 to 2.3. Gamma less than 1.0
darkens the image and gamma greater than 1.0 lightens it. Large adjustments to
image gamma may result in the loss of some image information if the pixel quantum
size is only eight bits (quantum range 0 to 255).
You can apply separate gamma values to the red, green, and blue channels of the
image with a gamma value list delimited with slashes (e.g., 1.7/2.3/1.2).
Use +gamma value to set the image gamma level without actually adjusting the image
pixels. This option is useful if the image is of a known gamma but not set as an
image attribute (e.g. PNG images).
-gaussian <radius>{x<sigma>}
blur the image with a Gaussian operator
Use the given radius and standard deviation (sigma).
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
The -geometry option is used for a number of different purposes, depending on the
utility it is used with.
For the X11 commands ('animate', 'display', and 'import'), it specifies the
preferred size and location of the Image window. By default, the window size is
the image size and the location is chosen by you (or your window manager) when it
is mapped.
For the 'import', 'convert', 'mogrify' utility commands it may be used to specify
the desired size when resizing an image. In this case, symbols representing resize
options may be appended to the geometry string to influence how the resize request
is treated.
See later notes corresponding to usage by particular commands. The following notes
apply to when -geometry is used to express a resize request, taking into account
the current properties of the image.
By default, the width and height are maximum values. That is, the image is expanded
or contracted to fit the width and height value while maintaining the aspect ratio
of the image.
Append a ^ to the geometry so that the image aspect ratio is maintained when the
image is resized, but the resulting width or height are treated as minimum values
rather than maximum values.
Append a ! (exclamation point) to the geometry to force the image size to exactly
the size you specify. For example, if you specify 640x480! the image width is set
to 640 pixels and height to 480.
If only the width is specified, without the trailing 'x', then height is set to
width (e.g., -geometry 100 is the same as -geometry 100x100). If only the width is
specified but with the trailing 'x', then width assumes the value and the height is
chosen to maintain the aspect ratio of the image. Similarly, if only the height is
specified prefixed by 'x' (e.g., -geometry x256), the width is chosen to maintain
the aspect ratio.
To specify a percentage width or height instead, append %. The image size is
multiplied by the width and height percentages to obtain the final image
dimensions. To increase the size of an image, use a value greater than 100 (e.g.
125%). To decrease an image's size, use a percentage less than 100.
Use @ to specify the maximum area in pixels of an image.
Use > to change the dimensions of the image only if its width or height exceeds the
geometry specification. < resizes the image only if both of its dimensions are less
than the geometry specification. For example, if you specify '640x480>' and the
image size is 256x256, the image size does not change. However, if the image is
512x512 or 1024x1024, it is resized to 480x480. Enclose the geometry specification
in quotation marks to prevent the < or > from being interpreted by your shell as a
file redirection.
When used with animate and display, offsets are handled in the same manner as in
X(1) and the -gravity option is not used. If the x is negative, the offset is
measured leftward from the right edge of the screen to the right edge of the image
being displayed. Similarly, negative y is measured between the bottom edges. The
offsets are not affected by "%"; they are always measured in pixels.
When used as a composite option, -geometry gives the dimensions of the image and
its location with respect to the composite image. If the -gravity option is
present with NorthEast, East, or SouthEast gravity, the x represents the distance
from the right edge of the image to the right edge of the composite image.
Similarly, if the -gravity option is present with SouthWest, South, or SouthEast
gravity, y is measured between the bottom edges. Accordingly, a positive offset
will never point in the direction outside of the image. The offsets are not
affected by "%"; they are always measured in pixels. To specify the dimensions of
the composite image, use the -resize option.
When used as a convert, import or mogrify option, -geometry is synonymous with
-resize and specifies the size of the output image. The offsets, if present, are
ignored.
When used as a montage option, -geometry specifies the image size and border size
for each tile; default is 256x256+0+0. Negative offsets (border dimensions) are
meaningless. The -gravity option affects the placement of the image within the
tile; the default gravity for this purpose is Center. If the "%" sign appears in
the geometry specification, the tile size is the specified percentage of the
original dimensions of the first tile. To specify the dimensions of the montage,
use the -resize option.
-gravity <type>
direction primitive gravitates to when annotating the image.
Choices are: NorthWest, North, NorthEast, West, Center, East, SouthWest, South,
SouthEast.
The direction you choose specifies where to position the text when annotating the
image. For example Center gravity forces the text to be centered within the image.
By default, the image gravity is NorthWest. See -draw for more details about
graphic primitives. Only the text primitive is affected by the -gravity option.
The -gravity option is also used in concert with the -geometry option and other
options that take <geometry> as a parameter, such as the -crop option. See
-geometry for details of how the -gravity option interacts with the <x> and <y>
parameters of a geometry specification.
When used as an option to composite, -gravity gives the direction that the image
gravitates within the composite.
When used as an option to montage, -gravity gives the direction that an image
gravitates within a tile. The default gravity is Center for this purpose.
-green-primary <x>,<y>
green chromaticity primary point
-hald-clut <clut>
apply a Hald CLUT to the image
A Hald CLUT ("Color Look-Up Table") is a special square color image which contains
a look-up table for red, green, and blue. The size of the Hald CLUT image is
determined by its order. The width (and height) of a Hald CLUT is the cube of the
order. For example, a Hald CLUT of order 8 is 512x512 pixels (262,144 colors) and
of order 16 is 4096x4096 (16,777,216 colors). A special CLUT is the identity CLUT
which which causes no change to the input image. In order to use the Hald CLUT,
one takes an identity CLUT and adjusts its colors in some way. The modified CLUT
can then be used to transform any number of images in an identical way.
GraphicsMagick contains a built-in identity CLUT generator via the IDENTITY coder.
For example reading from the file name IDENTITY:8 returns an identity CLUT of order
8. Typical Hald CLUT identity images have an order of between 8 and 16. The
default order for the IDENTITY CLUT generator is 8. Interpolation is used so it is
not usually necessary for CLUT images to be very large. The PNG file format is
ideal for storing Hald CLUT images because it compresses them very well.
-help print usage instructions
-highlight-color <color>
pixel annotation color
Specifies the color to use when annotating difference pixels.
-highlight-style <style>
pixel annotation style
Specifies the pixel difference annotation style used to draw attention to changed
pixels. May be one of Assign, Threshold, Tint, or XOR; where Assign replaces the
pixel with the highlight color (see -highlight-color), Threshold replaces the pixel
with black or white based on the difference in intensity, Tint alpha tints the
pixel with the highlight color, and XOR does an XOR between the pixel and the
highlight color.
-iconGeometry <geometry>
specify the icon geometry
Offsets, if present in the geometry specification, are handled in the same manner
as the -geometry option, using X11 style to handle negative offsets.
-iconic
iconic animation
-immutable
make image immutable
-implode <factor>
implode image pixels about the center
-intent <type>
use this type of rendering intent when managing the image color
Use this option to affect the the color management operation of an image (see
-profile). Choose from these intents: Absolute, Perceptual, Relative, Saturation.
The default intent is undefined.
-interlace <type>
the type of interlacing scheme
Choices are: None, Line, Plane, or Partition. The default is None.
This option is used to specify the type of interlacing scheme for raw image formats
such as RGB or YUV. None means do not interlace (RGBRGBRGBRGBRGBRGB...),
Line uses scanline interlacing (RRR...GGG...BBB...RRR...GGG...BBB...), and Plane
uses plane interlacing (RRRRRR...GGGGGG...BBBBBB...).
Partition is like plane except the different planes are saved to individual files
(e.g. image.R, image.G, and image.B).
Use Line to create an interlaced PNG or GIF or progressive JPEG image.
-label <name>
assign a label to an image
Use this option to assign a specific label to the image, when writing to an image
format that supports labels, such as TIFF, PNG, MIFF, or PostScript. You can
include the the image filename, type, width, height, or other image attribute by
embedding special format character. A label is not drawn on the image, but is
embedded in the image datastream via a "Label" tag or similar mechanism. If you
want the label to be visible on the image itself, use the -draw option. See
-comment for details.
For example,
-label "%m:%f %wx%h"
produces an image label of MIFF:bird.miff 512x480 for an image titled bird.miff and
whose width is 512 and height is 480.
If the first character of string is @, the image label is read from a file titled
by the remaining characters in the string. Please note that if the string comes
from an untrusted source that it should be sanitized before use since otherwise the
content of an arbitrary readable file might be incorporated into the image label (a
security risk).
If the -label option appears multiple times, only the last label is stored.
In PNG images, the label is stored in a tEXt or zTXt chunk with the keyword
"label".
When converting to PostScript, use this option to specify a header string to print
above the image. Specify the label font with -font.
When creating a montage, by default the label associated with an image is displayed
with the corresponding tile in the montage. Use the +label option to suppress this
behavior.
-lat <width>x<height>{+-}<offset>{%}
perform local adaptive thresholding
Perform local adaptive thresholding using the specified width, height, and offset.
The offset is a distance in sample space from the mean, as an absolute integer
ranging from 0 to the maximum sample value or as a percentage. If the percent
option is supplied, then the offset is computed as a percentage of the quantum
range. It is strongly recommended to use the percent option so that results are
not sensitive to pixel quantum depth.
For example,
-colorspace gray -lat "10x10-5%"
will help clarify a scanned grayscale or color document, producing a bi-level
equivalent.
-level <black_point>{,<gamma>}{,<white_point>}{%}
adjust the level of image contrast
Give one, two or three values delimited with commas: black-point, gamma, white-
point (e.g. 10,1.0,250 or 2%,0.5,98%). The black and white points range from 0 to
MaxRGB or from 0 to 100%; if the white point is omitted it is set to MaxRGB-
black_point. If a "%" sign is present anywhere in the string, the black and white
points are percentages of MaxRGB. Gamma is an exponent that ranges from 0.1 to 10.;
if it is omitted, the default of 1.0 (no gamma correction) is assumed. This
interface works similar to Photoshop's "Image->Adjustments->Levels..." "Input
Levels" interface.
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
By default, resource limits are estimated based on the available resources and
capabilities of the system. The resource limits are Disk, maximum total disk space
consumed; File, maximum number of file descriptors allowed to be open at once; Map,
maximum total number of file bytes which may be memory mapped; Memory, maximum
total number of bytes of heap memory used for image storage; Pixels, maximum
absolute image size (per image); Width, maximum image pixels width; Height, maximum
image pixels height; Read, maximum number of uncompressed bytes to read; Write
maximum number of uncompressed bytes to write; and Threads, the maximum number of
worker threads to use per OpenMP thread team.
The Disk and Map resource limits are used to decide if (for a given image) the
decoded image ("pixel cache") should be stored in heap memory (RAM), in a memory-
mapped disk file, or in a disk file accessed via read/write I/O.
The number of total pixels in one image (Pixels), and/or the width/height
(Width/Height), may be limited in order to force the reading, or creation of images
larger than the limit (in pixels) to intentionally fail. The disk limit (Disk)
establishes an overall limit since using the disk is the means of last resort. When
the disk limit has been reached, no more images may be read.
The amount of uncompressed data read when reading one image file may be limited by
the Read limit. Reading the image fails when the limit is hit. This option is
useful if the data is read from a stream (pipe) or from a compressed file such as a
gzipped file. Some files are very compressible and so a small compressed file can
decompress to a huge amount of data. This option also defends against files which
produce seemingly endless loops while decoding by seeking backwards in the file.
The amount of uncompressed data written when writing one image file may be limited
by the Write limit. Writing the image fails (similar to disk full) when the limit
is hit. If the output is to an ordinary file (rather than pipe) then any truncated
output file is removed. This option may be used to assure that unexpectedly large
files are not written. This option may also be used to simulate what will happen
if the disk is full.
The value argument is an absolute value, but may have standard binary suffix
characters applied ('K', 'M', 'G', 'T', 'P', 'E') to apply a scaling to the value
(based on a multiplier of 1024). Any additional characters are ignored. For
example, '-limit Pixels 10MP' limits the maximum image size to 10 megapixels and
'-limit memory 32MB -limit map 64MB' limits memory and memory mapped files to 32
megabytes and 64 megabytes respectively.
Resource limits may also be set using environment variables. The environment
variables MAGICK_LIMIT_DISK, MAGICK_LIMIT_FILES, MAGICK_LIMIT_MAP,
MAGICK_LIMIT_MEMORY, MAGICK_LIMIT_PIXELS, MAGICK_LIMIT_WIDTH, MAGICK_LIMIT_HEIGHT.
MAGICK_LIMIT_READ, MAGICK_LIMIT_WRITE, and OMP_NUM_THREADS may be used to set the
limits for disk space, open files, memory mapped size, heap memory, per-image
pixels, image width, image height, bytes read from a file, bytes written to a file,
and OpenMP threads respectively.
Use the option -list resource list the current limits.
-linewidth
the line width for subsequent draw operations
-list <type>
the type of list
Choices are: Color, Delegate, Format, Magic, Module, Resource, or Type. The Module
option is only available if GraphicsMagick was built to support loadable modules.
This option lists information about the GraphicsMagick configuration.
-log <string>
Specify format for debug log
This option specifies the format for the log printed when the -debug option is
active.
You can display the following components by embedding special format characters:
%d domain
%e event
%f function
%l line
%m module
%p process ID
%r real CPU time
%t wall clock time
%u user CPU time
%% percent sign
\n newline
\r carriage return
For example:
gm convert -debug coders -log "%u %m:%l %e" in.gif out.png
The default behavior is to print all of the components.
-loop <iterations>
add Netscape loop extension to your GIF animation
A value other than zero forces the animation to repeat itself up to iterations
times.
-magnify
magnify the image
The image size is doubled using linear interpolation.
-magnify <factor>
magnify the image
The displayed image is magnified by factor.
-map <filename>
choose a particular set of colors from this image
[convert or mogrify]
By default, color reduction chooses an optimal set of colors that best represent
the original image. Alternatively, you can choose a particular set of colors from
an image file with this option.
Use +map to reduce all images in the image sequence that follows to a single
optimal set of colors that best represent all the images. The sequence of images
is terminated by the appearance of any option. If the +map option appears after
all of the input images, all images are mapped.
-map <type>
display image using this type.
[animate or display]
Choose from these Standard Colormap types:
best
default
gray
red
green
blue
The X server must support the Standard Colormap you choose, otherwise an error
occurs. Use list as the type and display searches the list of colormap types in
top-to-bottom order until one is located. See xstdcmap(1) for one way of creating
Standard Colormaps.
-mask <filename>
Specify a clipping mask
The image read from the file is used as a clipping mask. It must have the same
dimensions as the image being masked.
If the mask image contains an opacity channel, the opacity of each pixel is used to
define the mask. Otherwise, the intensity (gray level) of each pixel is used.
Unmasked (black) pixels are modified while masked pixels (not black) are protected
from alteration.
Use +mask to remove the clipping mask.
It is not necessary to use -clip to activate the mask; -clip is implied by -mask.
-matte store matte channel if the image has one
If the image does not have a matte channel, create an opaque one.
Use +matte to ignore the matte channel (treats it as opaque) and to avoid writing a
matte channel in the output file.
For the compare command, -matte will add an opaque matte channel to images if they
do not already have a matte channel, and matte will be enabled for both images.
Likewise, if +matte is used, the matte channel is disabled for both images. This
makes it easier to compare images regardless of if they already have a matte
channel.
-mattecolor <color>
specify the color to be used with the -frame option
The color is specified using the format described under the -fill option.
-maximum-error <limit>
specifies the maximum amount of total image error
Specifies the maximum amount of total image error (based on comparison using a
specified metric) before an error ("image difference exceeds limit") is reported.
The error is reported via a non-zero command execution return status.
-median <radius>
apply a median filter to the image
-metric <metric>
comparison metric (MAE, MSE, PAE, PSNR, RMSE)
-minify <factor>
minify the image
The image size is halved using linear interpolation.
-mode <value>
mode of operation
The available montage modes are frame to place the images in a rectangular grid
while adding a decorative frame with dropshadow, unframe to place undecorated
images in a rectangular grid, and concatenate to pack the images closely together
without any well-defined grid or decoration.
-modulate brightness[,saturation[,hue]]
vary the brightness, saturation, and hue of an image
Specify the percent change in brightness, color saturation, and hue separated by
commas. Default argument values are 100 percent, resulting in no change. For
example, to increase the color brightness by 20% and decrease the color saturation
by 10% and leave the hue unchanged, use: -modulate 120,90.
Hue is the percentage of absolute rotation from the current position. For example
50 results in a counter-clockwise rotation of 90 degrees, 150 results in a
clockwise rotation of 90 degrees, with 0 and 200 both resulting in a rotation of
180 degrees.
-monitor
show progress indication
A simple command-line progress indication is shown while the command is running.
The process indication shows the operation currently being performed and the
percent completed. Commands using X11 may replace the command line progress
indication with a graphical one once an image has been displayed.
-monochrome
transform the image to black and white
-morph <frames>
morphs an image sequence
Both the image pixels and size are linearly interpolated to give the appearance of
a meta-morphosis from one image to the next.
The sequence of images is terminated by the appearance of any option. If the
-morph option appears after all of the input images, all images are morphed.
-mosaic
create a mosaic from an image or an image sequence
The -mosaic option provides a flexible way to composite one or more images onto a
solid-color canvas image. It works similar to -flatten except that a base canvas
image is automatically created with a suitable size given the image size, page
dimensions, and page offsets of images to be composited. The color of the base
canvas image may be set via the -background option. The default canvas color is
'white', but 'black' or 'transparent' may be more suitable depending on the
composition algorithm requested.
The -compose option may be used to specify the composition algorithm to use when
compositing the subsequent image on the base canvas.
The -page option can be used to establish the dimensions of the mosaic and to
position the subsequent image within the mosaic. If the -page argument does not
specify width and height, then the canvas dimensions are evaluated based on the
image sizes and offsets.
The sequence of images is terminated by the appearance of any option. If the
-mosaic option appears after all of the input images, all images are included in
the mosaic.
The following is an example of composing an image based on red, green, and blue
layers extracted from a sequence of images and pasted on the canvas image at
specified offsets:
gm convert -background black \
-compose CopyRed -page +0-100 red.png \
-compose CopyGreen -page +0+40 green.png \
-compose CopyBlue -page +0+180 blue.png \
-mosaic output.png
-motion-blur <radius>{x<sigma>}{+angle}
Simulate motion blur
Simulate motion blur by convolving the image with a Gaussian operator of the given
radius and standard deviation (sigma). For reasonable results, radius should be
larger than sigma. If radius is zero, then a suitable radius is automatically
selected based on sigma. The angle specifies the angle that the object is coming
from (side which is blurred).
-name name an image
-negate
replace every pixel with its complementary color
The red, green, and blue intensities of an image are negated. White becomes black,
yellow becomes blue, etc. Use +negate to only negate the grayscale pixels of the
image.
-noise <radius|type>
add or reduce noise in an image
The principal function of noise peak elimination filter is to smooth the objects
within an image without losing edge information and without creating undesired
structures. The central idea of the algorithm is to replace a pixel with its next
neighbor in value within a pixel window, if this pixel has been found to be noise.
A pixel is defined as noise if and only if this pixel is a maximum or minimum
within the pixel window.
Use radius to specify the width of the neighborhood.
Use +noise followed by a noise type to add noise to an image. The noise added
modulates the existing image pixels. Choose from these noise types:
Uniform
Gaussian
Multiplicative
Impulse
Laplacian
Poisson
Random (uniform distribution)
-noop NOOP (no option)
The -noop option can be used to terminate a group of images and reset all options
to their default values, when no other option is desired.
-normalize
transform image to span the full range of color values
This is a contrast enhancement technique based on the image histogram.
When computing the contrast enhancement values, the histogram edges are truncated
so that the majority of the image pixels are considered in the contrast
enhancement, and outliers (e.g. random noise or minute details) are ignored. The
default is that 0.1 percent of the histogram entries are ignored. The percentage
of the histogram to ignore may be specified by using the -set option with the
histogram-threshold parameter similar to -set histogram-threshold 0.01 to specify
0.01 percent. Use 0 percent to use the entire histogram, with possibly diminished
contrast enhancement.
-opaque <color>
change this color to the pen color within the image
The color is specified using the format described under the -fill option. The
color is replaced if it is identical to the target color, or close enough to the
target color in a 3D space as defined by the Euclidean distance specified by -fuzz.
See -fill and -fuzz for more details.
-operator channel operator rvalue[%]
apply a mathematical, bitwise, or value operator to an image channel
Apply a low-level mathematical, bitwise, or value operator to a selected image
channel or all image channels. Operations which result in negative results are
reset to zero, and operations which overflow the available range are reset to the
maximum possible value.
Select a channel from: Red, Green, Blue, Opacity, Matte, Cyan, Magenta, Yellow,
Black, All, or Gray. All only modifies the color channels and does not modify the
Opacity channel. Except for the threshold operators, All operates on each channel
independently so that operations are on a per-channel basis.
Gray treats the color channels as a grayscale intensity and performs the requested
operation on the equivalent pixel intensity so the result is a gray image. Select
an operator from Add, And, Assign, Depth, Divide, Gamma, Negate, LShift, Log, Max,
Min, Multiply, Or, Pow, RShift, Subtract, Threshold, Threshold-White, Threshold-
White-Negate, Threshold-Black, Threshold-Black-Negate, Xor, Noise-Gaussian, Noise-
Impulse, Noise-Laplacian, Noise-Multiplicative, Noise-Poisson, Noise-Random, and
Noise-Uniform.
Rvalue may be any floating point or integer value. Normally rvalue will be in the
range of 0 to MaxRGB, where MaxRGB is the largest quantum value supported by the
GraphicsMagick build (255, 65535, or 4294967295) but values outside this range are
useful for some arithmetic operations. Arguments to logical or bit-wise operations
are rounded to a positive integral value prior to use. If a percent (%) symbol is
appended to the argument, then the argument has a range of 0 to 100 percent.
The following is a description of the operators:
Add
Result is rvalue added to channel value.
And
Result is the logical AND of rvalue with channel value.
Assign
Result is rvalue.
Depth
Result is channel value adjusted so that it may be (approximately) stored in
the specified number of bits without additional loss.
Divide
Result is channel value divided by rvalue.
Gamma
Result is channel value gamma adjusted by rvalue.
LShift
Result is channel value bitwise left shifted by rvalue bits.
Log
Result is computed as log(value*rvalue+1)/log(rvalue+1).
Max
Result is assigned to rvalue if rvalue is greater than value.
Min
Result is assigned to rvalue if rvalue is less than value.
Multiply
Result is channel value multiplied by rvalue.
Negate
Result is inverse of channel value (like a film negative). An rvalue must be
supplied but is currently not used. Inverting the image twice results in the
original image.
Or
Result is the logical OR of rvalue with channel value.
Pow
Result is computed as pow(value,rvalue). Similar to Gamma except that rvalue
is not inverted.
RShift
Result is channel value bitwise right shifted by rvalue bits.
Subtract
Result is channel value minus rvalue.
Threshold
Result is maximum (white) if channel value is greater than rvalue, or minimum
(black) if it is less than or equal to rvalue. If all channels are specified,
then thresholding is done based on computed pixel intensity.
Threshold-white
Result is maximum (white) if channel value is greater than rvalue and is
unchanged if it is less than or equal to rvalue. This can be used to remove
apparent noise from the bright parts of an image. If all channels are
specified, then thresholding is done based on computed pixel intensity.
Threshold-White-Negate
Result is set to black if channel value is greater than rvalue and is
unchanged if it is less than or equal to rvalue. If all channels are
specified, then thresholding is done based on computed pixel intensity.
Threshold-black
Result is minimum (black) if channel value is less than than rvalue and is
unchanged if it is greater than or equal to rvalue. This can be used to
remove apparent noise from the dark parts of an image. If all channels are
specified, then thresholding is done based on computed pixel intensity.
Threshold-Black-Negate
Result is set to white if channel value is less than than rvalue and is
unchanged if it is greater than or equal to rvalue. If all channels are
specified, then thresholding is done based on computed pixel intensity.
Xor
Result is the logical XOR of rvalue with channel value. An interesting
property of XOR is that performing the same operation twice results in the
original value.
Noise-Gaussian
Result is the current channel value modulated with gaussian noise according
to the intensity specified by rvalue.
Noise-Impulse
Result is the current channel value modulated with impulse noise according to
the intensity specified by rvalue.
Noise-Laplacian
Result is the current channel value modulated with laplacian noise according
to the intensity specified by rvalue.
Noise-Multiplicative
Result is the current channel value modulated with multiplicative gaussian
noise according to the intensity specified by rvalue.
Noise-Poisson
Result is the current channel value modulated with poisson noise according to
the intensity specified by rvalue.
Noise-Random
Result is the current channel value modulated with random (uniform
distribution) noise according to the intensity specified by rvalue. The
initial noise intensity (rvalue=1.0) is the range of one pixel quantum span.
Noise-Uniform
Result is the channel value with uniform noise applied according to the
intensity specified by rvalue.
As an example, the Assign operator assigns a fixed value to a channel. For
example, this command sets the red channel to the mid-range value:
gm convert in.bmp -operator red assign "50%" out.bmp
The following applies 50% thresholding to the image and returns a gray image:
gm convert in.bmp -operator gray threshold "50%" out.bmp
-ordered-dither <channeltype> <NxN>
ordered dither the image
The channel or channels specified in the channeltype argument are reduced to
binary, using an ordered dither method. The choices for channeltype are All,
Intensity, Red, Green, Blue, Cyan, Magenta, Yellow, Black, and Opacity
When channeltype is "All", the color samples are dithered into a gray level and
then that gray level is stored in the three color channels. Separately, the
opacity channel is dithered into a bilevel opacity value which is stored in the
opacity channel.
When channeltype is "Intensity", only the color samples are dithered. When
channeltype is "opacity" or "matte", only the opacity channel is dithered. When a
color channel is specified, only that channel is dithered.
The choices for N are 2 through 7. The image is divided into NxN pixel tiles. In
each tile, some or all pixels are turned to white depending on their intensity.
For each N, (N**2)+1 levels of gray can be represented. For N == 2, 3, or 4, the
pixels are turned to white in an order that maximizes dispersion (i.e., reduces
granularity), while for N == 5, 6, and 7, they are turned to white in an order that
creates a roughly circular black blob in the middle of each tile. An attractive
"half-tone" looking image can be obtained by first rotating the image 45 degrees,
performing a 5x5 ordered-dither operation, then rotating it back to the original
orientation and cropping to the original image dimensions. If the original image
is gamma-encoded, it is advisable to convert it to linear intensity first, e.g.,
with the "-gamma 0.45455" option.
-output-directory <directory>
output files to directory
Use -output-directory to specify a directory under which to write the output files.
Normally mogrify overwrites the input files, but with this option the output files
may be written to a different directory tree so that the input files are preserved.
The algorithm used preserves all of the input path specification in the output path
so that the user-specified input path (including any sub-directory part) is
appended to the output path. If the input file lacks an extension, then a suitable
extension is automatically added to the output file. The user is responsible for
creating the output directory specified as an argument, but subdirectories will be
created as needed if the -create-directories option is supplied. This option may
be used to apply transformations on files from one directory and write the
transformed files to a different directory. In conjunction with -create-
directories, this option is designed to support transforming whole directory trees
of files provided that the relative path of the input file is included as part the
list of filenames.
-orient <orientation>
Set the image orientation attribute
Sets the image orientation attribute. The image orientation attribute is
compatible with the TIFF orientation tag (and the EXIF orientation tag). Accepted
values are undefined, TopLeft, TopRight, BottomRight, BottomLeft, LeftTop,
RightTop, RightBottom, LeftBottom, and hyphenated versions thereof (e.g. left-
bottom). Please note that GraphicsMagick does not include an EXIF editor so if an
EXIF profile is written to the output image, the value in the EXIF profile might
not match the image. It is possible for an image file to indicate its orientation
in several different ways simultaneously.
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
Use this option to specify the dimensions of the PostScript page in dots per inch
or a TEXT page in pixels. The choices for a PostScript page are:
11x17 792 1224
Ledger 1224 792
Legal 612 1008
Letter 612 792
LetterSmall 612 792
ArchE 2592 3456
ArchD 1728 2592
ArchC 1296 1728
ArchB 864 1296
ArchA 648 864
A0 2380 3368
A1 1684 2380
A2 1190 1684
A3 842 1190
A4 595 842
A4Small 595 842
A5 421 595
A6 297 421
A7 210 297
A8 148 210
A9 105 148
A10 74 105
B0 2836 4008
B1 2004 2836
B2 1418 2004
B3 1002 1418
B4 709 1002
B5 501 709
C0 2600 3677
C1 1837 2600
C2 1298 1837
C3 918 1298
C4 649 918
C5 459 649
C6 323 459
Flsa 612 936
Flse 612 936
HalfLetter 396 612
For convenience you can specify the page size by media (e.g. A4, Ledger, etc.).
Otherwise, -page behaves much like -geometry (e.g. -page letter+43+43>).
This option is also used to place subimages when writing to a multi-image format
that supports offsets, such as GIF89 and MNG. When used for this purpose the
offsets are always measured from the top left corner of the canvas and are not
affected by the -gravity option. To position a GIF or MNG image, use
-page{+-}<x>{+-}<y> (e.g. -page +100+200). When writing to a MNG file, a -page
option appearing ahead of the first image in the sequence with nonzero width and
height defines the width and height values that are written in the MHDR chunk.
Otherwise, the MNG width and height are computed from the bounding box that
contains all images in the sequence. When writing a GIF89 file, only the bounding
box method is used to determine its dimensions.
For a PostScript page, the image is sized as in -geometry and positioned relative
to the lower left hand corner of the page by {+-}<xoffset>{+-}<y offset>. Use -page
612x792>, for example, to center the image within the page. If the image size
exceeds the PostScript page, it is reduced to fit the page. The default gravity
for the -page option is NorthWest, i.e., positive x and y offset are measured
rightward and downward from the top left corner of the page, unless the -gravity
option is present with a value other than NorthWest.
The default page dimensions for a TEXT image is 612x792.
This option is used in concert with -density.
Use +page to remove the page settings for an image.
-paint <radius>
simulate an oil painting
Each pixel is replaced by the most frequent color in a circular neighborhood whose
width is specified with radius.
-pause <seconds>
pause between animation loops [animate]
Pause for the specified number of seconds before repeating the animation.
-pause <seconds>
pause between snapshots [import]
Pause for the specified number of seconds before taking the next snapshot.
-pen <color>
(This option has been replaced by the -fill option)
-ping efficiently determine image characteristics
Use this option to disable reading the image pixels so that image characteristics
such as the image dimensions may be obtained very quickly. For identify, use +ping
to force reading the image pixels so that the pixel read rate may be included in
the displayed information.
-pointsize <value>
pointsize of the PostScript, X11, or TrueType font
-preview <type>
image preview type
Use this option to affect the preview operation of an image (e.g. convert file.png
-preview Gamma Preview:gamma.png). Choose from these previews:
Rotate
Shear
Roll
Hue
Saturation
Brightness
Gamma
Spiff
Dull
Grayscale
Quantize
Despeckle
ReduceNoise
AddNoise
Sharpen
Blur
Threshold
EdgeDetect
Spread
Shade
Raise
Segment
Solarize
Swirl
Implode
Wave
OilPaint
CharcoalDrawing
JPEG
The default preview is JPEG.
-process <command>
process a sequence of images using a process module
The command argument has the form module=arg1,arg2,arg3,...,argN where module is
the name of the module to invoke (e.g. "Analyze") and arg1,arg2,arg3,...,argN are
an arbitrary number of arguments to pass to the process module. The sequence of
images is terminated by the appearance of any option.
If the -process option appears after all of the input images, all images are
processed.
For example:
gm convert logo: -process Analyze= \
-format "%[BrightnessMean],%[BrightnessStddev]" info:-
51952,23294
-profile <filename>
add ICM, IPTC, or generic profile to image
-profile filename adds an ICM (ICC color management), IPTC
(newswire information), or a generic (including Exif) profile to the image
Use +profile icm, +profile iptc, or
+profile profile_name to remove the respective profile.
Multiple profiles may be listed, separated by commas. Profiles may be
excluded from subsequent listed matches by preceding their name with
an exclamation point. For example, +profile '!icm,*' strips
all profiles except for the ICM profile. Use identify
-verbose to find out what profiles are in the image file. Use
+profile "*" to remove all profiles.
Writing the image to a format that does not support profiles will
of course also cause all profiles to be removed. The JPEG and PNG
formats will store any profiles that have been read and not removed.
In JPEG they are stored in APP1 markers, and in PNG they are stored
as hex-coded binary in compressed zTXt chunks, except for the iCC
chunk which is stored in the iCCP chunk.
To extract a profile, the -profile option is not used. Instead,
simply write the file to an image
format such as APP1, 8BIM, ICM, or IPTC.
For example, to extract the Exif data (which is stored in JPEG files
in the APP1 profile), use
gm convert cockatoo.jpg exifdata.app1
Note that GraphicsMagick does not attempt to update any profile to reflect changes
made to the image, e.g., rotation from portrait to landscape orientation, so it is
possible that the preserved profile may contain invalid data.
-preserve-timestamp
preserve the original timestamps of the file
Use this option to preserve the original modification and access timestamps of the
file, even if it has been modified.
+progress
disable progress monitor and busy cursor
By default, when an image is displayed, a progress monitor bar is shown in the top
left corner of an existing image display window, and the current cursor is replaced
with an hourglass cursor. Use +progress to disable the progress monitor and busy
cursor during display operations. While the progress monitor is disabled for all
operations, the busy cursor continues to be enabled for non-display operations such
as image processing. This option is useful for non-interactive display operations,
or when a "clean" look is desired.
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
For the JPEG and MPEG image formats, quality is 0 (lowest image quality and
highest compression) to 100 (best quality but least effective compression). The
default quality is 75. Use the -sampling-factor option to specify the factors for
chroma downsampling. To use the same quality value as that found by the JPEG
decoder, use the -define jpeg:preserve-settings flag.
For the MIFF image format, and the TIFF format while using ZIP compression,
quality/10 is the zlib compression level, which is 0 (worst but fastest
compression) to 9 (best but slowest). It has no effect on the image appearance,
since the compression is always lossless.
For the JPEG-2000 image format, quality is mapped using a non-linear equation to
the compression ratio required by the Jasper library. This non-linear equation is
intended to loosely approximate the quality provided by the JPEG v1 format. The
default quality value 75 results in a request for 16:1 compression. The quality
value 100 results in a request for non-lossy compression.
For the MNG and PNG image formats, the quality value sets the zlib compression
level (quality / 10) and filter-type (quality % 10). Compression levels range from
0 (fastest compression) to 100 (best but slowest). For compression level 0, the
Huffman-only strategy is used, which is fastest but not necessarily the worst
compression.
If filter-type is 4 or less, the specified filter-type is used for all scanlines:
0: none
1: sub
2: up
3: average
4: Paeth
If filter-type is 5, adaptive filtering is used when quality is greater than 50 and
the image does not have a color map, otherwise no filtering is used.
If filter-type is 6, adaptive filtering with minimum-sum-of-absolute-values is
used.
Only if the output is MNG, if filter-type is 7, the LOCO color transformation and
adaptive filtering with minimum-sum-of-absolute-values are used.
The default is quality is 75, which means nearly the best compression with adaptive
filtering. The quality setting has no effect on the appearance of PNG and MNG
images, since the compression is always lossless.
For further information, see the PNG specification.
When writing a JNG image with transparency, two quality values are required, one
for the main image and one for the grayscale image that conveys the opacity
channel. These are written as a single integer equal to the main image quality
plus 1000 times the opacity quality. For example, if you want to use quality 75
for the main image and quality 90 to compress the opacity data, use -quality 90075.
For the PNM family of formats (PNM, PGM, and PPM) specify a quality factor of zero
in order to obtain the ASCII variant of the format. Note that -compress none used
to be used to trigger ASCII output but provided the opposite result of what was
expected as compared with other formats.
For the TIFF format, the JPEG, WebP, Zip, and Zstd compression algorithms are
influenced by the quality value. JPEG and WebP provide lossy compression so higher
quality produces a larger file with less degradation. The Zip and Zstd compression
algorithms (and WebP in lossless mode) are lossless and for these algorithms a
higher ´quality' means to work harder to produce a smaller file, but with no
difference in image quality.
-raise <width>x<height>
lighten or darken image edges
This will create a 3-D effect. See -geometry for details details about the geometry
specification. Offsets are not used.
Use -raise to create a raised effect, otherwise use +raise.
-random-threshold <channeltype> <LOWxHIGH>
random threshold the image
The channel or channels specified in the <channeltype> argument are reduced to
binary, using an random-threshold method. The choices for channeltype are All,
Intensity, Red, Green, Blue, Cyan, Magenta, Yellow, Black, and Opacity
When channeltype is "All", the color samples are thresholded into a graylevel and
then that gray level is stored in the three color channels. Separately, the opacity
channel is thresholded into a bilevel opacity value which is stored in the opacity
channel. For each pixel, a new random number is used to establish the threshold to
be used. The threshold never exceeds the specified maximum (HIGH) and is never less
than the specified minimum (LOW).
When channeltype is "intensity", only the color samples are thresholded. When
channeltype is "opacity" or "matte", only the opacity channel is thresholded. The
other named channels only threshold the associated channel.
-recolor <matrix>
apply a color translation matrix to image channels
A user supplied color translation matrix (expressed as a text string) is used to
translate/blend the image channels based on weightings in a supplied matrix which
may be of order 3 (color channels only), 4 (color channels plus opacity), or 5
(color channels plus opacity and offset). Values in the columns of the matrix
(red, green, blue, opacity) are used as multipliers with the existing channel
values and added together according to the rows of the matrix. Matrix values are
floating point and may be negative. The offset column (column 5) is purely
additive and is scaled such that 0.0 to 1.0 represents the maximum quantum range
(but values are not limited to this range). The math for the color translation
matrix is similar to that used by Adobe Flash except that the offset is scaled to
1.0 (divide Flash offset by 255 for use with GraphicsMagick) so that the results
are independent of quantum depth.
An identity matrix exists for each matrix order which results in no change to the
image. The translation matrix should be based on an alteration of the identity
matrix.
Identity matrix of order 3
1 0 0
0 1 0
0 0 1
which may be formatted into a convenient matrix argument similar to (comma is
treated as white space):
-recolor "1 0 0, 0 1 0, 0 0 1"
Identity matrix of order 4
1 0 0 0
0 1 0 0
0 0 1 0
0 0 0 1
Identity matrix of order 5. The last row is required to exist for the purpose of
parsing, but is otherwise not used.
1 0 0 0 0
0 1 0 0 0
0 0 1 0 0
0 0 0 1 0
0 0 0 0 1
As an example, an image wrongly in BGR channel order may be converted to RGB using
this matrix (blue->red, red->blue):
0 0 1
0 1 0
1 0 0
and an RGB image using standard Rec.709 primaries may be converted to grayscale
using this matrix of standard weighting factors:
0.2126 0.7152 0.0722
0.2126 0.7152 0.0722
0.2126 0.7152 0.0722
and contrast may be reduced by scaling down by 80% and adding a 10% offset:
0.8 0.0 0.0 0.0 0.1
0.0 0.8 0.0 0.0 0.1
0.0 0.0 0.8 0.0 0.1
0.0 0.0 0.0 0.8 0.1
0.0 0.0 0.0 0.0 1.0
-red-primary <x>,<y>
red chromaticity primary point
-region <width>x<height>{+-}<x>{+-}<y>
apply options to a portion of the image
The x and y offsets are treated in the same manner as in -crop.
-remote
perform a X11 remote operation
The -remote command sends a command to a "gm display" or "gm animate" which is
already running. The only command recognized at this time is the name of an image
file to load. This capability is very useful to load new images without needing to
restart GraphicsMagick (e.g. for a slide-show or to use GraphicsMagick as the
display engine for a different GUI). Also see the +progress option for a way to
disable progress indication for a clean look while loading new images.
-render
render vector operations
Use +render to turn off rendering vector operations. This is useful when saving the
result to vector formats such as MVG or SVG.
-repage <width>x<height>+xoff+yoff[!]
Adjust image page offsets
Adjust the current image page canvas and position based on a relative page
specification. This option may be used to change the location of a subframe (e.g.
part of an animation) prior to composition. If the geometry specification is
absolute (includes a '!'), then the offset adjustment is absolute and there is no
adjustment to page width and height, otherwise the page width and height values are
also adjusted based on the current image dimensions. Use +repage to set the image
page offsets to default.
-resample <horizontal>x<vertical>
Resample image to specified horizontal and vertical resolution
Resize the image so that its rendered size remains the same as the original at the
specified target resolution. Either the current image resolution units or the
previously set with -units are used to interpret the argument. For example, if a
300 DPI image renders at 3 inches by 2 inches on a 300 DPI device, when the image
has been resampled to 72 DPI, it will render at 3 inches by 2 inches on a 72 DPI
device. Note that only a small number of image formats (e.g. JPEG, PNG, and TIFF)
are capable of storing the image resolution. For formats which do not support an
image resolution, the original resolution of the image must be specified via
-density on the command line prior to specifying the resample resolution.
Note that Photoshop stores and obtains image resolution from a proprietary embedded
profile. If this profile exists in the image, then Photoshop will continue to treat
the image using its former resolution, ignoring the image resolution specified in
the standard file header.
Some image formats (e.g. PNG) require use of metric or english units so even if the
original image used a particular unit system, if it is saved to a different format
prior to resampling, then it may be necessary to specify the desired resolution
units using -units since the original units may have been lost. In other words, do
not assume that the resolution units are restored if the image has been saved to a
file.
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
This is an alias for the -geometry option and it behaves in the same manner. If the
-filter option precedes the -resize option, the specified filter is used.
There are some exceptions:
When used as a composite option, -resize conveys the preferred size of the output
image, while -geometry conveys the size and placement of the composite image within
the main image.
When used as a montage option, -resize conveys the preferred size of the montage,
while -geometry conveys information about the tiles.
-roll {+-}<x>{+-}<y>
roll an image vertically or horizontally
See -geometry for details the geometry specification. The x and y offsets are not
affected by the -gravity option.
A negative x offset rolls the image left-to-right. A negative y offset rolls the
image top-to-bottom.
-rotate <degrees>{<}{>}
rotate the image
Positive angles rotate the image in a clockwise direction while negative angles
rotate counter-clockwise.
Use > to rotate the image only if its width exceeds the height. < rotates the
image only if its width is less than the height. For example, if you specify
-rotate "-90>" and the image size is 480x640, the image is not rotated. However,
if the image is 640x480, it is rotated by -90 degrees. If you use > or <, enclose
it in quotation marks to prevent it from being misinterpreted as a file
redirection.
Empty triangles left over from rotating the image are filled with the color defined
as background (class backgroundColor). The color is specified using the format
described under the -fill option.
-sample <geometry>
scale image using pixel sampling
See -geometry for details about the geometry specification. -sample ignores the
-filter selection if the -filter option is present. Offsets, if present in the
geometry string, are ignored, and the -gravity option has no effect.
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
This option specifies the sampling factors to be used by the DPX, JPEG, MPEG, or
YUV encoders for chroma downsampling. The sampling factor must be specified while
reading the raw YUV format since it is not preserved in the file header. Industry-
standard video subsampling notation such as "4:2:2" may also be used to specify the
sampling factors. "4:2:2" is equivalent to a specification of "2x1"
The JPEG decoder obtains the original sampling factors (and quality settings) when
a JPEG file is read. To re-use the original sampling factors (and quality setting)
when JPEG is output, use the -define jpeg:preserve-settings flag.
-scale <geometry>
scale the image.
See -geometry for details about the geometry specification. -scale uses a simpler,
faster algorithm, and it ignores the -filter selection if the -filter option is
present. Offsets, if present in the geometry string, are ignored, and the -gravity
option has no effect.
-scene <value>
set scene number
This option sets the scene number of an image or the first image in an image
sequence.
-scenes <value-value>
range of image scene numbers to read
Each image in the range is read with the filename followed by a period (.) and the
decimal scene number. You can change this behavior by embedding a %d, %0Nd, %o,
%0No, %x, or %0Nx printf format specification in the file name. For example,
gm montage -scenes 5-7 image.miff montage.miff
makes a montage of files image.miff.5, image.miff.6, and image.miff.7, and
gm animate -scenes 0-12 image%02d.miff
animates files image00.miff, image01.miff, through image12.miff.
-screen
specify the screen to capture
This option indicates that the GetImage request used to obtain the image should be
done on the root window, rather than directly on the specified window. In this
way, you can obtain pieces of other windows that overlap the specified window, and
more importantly, you can capture menus or other popups that are independent
windows but appear over the specified window.
-set <attribute> <value>
set an image attribute
Set a named image attribute. The attribute is set on the current (previously
specified on command line) image.
+set <attribute>
unset an image attribute
Unset a named image attribute. The attribute is removed from the current
(previously specified on command line) image.
-segment <cluster threshold>x<smoothing threshold>
segment an image
Segment an image by analyzing the histograms of the color components and
identifying units that are homogeneous with the fuzzy c-means technique.
Segmentation is a very useful fast and and approximate color quantization algorithm
for scanned printed pages or scanned cartoons. It may also be used as a special
effect. Specify cluster threshold as the minimum percentage of total pixels in a
cluster before it is considered valid. For huge images containing small detail,
this may need to be a tiny fraction of a percent (e.g. 0.015) so that important
detail is not lost. Smoothing threshold eliminates noise in the second derivative
of the histogram. As the value is increased, you can expect a smoother second
derivative. The default is 1.5. Add the -verbose option to see a dump of cluster
statistics given the parameters used. The statistics may be used as a guide to help
fine tune the options.
-shade <azimuth>x<elevation>
shade the image using a distant light source
Specify azimuth and elevation as the position of the light source. Use +shade to
return the shading results as a grayscale image.
-shadow <radius>{x<sigma>}
shadow the montage
-shared-memory
use shared memory
This option specifies whether the utility should attempt to use shared memory for
pixmaps. GraphicsMagick must be compiled with shared memory support, and the
display must support the MIT-SHM extension. Otherwise, this option is ignored.
The default is True.
-sharpen <radius>{x<sigma>}
sharpen the image
Use a Gaussian operator of the given radius and standard deviation (sigma).
-shave <width>x<height>{%}
shave pixels from the image edges
Specify the width of the region to be removed from both sides of the image and the
height of the regions to be removed from top and bottom.
-shear <x degrees>x<y degrees>
shear the image along the X or Y axis
Use the specified positive or negative shear angle.
Shearing slides one edge of an image along the X or Y axis, creating a
parallelogram. An X direction shear slides an edge along the X axis, while a Y
direction shear slides an edge along the Y axis. The amount of the shear is
controlled by a shear angle. For X direction shears, x degrees is measured relative
to the Y axis, and similarly, for Y direction shears y degrees is measured relative
to the X axis.
Empty triangles left over from shearing the image are filled with the color defined
as background (class backgroundColor). The color is specified using the format
described under the -fill option.
-silent
operate silently
-size <width>x<height>{+offset}
width and height of the image
Use this option to specify the width and height of raw images whose dimensions are
unknown such as GRAY, RGB, or CMYK. In addition to width and height, use -size with
an offset to skip any header information in the image or tell the number of colors
in a MAP image file, (e.g. -size 640x512+256).
For Photo CD images, choose from these sizes:
192x128
384x256
768x512
1536x1024
3072x2048
Finally, use this option to choose a particular resolution layer of a JBIG or JPEG
image (e.g. -size 1024x768).
-snaps <value>
number of screen snapshots
Use this option to grab more than one image from the X server screen, to create an
animation sequence.
-solarize <factor>
negate all pixels above the threshold level
Specify factor as the percent threshold of the intensity (0 - 99.9%).
This option produces a solarization effect seen when exposing a photographic film
to light during the development process.
-spread <amount>
displace image pixels by a random amount
Amount defines the size of the neighborhood around each pixel to choose a candidate
pixel to swap.
-stegano <offset>
hide watermark within an image
Use an offset to start the image hiding some number of pixels from the beginning of
the image. Note this offset and the image size. You will need this information to
recover the steganographic image (e.g. display -size 320x256+35 stegano:image.png).
-stereo
composite two images to create a stereo anaglyph
The left side of the stereo pair is saved as the red channel of the output image.
The right side is saved as the green channel. Red-green stereo glasses are
required to properly view the stereo image.
-strip remove all profiles and text attributes from the image
All embedded profiles and text attributes are stripped from the image. This is
useful for images used for the web, or when output files need to be as small as
possible
Be careful not to use this option to remove author, copyright, and license
information that you are required to retain when redistributing an image.
-stroke <color>
color to use when stroking a graphic primitive
The color is specified using the format described under the -fill option.
See -draw for further details.
-strokewidth <value>
set the stroke width
See -draw for further details.
-swirl <degrees>
swirl image pixels about the center
Degrees defines the tightness of the swirl.
-text-font <name>
font for writing fixed-width text
Specifies the name of the preferred font to use in fixed (typewriter style)
formatted text. The default is 14 point Courier.
You can tag a font to specify whether it is a PostScript, TrueType, or X11 font.
For example, Courier.ttf is a TrueType font and x:fixed is X11.
-texture <filename>
name of texture to tile onto the image background
-threshold <value>{%}
threshold the image
Modify the image such that any pixel sample with an intensity value greater than
the threshold is assigned the maximum intensity (white), or otherwise is assigned
the minimum intensity (black). If a percent prefix is applied, then the threshold
is a percentage of the available range.
To efficiently create a black and white image from a color image, use
gm convert -threshold 50% in.png out.png
The optimum threshold value depends on the nature of the image. In order to
threshold individual channels, use the -operator subcommand with it's Threshold,
Threshold-White, or Threshold-Black options.
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
The -thumbnail command resizes the image as quickly as possible, with more concern
for speed than resulting image quality. Regardless, resulting image quality should
be acceptable for many uses. It is primarily intended to be used to generate
smaller versions of the image, but may also be used to enlarge the image. The
-thumbnail geometry argument observes the same syntax and rules as it does for
-resize.
-tile <filename>
tile image when filling a graphic primitive
-tile <geometry>
layout of images [montage]
-title <string>
assign title to displayed image [animate, display, montage]
Use this option to assign a specific title to the image. This is assigned to the
image window and is typically displayed in the window title bar. Optionally you
can include the image filename, type, width, height, Exif data, or other image
attribute by embedding special format characters described under the -format
option.
For example,
-title "%m:%f %wx%h"
produces an image title of MIFF:bird.miff 512x480 for an image titled bird.miff and
whose width is 512 and height is 480.
-transform
transform the image
This option applies the transformation matrix from a previous -affine option.
gm convert -affine 2,2,-2,2,0,0 -transform bird.ppm bird.jpg
-transparent <color>
make this color transparent within the image
The color is specified using the format described under the -fill option.
-treedepth <value>
tree depth for the color reduction algorithm
Normally, this integer value is zero or one. A value of zero or one causes the use
of an optimal tree depth for the color reduction algorithm
An optimal depth generally allows the best representation of the source image with
the fastest computational speed and the least amount of memory. However, the
default depth is inappropriate for some images. To assure the best representation,
try values between 2 and 8 for this parameter. Refer to quantize for more details.
The -colors or -monochrome option, or writing to an image format which requires
color reduction, is required for this option to take effect.
-trim trim an image
This option removes any edges that are exactly the same color as the corner pixels.
Use -fuzz to make -trim remove edges that are nearly the same color as the corner
pixels.
-type <type>
the image type
Choose from: Bilevel, Grayscale, Palette, PaletteMatte, TrueColor, TrueColorMatte,
ColorSeparation, ColorSeparationMatte, or Optimize.
Normally, when a format supports different subformats such as bilevel, grayscale,
palette, truecolor, and truecolor+alpha, the encoder will try to choose a suitable
subformat based on the nature of the image. The -type option may be used to tailor
the output subformat. By default the output subformat is based on readily available
image information and is usually similar to the input format.
Specify -type Optimize in order to enable inspecting all pixels (if necessary) in
order to find the most efficient subformat. Inspecting all of the pixels may be
slow for very large images, particularly if they are stored in a disk cache. If an
RGB image contains only gray pixels, then every pixel in the image must be
inspected in order to decide that the image is actually grayscale!
Sometimes a specific subformat is desired. For example, to force a JPEG image to be
written in TrueColor RGB format even though only gray pixels are present, use
gm convert bird.pgm -type TrueColor bird.jpg
Similarly, using -type TrueColorMatte will force the encoder to write an alpha
channel even though the image is opaque, if the output format supports
transparency.
Some pseudo-formats (e.g. the XC format) will respect the requested type if it
occurs previously on the command line. For example, to obtain a DirectClass solid
color canvas image rather than PsuedoClass, use
gm convert -size 640x480 -type TrueColor xc:red red.miff
Likewise, specify -type Bilevel, Grayscale, TrueColor, or TrueColorMatte prior to
reading a Postscript (or PDF file) in order to influence the type of image that
Ghostcript returns. Reading performance will be dramatically improved for
black/white Postscript if Bilevel is specified, and will be considerably faster if
Grayscale is specified.
-update <seconds>
detect when image file is modified and redisplay.
Suppose that while you are displaying an image the file that is currently displayed
is over-written. display will automatically detect that the input file has been
changed and update the displayed image accordingly.
-units <type>
the units of image resolution
Choose from: Undefined, PixelsPerInch, or PixelsPerCentimeter. This option is
normally used in conjunction with the -density option.
-unsharp <radius>{x<sigma>}{+<amount>}{+<threshold>}
sharpen the image with an unsharp mask operator
The -unsharp option sharpens an image. The image is convolved with a Gaussian
operator of the given radius and standard deviation (sigma). For reasonable
results, radius should be larger than sigma. Use a radius of 0 to have the method
select a suitable radius.
The parameters are:
radius
The radius of the Gaussian, in pixels, not counting the center pixel (default
0).
sigma
The standard deviation of the Gaussian, in pixels (default 1.0).
amount
The percentage of the difference between the original and the blur image that
is added back into the original (default 1.0).
threshold
The threshold, as a fraction of MaxRGB, needed to apply the difference amount
(default 0.05).
-use-pixmap
use the pixmap
-verbose
print detailed information about the image
This information is printed: image scene number; image name; image size; the image
class (DirectClass or PseudoClass); the total number of unique colors; and the
number of seconds to read and transform the image. If the image is DirectClass, the
total number of unique colors is not displayed unless -verbose is specified twice
since it may take quite a long time to compute, particularly for deep images. If
the image is PseudoClass then its pixels are defined by indexes into a colormap. If
the image is DirectClass then each pixel includes a complete and independent color
specification.
If -colors is also specified, the total unique colors in the image and color
reduction error values are printed. Refer to quantize for a description of these
values.
-version
print detailed GraphicsMagick version/build information
Reports the release version, maximum sample-depth, web-site URL, copyright notice,
feature support, and the options used while building the software. This is the
same output as produced by the 'version' sub-command.
-version
print compact GNU-style GraphicsMagick version information
Reports the release version, maximum sample-depth, web-site URL, and copyright
notice.
-view <string>
FlashPix viewing parameters
-virtual-pixel <method>
specify contents of "virtual pixels"
This option defines "virtual pixels" for use in operations that can access pixels
outside the boundaries of an image.
Choose from these methods:
Constant
Use the image background color.
Edge
Extend the edge pixel toward infinity (default).
Mirror
Mirror the image.
Tile
Tile the image.
This option affects operations that use virtual pixels such as -blur, -sharpen,
-wave, etc.
-visual <type>
animate images using this X visual type
Choose from these visual classes:
StaticGray
GrayScale
StaticColor
PseudoColor
TrueColor
DirectColor
default
visual id
The X server must support the visual you choose, otherwise an error occurs. If a
visual is not specified, the visual class that can display the most simultaneous
colors on the default screen is chosen.
-watermark <brightness>x<saturation>
percent brightness and saturation of a watermark
-wave <amplitude>x<wavelength>
alter an image along a sine wave
Specify amplitude and wavelength of the wave.
-white-point <x>,<y>
chromaticity white point
-white-threshold red[,green][,blue][,opacity]
pixels above the threshold become white
Use -white-threshold to set pixels with values above the specified threshold to
maximum value (white). If only one value is supplied, or the red, green, and blue
values are identical, then intensity thresholding is used. If the color threshold
values are not identical then channel-based thresholding is used, and color
distortion will occur. Specify a negative value (e.g. -1) if you want a channel to
be ignored but you do want to threshold a channel later in the list. If a percent
(%) symbol is appended, then the values are treated as a percentage of maximum
range.
-window <id>
make image the background of a window
id can be a window id or name. Specify root to select X's root window as the
target window.
By default the image is tiled onto the background of the target window. If
backdrop or -geometry are specified, the image is surrounded by the background
color. Refer to X RESOURCES for details.
The image will not display on the root window if the image has more unique colors
than the target window colormap allows. Use -colors to reduce the number of
colors.
-window-group
specify the window group
-write <filename>
write an intermediate image [convert, composite]
The current image is written to the specified filename and then processing
continues using that image. The following is an example of how several sizes of an
image may be generated in one command (repeat as often as needed):
gm convert input.jpg -resize 50% -write input50.jpg \
-resize 25% input25.jpg
-write <filename>
write the image to a file [display]
If filename already exists, you will be prompted as to whether it should be
overwritten.
By default, the image is written in the format that it was read in as. To specify
a particular image format, prefix filename with the image type and a colon (e.g.,
ps:image) or specify the image type as the filename suffix (e.g., image.ps).
Specify file as - for standard output. If file has the extension .Z or .gz, the
file size is compressed using compress or gzip respectively. Precede the image file
name with | to pipe to a system command.
Use -compress to specify the type of image compression.
The equivalent X resource for this option is writeFilename (class WriteFilename).
See "X Resources", below, for details.
ENVIRONMENT
COLUMNS
Output screen width. Used when formatting text for the screen. Many Unix systems
keep this shell variable up to date, but it may need to be explicitly exported in
order for GraphicsMagick to see it.
DISPLAY
X11 display ID (host, display number, and screen in the form
hostname:display.screen).
HOME Location of user's home directory. For security reasons, now only observed by
"uninstalled" builds of GraphicsMagick which do not have their location hard-coded
or set by an installer. When supported, GraphicsMagick searches for configuration
files in $HOME/.magick if the directory exists. See MAGICK_CODER_MODULE_PATH,
MAGICK_CONFIGURE_PATH, and MAGICK_FILTER_MODULE_PATH if more flexibility is needed.
MAGICK_ACCESS_MONITOR
When set to TRUE, command line monitor mode (enabled by -monitor) will also show
files accessed (including temporary files) and any external commands which are
executed. This is useful for debugging, but also illustrates arguments made
available to an access handler registered by the MagickSetConfirmAccessHandler() C
library function.
MAGICK_CODER_STABILITY
The minimum coder stability level before it will be used. The available levels are
PRIMARY, STABLE, UNSTABLE, and BROKEN. The default minimum level is UNSTABLE,
which means that all available working coders will be used. The purpose of this
option is to reduce the security exposure (or apparent complexity) due to the huge
number of formats supported. Coders at the PRIMARY level are commonly used formats
with very well maintained implementations. Coders at the STABLE level are
reasonably well maintained but represent less used formats. Coders at the UNSTABLE
level either have weak implementations, the file format itself is weak, or the
probability the coder will be needed is vanishingly small. Coders at the BROKEN
level are known to often not work properly or might not be useful in their current
state at all.
MAGICK_CODER_MODULE_PATH
Search path to use when searching for image format coder modules. This path allows
the user to arbitrarily extend the image formats supported by GraphicsMagick by
adding loadable modules to an arbitrary location rather than copying them into the
GraphicsMagick installation directory. The formatting of the search path is similar
to operating system search paths (i.e. colon delimited for Unix, and semi-colon
delimited for Microsoft Windows). This user specified search path is used before
trying the default search path.
MAGICK_CONFIGURE_PATH
Search path to use when searching for configuration (.mgk) files. The formatting
of the search path is similar to operating system search paths (i.e. colon
delimited for Unix, and semi-colon delimited for Microsoft Windows). This user
specified search path is used before trying the default search path.
MAGICK_DEBUG
Debug options (see -debug for details). Setting the configure debug option via an
environment variable (e.g. MAGICK_DEBUG=configure) is necessary to see the complete
initialization process, which includes searching for configuration files.
MAGICK_FILTER_MODULE_PATH
Search path to use when searching for filter process modules (invoked via
-process). This path allows the user to arbitrarily extend GraphicsMagick's image
processing functionality by adding loadable modules to an arbitrary location rather
than copying them into the GraphicsMagick installation directory. The formatting of
the search path is similar to operating system search paths (i.e. colon delimited
for Unix, and semi-colon delimited for Microsoft Windows). This user specified
search path is used before trying the default search path.
MAGICK_GHOSTSCRIPT_PATH
For Microsoft Windows, specify the path to the Ghostscript installation rather than
searching for it via the Windows registry. This helps in case Ghostscript is not
installed via the Ghostscript Windows installer or the user wants more control over
the Ghostscript used.
MAGICK_HOME
Path to top of GraphicsMagick installation directory. Only observed by
"uninstalled" builds of GraphicsMagick which do not have their location hard-coded
or set by an installer.
MAGICK_MMAP_READ
If MAGICK_MMAP_READ is set to TRUE, GraphicsMagick will attempt to memory-map the
input file for reading. This usually substantially improves repeated read
performance since the file is already in memory after the first time it has been
read. However, testing shows that performance may be reduced for files accessed for
the first time since data is accessed via page-faults (upon first access) and many
operating systems fail to do sequential read-ahead of memory mapped files, and
particularly if those files are accessed over a network. If many large input files
are read, then enabling this option may harm performance by overloading the
operating system's VM system as it then needs to free unmapped pages and map new
ones.
MAGICK_IO_FSYNC
If MAGICK_IO_FSYNC is set to TRUE, then GraphicsMagick will request that the output
file is fully flushed and synchronized to disk when it is closed. This incurs a
performance penalty, but has the benefit that if the power fails or the system
crashes, the file should be valid on disk. If image files are referenced from a
database, then this option helps assure that the files referenced by the database
are valid.
MAGICK_IOBUF_SIZE
The amount of I/O buffering (in bytes) to use when reading and writing encoded
files. The default is 16384, which is observed to work well for many cases. The
best value for a local filesystem is usually the the native filesystem block size
(e.g. 4096, 8192, or even 131,072 for ZFS) in order to minimize the number of
physical disk I/O operations. I/O performance to files accessed over a network may
benefit significantly by tuning this option. Larger values are not necessarily
better (they may be slower!), and there is rarely any benefit from using values
larger than 32768. Use convert's -verbose option in order to evaluate read and
write rates in pixels per second while keeping in mind that the operating system
will try to cache files in RAM.
MAGICK_LIMIT_DISK
Maximum amount of disk space allowed for use by the pixel cache.
MAGICK_LIMIT_FILES
Maximum number of open files.
MAGICK_LIMIT_MAP
Maximum size of a memory mapped file allocation. A memory mapped file consumes
memory when the file is accessed, although the system may reclaim such memory when
needed.
MAGICK_LIMIT_MEMORY
Maximum amount of memory to allocate from the heap.
MAGICK_LIMIT_PIXELS
Maximum number of total pixels (image rows times image columns) to allow for any
image which is requested to be created or read. This is useful to place a limit on
how large an image may be. If the input image file has image dimensions larger
than the pixel limit, then the image memory allocation is denied and an error is
returned immediately. This is a per-image limit and does not limit the total
number of pixels due to multiple image frames/pages (e.g. multi-page document or an
animation).
MAGICK_LIMIT_READ
Maximum number of uncompressed bytes which may be read while decoding an image.
Each read by the software from the input file is counted against the total, even if
it has been read before. Decoding fails when the limit is reached. This limit
helps defend against highly compressed files (e.g. via gzip), or files which use
complex looping structures, or when data is being read from a stream (pipe).
MAGICK_LIMIT_WIDTH
Maximum pixel width of an image read, or created.
MAGICK_LIMIT_HEIGHT
Maximum pixel height of an image read, or created.
MAGICK_TMPDIR
Path to directory where GraphicsMagick should write temporary files. The default is
to use the system default, or the location set by TMPDIR.
TMPDIR For POSIX-compatible systems (Unix-compatible), the path to the directory where all
applications should write temporary files. Overridden by MAGICK_TMPDIR if it is
set.
TMP or TEMP
For Microsoft Windows, the path to the directory where applications should write
temporary files. Overridden by MAGICK_TMPDIR if it is set.
OMP_NUM_THREADS
As per the OpenMP standard, this specifies the number of threads to use in parallel
regions. Some compilers default the number of threads to use to the number of
processor cores available while others default to just one thread. See the OpenMP
specification for other standard adjustments and your compiler's manual for vendor-
specific settings.
CONFIGURATION FILES
GraphicsMagick uses a number of XML format configuration files:
colors.mgk
colors configuration file
<?xml version="1.0"?>
<colormap>
<color name="AliceBlue" red="240" green="248" blue="255"
compliance="SVG, X11, XPM" />
</colormap>
delegates.mgk
delegates configuration file
log.mgk
logging configuration file
<?xml version="1.0"?>
<magicklog>
<log events="None" />
<log output="stdout" />
<log filename="Magick-%d.log" />
<log generations="3" />
<log limit="2000" />
<log format="%t %r %u %p %m/%f/%l/%d:\n %e" />
</magicklog>
modules.mgk
loadable modules configuration file
<?xml version="1.0"?>
<modulemap>
<module magick="8BIM" name="META" />
</modulemap>
type.mgk
master type (fonts) configuration file
<?xml version="1.0"?>
<typemap>
<include file="type-windows.mgk" />
<type
name="AvantGarde-Book"
fullname="AvantGarde Book"
family="AvantGarde"
foundry="URW"
weight="400"
style="normal"
stretch="normal"
format="type1"
metrics="/usr/local/share/ghostscript/fonts/a010013l.afm"
glyphs="/usr/local/share/ghostscript/fonts/a010013l.pfb"
/>
</typemap>
GM ANIMATE
Animate displays a sequence of images on any workstation display running an X server.
animate first determines the hardware capabilities of the workstation. If the number of
unique colors in an image is less than or equal to the number the workstation can support,
the image is displayed in an X window. Otherwise the number of colors in the image is
first reduced to match the color resolution of the workstation before it is displayed.
This means that a continuous-tone 24 bits-per-pixel image can display on a 8 bit pseudo-
color device or monochrome device. In most instances the reduced color image closely
resembles the original. Alternatively, a monochrome or pseudo-color image sequence can
display on a continuous-tone 24 bits-per-pixel device.
To help prevent color flashing on X server visuals that have colormaps, animate creates a
single colormap from the image sequence. This can be rather time consuming. You can speed
this operation up by reducing the colors in the image before you "animate" them. Use
mogrify to color reduce the images to a single colormap. See mogrify(1) for details.
Alternatively, you can use a Standard Colormap; or a static, direct, or true color visual.
You can define a Standard Colormap with xstdcmap. See xstdcmap(1) for details. This method
is recommended for colormapped X server because it eliminates the need to compute a global
colormap.
EXAMPLES
To animate a set of images of a cockatoo, use:
gm animate cockatoo.*
To animate a cockatoo image sequence while using the Standard Colormap best, use:
xstdcmap -best
gm animate -map best cockatoo.*
To animate an image of a cockatoo without a border centered on a backdrop, use:
gm animate +borderwidth -backdrop cockatoo.*
OPTIONS
For a more detailed description of each option, see Options, above.
-authenticate <string>
decrypt image with this password
-backdrop
display the image centered on a backdrop.
-background <color>
the background color
-bordercolor <color>
the border color
-borderwidth <geometry>
the border width
-chop <width>x<height>{+-}<x>{+-}<y>{%}
remove pixels from the interior of an image
-colormap <type>
define the colormap type
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-delay <1/100ths of a second>
display the next image after pausing
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-font <name>
use this font when annotating the image with text
-foreground <color>
define the foreground color
-gamma <value>
level of gamma correction
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-help print usage instructions
-iconGeometry <geometry>
specify the icon geometry
-iconic
iconic animation
-interlace <type>
the type of interlacing scheme
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-map <type>
display image using this type.
-matte store matte channel if the image has one
-mattecolor <color>
specify the color to be used with the -frame option
-monitor
show progress indication
-monochrome
transform the image to black and white
-name name an image
-noop NOOP (no option)
-pause <seconds>
pause between animation loops [animate]
-remote
perform a X11 remote operation
-rotate <degrees>{<}{>}
rotate the image
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scenes <value-value>
range of image scene numbers to read
-shared-memory
use shared memory
-size <width>x<height>{+offset}
width and height of the image
-text-font <name>
font for writing fixed-width text
-title <string>
assign title to displayed image [animate, display, montage]
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-visual <type>
animate images using this X visual type
-window <id>
make image the background of a window
For a more detailed description of each option, see Options, above.
Any option you specify on the command line remains in effect for the group of
images following it, until the group is terminated by the appearance of any option
or -noop. For example, to animate three images, the first with 32 colors, the
second with an unlimited number of colors, and the third with only 16 colors, use:
gm animate -colors 32 cockatoo.1 -noop cockatoo.2
-colors 16 cockatoo.3
Animate options can appear on the command line or in your X resources file. See
X(1). Options on the command line supersede values specified in your X resources
file. Image filenames may appear in any order on the command line if the image
format is MIFF (refer to miff(5) and the scene keyword is specified in the image.
Otherwise the images will display in the order they appear on the command line.
MOUSE BUTTONS
Press any button to map or unmap the Command widget. See the next section for more
information about the Command widget.
COMMAND WIDGET
The Command widget lists a number of sub-menus and commands. They are
Animate
Open
Play
Step
Repeat
Auto Reverse
Speed
Faster
Slower
Direction
Forward
Reverse
Image Info
Help
Quit
Menu items with a indented triangle have a sub-menu. They are represented above as the
indented items. To access a sub-menu item, move the pointer to the appropriate menu and
press a button and drag. When you find the desired sub-menu item, release the button and
the command is executed. Move the pointer away from the sub-menu if you decide not to
execute a particular command.
KEYBOARD ACCELERATORS
Ctl+O
Press to load an image from a file.
space
Press to display the next image in the sequence.
<
Press to speed-up the display of the images. Refer to -delay for more
information.
>
Press to slow the display of the images. Refer to -delay for more
information.
?
Press to display information about the image. Press any key or button to
erase the information.
This information is printed: image name; image size; and the total number of
unique colors in the image.
F1
Press to display helpful information about animate(1).
Ctl-q
Press to discard all images and exit program.
X RESOURCES
Animate options can appear on the command line or in your X resource file. Options on the
command line supersede values specified in your X resource file. See X(1) for more
information on X resources.
All animate options have a corresponding X resource. In addition, the animate program uses
the following X resources:
background (class Background)
Specifies the preferred color to use for the Image window background. The
default is #ccc.
borderColor (class BorderColor)
Specifies the preferred color to use for the Image window border. The default
is #ccc.
borderWidth (class BorderWidth)
Specifies the width in pixels of the Image window border. The default is 2.
font (class Font or FontList)
Specifies the name of the preferred font to use in normal formatted text.
The default is 14 point Helvetica.
foreground (class Foreground)
Specifies the preferred color to use for text within the Image window. The
default is black.
geometry (class geometry)
Specifies the preferred size and position of the image window. It is not
necessarily obeyed by all window managers. Offsets, if present, are handled
in X(1) style. A negative x offset is measured from the right edge of the
screen to the right edge of the icon, and a negative y offset is measured
from the bottom edge of the screen to the bottom edge of the icon.
iconGeometry (class IconGeometry)
Specifies the preferred size and position of the application when iconified.
It is not necessarily obeyed by all window managers. Offsets, if present,
are handled in the same manner as in class Geometry.
iconic (class Iconic)
This resource indicates that you would prefer that the application's windows
initially not be visible as if the windows had be immediately iconified by
you. Window managers may choose not to honor the application's request.
matteColor (class MatteColor)
Specify the color of windows. It is used for the backgrounds of windows,
menus, and notices. A 3D effect is achieved by using highlight and shadow
colors derived from this color. Default value: #ddd.
name (class Name)
This resource specifies the name under which resources for the application
should be found. This resource is useful in shell aliases to distinguish
between invocations of an application, without resorting to creating links to
alter the executable file name. The default is the application name.
sharedMemory (class SharedMemory)
This resource specifies whether animate should attempt use shared memory for
pixmaps. ImageMagick must be compiled with shared memory support, and the
display must support the MIT-SHM extension. Otherwise, this resource is
ignored. The default is True.
text_font (class textFont)
Specifies the name of the preferred font to use in fixed (typewriter style)
formatted text. The default is 14 point Courier.
title (class Title)
This resource specifies the title to be used for the Image window. This
information is sometimes used by a window manager to provide some sort of
header identifying the window. The default is the image file name.
GM BATCH
DESCRIPTION
batch executes an arbitrary number of the utility commands (e.g. convert) in the form of a
simple linear batch script in order to improve execution efficiency, and/or to allow use
as a subordinate co-process under the control of an arbitrary script or program.
EXAMPLES
To drive 'gm batch' using a shell script (or a program written in any language), have the
script/program send commands to 'gm batch' via its standard input. Specify that standard
input should be used by using '-' as the file name. The following example converts all
files matching '*.jpg' to TIFF format while rotating each file by 90 degrees and stripping
all embedded profiles. The shell script syntax is standard Unix shell:
for file in *.jpg
do
outfile=`basename $file .jpg`.tiff
echo convert -verbose "'$file'" -rotate 90 \
+profile "'*'" "'$outfile'"
done | gm batch -echo on -feedback on -
We can accomplish the same as the previous example by putting all the commands in a text
file and then specifying the name of the text file as the script to execute:
for file in *.jpg
do
outfile=`basename $file .jpg`.tiff
echo convert -verbose "'$file'" -rotate 90 \
+profile "'*'" "'$outfile'"
done > script.txt
gm batch -echo on -feedback on script.txt
OPTIONS
Options are processed from left to right and must appear before any filename argument.
-echo on|off
command echo on or off
Specify on to enable echoing commands to standard output as they are read or off to
disable. The default is off.
-escape unix|windows
Parse using unix or windows syntax
Commands must be parsed from the input stream and escaping needs to be used to
protect spaces or quoting characters in the input. Specify unix to use unix-style
command line parsing or windows for Microsoft Windows command shell style parsing.
The default depends on if the software is compiled for Microsoft Windows or for a
Unix-type system (including Cygwin on Microsoft Windows). It is recommended to use
unix syntax because it is more powerful and more portable.
-fail text
text to print if a command fails
When feedback is enabled, this specifies the text to print when the command fails.
The default text is FAIL.
-feedback on|off
enable error feedback
Print text (see -pass and -fail options) feedback after each command to indicate
the result, the default is off.
-help
Prints batch command help.
-pass text
text to print if a command passes
When feedback is enabled, this specifies the text to print when the command passes.
The default text is PASS.
-prompt text
Prompt text to use for command line
If no filename argument was specified, a simple command prompt appears where you
may enter GraphicsMagick commands. The default prompt is GM>. Use this option to
change the prompt to something else.
-stop-on-error on|off
Specify if command processing stops on error
Normally command processing continues if a command encounters an error. Specify
-stop-on-error on to cause processing to quit immediately on error.
GM BENCHMARK
DESCRIPTION
benchmark executes an arbitrary gm utility command (e.g. convert) for one or more loops,
and/or a specified execution time, and reports many execution metrics. For builds using
OpenMP, a mode is provided to execute the benchmark with an increasing number of threads
and provide a report of speedup and multi-thread execution efficiency. If benchmark is
used to execute a command without any additional benchmark options, then the command is
run once.
EXAMPLES
To obtain benchmark information for a single execution of a command:
gm benchmark convert input.ppm -gaussian 0x1 output.ppm
To obtain benchmark information from 100 iterations of the command:
gm benchmark -iterations 100 convert input.ppm \
-gaussian 0x1 output.ppm
To obtain benchmark information by iterating the command until a specified amount of time
(in seconds) has been consumed:
gm benchmark -duration 30 convert input.ppm \
-gaussian 0x1 output.ppm
To obtain a full performance report with an increasing number of threads (1-32 threads,
stepping the number of threads by four each time):
gm benchmark -duration 3 -stepthreads 4 convert \
input.ppm -gaussian 0x2 output.ppm
Here is the interpretation of the output:
threads - number of threads used.
iter - number of command iterations executed.
user - total user time consumed.
total - total elapsed time consumed.
iter/s - number of command iterations per second.
iter/cpu - amount of CPU time consumed per iteration.
speedup - speedup compared with one thread.
karp-flatt - Karp-Flatt measure of speedup efficiency.
Please note that the reported "speedup" is based on the execution time of just one thread.
A preliminary warm-up pass is used before timing the first loop in order to ensure that
the CPU is brought out of power-saving modes and that system caches are warmed up. Most
modern CPUs provide a "turbo" mode where the CPU clock speed is increased (e.g. by a
factor of two) when only one or two cores are active. If the CPU grows excessively hot
(due to insufficient cooling), then it may dial back its clock rates as a form of thermal
management. These factors result in an under-reporting of speedup compared to if "turbo"
mode was disabled and the CPU does not need to worry about thermal management. The
powertop utility available under Linux and Solaris provides a way to observe CPU core
clock rates while a benchmark is running.
OPTIONS
Options are processed from left to right and must appear before any argument.
-duration duration
duration to run benchmark Specify the number of seconds to run the benchmark. The
command is executed repeatedly until the specified amount of time has elapsed.
-help
Prints benchmark command help.
-iterations loops
number of command iterations Specify the number of iterations to run the benchmark.
The command is executed repeatedly until the specified number of iterations has
been reached.
-rawcsv
Print results in CSV format Print results in a comma-separated value (CSV) format
which is easy to parse for plotting or importing into a spreadsheet or database.
The values reported are threads, iterations, user_time, and elapsed_time.
-stepthreads step
execute a per-thread benchmark ramp
Execute a per-thread benchmark ramp, incrementing the number of threads at each
step by the specified value. The maximum number of threads is taken from the
standard OMP_NUM_THREADS environment variable.
GM COMPARE
compare compares two similar images using a specified statistical method (see -metric)
and/or by writing a difference image (-file), with the altered pixels annotated using a
specified method (see -highlight-style) and color (see -highlight-color). Reference-image
is the original image and compare-image is the (possibly) altered version, which should
have the same dimensions as reference-image.
EXAMPLES
To compare two images using Mean Square Error (MSE) statistical analysis use:
gm compare -metric mse original.miff compare.miff
To create an annotated difference image use:
gm compare -highlight-style assign -highlight-color purple \
-file diff.miff original.miff compare.miff
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect only for the image that follows. All options are reset to their default
values after each image is read.
For a more detailed description of each option, see Options, above.
-authenticate <string>
decrypt image with this password
-auto-orient
orient (rotate) image so it is upright
-colorspace <value>
the type of colorspace
-compress <type>
the type of image compression
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-display <host:display[.screen]>
specifies the X server to contact
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-file <filename>
write annotated difference image to file
-help print usage instructions
-highlight-color <color>
pixel annotation color
-highlight-style <style>
pixel annotation style
-interlace <type>
the type of interlacing scheme
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-matte store matte channel if the image has one
-maximum-error <limit>
specifies the maximum amount of total image error
-metric <metric>
comparison metric (MAE, MSE, PAE, PSNR, RMSE)
-monitor
show progress indication
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-size <width>x<height>{+offset}
width and height of the image
-type <type>
the image type
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
For a more detailed description of each option, see Options, above.
GM COMPOSITE
composite composites (combines) images to create new images. base-image is the base image
and change-image contains the changes. ouput-image is the result, and normally has the
same dimensions as base-image.
The optional mask-image can be used to provide opacity information for change-image when
it has none or if you want a different mask. A mask image is typically grayscale and the
same size as base-image. If mask-image is not grayscale, it is converted to grayscale and
the resulting intensities are used as opacity information.
EXAMPLES
To composite an image of a cockatoo with a perch, use:
gm composite cockatoo.miff perch.ras composite.miff
To compute the difference between images in a series, use:
gm composite -compose difference series.2 series.1
difference.miff
To composite an image of a cockatoo with a perch starting at location (100,150), use:
gm composite -geometry +100+150 cockatoo.miff
perch.ras composite.miff
To tile a logo across your image of a cockatoo, use
gm convert +shade 30x60 cockatoo.miff mask.miff
gm composite -compose bumpmap -tile logo.png
cockatoo.miff mask.miff composite.miff
To composite a red, green, and blue color plane into a single composite image, try
gm composite -compose CopyGreen green.png red.png
red-green.png
gm composite -compose CopyBlue blue.png red-green.png
gm composite.png
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect only for the image that follows. All options are reset to their default
values after each image is read.
For a more detailed description of each option, see Options, above.
-authenticate <string>
decrypt image with this password
-background <color>
the background color
-blue-primary <x>,<y>
blue chromaticity primary point
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-compose <operator>
the type of image composition
-compress <type>
the type of image compression
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-displace <horizontal scale>x<vertical scale>
shift image pixels as defined by a displacement map
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dissolve <percent>
dissolve an image into another by the given percent
-dither
apply Floyd/Steinberg error diffusion to the image
-encoding <type>
specify the text encoding
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-filter <type>
use this type of filter when resizing an image
-font <name>
use this font when annotating the image with text
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-gravity <type>
direction primitive gravitates to when annotating the image.
-green-primary <x>,<y>
green chromaticity primary point
-help print usage instructions
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-matte store matte channel if the image has one
-monitor
show progress indication
-monochrome
transform the image to black and white
-negate
replace every pixel with its complementary color
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
-profile <filename>
add ICM, IPTC, or generic profile to image
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-recolor <matrix>
apply a color translation matrix to image channels
-red-primary <x>,<y>
red chromaticity primary point
-render
render vector operations
-repage <width>x<height>+xoff+yoff[!]
Adjust image page offsets
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
-rotate <degrees>{<}{>}
rotate the image
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scene <value>
set scene number
-set <attribute> <value>
set an image attribute
+set <attribute>
unset an image attribute
-sharpen <radius>{x<sigma>}
sharpen the image
-size <width>x<height>{+offset}
width and height of the image
-stegano <offset>
hide watermark within an image
-stereo
composite two images to create a stereo anaglyph
-strip remove all profiles and text attributes from the image
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-units <type>
the units of image resolution
-unsharp <radius>{x<sigma>}{+<amount>}{+<threshold>}
sharpen the image with an unsharp mask operator
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-watermark <brightness>x<saturation>
percent brightness and saturation of a watermark
-white-point <x>,<y>
chromaticity white point
-write <filename>
write an intermediate image [convert, composite]
For a more detailed description of each option, see Options, above.
GM CONJURE
The Magick scripting language (MSL) will primarily benefit those that want to accomplish
custom image processing tasks but do not wish to program, or those that do not have access
to a Perl interpreter or a compiler. The interpreter is called conjure and here is an
example script:
<?xml version="1.0" encoding="UTF-8"?>
<image size="400x400" >
<read filename="image.gif" />
<get width="base-width" height="base-height" />
<resize geometry="%[dimensions]" />
<get width="width" height="height" />
<print output=
"Image sized from %[base-width]x%[base-height]
to %[width]x%[height].\n" />
<write filename="image.png" />
</image>
invoked with
gm conjure -dimensions 400x400 incantation.msl
All operations will closely follow the key/value pairs defined in PerlMagick, unless
otherwise noted.
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect until it is explicitly changed by specifying the option again with a
different effect, or if it is changed by a statement in the scripting language.
You can define your own keyword/value pairs on the command line. The script can then use
this information when setting values by including %[keyword] in the string. For example,
if you included "-dimensions 400x400" on the command line, as illustrated above, then any
string containing "%[dimensions]" would have 400x400 substituted. The "%[string]" can be
used either an entire string, such as geometry="%[dimensions]" or as a part of a string
such as filename="%[basename].png".
The keyword can be any string except for the following reserved strings (in any upper,
lower, or mixed case variant): debug, help, and verbose, whose usage is described below.
The value can be any string. If either the keyword or the value contains white space or
any symbols that have special meanings to your shell such as "#", "|", or "%", enclose the
string in quotation marks or use "\" to escape the white space and special symbols.
Keywords and values are case dependent. "Key", "key", and "KEY" would be three different
keywords.
For a more detailed description of each option, see Options, above.
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-help print usage instructions
-log <string>
Specify format for debug log
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
MAGICK SCRIPTING LANGUAGE
The Magick Scripting Language (MSL) presently defines the following elements and their
attributes:
<image>
background, color, id, size
Define a new image object. </image> destroys it. Because of this, if you
wish to reference multiple "subimages" (aka pages or layers), you can embed
one image element inside of another. For example:
<image>
<read filename="input.png" />
<get width="base-width" height="base-height" />
<image height="base-height" width="base-width">
<image />
<write filename="output.mng" />
</image>
<image size="400x400" />
<group>
Define a new group of image objects. By default, images are only valid for
the life of their <image>element.
<image> -- creates the image
..... -- do stuff with it
</image> -- dispose of the image
However, in a group, all images in that group will stay around for the life
of the group:
<group> -- start a group
<image> -- create an image
.... -- do stuff
</image> -- NOOP
<image> -- create another image
.... -- do more stuff
</image> -- NOOP
<write filename="image.mng" /> -- output
</group> -- dispose of both images
<read>
filename
Read a new image from a disk file.
<read filename="image.gif" />
To read two images use
<read filename="image.gif" />
<read filename="image.png />
<write>
filename
Write the image(s) to disk, either as a single multiple-image file or
multiple ones if necessary.
<write filename=image.tiff" />
<get>
Get any attribute recognized by PerlMagick's GetAttribute() and stores it as
an image attribute for later use. Currently only width and height are
supported.
<get width="base-width" height="base-height" />
<print output="Image size is %[base-width]x%[base-height].\n" />
<set>
background, bordercolor, clip-mask, colorspace, density, magick, mattecolor,
opacity. Set an attribute recognized by PerlMagick's GetAttribute().
<profile>
[profilename]
Read one or more IPTC, ICC or generic profiles from file and assign to image
<profile iptc="profile.iptc" generic="generic.dat" />
To remove a specified profile use "!" as the filename eg
<profile icm="!" iptc="profile.iptc" />
<border>
fill, geometry, height, width
<blur>
radius, sigma
<charcoal>
radius, sigma
<chop>
geometry, height, width, x, y
<crop>
geometry, height, width, x, y
<composite>
compose, geometry, gravity, image, x, y
<?xml version="1.0" encoding="UTF-8"?>
<group>
<image id="image_01">
<read filename="cloud3.gif"/>
<resize geometry="250x90"/>
</image>
<image id="image_02">
<read filename="cloud4.gif"/>
<resize geometry="190x100"/>
</image>
<image>
<read filename="background.jpg"/>
<composite image="image_01" geometry="+740+470"/>
<composite image="image_02" geometry="+390+415"/>
</image>
<write filename="result.png"/>
</group>
<despeckle>
<emboss>
radius, sigma
<enhance>
<equalize>
<edge>
radius
<flip>
<flop>
<frame>
fill, geometry, height, width, x, y, inner, outer
<flatten>
<get>
height, width
<gamma>
red, green, blue
<image>
background, color, id, size
<implode>
amount
<magnify>
<minify>
<medianfilter>
radius
<normalize>
<oilpaint>
radius
<print>
output
<profile>
[profilename]
<read>
<resize>
blur, filter, geometry, height, width
<roll>
geometry, x, y
<rotate>
degrees
<reducenoise>
radius
<sample>
geometry, height, width
<scale>
geometry, height, width
<sharpen>
radius, sigma
<shave>
geometry, height, width
<shear>
x, y
<solarize>
threshold
<spread>
radius
<stegano>
image
<stereo>
image
<swirl>
degrees
<texture>
image
<threshold>
threshold
<transparent>
color
<trim>
GM CONVERT
Convert converts an input file using one image format to an output file with a differing
image format. In addition, various types of image processing can be performed on the
converted image during the conversion process. Convert recognizes the image formats listed
in GraphicsMagick(1).
EXAMPLES
To make a thumbnail of a JPEG image, use:
gm convert -size 120x120 cockatoo.jpg -resize 120x120
+profile "*" thumbnail.jpg
In this example, '-size 120x120' gives a hint to the JPEG decoder that the image is going
to be downscaled to 120x120, allowing it to run faster by avoiding returning full-
resolution images to GraphicsMagick for the subsequent resizing operation. The ´-resize
120x120' specifies the desired dimensions of the output image. It will be scaled so its
largest dimension is 120 pixels. The ´+profile "*"' removes any ICM, EXIF, IPTC, or other
profiles that might be present in the input and aren't needed in the thumbnail.
To convert a MIFF image of a cockatoo to a SUN raster image, use:
gm convert cockatoo.miff sun:cockatoo.ras
To convert a multi-page PostScript document to individual FAX pages, use:
gm convert -monochrome document.ps fax:page
To convert a TIFF image to a PostScript A4 page with the image in the lower left-hand
corner, use:
gm convert -page A4+0+0 image.tiff document.ps
To convert a raw Gray image with a 128 byte header to a portable graymap, use:
gm convert -depth 8 -size 768x512+128 gray:raw
image.pgm
In this example, "raw" is the input file. Its format is "gray" and it has the dimensions
and number of header bytes specified by the -size option and the sample depth specified by
the -depth option. The output file is "image.pgm". The suffix ".pgm" specifies its
format.
To convert a Photo CD image to a TIFF image, use:
gm convert -size 1536x1024 img0009.pcd image.tiff
gm convert img0009.pcd[4] image.tiff
To create a visual image directory of all your JPEG images, use:
gm convert 'vid:*.jpg' directory.miff
To annotate an image with blue text using font 12x24 at position (100,100), use:
gm convert -font helvetica -fill blue
-draw "text 100,100 Cockatoo"
bird.jpg bird.miff
To tile a 640x480 image with a JPEG texture with bumps use:
gm convert -size 640x480 tile:bumps.jpg tiled.png
To surround an icon with an ornamental border to use with Mosaic(1), use:
gm convert -mattecolor "#697B8F" -frame 6x6 bird.jpg
icon.png
To create a MNG animation from a DNA molecule sequence, use:
gm convert -delay 20 dna.* dna.mng
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect for the set of images that follows, until the set is terminated by the
appearance of any option or -noop. Some options only affect the decoding of images and
others only the encoding. The latter can appear after the final group of input images.
For a more detailed description of each option, see Options, above.
-adjoin
join images into a single multi-image file
-affine <matrix>
drawing transform matrix
-antialias
remove pixel aliasing
-append
append a set of images
-asc-cdl <spec>
apply ASC CDL color transform
-authenticate <string>
decrypt image with this password
-auto-orient
orient (rotate) image so it is upright
-average
average a set of images
-background <color>
the background color
-black-threshold red[,green][,blue][,opacity]
pixels below the threshold become black
-blue-primary <x>,<y>
blue chromaticity primary point
-blur <radius>{x<sigma>}
blur the image with a Gaussian operator
-border <width>x<height>
surround the image with a border of color
-bordercolor <color>
the border color
-box <color>
set the color of the annotation bounding box
-channel <type>
the type of channel
-charcoal <factor>
simulate a charcoal drawing
-chop <width>x<height>{+-}<x>{+-}<y>{%}
remove pixels from the interior of an image
-clip apply the clipping path, if one is present
-coalesce
merge a sequence of images
-colorize <value>
colorize the image with the pen color
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-compose <operator>
the type of image composition
-compress <type>
the type of image compression
-contrast
enhance or reduce the image contrast
-convolve <kernel>
convolve image with the specified convolution kernel
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-cycle <amount>
displace image colormap by amount
-debug <events>
enable debug printout
-deconstruct
break down an image sequence into constituent parts
-define <key>{=<value>},...
add coder/decoder specific options
-delay <1/100ths of a second>
display the next image after pausing
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-despeckle
reduce the speckles within an image
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-draw <string>
annotate an image with one or more graphic primitives
-edge <radius>
detect edges within an image
-emboss <radius>
emboss an image
-encoding <type>
specify the text encoding
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-enhance
apply a digital filter to enhance a noisy image
-equalize
perform histogram equalization to the image
-extent <width>x<height>{+-}<x>{+-}<y>
composite image on background color canvas image
-fill <color>
color to use when filling a graphic primitive
-filter <type>
use this type of filter when resizing an image
-flatten
flatten a sequence of images
-flip create a "mirror image"
-flop create a "mirror image"
-font <name>
use this font when annotating the image with text
-format <string>
output formatted image characteristics
-frame <width>x<height>+<outer bevel width>+<inner bevel width>
surround the image with an ornamental border
-fuzz <distance>{%}
colors within this Euclidean distance are considered equal
-gamma <value>
level of gamma correction
-gaussian <radius>{x<sigma>}
blur the image with a Gaussian operator
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-gravity <type>
direction primitive gravitates to when annotating the image.
-green-primary <x>,<y>
green chromaticity primary point
-hald-clut <clut>
apply a Hald CLUT to the image
-help print usage instructions
-implode <factor>
implode image pixels about the center
-intent <type>
use this type of rendering intent when managing the image color
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-lat <width>x<height>{+-}<offset>{%}
perform local adaptive thresholding
-level <black_point>{,<gamma>}{,<white_point>}{%}
adjust the level of image contrast
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-list <type>
the type of list
-log <string>
Specify format for debug log
-loop <iterations>
add Netscape loop extension to your GIF animation
-magnify
magnify the image
-map <filename>
choose a particular set of colors from this image
-mask <filename>
Specify a clipping mask
-matte store matte channel if the image has one
-mattecolor <color>
specify the color to be used with the -frame option
-median <radius>
apply a median filter to the image
-minify <factor>
minify the image
-modulate brightness[,saturation[,hue]]
vary the brightness, saturation, and hue of an image
-monitor
show progress indication
-monochrome
transform the image to black and white
-morph <frames>
morphs an image sequence
-mosaic
create a mosaic from an image or an image sequence
-motion-blur <radius>{x<sigma>}{+angle}
Simulate motion blur
-negate
replace every pixel with its complementary color
-noise <radius|type>
add or reduce noise in an image
-noop NOOP (no option)
-normalize
transform image to span the full range of color values
-opaque <color>
change this color to the pen color within the image
-operator channel operator rvalue[%]
apply a mathematical, bitwise, or value operator to an image channel
-ordered-dither <channeltype> <NxN>
ordered dither the image
-orient <orientation>
Set the image orientation attribute
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
-paint <radius>
simulate an oil painting
-pen <color>
(This option has been replaced by the -fill option)
-ping efficiently determine image characteristics
-pointsize <value>
pointsize of the PostScript, X11, or TrueType font
-preview <type>
image preview type
-process <command>
process a sequence of images using a process module
-profile <filename>
add ICM, IPTC, or generic profile to image
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-raise <width>x<height>
lighten or darken image edges
-random-threshold <channeltype> <LOWxHIGH>
random threshold the image
-recolor <matrix>
apply a color translation matrix to image channels
-red-primary <x>,<y>
red chromaticity primary point
-region <width>x<height>{+-}<x>{+-}<y>
apply options to a portion of the image
-render
render vector operations
-repage <width>x<height>+xoff+yoff[!]
Adjust image page offsets
-resample <horizontal>x<vertical>
Resample image to specified horizontal and vertical resolution
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
-roll {+-}<x>{+-}<y>
roll an image vertically or horizontally
-rotate <degrees>{<}{>}
rotate the image
-sample <geometry>
scale image using pixel sampling
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scale <geometry>
scale the image.
-scene <value>
set scene number
-set <attribute> <value>
set an image attribute
+set <attribute>
unset an image attribute
-segment <cluster threshold>x<smoothing threshold>
segment an image
-shade <azimuth>x<elevation>
shade the image using a distant light source
-sharpen <radius>{x<sigma>}
sharpen the image
-shave <width>x<height>{%}
shave pixels from the image edges
-shear <x degrees>x<y degrees>
shear the image along the X or Y axis
-size <width>x<height>{+offset}
width and height of the image
-solarize <factor>
negate all pixels above the threshold level
-spread <amount>
displace image pixels by a random amount
-strip remove all profiles and text attributes from the image
-stroke <color>
color to use when stroking a graphic primitive
-strokewidth <value>
set the stroke width
-swirl <degrees>
swirl image pixels about the center
-texture <filename>
name of texture to tile onto the image background
-threshold <value>{%}
threshold the image
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
-tile <filename>
tile image when filling a graphic primitive
-transform
transform the image
-transparent <color>
make this color transparent within the image
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-units <type>
the units of image resolution
-unsharp <radius>{x<sigma>}{+<amount>}{+<threshold>}
sharpen the image with an unsharp mask operator
-use-pixmap
use the pixmap
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-view <string>
FlashPix viewing parameters
-virtual-pixel <method>
specify contents of "virtual pixels"
-wave <amplitude>x<wavelength>
alter an image along a sine wave
-white-point <x>,<y>
chromaticity white point
-white-threshold red[,green][,blue][,opacity]
pixels above the threshold become white
-write <filename>
write an intermediate image [convert, composite]
For a more detailed description of each option, see Options, above.
GM DISPLAY
Display is a machine architecture independent image processing and display program. It can
display an image on any workstation screen running an X server. Display can read and write
many of the more popular image formats (e.g. JPEG, TIFF, PNM, Photo CD, etc.).
With display, you can perform these functions on an image:
o load an image from a file
o display the next image
o display the former image
o display a sequence of images as a slide show
o write the image to a file
o print the image to a PostScript printer
o delete the image file
o create a Visual Image Directory
o select the image to display by its thumbnail rather than name
o undo last image transformation
o copy a region of the image
o paste a region to the image
o restore the image to its original size
o refresh the image
o half the image size
o double the image size
o resize the image
o crop the image
o cut the image
o flop image in the horizontal direction
o flip image in the vertical direction
o rotate the image 90 degrees clockwise
o rotate the image 90 degrees counter-clockwise
o rotate the image
o shear the image
o roll the image
o trim the image edges
o invert the colors of the image
o vary the color brightness
o vary the color saturation
o vary the image hue
o gamma correct the image
o sharpen the image contrast
o dull the image contrast
o perform histogram equalization on the image
o perform histogram normalization on the image
o negate the image colors
o convert the image to grayscale
o set the maximum number of unique colors in the image
o reduce the speckles within an image
o eliminate peak noise from an image
o detect edges within the image
o emboss an image
o segment the image by color
o simulate an oil painting
o simulate a charcoal drawing
o annotate the image with text
o draw on the image
o edit an image pixel color
o edit the image matte information
o composite an image with another
o add a border to the image
o surround image with an ornamental border
o apply image processing techniques to a region of interest
o display information about the image
o zoom a portion of the image
o show a histogram of the image
o display image to background of a window
o set user preferences
o display information about this program
o discard all images and exit program
o change the level of magnification
o display images specified by a World Wide Web (WWW) uniform resource locator
(URL)
EXAMPLES
To scale an image of a cockatoo to exactly 640 pixels in width and 480 pixels in height
and position the window at location (200,200), use:
gm display -geometry 640x480+200+200! cockatoo.miff
To display an image of a cockatoo without a border centered on a backdrop, use:
gm display +borderwidth -backdrop cockatoo.miff
To tile a slate texture onto the root window, use:
gm display -size 1280x1024 -window root slate.png
To display a visual image directory of all your JPEG images, use:
gm display 'vid:*.jpg'
To display a MAP image that is 640 pixels in width and 480 pixels in height with 256
colors, use:
gm display -size 640x480+256 cockatoo.map
To display an image of a cockatoo specified with a World Wide Web (WWW) uniform resource
locator (URL), use:
gm display ftp://wizards.dupont.com/images/cockatoo.jpg
To display histogram of an image, use:
gm gm convert file.jpg HISTOGRAM:- | gm display -
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect until it is explicitly changed by specifying the option again with a
different effect. For example to display three images, the first with 32 colors, the
second with an unlimited number of colors, and the third with only 16 colors, use:
gm display -colors 32 cockatoo.miff -noop duck.miff
-colors 16 macaw.miff
Display options can appear on the command line or in your X resources file. See X(1).
Options on the command line supersede values specified in your X resources file.
For a more detailed description of each option, see Options, above.
-authenticate <string>
decrypt image with this password
-backdrop
display the image centered on a backdrop.
-background <color>
the background color
-border <width>x<height>
surround the image with a border of color
-bordercolor <color>
the border color
-borderwidth <geometry>
the border width
-colormap <type>
define the colormap type
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-compress <type>
the type of image compression
-contrast
enhance or reduce the image contrast
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-delay <1/100ths of a second>
display the next image after pausing
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-despeckle
reduce the speckles within an image
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-edge <radius>
detect edges within an image
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-enhance
apply a digital filter to enhance a noisy image
-filter <type>
use this type of filter when resizing an image
-flip create a "mirror image"
-flop create a "mirror image"
-font <name>
use this font when annotating the image with text
-foreground <color>
define the foreground color
-frame <width>x<height>+<outer bevel width>+<inner bevel width>
surround the image with an ornamental border
-gamma <value>
level of gamma correction
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-help print usage instructions
-iconGeometry <geometry>
specify the icon geometry
-iconic
iconic animation
-immutable
make image immutable
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-magnify <factor>
magnify the image
-map <type>
display image using this type.
-matte store matte channel if the image has one
-mattecolor <color>
specify the color to be used with the -frame option
-monitor
show progress indication
-monochrome
transform the image to black and white
-name name an image
-negate
replace every pixel with its complementary color
-noop NOOP (no option)
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
+progress
disable progress monitor and busy cursor
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-raise <width>x<height>
lighten or darken image edges
-remote
perform a X11 remote operation
-roll {+-}<x>{+-}<y>
roll an image vertically or horizontally
-rotate <degrees>{<}{>}
rotate the image
-sample <geometry>
scale image using pixel sampling
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scenes <value-value>
range of image scene numbers to read
-set <attribute> <value>
set an image attribute
+set <attribute>
unset an image attribute
-segment <cluster threshold>x<smoothing threshold>
segment an image
-shared-memory
use shared memory
-sharpen <radius>{x<sigma>}
sharpen the image
-size <width>x<height>{+offset}
width and height of the image
-text-font <name>
font for writing fixed-width text
-texture <filename>
name of texture to tile onto the image background
-title <string>
assign title to displayed image [animate, display, montage]
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-update <seconds>
detect when image file is modified and redisplay.
-use-pixmap
use the pixmap
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-visual <type>
animate images using this X visual type
-window <id>
make image the background of a window
-window-group
specify the window group
-write <filename>
write the image to a file [display]
For a more detailed description of each option, see Options, above.
MOUSE BUTTONS
The effects of each button press is described below. Three buttons are required. If you
have a two button mouse, button 1 and 3 are returned. Press ALT and button 3 to simulate
button 2.
1 Press this button to map or unmap the Command widget . See the next section for
more information about the Command widget.
2 Press and drag to define a region of the image to magnify.
3 Press and drag to choose from a select set of display(1) commands. This button
behaves differently if the image being displayed is a visual image directory.
Choose a particular tile of the directory and press this button and drag to select
a command from a pop-up menu. Choose from these menu items:
Open
Next
Former
Delete
Update
If you choose Open, the image represented by the tile is displayed. To return to
the visual image directory, choose Next from the Command widget (refer to Command
Widget). Next and Former moves to the next or former image respectively. Choose
Delete to delete a particular image tile. Finally, choose Update to synchronize all
the image tiles with their respective images. See montage and miff for more
details.
COMMAND WIDGET
The Command widget lists a number of sub-menus and commands. They are
File
Open...
Next
Former
Select...
Save...
Print...
Delete...
Canvas...
Visual Directory...
Quit
Edit
Undo
Redo
Cut
Copy
Paste
View
Half Size
Original Size
Double Size
Resize...
Apply
Refresh
Restore
Transform
Crop
Chop
Flop
Flip
Rotate Right
Rotate Left
Rotate...
Shear...
Roll...
Trim Edges
Enhance
Hue...
Saturation...
Brightness...
Gamma...
Spiff...
Dull
Equalize
Normalize
Negate
GRAYscale
Quantize...
Effects
Despeckle
Emboss
Reduce Noise
Add Noise
Sharpen...
Blur...
Threshold...
Edge Detect...
Spread...
Shade...
Raise...
Segment...
F/X
Solarize...
Swirl...
Implode...
Wave...
Oil Paint...
Charcoal Draw...
Image Edit
Annotate...
Draw...
Color...
Matte...
Composite...
Add Border...
Add Frame...
Comment...
Launch...
Region of Interest...
Miscellany
Image Info
Zoom Image
Show Preview...
Show Histogram
Show Matte
Background...
Slide Show
Preferences...
Help
Overview
Browse Documentation
About Display
Menu items with a indented triangle have a sub-menu. They are represented above as the
indented items. To access a sub-menu item, move the pointer to the appropriate menu and
press button 1 and drag. When you find the desired sub-menu item, release the button and
the command is executed. Move the pointer away from the sub-menu if you decide not to
execute a particular command.
KEYBOARD ACCELERATORS
Accelerators are one or two key presses that effect a particular command. The keyboard
accelerators that display understands is:
Ctl+O Press to load an image from a file.
space Press to display the next image.
If the image is a multi-paged document such as a PostScript document, you can skip ahead
several pages by preceding this command with a number. For example to display the fourth
page beyond the current page, press 4space.
backspace Press to display the former image.
If the image is a multi-paged document such as a PostScript document, you can skip behind
several pages by preceding this command with a number. For example to display the fourth
page preceding the current page, press 4n.
Ctl-S Press to save the image to a file.
Ctl-P Press to print the image to a
PostScript printer.
Ctl-D Press to delete an image file.
Ctl-N Press to create a blank canvas.
Ctl-Q Press to discard all images and exit program.
Ctl+Z Press to undo last image transformation.
Ctl+R Press to redo last image transformation.
Ctl-X Press to cut a region of
the image.
Ctl-C Press to copy a region of
the image.
Ctl-V Press to paste a region to
the image.
< Press to halve the image size.
. Press to return to the original image size.
> Press to double the image size.
% Press to resize the image to a width and height
you specify.
Cmd-A Press to make any image transformations
permanent.
By default, any image size transformations are
applied to the original image to create the
image displayed on the X server. However, the
transformations are not permanent (i.e. the
original image does not change size only the
X image does). For example, if you press ">"
the X image will appear to double in size, but
the original image will in fact remain the same
size. To force the original image to double in
size, press ">" followed by "Cmd-A".
@ Press to refresh the image window.
C Press to crop the image.
[ Press to chop the image.
H Press to flop image in the horizontal direction.
V Press to flip image in the vertical direction.
/ Press to rotate the image 90 degrees clockwise.
\ Press to rotate the image 90 degrees
counter-clockwise.
* Press to rotate the image
the number of degrees you specify.
S Press to shear the image the number of degrees
you specify.
R Press to roll the image.
T Press to trim the image edges.
Shft-H Press to vary the color hue.
Shft-S Press to vary the color saturation.
Shft-L Press to vary the image brightness.
Shft-G Press to gamma correct the image.
Shft-C Press to spiff up the image contrast.
Shft-Z Press to dull the image contrast.
= Press to perform histogram equalization on
the image.
Shft-N Press to perform histogram normalization on
the image.
Shft-~ Press to negate the colors of the image.
. Press to convert the image colors to gray.
Shft-# Press to set the maximum number of unique
colors in the image.
F2 Press to reduce the speckles in an image.
F2 Press to emboss an image.
F4 Press to eliminate peak noise from an image.
F5 Press to add noise to an image.
F6 Press to sharpen an image.
F7 Press to blur image an image.
F8 Press to threshold the image.
F9 Press to detect edges within an image.
F10 Press to displace pixels by a random amount.
F11 Press to shade the image using a distant light
source.
F12 Press to lighten or darken image edges to
create a 3-D effect.
F13 Press to segment the image by color.
Meta-S Press to swirl image pixels about the center.
Meta-I Press to implode image pixels about the center.
Meta-W Press to alter an image along a sine wave.
Meta-P Press to simulate an oil painting.
Meta-C Press to simulate a charcoal drawing.
Alt-X Press to composite the image
with another.
Alt-A Press to annotate the image with text.
Alt-D Press to draw a line on the image.
Alt-P Press to edit an image pixel color.
Alt-M Press to edit the image matte information.
Alt-X Press to composite the image with another.
Alt-A Press to add a border to the image.
Alt-F Press to add a ornamental frame to the image.
Alt-Shft-! Press to add an image comment.
Ctl-A Press to apply image processing techniques to a
region of interest.
Shft-? Press to display information about the image.
Shft-+ Press to map the zoom image window.
Shft-P Press to preview an image enhancement, effect,
or f/x.
F1 Press to display helpful information about
the "display" utility.
Find Press to browse documentation about
GraphicsMagick.
1-9 Press to change the level of magnification.
Use the arrow keys to move the image one pixel up, down, left, or right within the magnify
window. Be sure to first map the magnify window by pressing button 2.
Press ALT and one of the arrow keys to trim off one pixel from any side of the image.
X RESOURCES
Display options can appear on the command line or in your X resource file. Options on the
command line supersede values specified in your X resource file. See X(1) for more
information on X resources.
Most display options have a corresponding X resource. In addition, display uses the
following X resources:
background (class Background)
Specifies the preferred color to use for the Image window background. The default
is #ccc.
borderColor (class BorderColor)
Specifies the preferred color to use for the Image window border. The default is
#ccc.
borderWidth (class BorderWidth)
Specifies the width in pixels of the image window border. The default is 2.
browseCommand (class browseCommand)
Specifies the name of the preferred browser when displaying GraphicsMagick
documentation. The default is netscape %s.
confirmExit (class ConfirmExit)
Display pops up a dialog box to confirm exiting the program when exiting the
program. Set this resource to False to exit without a confirmation.
displayGamma (class DisplayGamma)
Specifies the gamma of the X server. You can apply separate gamma values to the
red, green, and blue channels of the image with a gamma value list delineated with
slashes (i.e. 1.7/2.3/1.2). The default is 2.2.
displayWarnings (class DisplayWarnings)
Display pops up a dialog box whenever a warning message occurs. Set this resource
to False to ignore warning messages.
font (class FontList)
Specifies the name of the preferred font to use in normal formatted text. The
default is 14 point Helvetica.
font[1-9] (class Font[1-9])
Specifies the name of the preferred font to use when annotating the image window
with text. The default fonts are fixed, variable, 5x8, 6x10, 7x13bold, 8x13bold,
9x15bold, 10x20, and 12x24.
foreground (class Foreground)
Specifies the preferred color to use for text within the image window. The
default is black.
gammaCorrect (class gammaCorrect)
This resource, if true, will lighten or darken an image of known gamma to match
the gamma of the display (see resource displayGamma). The default is True.
geometry (class Geometry)
Specifies the preferred size and position of the image window. It is not
necessarily obeyed by all window managers.
Offsets, if present, are handled in X(1) style. A negative x offset is measured
from the right edge of the screen to the right edge of the icon, and a negative y
offset is measured from the bottom edge of the screen to the bottom edge of the
icon.
iconGeometry (class IconGeometry)
Specifies the preferred size and position of the application when iconified. It
is not necessarily obeyed by all window managers.
Offsets, if present, are handled in the same manner as in class Geometry.
iconic (class Iconic)
This resource indicates that you would prefer that the application's windows
initially not be visible as if the windows had be immediately iconified by you.
Window managers may choose not to honor the application's request.
magnify (class Magnify)
specifies an integral factor by which the image should be enlarged. The default is
3. This value only affects the magnification window which is invoked with button
number 3 after the image is displayed.
matteColor (class MatteColor)
Specify the color of windows. It is used for the backgrounds of windows, menus,
and notices. A 3D effect is achieved by using highlight and shadow colors derived
from this color. Default value: #697B8F.
name (class Name)
This resource specifies the name under which resources for the application should
be found. This resource is useful in shell aliases to distinguish between
invocations of an application, without resorting to creating links to alter the
executable file name. The default is the application name.
pen[1-9] (class Pen[1-9])
Specifies the color of the preferred font to use when annotating the image window
with text. The default colors are black, blue, green, cyan, gray, red, magenta,
yellow, and white.
printCommand (class PrintCommand)
This command is executed whenever Print is issued. In general, it is the command
to print PostScript to your printer. Default value: lp -c -s %i.
sharedMemory (class SharedMemory)
This resource specifies whether display should attempt use shared memory for
pixmaps. GraphicsMagick must be compiled with shared memory support, and the
display must support the MIT-SHM extension. Otherwise, this resource is ignored.
The default is True.
textFont (class textFont)
Specifies the name of the preferred font to use in fixed (typewriter style)
formatted text. The default is 14 point Courier.
title (class Title)
This resource specifies the title to be used for the image window. This
information is sometimes used by a window manager to provide a header identifying
the window. The default is the image file name.
undoCache (class UndoCache)
Specifies, in mega-bytes, the amount of memory in the undo edit cache. Each time
you modify the image it is saved in the undo edit cache as long as memory is
available. You can subsequently undo one or more of these transformations. The
default is 16 Megabytes.
usePixmap (class UsePixmap)
Images are maintained as a XImage by default. Set this resource to True to utilize
a server Pixmap instead. This option is useful if your image exceeds the dimensions
of your server screen and you intend to pan the image. Panning is much faster with
Pixmaps than with a XImage. Pixmaps are considered a precious resource, use them
with discretion.
To set the geometry of the Magnify or Pan or window, use the geometry resource.
For example, to set the Pan window geometry to 256x256, use:
gm display.pan.geometry: 256x256
IMAGE LOADING
To select an image to display, choose Open of the File sub-menu from the Command widget. A
file browser is displayed. To choose a particular image file, move the pointer to the
filename and press any button. The filename is copied to the text window. Next, press Open
or press the RETURN key. Alternatively, you can type the image file name directly into the
text window. To descend directories, choose a directory name and press the button twice
quickly. A scrollbar allows a large list of filenames to be moved through the viewing area
if it exceeds the size of the list area.
You can trim the list of file names by using shell globbing characters. For example, type
*.jpg to list only files that end with .jpg.
To select your image from the X server screen instead of from a file, Choose Grab of the
Open widget.
VISUAL IMAGE DIRECTORY
To create a Visual Image Directory, choose Visual Directory of the File sub-menu from the
Command widget . A file browser is displayed. To create a Visual Image Directory from all
the images in the current directory, press Directory or press the RETURN key.
Alternatively, you can select a set of image names by using shell globbing characters. For
example, type *.jpg to include only files that end with .jpg. To descend directories,
choose a directory name and press the button twice quickly. A scrollbar allows a large
list of filenames to be moved through the viewing area if it exceeds the size of the list
area.
After you select a set of files, they are turned into thumbnails and tiled onto a single
image. Now move the pointer to a particular thumbnail and press button 3 and drag.
Finally, select Open. The image represented by the thumbnail is displayed at its full
size. Choose Next from the File sub-menu of the Command widget to return to the Visual
Image Directory.
IMAGE CUTTING
Note that cut information for image window is not retained for colormapped X server
visuals (e.g. StaticColor, StaticColor, GRAYScale, PseudoColor). Correct cutting behavior
may require a TrueColor or DirectColor visual or a Standard Colormap.
To begin, press choose Cut of the Edit sub-menu from the Command widget. Alternatively,
press F3 in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in cut mode. In cut mode, the Command widget has these options:
Help
Dismiss
To define a cut region, press button 1 and drag. The cut region is defined by a
highlighted rectangle that expands or contracts as it follows the pointer. Once you are
satisfied with the cut region, release the button. You are now in rectify mode. In
rectify mode, the Command widget has these options:
Cut
Help
Dismiss
You can make adjustments by moving the pointer to one of the cut rectangle corners,
pressing a button, and dragging. Finally, press Cut to commit your copy region. To exit
without cutting the image, press Dismiss.
IMAGE COPYING
To begin, press choose Copy of the Edit sub-menu from the Command widget. Alternatively,
press F4 in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in copy mode. In copy mode, the Command widget has these options:
Help
Dismiss
To define a copy region, press button 1 and drag. The copy region is defined by a
highlighted rectangle that expands or contracts as it follows the pointer. Once you are
satisfied with the copy region, release the button. You are now in rectify mode. In
rectify mode, the Command widget has these options:
Copy
Help
Dismiss
You can make adjustments by moving the pointer to one of the copy rectangle corners,
pressing a button, and dragging. Finally, press Copy to commit your copy region. To exit
without copying the image, press Dismiss.
IMAGE PASTING
To begin, press choose Paste of the Edit sub-menu from the Command widget. Alternatively,
press F5 in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in Paste mode. To exit immediately, press Dismiss. In Paste mode, the Command widget has
these options:
Operators
over
in
out
atop
xor
plus
minus
add
subtract
difference
multiply
bumpmap
replace
Help
Dismiss
Choose a composite operation from the Operators sub-menu of the Command widget. How each
operator behaves is described below. image window is the image currently displayed on your
X server and image is the image obtained with the File Browser widget.
over The result is the union of the two image shapes, with image obscuring image window
in the region of overlap.
in The result is simply image cut by the shape of image window. None of the image
data of image window is in the result.
out The resulting image is image with the shape of image window cut out.
atop The result is the same shape as image window, with image obscuring image window
where the image shapes overlap. Note this differs from over because the portion of
image outside image window's shape does not appear in the result.
xor The result is the image data from both image and image window that is outside the
overlap region. The overlap region is blank.
plus The result is just the sum of the image data. Output values are cropped to the
maximum value (no overflow). This operation is independent of the matte channels.
minus The result of image - image window, with underflow cropped to zero. The matte
channel is ignored (set to opaque, full coverage).
add The result of image + image window, with overflow wrapping around (mod MaxRGB+1).
subtract
The result of image - image window, with underflow wrapping around (mod MaxRGB+1).
The add and subtract operators can be used to perform reversible transformations.
difference
The result of abs(image - image window). This is useful for comparing two very
similar images.
multiply
The result of image * image window. This is useful for the creation of drop-
shadows.
bumpmap
The result of image window shaded by window.
replace
The resulting image is image window replaced with image. Here the matte
information is ignored.
The image compositor requires a matte, or alpha channel in the image for some
operations. This extra channel usually defines a mask which represents a sort of a
cookie-cutter for the image. This is the case when matte is 255 (full coverage) for
pixels inside the shape, zero outside, and between zero and 255 on the boundary. If
image does not have a matte channel, it is initialized with 0 for any pixel
matching in color to pixel location (0,0), otherwise 255. See Matte Editing for a
method of defining a matte channel.
Note that matte information for image window is not retained for colormapped X
server visuals (e.g. StaticColor, StaticColor, GrayScale, PseudoColor). Correct
compositing behavior may require a TrueColor or DirectColor visual or a Standard
Colormap.
Choosing a composite operator is optional. The default operator is replace.
However, you must choose a location to composite your image and press button 1.
Press and hold the button before releasing and an outline of the image will appear
to help you identify your location.
The actual colors of the pasted image is saved. However, the color that appears in
image window may be different. For example, on a monochrome screen image window
will appear black or white even though your pasted image may have many colors. If
the image is saved to a file it is written with the correct colors. To assure the
correct colors are saved in the final image, any PseudoClass image is promoted to
DirectClass. To force a PseudoClass image to remain PseudoClass, use -colors.
IMAGE CROPPING
To begin, press choose Crop of the Transform submenu from the Command widget.
Alternatively, press C in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in crop mode. In crop mode, the Command widget has these options:
Help
Dismiss
To define a cropping region, press button 1 and drag. The cropping region is defined by a
highlighted rectangle that expands or contracts as it follows the pointer. Once you are
satisfied with the cropping region, release the button. You are now in rectify mode. In
rectify mode, the Command widget has these options:
Crop
Help
Dismiss
You can make adjustments by moving the pointer to one of the cropping rectangle corners,
pressing a button, and dragging. Finally, press Crop to commit your cropping region. To
exit without cropping the image, press Dismiss.
IMAGE CHOPPING
An image is chopped interactively. There is no command line argument to chop an image. To
begin, choose Chop of the Transform sub-menu from the Command widget. Alternatively, press
[ in the Image window.
You are now in Chop mode. To exit immediately, press Dismiss. In Chop mode, the Command
widget has these options:
Direction
horizontal
vertical
Help
Dismiss
If the you choose the horizontal direction (this is the default), the area of the image
between the two horizontal endpoints of the chop line is removed. Otherwise, the area of
the image between the two vertical endpoints of the chop line is removed.
Select a location within the image window to begin your chop, press and hold any button.
Next, move the pointer to another location in the image. As you move a line will connect
the initial location and the pointer. When you release the button, the area within the
image to chop is determined by which direction you choose from the Command widget.
To cancel the image chopping, move the pointer back to the starting point of the line and
release the button.
IMAGE ROTATION
Press the / key to rotate the image 90 degrees or \ to rotate -90 degrees. To
interactively choose the degree of rotation, choose Rotate... of the Transform submenu
from the Command Widget. Alternatively, press * in the image window.
A small horizontal line is drawn next to the pointer. You are now in rotate mode. To exit
immediately, press Dismiss. In rotate mode, the Command widget has these options:
Pixel Color
black
blue
cyan
green
gray
red
magenta
yellow
white
Browser...
Direction
horizontal
vertical
Help
Dismiss
Choose a background color from the Pixel Color sub-menu. Additional background colors can
be specified with the color browser. You can change the menu colors by setting the X
resources pen1 through pen9.
If you choose the color browser and press Grab, you can select the background color by
moving the pointer to the desired color on the screen and press any button.
Choose a point in the image window and press this button and hold. Next, move the pointer
to another location in the image. As you move a line connects the initial location and the
pointer. When you release the button, the degree of image rotation is determined by the
slope of the line you just drew. The slope is relative to the direction you choose from
the Direction sub-menu of the Command widget.
To cancel the image rotation, move the pointer back to the starting point of the line and
release the button.
IMAGE ANNOTATION
An image is annotated interactively. There is no command line argument to annotate an
image. To begin, choose Annotate of the Image Edit sub-menu from the Command widget.
Alternatively, press a in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in annotate mode. To exit immediately, press Dismiss. In annotate mode, the Command
widget has these options:
Font Name
fixed
variable
5x8
6x10
7x13bold
8x13bold
9x15bold
10x20
12x24
Browser...
Font Color
black
blue
cyan
green
gray
red
magenta
yellow
white
transparent
Browser...
Box Color
black
blue
cyan
green
gray
red
magenta
yellow
white
transparent
Browser...
Rotate Text
-90
-45
-30
0
30
45
90
180
Dialog...
Help
Dismiss
Choose a font name from the Font Name sub-menu. Additional font names can be specified
with the font browser. You can change the menu names by setting the X resources font1
through font9.
Choose a font color from the Font Color sub-menu. Additional font colors can be specified
with the color browser. You can change the menu colors by setting the X resources pen1
through pen9.
If you select the color browser and press Grab, you can choose the font color by moving
the pointer to the desired color on the screen and press any button.
If you choose to rotate the text, choose Rotate Text from the menu and select an angle.
Typically you will only want to rotate one line of text at a time. Depending on the angle
you choose, subsequent lines may end up overwriting each other.
Choosing a font and its color is optional. The default font is fixed and the default color
is black. However, you must choose a location to begin entering text and press a button.
An underscore character will appear at the location of the pointer. The cursor changes to
a pencil to indicate you are in text mode. To exit immediately, press Dismiss.
In text mode, any key presses will display the character at the location of the underscore
and advance the underscore cursor. Enter your text and once completed press Apply to
finish your image annotation. To correct errors press BACK SPACE. To delete an entire line
of text, press DELETE. Any text that exceeds the boundaries of the image window is
automatically continued onto the next line.
The actual color you request for the font is saved in the image. However, the color that
appears in your Image window may be different. For example, on a monochrome screen the
text will appear black or white even if you choose the color red as the font color.
However, the image saved to a file with -write is written with red lettering. To assure
the correct color text in the final image, any PseudoClass image is promoted to
DirectClass (see miff(5)). To force a PseudoClass image to remain PseudoClass, use
-colors.
IMAGE COMPOSITING
An image composite is created interactively. There is no command line argument to
composite an image. To begin, choose Composite of the Image Edit from the Command widget.
Alternatively, press x in the Image window.
First a popup window is displayed requesting you to enter an image name. Press Composite,
Grab or type a file name. Press Cancel if you choose not to create a composite image. When
you choose Grab, move the pointer to the desired window and press any button.
If the Composite image does not have any matte information, you are informed and the file
browser is displayed again. Enter the name of a mask image. The image is typically
grayscale and the same size as the composite image. If the image is not grayscale, it is
converted to grayscale and the resulting intensities are used as matte information.
A small window appears showing the location of the cursor in the image window. You are now
in composite mode. To exit immediately, press Dismiss. In composite mode, the Command
widget has these options:
Operators
over
in
out
atop
xor
plus
minus
add
subtract
difference
bumpmap
replace
Blend
Displace
Help
Dismiss
Choose a composite operation from the Operators sub-menu of the Command widget. How each
operator behaves is described below. image window is the image currently displayed on your
X server and image is the image obtained
over The result is the union of the two image shapes, with image obscuring image window
in the region of overlap.
in The result is simply image cut by the shape of image window. None of the image
data of image window is in the result.
out The resulting image is image with the shape of image window cut out.
atop The result is the same shape as image window, with image obscuring image window
where the image shapes overlap. Note this differs from over because the portion of
image outside image window's shape does not appear in the result.
xor The result is the image data from both image and image window that is outside the
overlap region. The overlap region is blank.
plus The result is just the sum of the image data. Output values are cropped to 255 (no
overflow). This operation is independent of the matte channels.
minus The result of image - image window, with underflow cropped to zero. The matte
channel is ignored (set to 255, full coverage).
add The result of image + image window, with overflow wrapping around (mod 256).
subtract
The result of image - image window, with underflow wrapping around (mod 256). The
add and subtract operators can be used to perform reversible transformations.
difference
The result of abs(image - image window). This is useful for comparing two very
similar images.
bumpmap
The result of image window shaded by window.
replace
The resulting image is image window replaced with image. Here the matte
information is ignored.
The image compositor requires a matte, or alpha channel in the image for some
operations. This extra channel usually defines a mask which represents a sort of a
cookie-cutter for the image. This is the case when matte is 255 (full coverage) for
pixels inside the shape, zero outside, and between zero and 255 on the boundary. If
image does not have a matte channel, it is initialized with 0 for any pixel
matching in color to pixel location (0,0), otherwise 255. See Matte Editing for a
method of defining a matte channel.
If you choose blend, the composite operator becomes over. The image matte channel
percent transparency is initialized to factor. The image window is initialized to
(100-factor). Where factor is the value you specify in the Dialog widget.
Displace shifts the image pixels as defined by a displacement map. With this
option, image is used as a displacement map. Black, within the displacement map, is
a maximum positive displacement. White is a maximum negative displacement and
middle gray is neutral. The displacement is scaled to determine the pixel shift. By
default, the displacement applies in both the horizontal and vertical directions.
However, if you specify mask, image is the horizontal X displacement and mask the
vertical Y displacement.
Note that matte information for image window is not retained for colormapped X
server visuals (e.g. StaticColor, StaticColor, GrayScale, PseudoColor). Correct
compositing behavior may require a TrueColor or DirectColor visual or a Standard
Colormap.
Choosing a composite operator is optional. The default operator is replace.
However, you must choose a location to composite your image and press button 1.
Press and hold the button before releasing and an outline of the image will appear
to help you identify your location.
The actual colors of the composite image is saved. However, the color that appears
in image window may be different. For example, on a monochrome screen Image window
will appear black or white even though your composited image may have many colors.
If the image is saved to a file it is written with the correct colors. To assure
the correct colors are saved in the final image, any PseudoClass image is promoted
to DirectClass (see miff). To force a PseudoClass image to remain PseudoClass, use
-colors.
COLOR EDITING
Changing the the color of a set of pixels is performed interactively. There is no command
line argument to edit a pixel. To begin, choose Color from the Image Edit submenu of the
Command widget. Alternatively, press c in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in color edit mode. To exit immediately, press Dismiss. In color edit mode, the Command
widget has these options:
Method
point
replace
floodfill
reset
Pixel Color
black
blue
cyan
green
gray
red
magenta
yellow
white
Browser...
Border Color
black
blue
cyan
green
gray
red
magenta
yellow
white
Browser...
Fuzz
0
2
4
8
16
Dialog...
Undo
Help
Dismiss
Choose a color editing method from the Method sub-menu of the Command widget. The point
method recolors any pixel selected with the pointer unless the button is released. The
replace method recolors any pixel that matches the color of the pixel you select with a
button press. Floodfill recolors any pixel that matches the color of the pixel you select
with a button press and is a neighbor. Whereas filltoborder changes the matte value of
any neighbor pixel that is not the border color. Finally reset changes the entire image
to the designated color.
Next, choose a pixel color from the Pixel Color sub-menu. Additional pixel colors can be
specified with the color browser. You can change the menu colors by setting the X
resources pen1 through pen9.
Now press button 1 to select a pixel within the Image window to change its color.
Additional pixels may be recolored as prescribed by the method you choose. additional
pixels by increasing the Delta value.
If the Magnify widget is mapped, it can be helpful in positioning your pointer within the
image (refer to button 2). Alternatively you can select a pixel to recolor from within the
Magnify widget. Move the pointer to the Magnify widget and position the pixel with the
cursor control keys. Finally, press a button to recolor the selected pixel (or pixels).
The actual color you request for the pixels is saved in the image. However, the color that
appears in your Image window may be different. For example, on a monochrome screen the
pixel will appear black or white even if you choose the color red as the pixel color.
However, the image saved to a file with -write is written with red pixels. To assure the
correct color text in the final image, any PseudoClass image is promoted to DirectClass To
force a PseudoClass image to remain PseudoClass, use -colors.
MATTE EDITING
Matte information within an image is useful for some operations such as image compositing.
This extra channel usually defines a mask which represents a sort of a cookie-cutter for
the image. This is the case when matte is 255 (full coverage) for pixels inside the shape,
zero outside, and between zero and 255 on the boundary.
Setting the matte information in an image is done interactively. There is no command line
argument to edit a pixel. To begin, and choose Matte of the Image Edit sub-menu from the
Command widget.
Alternatively, press m in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in matte edit mode. To exit immediately, press Dismiss. In matte edit mode, the Command
widget has these options:
Method
point
replace
floodfill
reset
Border Color
black
blue
cyan
green
gray
red
magenta
yellow
white
Browser...
Fuzz
0
2
4
8
16
Dialog...
Matte
Undo
Help
Dismiss
Choose a matte editing method from the Method sub-menu of the Command widget. The point
method changes the matte value of the any pixel selected with the pointer until the button
is released. The replace method changes the matte value of any pixel that matches the
color of the pixel you select with a button press. Floodfill changes the matte value of
any pixel that matches the color of the pixel you select with a button press and is a
neighbor. Whereas filltoborder recolors any neighbor pixel that is not the border color.
Finally reset changes the entire image to the designated matte value. Choose Matte Value
and a dialog appears requesting a matte value. Enter a value between 0 and 255. This
value is assigned as the matte value of the selected pixel or pixels. Now, press any
button to select a pixel within the Image window to change its matte value. You can change
the matte value of additional pixels by increasing the Delta value. The Delta value is
first added then subtracted from the red, green, and blue of the target color. Any pixels
within the range also have their matte value updated. If the Magnify widget is mapped, it
can be helpful in positioning your pointer within the image (refer to button 2).
Alternatively you can select a pixel to change the matte value from within the Magnify
widget. Move the pointer to the Magnify widget and position the pixel with the cursor
control keys. Finally, press a button to change the matte value of the selected pixel (or
pixels). Matte information is only valid in a DirectClass image. Therefore, any
PseudoClass image is promoted to DirectClass. Note that matte information for PseudoClass
is not retained for colormapped X server visuals (e.g. StaticColor, StaticColor,
GrayScale, PseudoColor) unless you immediately save your image to a file (refer to Write).
Correct matte editing behavior may require a TrueColor or DirectColor visual or a Standard
Colormap.
IMAGE DRAWING
An image is drawn upon interactively. There is no command line argument to draw on an
image. To begin, choose Draw of the Image Edit sub-menu from the Command widget.
Alternatively, press d in the image window.
The cursor changes to a crosshair to indicate you are in draw mode. To exit immediately,
press Dismiss. In draw mode, the Command widget has these options:
Primitive
point
line
rectangle
fill rectangle
circle
fill circle
ellipse
fill ellipse
polygon
fill polygon
Color
black
blue
cyan
green
gray
red
magenta
yellow
white
transparent
Browser...
Stipple
Brick
Diagonal
Scales
Vertical
Wavy
Translucent
Opaque
Open...
Width
1
2
4
8
16
Dialog...
Undo
Help
Dismiss
Choose a drawing primitive from the Primitive sub-menu.
Next, choose a color from the Color sub-menu. Additional colors can be specified with the
color browser. You can change the menu colors by setting the X resources pen1 through
pen9. The transparent color updates the image matte channel and is useful for image
compositing.
If you choose the color browser and press Grab, you can select the primitive color by
moving the pointer to the desired color on the screen and press any button. The
transparent color updates the image matte channel and is useful for image compositing.
Choose a stipple, if appropriate, from the Stipple sub-menu. Additional stipples can be
specified with the file browser. Stipples obtained from the file browser must be on disk
in the X11 bitmap format.
Choose a line width, if appropriate, from the Width sub-menu. To choose a specific width
select the Dialog widget.
Choose a point in the image window and press button 1 and hold. Next, move the pointer to
another location in the image. As you move, a line connects the initial location and the
pointer. When you release the button, the image is updated with the primitive you just
drew. For polygons, the image is updated when you press and release the button without
moving the pointer.
To cancel image drawing, move the pointer back to the starting point of the line and
release the button.
REGION OF INTEREST
To begin, press choose Region of Interest of the Pixel Transform sub-menu from the Command
widget. Alternatively, press R in the image window.
A small window appears showing the location of the cursor in the image window. You are now
in region of interest mode. In region of interest mode, the Command widget has these
options:
Help
Dismiss
To define a region of interest, press button 1 and drag. The region of interest is defined
by a highlighted rectangle that expands or contracts as it follows the pointer. Once you
are satisfied with the region of interest, release the button. You are now in apply mode.
In apply mode the Command widget has these options:
File
Save...
Print...
Edit
Undo
Redo
Transform
Flip
Flop
Rotate Right
Rotate Left
Enhance
Hue...
Saturation...
Brightness...
Gamma...
Spiff
Dull
Equalize
Normalize
Negate
GRAYscale
Quantize...
Effects
Despeckle
Emboss
Reduce Noise
Add Noise
Sharpen...
Blur...
Threshold...
Edge Detect...
Spread...
Shade...
Raise...
Segment...
F/X
Solarize...
Swirl...
Implode...
Wave...
Oil Paint
Charcoal Draw...
Miscellany
Image Info
Zoom Image
Show Preview...
Show Histogram
Show Matte
Help
Dismiss
You can make adjustments to the region of interest by moving the pointer to one of the
rectangle corners, pressing a button, and dragging. Finally, choose an image processing
technique from the Command widget. You can choose more than one image processing technique
to apply to an area. Alternatively, you can move the region of interest before applying
another image processing technique. To exit, press Dismiss.
IMAGE PANNING
When an image exceeds the width or height of the X server screen, display maps a small
panning icon. The rectangle within the panning icon shows the area that is currently
displayed in the the image window. To pan about the image, press any button and drag the
pointer within the panning icon. The pan rectangle moves with the pointer and the image
window is updated to reflect the location of the rectangle within the panning icon. When
you have selected the area of the image you wish to view, release the button.
Use the arrow keys to pan the image one pixel up, down, left, or right within the image
window.
The panning icon is withdrawn if the image becomes smaller than the dimensions of the X
server screen.
USER PREFERENCES
Preferences affect the default behavior of display(1). The preferences are either true or
false and are stored in your home directory as .displayrc:
display image centered on a backdrop"
This backdrop covers the entire workstation screen and is useful for hiding
other X window activity while viewing the image. The color of the backdrop is
specified as the background color. Refer to X Resources for details.
confirm on program exit"
Ask for a confirmation before exiting the display(1) program.
correct image for display gamma"
If the image has a known gamma, the gamma is corrected to match that of the X
server (see the X Resource displayGamma).
display warning messages"
Display any warning messages.
apply Floyd/Steinberg error diffusion to image"
The basic strategy of dithering is to trade intensity resolution for spatial
resolution by averaging the intensities of several neighboring pixels.
Images which suffer from severe contouring when reducing colors can be
improved with this preference.
use a shared colormap for colormapped X visuals"
This option only applies when the default X server visual is PseudoColor or
GRAYScale. Refer to -visual for more details. By default, a shared colormap
is allocated. The image shares colors with other X clients. Some image
colors could be approximated, therefore your image may look very different
than intended. Otherwise the image colors appear exactly as they are defined.
However, other clients may go technicolor when the image colormap is
installed.
display images as an X server pixmap"
Images are maintained as a XImage by default. Set this resource to True to
utilize a server Pixmap instead. This option is useful if your image exceeds
the dimensions of your server screen and you intend to pan the image. Panning
is much faster with Pixmaps than with a XImage. Pixmaps are considered a
precious resource, use them with discretion.
GM IDENTIFY
Identify describes the format and characteristics of one or more image files as
internally supported by the software. It will also report if an image is incomplete
or corrupt. The information displayed includes the scene number, the file name,
the width and height of the image, whether the image is colormapped or not, the
number of colors in the image, the number of bytes in the image, the format of the
image (JPEG, PNM, etc.), and finally the number of seconds in both user time and
elapsed time it took to read and process the image. If -verbose or +ping are
provided as an option, the pixel read rate is also displayed. An example line
output from identify follows:
images/aquarium.miff 640x480 PseudoClass 256c
308135b MIFF 0.000u 0:01
If -verbose is set, expect additional output including any image comment:
Image: images/aquarium.miff
class: PseudoClass
colors: 256
signature: eb5dca81dd93ae7e6ffae99a527eb5dca8...
matte: False
geometry: 640x480
depth: 8
bytes: 308135
format: MIFF
comments:
Imported from MTV raster image: aquarium.mtv
For some formats, additional format-specific information about the file will be
written if the -debug coder or -debug all option is used.
IDENTIFY OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect for the set of images immediately following, until the set is terminated
by the appearance of any option or -noop.
For a more detailed description of each option, see Options, above.
-authenticate <string>
decrypt image with this password
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-format <string>
output formatted image characteristics
-help print usage instructions
-interlace <type>
the type of interlacing scheme
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-ping efficiently determine image characteristics
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-size <width>x<height>{+offset}
width and height of the image
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
For a more detailed description of each option, see Options, above.
GM IMPORT
Import reads an image from any visible window on an X server and outputs it as an image
file. You can capture a single window, the entire screen, or any rectangular portion of
the screen. Use display for redisplay, printing, editing, formatting, archiving, image
processing, etc. of the captured image.
The target window can be specified by id, name, or may be selected by clicking the mouse
in the desired window. If you press a button and then drag, a rectangle will form which
expands and contracts as the mouse moves. To save the portion of the screen defined by the
rectangle, just release the button. The keyboard bell is rung once at the beginning of the
screen capture and twice when it completes.
EXAMPLES
To select an X window or an area of the screen with the mouse and save it in the MIFF
image format to a file entitled window.miff, use:
gm import window.miff
To select an X window or an area of the screen with the mouse and save it in the
Encapsulated PostScript format to include in another document, use:
gm import figure.eps
To capture the entire X server screen in the JPEG image format in a file entitled
root.jpeg, without using the mouse, use:
gm import -window root root.jpeg
To capture the 512x256 area at the upper right corner of the X server screen in the PNG
image format in a well-compressed file entitled corner.png, without using the mouse, use:
gm import -window root -crop 512x256-0+0 -quality 90
corner.png
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect until it is explicitly changed by specifying the option again with a
different effect.
Import options can appear on the command line or in your X resources file. See X(1).
Options on the command line supersede values specified in your X resources file.
For a more detailed description of each option, see Options, above.
-bordercolor <color>
the border color
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-delay <1/100ths of a second>
display the next image after pausing
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-descend
obtain image by descending window hierarchy
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-encoding <type>
specify the text encoding
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-frame include the X window frame in the imported image
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-help print usage instructions
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-monitor
show progress indication
-monochrome
transform the image to black and white
-negate
replace every pixel with its complementary color
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
-pause <seconds>
pause between snapshots [import]
-ping efficiently determine image characteristics
-pointsize <value>
pointsize of the PostScript, X11, or TrueType font
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
-rotate <degrees>{<}{>}
rotate the image
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scene <value>
set scene number
-screen
specify the screen to capture
-set <attribute> <value>
set an image attribute
+set <attribute>
unset an image attribute
-silent
operate silently
-snaps <value>
number of screen snapshots
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
-transparent <color>
make this color transparent within the image
-trim trim an image
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
For a more detailed description of each option, see Options, above.
GM MOGRIFY
Mogrify transforms an image or a sequence of images. These transforms include image
scaling, image rotation, color reduction, and others. Each transmogrified image overwrites
the corresponding original image, unless an option such as -format causes the output
filename to be different from the input filename.
The graphics formats supported by mogrify are listed in GraphicsMagick(1).
EXAMPLES
To convert all the TIFF files in a particular directory to JPEG, use:
gm mogrify -format jpeg *.tiff
To convert a directory full of JPEG images to thumbnails, use:
gm mogrify -size 120x120 *.jpg -resize 120x120 +profile "*"
In this example, '-size 120x120' gives a hint to the JPEG decoder that the images are
going to be downscaled to 120x120, allowing it to run faster by avoiding returning full-
resolution images to GraphicsMagick for the subsequent resizing operation. The ´-resize
120x120' specifies the desired dimensions of the output images. It will be scaled so its
largest dimension is 120 pixels. The ´+profile "*"' removes any ICM, EXIF, IPTC, or other
profiles that might be present in the input and aren't needed in the thumbnails.
To scale an image of a cockatoo to exactly 640 pixels in width and 480 pixels in height,
use:
gm mogrify -resize 640x480! cockatoo.miff
OPTIONS
Options are processed in command line order. Any option you specify on the command line
remains in effect for the set of images that follows, until the set is terminated by the
appearance of any option or -noop.
For a more detailed description of each option, see Options, above.
-affine <matrix>
drawing transform matrix
-antialias
remove pixel aliasing
-asc-cdl <spec>
apply ASC CDL color transform
-authenticate <string>
decrypt image with this password
-auto-orient
orient (rotate) image so it is upright
-background <color>
the background color
-black-threshold red[,green][,blue][,opacity]
pixels below the threshold become black
-blue-primary <x>,<y>
blue chromaticity primary point
-blur <radius>{x<sigma>}
blur the image with a Gaussian operator
-border <width>x<height>
surround the image with a border of color
-bordercolor <color>
the border color
-channel <type>
the type of channel
-charcoal <factor>
simulate a charcoal drawing
-colorize <value>
colorize the image with the pen color
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-compose <operator>
the type of image composition
-compress <type>
the type of image compression
-contrast
enhance or reduce the image contrast
-convolve <kernel>
convolve image with the specified convolution kernel
-create-directories
create output directory if required
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-cycle <amount>
displace image colormap by amount
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-delay <1/100ths of a second>
display the next image after pausing
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-despeckle
reduce the speckles within an image
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-draw <string>
annotate an image with one or more graphic primitives
-edge <radius>
detect edges within an image
-emboss <radius>
emboss an image
-encoding <type>
specify the text encoding
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-enhance
apply a digital filter to enhance a noisy image
-equalize
perform histogram equalization to the image
-extent <width>x<height>{+-}<x>{+-}<y>
composite image on background color canvas image
-fill <color>
color to use when filling a graphic primitive
-filter <type>
use this type of filter when resizing an image
-flip create a "mirror image"
-flop create a "mirror image"
-font <name>
use this font when annotating the image with text
-format <type>
the image format type
-frame <width>x<height>+<outer bevel width>+<inner bevel width>
surround the image with an ornamental border
-fuzz <distance>{%}
colors within this Euclidean distance are considered equal
-gamma <value>
level of gamma correction
-gaussian <radius>{x<sigma>}
blur the image with a Gaussian operator
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-gravity <type>
direction primitive gravitates to when annotating the image.
-green-primary <x>,<y>
green chromaticity primary point
-hald-clut <clut>
apply a Hald CLUT to the image
-help print usage instructions
-implode <factor>
implode image pixels about the center
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-lat <width>x<height>{+-}<offset>{%}
perform local adaptive thresholding
-level <black_point>{,<gamma>}{,<white_point>}{%}
adjust the level of image contrast
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-linewidth
the line width for subsequent draw operations
-list <type>
the type of list
-log <string>
Specify format for debug log
-loop <iterations>
add Netscape loop extension to your GIF animation
-magnify
magnify the image
-map <filename>
choose a particular set of colors from this image
-mask <filename>
Specify a clipping mask
-matte store matte channel if the image has one
-mattecolor <color>
specify the color to be used with the -frame option
-median <radius>
apply a median filter to the image
-minify <factor>
minify the image
-modulate brightness[,saturation[,hue]]
vary the brightness, saturation, and hue of an image
-monitor
show progress indication
-monochrome
transform the image to black and white
-motion-blur <radius>{x<sigma>}{+angle}
Simulate motion blur
-negate
replace every pixel with its complementary color
-noise <radius|type>
add or reduce noise in an image
-noop NOOP (no option)
-normalize
transform image to span the full range of color values
-opaque <color>
change this color to the pen color within the image
-operator channel operator rvalue[%]
apply a mathematical, bitwise, or value operator to an image channel
-ordered-dither <channeltype> <NxN>
ordered dither the image
-output-directory <directory>
output files to directory
-orient <orientation>
Set the image orientation attribute
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
-paint <radius>
simulate an oil painting
-pen <color>
(This option has been replaced by the -fill option)
-pointsize <value>
pointsize of the PostScript, X11, or TrueType font
-profile <filename>
add ICM, IPTC, or generic profile to image
-preserve-timestamp
preserve the original timestamps of the file
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-raise <width>x<height>
lighten or darken image edges
-random-threshold <channeltype> <LOWxHIGH>
random threshold the image
-recolor <matrix>
apply a color translation matrix to image channels
-red-primary <x>,<y>
red chromaticity primary point
-region <width>x<height>{+-}<x>{+-}<y>
apply options to a portion of the image
-render
render vector operations
-repage <width>x<height>+xoff+yoff[!]
Adjust image page offsets
-resample <horizontal>x<vertical>
Resample image to specified horizontal and vertical resolution
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
-roll {+-}<x>{+-}<y>
roll an image vertically or horizontally
-rotate <degrees>{<}{>}
rotate the image
-sample <geometry>
scale image using pixel sampling
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scale <geometry>
scale the image.
-scene <value>
set scene number
-set <attribute> <value>
set an image attribute
+set <attribute>
unset an image attribute
-segment <cluster threshold>x<smoothing threshold>
segment an image
-shade <azimuth>x<elevation>
shade the image using a distant light source
-sharpen <radius>{x<sigma>}
sharpen the image
-shave <width>x<height>{%}
shave pixels from the image edges
-shear <x degrees>x<y degrees>
shear the image along the X or Y axis
-size <width>x<height>{+offset}
width and height of the image
-solarize <factor>
negate all pixels above the threshold level
-spread <amount>
displace image pixels by a random amount
-strip remove all profiles and text attributes from the image
-stroke <color>
color to use when stroking a graphic primitive
-strokewidth <value>
set the stroke width
-swirl <degrees>
swirl image pixels about the center
-texture <filename>
name of texture to tile onto the image background
-threshold <value>{%}
threshold the image
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
-tile <filename>
tile image when filling a graphic primitive
-transform
transform the image
-transparent <color>
make this color transparent within the image
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-units <type>
the units of image resolution
-unsharp <radius>{x<sigma>}{+<amount>}{+<threshold>}
sharpen the image with an unsharp mask operator
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-view <string>
FlashPix viewing parameters
-virtual-pixel <method>
specify contents of "virtual pixels"
-wave <amplitude>x<wavelength>
alter an image along a sine wave
-white-point <x>,<y>
chromaticity white point
-white-threshold red[,green][,blue][,opacity]
pixels above the threshold become white
For a more detailed description of each option, see Options, above.
GM MONTAGE
montage creates a composite image by combining several separate images. The images are
tiled on the composite image with the name of the image optionally appearing just below
the individual tile.
The composite image is constructed in the following manner. First, each image specified on
the command line, except for the last, is scaled to fit the maximum tile size. The maximum
tile size by default is 120x120. It can be modified with the -geometry command line
argument or X resource. See Options for more information on command line arguments. See
X(1) for more information on X resources. Note that the maximum tile size need not be a
square.
Next the composite image is initialized with the color specified by the -background
command line argument or X resource. The width and height of the composite image is
determined by the title specified, the maximum tile size, the number of tiles per row, the
tile border width and height, the image border width, and the label height. The number of
tiles per row specifies how many images are to appear in each row of the composite image.
The default is to have 5 tiles in each row and 4 tiles in each column of the composite. A
specific value is specified with -tile. The tile border width and height, and the image
border width defaults to the value of the X resource -borderwidth. It can be changed with
the -borderwidth or -geometry command line argument or X resource. The label height is
determined by the font you specify with the -font command line argument or X resource. If
you do not specify a font, a font is chosen that allows the name of the image to fit the
maximum width of a tiled area. The label colors is determined by the -background and
-fill command line argument or X resource. Note, that if the background and pen colors are
the same, labels will not appear.
Initially, the composite image title is placed at the top if one is specified (refer to
-fill). Next, each image is set onto the composite image, surrounded by its border color,
with its name centered just below it. The individual images are left-justified within the
width of the tiled area. The order of the images is the same as they appear on the
command line unless the images have a scene keyword. If a scene number is specified in
each image, then the images are tiled onto the composite in the order of their scene
number. Finally, the last argument on the command line is the name assigned to the
composite image. By default, the image is written in the MIFF format and can be viewed or
printed with display(1).
Note, that if the number of tiles exceeds the default number of 20 (5 per row, 4 per
column), more than one composite image is created. To ensure a single image is produced,
use -tile to increase the number of tiles to meet or exceed the number of input images.
Finally, to create one or more empty spaces in the sequence of tiles, use the "NULL:"
image format.
Note, a composite MIFF image displayed to an X server with display behaves differently
than other images. You can think of the composite as a visual image directory. Choose a
particular tile of the composite and press a button to display it. See display(1) and
miff(5)
EXAMPLES
To create a montage of a cockatoo, a parrot, and a hummingbird and write it to a file
called birds, use:
gm montage cockatoo.miff parrot.miff hummingbird.miff
birds.miff
To tile several bird images so that they are at most 256 pixels in width and 192 pixels in
height, surrounded by a red border, and separated by 10 pixels of background color, use:
gm montage -geometry 256x192+10+10 -bordercolor red
birds.* montage.miff
To create an unlabeled parrot image, 640 by 480 pixels, and surrounded by a border of
black, use:
gm montage -geometry 640x480 -bordercolor black
-label "" parrot.miff bird.miff
To create an image of an eagle with a textured background, use:
gm montage -texture bumps.jpg eagle.jpg eagle.png
To join several GIF images together without any extraneous graphics (e.g. no label, no
shadowing, no surrounding tile frame), use:
gm montage +frame +shadow +label -tile 5x1
-geometry 50x50+0+0 *.png joined.png
OPTIONS
Any option you specify on the command line remains in effect for the group of images
following it, until the group is terminated by the appearance of any option or -noop. For
example, to make a montage of three images, the first with 32 colors, the second with an
unlimited number of colors, and the third with only 16 colors, use:
gm montage -colors 32 cockatoo.1 -noop cockatoo.2
-colors 16 cockatoo.3 cockatoos.miff
For a more detailed description of each option, see Options, above.
-adjoin
join images into a single multi-image file
-affine <matrix>
drawing transform matrix
-authenticate <string>
decrypt image with this password
-background <color>
the background color
-blue-primary <x>,<y>
blue chromaticity primary point
-blur <radius>{x<sigma>}
blur the image with a Gaussian operator
-bordercolor <color>
the border color
-borderwidth <geometry>
the border width
-chop <width>x<height>{+-}<x>{+-}<y>{%}
remove pixels from the interior of an image
-colors <value>
preferred number of colors in the image
-colorspace <value>
the type of colorspace
-comment <string>
annotate an image with a comment
-compose <operator>
the type of image composition
-compress <type>
the type of image compression
-crop <width>x<height>{+-}<x>{+-}<y>{%}
preferred size and location of the cropped image
-debug <events>
enable debug printout
-define <key>{=<value>},...
add coder/decoder specific options
-density <width>x<height>
horizontal and vertical resolution in pixels of the image
-depth <value>
depth of the image
-display <host:display[.screen]>
specifies the X server to contact
-dispose <method>
GIF disposal method
-dither
apply Floyd/Steinberg error diffusion to the image
-draw <string>
annotate an image with one or more graphic primitives
-encoding <type>
specify the text encoding
-endian <type>
specify endianness (MSB, LSB, or Native) of image
-fill <color>
color to use when filling a graphic primitive
-filter <type>
use this type of filter when resizing an image
-font <name>
use this font when annotating the image with text
-frame <width>x<height>+<outer bevel width>+<inner bevel width>
surround the image with an ornamental border
-gamma <value>
level of gamma correction
-geometry <width>x<height>{+-}<x>{+-}<y>{%}{@}{!}{^}{<}{>}
Specify dimension, offset, and resize options.
-gravity <type>
direction primitive gravitates to when annotating the image.
-green-primary <x>,<y>
green chromaticity primary point
-help print usage instructions
-interlace <type>
the type of interlacing scheme
-label <name>
assign a label to an image
-limit <type> <value>
Disk, File, Map, Memory, Pixels, Width, Height, Read, Threads, or Write resource
limit
-log <string>
Specify format for debug log
-matte store matte channel if the image has one
-mattecolor <color>
specify the color to be used with the -frame option
-mode <value>
mode of operation
-monitor
show progress indication
-monochrome
transform the image to black and white
-noop NOOP (no option)
-page <width>x<height>{+-}<x>{+-}<y>{%}{!}{<}{>}
size and location of an image canvas
-pen <color>
(This option has been replaced by the -fill option)
-pointsize <value>
pointsize of the PostScript, X11, or TrueType font
-quality <value>
JPEG/MIFF/PNG/TIFF compression level
-red-primary <x>,<y>
red chromaticity primary point
-render
render vector operations
-repage <width>x<height>+xoff+yoff[!]
Adjust image page offsets
-resize <width>x<height>{%}{@}{!}{<}{>}
resize an image
-rotate <degrees>{<}{>}
rotate the image
-sampling-factor <horizontal_factor>x<vertical_factor>
chroma subsampling factors
-scenes <value-value>
range of image scene numbers to read
-shadow <radius>{x<sigma>}
shadow the montage
-sharpen <radius>{x<sigma>}
sharpen the image
-size <width>x<height>{+offset}
width and height of the image
-strip remove all profiles and text attributes from the image
-stroke <color>
color to use when stroking a graphic primitive
-strokewidth <value>
set the stroke width
-texture <filename>
name of texture to tile onto the image background
-thumbnail <width>x<height>{%}{@}{!}{<}{>}
resize an image (quickly)
-tile <geometry>
layout of images [montage]
-title <string>
assign title to displayed image [animate, display, montage]
-transform
transform the image
-transparent <color>
make this color transparent within the image
-treedepth <value>
tree depth for the color reduction algorithm
-trim trim an image
-type <type>
the image type
-verbose
print detailed information about the image
-version
print detailed GraphicsMagick version/build information
-version
print compact GNU-style GraphicsMagick version information
-white-point <x>,<y>
chromaticity white point
For a more detailed description of each option, see Options, above.
X RESOURCES
Montage options can appear on the command line or in your X resource file. Options on the
command line supersede values specified in your X resource file. See X(1) for more
information on X resources.
All montage options have a corresponding X resource. In addition, montage uses the
following X resources:
background (class Background)
background color
Specifies the preferred color to use for the composite image background. The
default is #ccc.
borderColor (class BorderColor)
border color
Specifies the preferred color to use for the composite image border. The default is
#ccc.
borderWidth (class BorderWidth)
border width
Specifies the width in pixels of the composite image border. The default is 2.
font (class Font)
font to use
Specifies the name of the preferred font to use when displaying text within the
composite image. The default is 9x15, fixed, or 5x8 determined by the composite
image size.
matteColor (class MatteColor)
color of the frame
Specify the color of an image frame. A 3D effect is achieved by using highlight and
shadow colors derived from this color. The default value is #697B8F.
pen (class Pen)
text color
Specifies the preferred color to use for text within the composite image. The
default is black.
title (class Title)
composite image title
This resource specifies the title to be placed at the top of the composite image.
The default is not to place a title at the top of the composite image.
GM TIME
DESCRIPTION
time executes an arbitrary gm utility command (e.g. convert) and reports the user and
elapsed time. This provides way to measure command execution times similar to the Unix
´time' command but in a portable and consistent way.
EXAMPLES
To obtain time information for the execution of a command:
% gm time convert input.ppm -gaussian 0x2 output.ppm
convert input.ppm -gaussian 0x2 output.ppm 22.60s user 0.00s system 2354% cpu 0.960 total
Here is the interpretation of the above output:
user - the total user time consumed.
system - the total system time consumed.
total - the total elapsed time consumed.
OPTIONS
The time command reqires no options other than the gm command to execute.
GM VERSION
DESCRIPTION
version displays the software release version, build quantum (pixel sample) depth, web
site URL, copyright notice, enabled features support, configuration parameters, and final
build options used to build the software. The available information depends on how the
software was configured and the host system.
EXAMPLES
To display the version information:
GraphicsMagick 1.3.37 2021-12-12 Q16 http://www.GraphicsMagick.org/
Copyright (C) 2002-2021 GraphicsMagick Group.
Additional copyrights and licenses apply to this software.
See http://www.GraphicsMagick.org/www/Copyright.html for details.
Feature Support:
Native Thread Safe yes
Large Files (> 32 bit) yes
Large Memory (> 32 bit) yes
BZIP yes
FlashPix no
FreeType yes
Ghostscript (Library) no
JBIG yes
JPEG-2000 yes
JPEG yes
Little CMS yes
Loadable Modules no
Solaris mtmalloc no
Google perftools tcmalloc no
OpenMP yes (201511 "4.5")
PNG yes
TIFF yes
TRIO no
Solaris umem no
WebP yes
WMF yes
X11 yes
XML yes
ZLIB yes
Host type: x86_64-unknown-linux-gnu
Configured using the command:
./configure ...
Final Build Parameters:
CC = ...
CFLAGS = ...
CPPFLAGS = ...
CXX = ...
CXXFLAGS = ...
LDFLAGS = ...
LIBS = ...
OPTIONS
The version command does not currently support any options.