Provided by: iraf-dev_2.18.1~rc1-2_amd64 
NAME
mkpkg - make or update an IRAF package or library
SYNOPSIS
mkpkg [options] [ module ... ] [ name=value ... ]
ARGUMENTS
-d[ddd]
Debug mode. Print detailed messages describing what mkpkg is doing. There are four levels of
debug messages, selected by repeating the "d" character in the switch, e.g., "-d" is level one,
"-dd" is level two, and so on. The debug messages get progressively more detailed as the debug
level increases. Debug mode automatically enables the verbose mode messages.
-f file
Set the name of the file to be interpreted (default: "mkpkg"). The special value "stdin" (lower
case) allows commands to be entered interactively from the standard input, e.g., for debugging
mkpkg.
-i Ignore errors. Execution continues even if an error occurs.
-n No execute. Go through the motions, but do not touch any files. No execute mode automatically
enables verbose mode (flag "-v"). This switch should be used to verify new mkpkg files before
execution.
-p pkgname
Load the package environment for the named external package, e.g., "mkpkg -p noao update". If the
same package is always specified the environment variable or logical name PKGENV may be defined at
the host level to accomplish the same thing. The package name must be specified when doing
software development in an external or layered package.
-v Verbose mode. A message is printed whenever a file is touched. Recommended when running large
mkpkg jobs in batch mode.
module The names of the module or modules (named entries in the "mkpkg" file) to be executed. If no
module is named the first module encountered is executed, unless a mkpkg macro preprocessor
directive at the beginning of the file specifies a different default action.
name=value [name=value ...]
Enter the named symbol/value pair into the symbol table of the mkpkg macro preprocessor. The
symbols XFLAGS (for the XC compiler) and LFLAGS (for the linker) are predefined but may be
redefined on the command line. Case is ignored in symbol names for portability reasons.
DESCRIPTION
The mkpkg utility is used to make or update IRAF packages or libraries. mkpkg is used to bootstrap the
IRAF system hence is implemented as a foreign task, callable either from within the IRAF environment or
from the host system. Usage is identical in either case (except that the details of when a particular
argument may need to be quoted will vary depending on the command language used). mkpkg is upwards
compatible with the old mklib utility.
1. Introduction
Mkpkg provides two major facilities: a library update capability and a macro preprocessor. The macro
preprocessor provides symbol definition and replacement, conditional execution, and a number of builtin
commands. The usefulness of these facilities is enhanced by the ability of mkpkg to update entire
directory trees, or to enter the hierarchy of mkpkg descriptors at any level. For example, typing
"mkpkg" in the root directory of IRAF will make or update the entire system, whereas in the "iraf$sys"
directory mkpkg will update only the system libraries, and in the "iraf$sys/fio" directory mkpkg will
update only the FIO portion of the system library "libsys.a".
The mkpkg utility is quite simple to use to maintain small packages or libraries, despite the complexity
of the discussion which follows. The reader is encouraged to study several examples of working mkpkg-
files before reading further; examples will be found throughout the IRAF system. The mkpkg files for
applications packages tend to be very similar to one another, and it is quite possible to successfully
copy and modify the mkpkg-file from another package without studying the reference information given
here.
2. Lexical Conventions
The lexical conventions employed in mkpkg are those used throughout IRAF. Comments may occur anywhere,
begin with the character #, and extend to the end of the current line. Blank lines are ignored virtually
everywhere. Newline may be escaped with backslash to continue on the next line. All filenames are IRAF
virtual filenames with the following extensions.
.a object library
.c C source
.e executable (e.g., "x_package.e")
.f Fortran source
.gc generic C source
.gx generic SPP source
.h C or SPP header file
.inc include file
.l Lex source
.o object file
.r Ratfor source
.s assembler source
.y Yacc source
Since mkpkg is an IRAF utility it recognizes the major IRAF logical directories; these are summarized in
the list below. The IRAF (or UNIX) pathname convention is used to specify pathnames rooted in the
current directory or a logical directory.
bin$ installed executables iraf$bin/
dev$ device tables iraf$dev/
hlib$ machdep header files host$hlib/
host$ host system interface [MACHDEP]
iraf$ the root directory of IRAF [MACHDEP]
lib$ system library iraf$lib/
math$ math sources iraf$math/
pkg$ applications packages iraf$pkg/
sys$ the VOS, system libraries iraf$sys/
tmp$ where temporary files go [MACHDEP]
All other directories should be referenced by giving the path from either the current directory or from
one of the system logical directories shown above. For example, "pkg$system/" is the root directory of
the SYSTEM package, and ".." is the directory one level up from the current directory.
3. Maintaining Libraries with MKPKG
Libraries are described by a member list module in the "mkpkg" file. The syntax of a library member list
module is shown below. Note that the mkpkg module name for a library member list module is the same as
the name of the actual library, hence must end with the extension ".a".
libname.a:
member1 dep1 dep2 ... depN
member2 dep1 dep2 ... depN
...
memberN dep1 dep2 ... depN
;
Here, "libname.a" is the IRAF virtual filename of the library (regardless of what directory it resides
in), "memberN" is the name of a source file which may contain any number of actual library object
modules, and "depN" is the name of a file upon which the named member depends. If any of the named
dependency files is newer than the corresponding member source file, or if the member source file is
newer than the compiled library object module, the source file is recompiled and replaced in the library.
Both source files and dependency files may reside in remote directories. The names of dependency files
in system libraries should be enclosed in <> delimiters, e.g., "<fset.h>". Each member must be described
on a separate line.
If the library being updated does not reside in the current directory (directory from which the "mkpkg"
command was entered) then the library must be "checked out" of the remote directory before it can be
updated, and checked back in when updating is complete. These operations are performed by macro
preprocessor directives, e.g.:
$checkout libsys.a lib$
$update libsys.a
$checkin libsys.a lib$
$exit
libsys.a:
@symtab # update libsys.a in ./symtab
brktime.x <time.h>
environ.x environ.com environ.h <ctype.h>
<fset.h> <knet.h>
main.x <clset.h> <config.h> <ctype.h>
<error.h> <fset.h> <knet.h>
<printf.h> <xwhen.h>
onentry.x <clset.h> <fset.h> <knet.h>
spline.x <math.h> <math/interp.h>
;
Note that the checkout operation is required only in the directory from which the "mkpkg" command was
entered, since the library has already been checked out when the mkpkg-file in a subdirectory is called
to update its portion of the library (as in the "@symtab" in the example above). The checkout commands
should however be included in each mkpkg-file in a hierarchy in such a way that the library will be
automatically checked out and back in if mkpkg is run from that directory. The checkout commands are
ignored if the mkpkg-file is entered when updating the library from a higher level, because in that case
mkpkg will search for the named entry for the library being updated, ignoring the remainder of the mkpkg-
file.
Sometimes it is necessary or desirable to break the library member list up into separate modules within
the same mkpkg-file, e.g., to temporarily change the value of the symbol XFLAGS when compiling certain
modules. To do this use the "@" indirection operator in the primary module list to reference a named
sublist, as in the example below. Normal indirection cannot be used unless the sublist resides in a
subdirectory or in a different file in the current directory, e.g., "@./mki2", since a single mkpkg-file
cannot contain two modules with the same name. The same restrictions apply to the $update operator.
libpkg.a:
@(i2)
alpha.x
beta.x
zeta.f
;
i2:
$set XFLAGS = "-cO -i2"
gamma.f
delta.f
;
In the example above five object modules are to be updated in the library "libpkg.a". The files listed
in module "i2", if out of date, will be compiled with the nonstandard XFLAGS (compiler flags) specified
by the $set statement shown.
4. The MKPKG Macro Preprocessor
The mkpkg macro preprocessor provides a simple recursive symbol definition and replacement facility, an
include file facility, conditional execution facilities, an OS escape facility, and a number of builtin
directives. The names of the preprocessor directives always begin with a dollar sign; whitespace is not
permitted between the dollar sign and the remainder of the name. Several preprocessor directives may be
given on one line if desired. Preprocessor directives are executed as they are encountered, and may
appear anywhere, even in the member list for a library.
4.1. Symbol Replacement
Symbol substitution in the mkpkg macro preprocessor is carried out at the character level rather than at
the token level, allowing macro expansion within tokens, quoted strings, or OS escape commands. Macros
are recursively expanded but may not have arguments.
Macros may be defined on the mkpkg command line, in the argument list to a $call or $update directive
(see below), in an include file referenced with the $include directive, or in a $set directive. All
symbols are global and hence available to all lower level modules, but symbols are automatically
discarded whenever a module exits, hence cannot affect higher level modules. A local symbol may redefine
a previously defined symbol. The IRAF and host system environment is treated as an extension of the
mkpkg symbol table, i.e., a logical directory such as "iraf" may be referenced like a locally defined
symbol.
Macro replacement occurs only when explicitly indicated in the input text, as in the following example,
which prints the pathname of the dev$graphcap file on the mkpkg standard output. The sequence "$("
triggers macro substitution. The value of a symbol may be obtained interactively from the standard input
by adding a question mark after the left parenthesis, i.e., "$(?terminal)" (this does not work with the
-f stdin flag). The contents of a file may be included using the notation "$(@file)". Note that case
is ignored in macro names; by convention, logical directories are normally given in lower case, and
locally defined symbols in upper case.
$echo $(dev)graphcap
!xc $(XFLAGS) filea.x fileb.x
Symbols are most commonly defined locally with the $set directive. The $include directive is useful for
sharing symbols amongst different modules, or for isolating any machine dependent definitions in a
separate file. The IRAF mkpkg system include file hlib$mkpkg.inc is automatically included whenever
mkpkg is run.
$set symbol = value
Enter the named symbol into the symbol table with the given string value. Any existing symbol
will be silently redefined. Symbols defined within a module are discarded when the module exits.
$include filename
Read commands (e.g., $set directives) from the named include file. The include filename may be
any legal virtual filename, but only the major logical directories are recognized, e.g., "iraf$",
"host$", "hlib$", "lib$", "pkg$", and so on.
The use of the $set directive is illustrated in the example below. Note the doubling of the
preprocessor metacharacter to avoid macro expansion when entering the value of the GEN macro into
the symbol table. The sequence "$$" is replaced by a single "$" whenever it is encountered in the
input stream.
$set GFLAGS = "-k -t silrdx -p ak/"
$set GEN = "$generic $$(GFLAGS)"
ifolder (amulr.x, amul.x) $(GEN) amul.x $endif
4.2 Conditional Execution
Conditional control flow is implemented by the $if directives introduced in the last example and
described below. The character "n" may be inserted after the "$if" prefix of any directive to negate the
sense of the test, e.g., "$ifndef" tests whether the named symbol does not exist. Nesting is permitted.
$ifdef (symbol [, symbol, ...])
Test for the existence of one of the named symbols.
$ifeq (symbol, value [, value, ...])
Test if the value of the named symbol matches one of the listed value strings.
$iferr
Test for an error return from the last directive executed which touched a file. This has only
effect if mkpkg is invoked with the -i option so that it doesn't exit on the first error.
$iffile (file [, file, ...])
Test for the existence of any of the named files.
$ifnewer (file, filea)
$ifnewer (file: filea [, fileb, ...])
Test if the named file is newer (has been modified more recently) than any of the named files to
the right. The colon syntax may be used for clarity when comparing one file to many, but a comma
will do.
$ifolder (file, filea)
$ifolder (file: filea [, fileb, ...])
Test if the named file is older than any of the named files.
$else
Marks the else clause of an if statement. The else-if construct is implemented as "$else $if",
i.e., as a combination of the two more primitive constructs.
$endif
Terminates a $if or $if-$else statement.
$end
Terminates an arbitrary number of $if or $if-$else statements. This is most useful for
terminating a long list of $if-$else clauses, where the alternative would be a long string of
$endif directives.
$exit Terminate the current program; equivalent to a semicolon, but the latter is normally used only at
the end of the program to match the colon at the beginning, whereas $exit is used in conditionals.
4.3 Calling Modules
The following preprocessor directives are available for calling mkpkg modules or altering the normal flow
of control.
$call module[@subdir[/file]] [name=value ...]
Call the named mkpkg-file module as a subroutine. In most cases the called module will be in the
current mkpkg-file, but the full module name syntax permits the module to be in any file of any
subdirectory ("./file" references a different file in the current directory). Arguments may be
passed to the called module using the symbol definition facility; any symbols defined in this
fashion are available to any modules called in turn by the called module, but the symbols are
discarded when the called module returns.
$update module[@subdir[/file]] [name=value ...]
Identical to $call except that the named module is understood to be a library member list. The
current value of the symbol XFLAGS is used if XC is called to compile any files. If the named
library does not exist one will be created (a warning message is issued).
$goto
Causes execution to resume at the line following the indicated label. The syntax of a goto label
is identical to that of a mkpkg-file module name, i.e., a line starting with the given name
followed by a colon. The $goto statement automatically cancels any $if nesting.
4.4 Preprocessor Directives
The remaining preprocessor directives are described below in alphabetical order. Additional capability
is available via OS escapes, provided the resultant machine dependence is acceptable.
$echo message
Print the given message string on the standard output. The string must be quoted if it contains
any spaces.
$checkout file directory
Check the named file out of the indicated directory. The checkout operation makes the file
accessible as if it were in the current directory; checkout is implemented either as a symbolic
link or as a physical file copy depending upon the host system. The referenced directory may be a
logical directory, e.g., "lib$", or a path, e.g, "pkg$images/". Checkout is not disabled by the
"-n" flag.
$checkin file directory
Check the named file back into the indicated directory. The checkin operation is implemented
either as a remove link or copy and delete depending upon the host system. Checkin is not
disabled by the "-n" flag.
$copy filea fileb
Make a copy fileb of the existing file filea. On a UNIX host the copy operation will preserve the
file modify date if the file is a library (to avoid the "symbol table out of date" syndrome).
$delete file [file ...]
Delete the named file or files.
$generic [-k] [-p prefix] [-t types] [-o root] files
Run the generic preprocessor on the named files. The generic preprocessor is an IRAF bootstrap
utility.
$xyacc [options] file
Run the xyacc parser generator on the named files. The yacc parser generator is an IRAF bootstrap
utility.
$link [switches] file1 file2 ... fileN [-o file.e]
Call XC with the given argument list to link the indicated files and libraries. The value of the
symbol LFLAGS (default value the null string) is automatically inserted at the beginning of the
command line. This is equivalent to "!xc $(LFLAGS) ...".
$move file destination
Move the named file to the indicated directory, or rename the file in the current directory.
$omake file [dep1] [dep2 ...]
Compile the named source file if it does not have a corresponding object file in the current
directory, if the object file is older, or if any of the listed dependency files are newer (or not
found). The current value of the symbol XFLAGS is used if XC is called to compile the file.
$purge directory
Delete all old versions of all files in the named directory. Nothing is done if the system does
not support multiple file versions.
$special directory : filelist ;
Add one or more files to the special file list for the host system. This is a system facility,
not intended for use in applications mkpkg files. The special file list is a list of all source
files needing special processing for the local host system. Examples of special files are files
which are optimized in assembler (or some other nonstandard language), or files which must be
compiled in a special way to get around bugs in a host compiler. The special file list makes it
possible to flag arbitrary files for special processing, without having to modify the standard
software distribution. In the IRAF system, the special file list is defined in the file
"hlib$mkpkg.sf" which is included automatically by "hlib$mkpkg.inc" whenever mkpkg is run.
The syntax of a filelist entry is as follows:
modname source_file mkobj_command
where modname is the filename of a library module as it appears in a library module list for the
named directory, source_file is the virtual pathname of the source file to be used in lieu of the
standard portable source file modname, and mkobj_command is the mkpkg command (e.g., $xc or an OS
escape) to be executed to compile the named module. The character "&" appearing in either the
source file name or mkobj command is replaced by modname. If the mkobj_command is omitted the
specified source file will be compiled with $XC using the current value of XFLAGS.
$xc [switches] file1 file2 ... fileN
Call the XC compiler to compile the named files. Note that the value of the symbol XFLAGS is not
used when XC is explicitly called in this fashion (XFLAGS is used by $update and $omake).
$debug [on|off]
Turn debug mode on or off. If no argument is supplied debug mode is turned on. Turning on debug
mode automatically enables verbose mode.
$verbose [on|off]
Turn verbose mode on or off. If no argument is supplied verbose mode is turned on.
5. Error Recovery
mkpkg is implemented in such a way that it is restartable. If a mkpkg operation terminates prematurely
for some reason, e.g., because of a compile error, execution error (such as cannot find the mkpkgfile in
a subdirectory), interrupt, etc., then the mkpkg command can be repeated after correcting the error,
without repeating the operations already completed. If mkpkg is interrupted it may leave checked out
files, objects compiled but not yet updated in a library, etc. lying about, but this is harmless and the
intermediate files will be cleaned up when the errors have been corrected and the run successfully
completes.
EXAMPLES
Update the current package.
cl> mkpkg
Update the package library but do not relink.
cl> mkpkg libpkg.a
Make a listing of the package.
cl> mkpkg listing
Sample mkpkg-file for the above commands:
# Make my package.
$call relink
$exit
relink:
$update libpkg.a
$omake x_mypkg.x
$link x_mypkg.o -lxtools
;
libpkg.a:
task1.x pkg.h
task2.x
filea.x pkg.com pkg.h <fset.h>
fileb.x pkg.com
;
listing:
!pr task1.x task2.x file[ab].x | vpr -Pvup
;
SEE ALSO
generic(1), xc(1). There is also information in the README.softools in the IRAF documentation directory.
AUTHOR
This manual page was taken from the IRAF mkpkg.hlp help file.