Provided by: msktutil_1.2.1-2_amd64 
NAME
msktutil - fetches and manages kerberos keytabs in an Active Directory environment
SYNOPSIS
msktutil [mode] [parameter 1] [parameter 2] ...
DESCRIPTION
msktutil is a Unix/Linux keytab utility for Microsoft Active Directory environments. This
program is capable of creating accounts in Active Directory, adding service principals to
those accounts, and creating local keytab files so that kerberizied services can utilize
Active Directory as a Kerberos infrastructure. msktutil will create and manage machine
accounts by default. The --use-service-account option lets msktutil operate on service
accounts. msktutil requires that the Kerberos client libraries are properly installed and
configured to use Active Directory as a realm.
Whenever a principal is added or a keytab is updated, the secret password for the
corresponding account is changed. By default, the password is not stored, so it needs to
be reset each time msktutil is executed. All entries in the keytab will be automatically
updated whenever the password is reset. The previous entries will be left in the keytab,
so sessions using the older key versions will not break. This behavior is similar to the
way Windows hosts handle machine password changes.
CREDENTIALS
There are two common methods of using this program. The first is to "kinit" with
Administrator-like credentials which have permission to create computer objects in your
Active Directory server. If you invoke the program with such credentials, you can create
a new computer account or service account from scratch.
The second is to pre-create the accounts with such credentials, and then invoke msktutil
on a machine without any special permissions. When the computer account or service
account exists already, msktutil will attempt to authenticate as that account using either
the existing keytab, or if that fails, a default password. When that default password is
not specified with the option --old-account-password, msktutil will use the default
machine password. It will then change the password and update the keytab appropriately.
This is usually the more convenient option when joining many computers to the domain.
To pre-create a computer account, you may use the Active Directory Users and Computers
GUI, select "new computer" from the right click menu, and type the short DNS name, then
right click on the newly created object and select "Reset account" to set the password to
the default value. Another alternative is to run msktutil in the pre-create mode. Both
methods accomplish the same thing.
To pre-create a service account, you may use the Active Directory Users and Computers GUI,
select "new user" from the right click menu, fill in all required data, set the password
to a specific value and use setspn.exe to set the desired servicePrincipalName(s). You
may also select "must change password at next logon".
MODES
create Creates a keytab for the current host or a given service account. Equivalent to
update --service host.
update Forces a password change and updates all related service principal entries from the
servicePrincipalName and userPrincipalName attributes. Updates dNSHostName for
machine accounts and always updates msDS-supportedEncryptionTypes attributes with
current values, and applies other changes as specified.
auto-update
Checks if the password is at least 30 days old (from pwdLastSet attribute), and
that the account does not have password expiry disabled. If those conditions are
met, acts just like msktutil update. Will also update if the keytab failed to
authenticate but the default password did work (e.g. after resetting the account
in AD). Otherwise, exits without doing anything (even if attribute modifying
options are given). This option is intended for use from a daily crontab to ensure
that the password is rotated regularly.
pre-create
Pre-create (or update) an account for the given host with default password. Does
not use or update local keytab. Requires -h or --computer-name argument. Implies
--user-creds-only. Generally requires administrator credentials.
flush Flushes out principals for the current accountname from the keytab, and makes
corresponding changes to the machine or service account.
cleanup
Deletes entries from the keytab that are no longer needed. delete Deletes the host
or service account from Active Directory.
OPTIONS
COMMON OPTIONS
-v, --version
Displays version information
--help Displays a help message
--verbose
Enables verbose status messages. May be specified more then once to get LDAP
debugging.
CONNECTION/SETUP OPTIONS
-b, --base <base ou>
Specifies an LDAP base OU when creating a new account. Unless the given string
ends with the domain's base DN, it is assume to be a relative path: For example,
specifying '-b OU=Unix' for a computer named SERVER in an Active Directory domain
example.com would create a computer account in the LDAP path:
CN=SERVER,OU=Unix,DC=EXAMPLE,DC=COM. This option can also be specified by setting
the MSKTUTIL_LDAP_BASE environment variable to the desired value.
If not specified, the default value is read from AD (and the default there, unless
modified by an admin, is CN=Computers for machine accounts and CN=Users for service
accounts).
--computer-name <name>
Specifies that the new account should use <name> for the computer account name and
the SAM Account Name. Note that a '$' will be automatically appended to the SAM
Account Name. Defaults to the machine's hostname, excluding the realm, with dots
replaced with dashes.
That is: if the realm is EXAMPLE.COM, and the hostname is FOO.EXAMPLE.COM, the
default computer name is FOO. If the hostname is FOO.BAR.EXAMPLE.COM, the default
computer name is FOO-BAR.
--account-name <name>
An alias for --computer-name that can be used when operating on service accounts.
Note that a '$' will not be automatically appended to the SAM Account Name when
using service accounts.
--old-account-password <password>
Use supplied account password for authentication. This is useful if the keytab
does not yet exist but the password of the computer account is known. This
password will be changed by msktutil in order to create or update the keytab
--password <new_password>
Specify the new account password instead of generating a random one. Consider the
password policy settings when defining the string.
--dont-change-password
Do not create a new password. Try to use existing keys when performing keytab
updates or the old password when creating a new keytab. This is useful for adding
new SPNs to a machine or service account. This option is only available in update
or create mode. In create mode the old password needs to be specified with --old-
account-password
-h, --hostname <name>
Overrides the current hostname to be used to be <name>. If this is not specified,
the local host name will be used. Note that the local name lookup service will be
to qualify and resolve names into fully-qualified names, including a domain
extension. This affects the default hostname for other arguments, and the default
computer-name. The hostname is also used to set the dNSHostName attribute.
-k, --keytab <file>
Specifies to use <file> for the keytab. This option can also be specified by
setting the MSKTUTIL_KEYTAB environment variable to the name of the desired keytab
file. This keytab is both read from, in order to authenticate as the given
account, and written to, after updating the account password. Default:
/etc/krb5.keytab
--keytab-auth-as <name>
Specifies which principal name we should try to use, when we authenticate from a
keytab. Normally, msktutil will try to use the account name or the host principal
for the current host. If this option is specified, instead msktutil will try to use
the given principal name first, and only fall back to the default behavior if we
fail to authenticate with the given name. This option can be useful if you do not
know the current password for the relevant account, do not have a keytab with the
account principal, but you do have a keytab with a service principal associated
with that account.
--server <server>
Specifies to use <server> as the domain controller. This affects both kerberos and
ldap operations. The server can also be specified by setting the MSKTUTIL_SERVER
environment variable. Default: looked up in DNS from the realm name.
--server-behind-nat
When the server is behind a firewall that performs Network Address Translation,
KRB-PRIV messages fail validation. This is because the IP address in the encrypted
part of the message cannot be rewritten in the NAT process. This option ignores
the resulting error for the password change process, allowing systems outside the
NAT firewall to join the domain managed by servers inside the NAT firewall.
--realm <realm>
Specifies to use <realm> as kerberos realm. Default: use the default_realm from
[libdefaults] section of krb5.conf.
--site <site>
Find and use domain controller in specific AD site. This option is ignored if
option --server is used.
-N, --no-reverse-lookups
Do not attempt to canonicalize the name of the domain controller via DNS reverse
lookups. You may need to do this if your client cannot resolve the PTR records for
a domain controller or your DNS servers store incorrect PTR records. Default: Use
DNS reverse lookups to canonicalize DC names.
-n, --no-canonical-name
Do not attempt to canonicalize the hostname while creating names of kerberos
principals. Instead use supplied hostname. This may be needed for systems where
forward and reverse DNS lookups do not return the same (an dynamic dns system for
example where lookup for myhost.mydomain returns IP X.Y.Z.W , but lookup for IP
X.Y.Z.W returns a name different than myhost.mydomain).
--user-creds-only
Don't attempt to authenticate with a keytab: only use user's credentials (from e.g.
kinit). You may need to do this to modify certain attributes that require
Administrator credentials (description, userAccountControl, userPrincipalName, in a
default AD setup).
--auto-update-interval <days>
Number of <days> when msktutil auto-update will change the account password.
Defaults to 30 days.
-m, --sasl-mechanisms <mechanisms list>
A space-separated list of candidate SASL mechanisms to use when performing the LDAP
bind. The first mechanism in the list that is supported by both the client (the
host running msktutil) and the server (Active Directory) will be used. If providing
more than one candidate mechanism, make sure to quote the list to protect the
whitespace from the shell. Default: "GSS-SPNEGO GSSAPI".
OBJECT TYPE/ATTRIBUTE-SETTING OPTIONS
--use-service-account
Create and maintain service accounts instead of machine accounts.
--delegation
Enables the account to be trusted for delegation. This option can also be enabled
by setting the MSKTUTIL_DELEGATION environment variable. This modifies the
userAccountControl attribute. Generally requires administrator credentials.
--description <text>
Sets the account's description attribute to the given text (or removes if text is
''). Generally requires administrator credentials.
--disable-delegation
Disables the account from being trusted for delegation. This modifies the
userAccountControl attribute. Generally requires administrator credentials.
--disable-no-pac
Unsets the flag that disables the KDC's including of a PAC in the machine's service
tickets. This modifies the userAccountControl attribute. Generally requires
administrator credentials.
--dont-expire-password
Sets the DONT_EXPIRE_PASSSWORD bit in the userAccountControl attribute, which
disables password expiry for this account. If you don't run a cron job to
periodically rotate the keytab, you will want to set this flag. Generally requires
administrator credentials.
--do-expire-password
Unsets the DONT_EXPIRE_PASSWORD flag in the userAccountControl attribute.
Generally requires administrator credentials.
--dont-update-dnshostname
Do not update dnsHostName attribute. In some AD installations modification of this
attribute is not allowed (unless using administrator credentials), using this
option will avoid constraint violation warning.
--enable
Unsets the UF_ACCOUNT_DISABLE flag in the userAccountControl attribute. When a
computer leaves the domain this flag is normally set. Generally requires
administrator credentials.
--enctypes <integer>
Sets the supported encryption types in the msDs-supportedEncryptionTypes field.
You may OR together the following values:
0x1=des-cbc-crc
0x2=des-cbc-md5
0x4=rc4-hmac-md5
0x8=aes128-cts-hmac-sha1
0x10=aes256-cts-hmac-sha1
This value is used to determine which encryption types AD will offer to use, and
which encryption types to put in the keytab.
If the value is set to 0x3 (that is: only the two DES types), it also attempts to
set the DES-only flag in userAccountControl.
Note: Windows 2008R2 refuses to use DES by default; you thus cannot use DES-only
keys unless you have enabled DES encryption for your domain first. Recent versions
of MIT kerberos clients similarly refuse to use DES by default.
Default: sets the value to 0x1C: that is, use anything but DES.
--allow-weak-crypto
Enables the usage of DES keys for authentication. This is equivalent to MIT's
krb5.conf parameter allow_weak_crypto.
--no-pac
Specifies that service tickets for this account should not contain a PAC. This
modifies the userAccountControl attribute. See Microsoft Knowledge Base article
#832575 for details. This option can also be specified by setting the
MSKTUTIL_NO_PAC environment variable. Generally requires administrator
credentials.
-s, --service <principal>
Specifies a service principal to add to the account (and thus keytab, if
appropriate). The service is of the form <service>/<hostname>. If the hostname is
omitted, assumes current hostname. May be specified multiple times. When creating
machine accounts, entries for the host service are created by default, unless
--service is given. Unqualified service names (without a '/' component) are
qualified with the full and the short hostnames, eg. host/hostname.example.com and
host/hostname.
--remove-service <principal>
Specifies a service principal to remove from the account (and keytab if
appropriate).
--upn <principal>
Sets the userPrincipalName attribute of the computer account or service account to
be <principal>.
The userPrincipalName can be used in addition to the sAMAccountName (e.g.
computername$ for computer accounts) for kinit.
<principal> can be provided in short form (e.g. host/hostname.example.com) or in
long form (e.g. host/hostname.example.com@EXAMPLE.COM). In short form the default
realm will automatically be appended.
This operation requires administrator privileges.
--set-samba-secret
Use Samba's net changesecretpw command to locally set the machine account password
in Samba's secrets.tdb. $PATH need to include Samba's net command. Samba needs to
be configured appropriately.
--use-samba-cmd <command>
Use supplied command instead of Samba's net changesecretpw command. command will be
supplied machine account password on standard input and shall return 0 exit code on
success.
--check-replication
Wait until the password change is reflected in LDAP. By default, msktutil exits
once a password update is successful and the new keytab is written. However, due
to replication delays, LDAP queries might still return an older key version number.
If --check-replication is given, msktutil waits until the key version number is
updated on the queried LDAP server as well. Note that this is just a sanity check:
The new password is supposed to be accepted on all domain controllers once the
update succeeds, even if LDAP is not yet in sync. Turning on this option might
substantially increase the runtime of msktutil in some environments due to
replication delays (eg. 15 to 30 minutes for common AD configurations). The
default is not to check LDAP replication.
CLEANUP OPTIONS
--remove-old <number>
Removes entries from the keytab that are older than <number> days. The newest
keytab entries will be kept to prevent a total cleanup. I.e. it is not possible to
produce an empty keytab with the --remove-old option.
--remove-enctype <enctype>
Removes entries from the keytab with given encryption type. Warning: it is
possible to produce empty keytabs with the --remove-empty option by successively
removing all encryption types. Supported enctype strings are: des-cbc-crc,des-cbc-
md5, arcfour, aes128 and aes256.
NOTES
PASSWORD EXPIRY
Be aware that Windows machines will, by default, automatically change their account
password every 30 days, and thus many domains have a 90-day password expiry window, after
which your keytab will stop working. There are two ways to deal with this:
a) (Preferred): Make sure you're running a daily cron job to run msktutil auto-update,
which will change the password automatically 30 days after it was last changed and update
the keytab.
b) (Not preferred): disable password expiry for the account via the --dont-expire-password
option (or otherwise setting DONT_EXPIRE_PASSWORD flag in userAccountControl in AD).
PASSWORD POLICY ISSUES
This section only applies to msktutil --use-service-account.
While machine account passwords may be changed at any time, service accounts are user
accounts and your Active Directory domain may have special password policies for those
user accounts. E.g., "minimum password age" is typically set to 1 day, which means that
you will have to wait for that time to pass until you may invoke msktutil update --use-
service-account.
OTHER NOTES
Unlike other kerberos implementations, Active Directory has only a single key for all of
the principals associated with an account. So, if you create a HTTP/hostname service
principal, it will share the same key as the host/hostname principal. If you want to
isolate (security-wise) different service principals, you may want to create a dedicated
service account for them (with --use-service-account) and a separate keytab file (with
--keytab).
Also note: kinit -k 'host/computername' *will not work*, by default, even when that is a
valid service principal existing in your keytab. Active Directory does not allow you to
authenticate as a service principal, so do not use that as a test of whether the service
principal is working. If you actually want to authenticate as the computer account user,
kinit -k 'computername$' instead.
If you really need to be able to authenticate as 'host/computername', you can also use the
--upn argument to set the userPrincipalName attribute (generally requires administrator
credentials, not computer account credentials). Both 'computername$' and the value of
userPrincipalName are treated as valid account names to kinit as.
msktutil will use kerberized LDAP operations to talk to domain controllers. To obtain a
LDAP service ticket, the DNS service will be used to construct the domain controllers LDAP
principal name. If DNS is misconfigured, this construction may fail. To work around this
issue, you may specify the fully qualified DNS name of your domain controller with the
--server option and additionally use the --no-reverse-lookups option.
Samba (www.samba.org) provides the net command that can be used to manage kerberos keytabs
as well. Using msktutil and commands like "net ads join" or "net ads keytab" together can
lead to trouble. With the --set-samba-secret option, msktutil can be used as a
replacement for net.
Active Directory includes authorization data (e.g. information about group memberships) in
Kerberos tickets. This information is called PAC and may lead to very large ticket sizes.
Especially HTTP services are known to produce failures if that size exceeds the HTTP
header size. If your service does not make use of that PAC information (which is true for
most Unix/Linux-services) you may just disable it with the --no-pac option.
EXAMPLES
For unprivileged users the most common invocations are:
msktutil create
This will create a computer account in Active Directory with a new password and write out
a new keytab.
msktutil update --service host --service HTTP
This will update a computer account in Active Directory with a new password, write out a
new keytab, and ensure that it has both "host" and "HTTP" service principals are on it for
the hostname.
msktutil update --dont-change-password --service host --service HTTP
This will do the same as the last example but without changing the password.
msktutil auto-update
This is useful in a daily cron job to check and rotate the password automatically when
it's 30 days old.
For users with admin privileges in AD, some common uses:
msktutil create --service host --service HTTP
This will create a computer account in Active Directory with a new password, write out a
new keytab, and ensure that it has both "host" and "HTTP" service principals are on it for
the hostname.
msktutil pre-create --host computer1.example.com
This will pre-create an account for computer1 with the default password using your
credentials. This can be done on a central host, e.g. to script the addition of many
hosts. You can then use msktutil create on the hosts themselves (without special
credentials) to join them to the domain.
msktutil create --host afs --service afs --enctypes 0x03
This will create an afs/cell.name@REALM principal, and associate that principal with a
computer account called 'afs'. The principal will be marked as DES-only, which is
required for AFS.
msktutil create --use-service-account --service HTTP/hostname.example.com --keytab /etc/apache/krb5.keytab --account-name srv-http --no-pac
This will create an HTTP/hostname.example.com@REALM principal, and associate that
principal with a service account called 'srv-http'. Corresponding Kerberos keys will be
written to the keytab file /etc/apache/krb5.keytab. The size of Kerberos tickets for that
service will stay small because no PAC information will be included.
msktutil create --keytab /etc/krb5/user/10123/client.keytab --use-service-account --account-name johndoe --dont-change-password --old-account-password <John Doe's Password>
This will create a keytab for johndoe without changing John Doe's password
msktutil create --service host/hostname --service host/hostname.example.com --set-samba-secret --enctypes 0x4
This will create a computer account in Active Directory that is compatible with Samba.
The command creates a new password, write out a new keytab, and ensure that it includes
both "host/hostname" and "host/hostname.example.com" as service principals (which is
equivalent to what setspn.exe -R would do on windows). The new computer password will be
stored in Samba's secrets.tdb database to provide interoperability with Samba. As Samba
(version 3) only supports arcfour encrypted Kerberos tickets the --enctypes option must be
used to select only that encryption type.
msktutil cleanup --remove-old 10
Deletes all entries older than 10 days, keeping at least the last entry.
ENVIRONMENT
MSKTUTIL_LDAP_BASE
Specifies a relative LDAP base when creating a new account (see --base),
MSKTUTIL_KEYTAB
Specifies the keytab. Default: /etc/krb5.keytab (see --keytab),
MSKTUTIL_SERVER
Specifies the domain controller (see --server).
MSKTUTIL_DELEGATION
Enables the account to be trusted for delegation (see --delegation).
MSKTUTIL_NO_PAC
Specifies that service tickets for this account should not contain a PAC (see --no-
pac).
MSKTUTIL_SAMBA_CMD
Specifies the command to be used to locally set the machine account password in
Samba's secrets.tdb.
AUTHORS
(C) 2004-2006 Dan Perry <dperry at pppl.gov>
(C) 2006 Brian Elliott Finley (finley at anl.gov)
(C) 2009-2010 Doug Engert (deengert at anl.gov)
(C) 2010 James Knight <foom at fuhm.net>
(C) 2010-2013 Ken Dreyer <ktdreyer at ktdreyer.com>
(C) 2012-2021 Olaf Flebbe <of at oflebbe.de>
(C) 2012-2022 Mark Proehl <mark at mproehl.net>
(C) 2013-2017 Daniel Kobras <d.kobras at science-computing.de>
(C) 2017-2022 Michael Osipov <michael.osipov at siemens.com>
(C) 2018-2022 Daniel Kobras <kobras at puzzle-itc.de>
1.2.1 msktutil(1)