Provided by: ipv6toolkit_2.0+ds.1-2build2_amd64 
NAME
script6 - A tool to make complex IPv6 tasks easy script6 SCRIPT [PARAMETERS]
DESCRIPTION
script6 is a set up scripts that make frequent and/or rather complex IPv6-related tasks
easy.
SCRIPTS
get-aaaa
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (one per line),
and obtains the AAAA records for the corresponding domain. If the
domain name does not contain AAAA records, the tool will add
the suffix "www.", in the hopes that the resulting domain name
might contain some.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
IPV6_ADDRESS_1
IPV6_ADDRESS_2
get-alexa-domains
This script takes no further arguments, and operates as follows:
+ It reads from standard input lines with the same format as those
of Alexa's Top 1M web sites. That is, lines with the folowing syntax:
RANKING,DOMAIN_NAME
+ It extracts the domainname from each line, and prints the corresponding
domain name to standard output.
This script is typically useful for extracting domain names from Alexa's Top 1M web sites
file, such that they can be processed by other tools (e.g. the get-aaaa command of
script6).
get-ns
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the NS records for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
get-mx
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the MX for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
get-ns
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the NS records for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
get-trace-stats
This command causes the script6 tool to read from standard input the results of a "script6
trace" command (typically piped from a file), and produce statistics based on such
results.
Among the statistics produced by this command are:
* Packet drop rate: That is, the percentage of destination IPv6
addresses that result unreachable if IPv6 extension headers are
employed.
* Packet drop rate by different AS: That is, the percentage of packet
drops that occur at an Autonomous System (AS) other than the AS
corresponding to the destination IPv6 address.
* Packet drop rate by same AS: That is, the percentage of packet
drops that occur at the same Autonomous System (AS) as that
corresponding to the destination IPv6 address.
* Delta-Hops statistics: Statistics regarding the Delta-Hops at which
the packet drops occur, with "delta-hops" defined as "the number of
hops from the intended destination".
The get-trace-stats performs a number of sanity checks on the input data (i.e., the output
from "script6 trace"). For example, if a line of input indicates that the last responding
node for the non-EH-enabled path6 command is not the intended destination, this means that
the destination is unreachable even when no IPv6 extension headers are employed, and hence
the corresponding line will be discarded.
trace DESTINATION [EHTYPE[EHSIZE]] [PROTOCOL [DESTPORT]]]
The trace command causes the script6 to read IPv6 addresses from standard input (typically
piped from a file). For each IPv6 address, the script6 will try to isolate IPv6 blackholes
resulting from employing IPv6 extension headers. By default, the probe packets (containing
IPv6 Extension Headers) are IPv6 packets with a Destination Options Header of 8 bytes,
encapsulating an ICMPv6 Echo Request message. However, this can be overridden by
specifying the EHTYPE {DO,HBH,FH}, EHSIZE (an integer), PROTOCOL {tcp,udp,icmpv6}, and
DESTPORT (a short integer) parameters.
The "trace" command of the script6 tool internally employs the path6 tool of the toolkit
as follows. Let us assume that we want to isolate an IPv6 blackhole on the path towards
the destination system 2001:db8:d::1. Firstly, script6 will obtain the output of path6
towards such destination:
1. 2001:db8:1:1000::1
2. 2001:db8:2:2000::4
3. 2001:db8:2:4000::1
4. 2001:db8:3:4000::1
5. 2001:db8:3:1000::1
6. 2001:db8:4:4000::1
7. 2001:db8:4:1000::1
8. 2001:db8:5:5000::1
9. 2001:db8:5:6000::1
10. 2001:db8:d::1
Subsequently, script6 will obtain the output of EH-enabled path6 to the same destination:
1. 2001:db8:1:1000::1
2. 2001:db8:2:2000::4
3. 2001:db8:2:4000::1
4. 2001:db8:3:4000::1
5. 2001:db8:3:1000::1
6. 2001:db8:4:4000::1
For the sake of brevity, let us refer to the last-responding node in the EH-enabled path6
("2001:db8:4:4000::1" in this case) as "M". Assuming both packets in both path6 commands
employ the same path, we will refer to "the node following the last responding node in the
EH-enabled path6" ("2001:db8:4:1000::1" in our case), as "M+1", etc.
Based on traceroute information above, which node is the one actually dropping the EH-
enabled packets will depend on whether the dropping node filters packets on ingress or the
egress. If the former, the dropping node will be M+1. If the latter, the dropping node
will be "M".
path6 assumes that nodes perform ingress-filtering. Thus, in our example above the last
responding node to the EH-enabled traceroute ("M") is "2001:db8:4:4000::1", and therefore
we assume the "node" dropping node to be "2001:db8:4:1000::1" ("M+1").
The resulting output will have the following syntax:
DEST#LAST_NOEH#HOPS_NOEH#LAST_EH$HOPS_EH#DROPN#DROPN2
where:
* DEST: Destination IPv6 address (as read from standard input).
In our example above, this would be 2001:db8:d::1.
* LAST_NOEH: Last responding IPv6 address for the path6 command
with no IPv6 extension headers (this will be the same as DEST
if there is a working path to the destination). In our example
above, this would be 2001:db8:d::1.
* HOPS_NOEH: Number of hops to LAST_NOEH. In our example above,
this would be "10".
* LAST_EH: Last responding IPv6 address in the EH-enabled path6
command. In our example above, this would be 2001:db8:4:4000::1.
* HOPS_EH: Number of hops to LAST_EH. In our example above, this
would be "6".
* DROPN: Dropping node (M+1 in our explanation above). In our
example above, this would be 2001:db8:4:1000::1.
* DROPN: Node after the dropping node (M+2). In our example,
this would be 2001:db8:5:5000::1.
The output of the "trace" command is meant to be processed by the get-trace-stats command
of the script6 tool. Please check the blackhole6(1) tool for a more human-friendly tool
for isolating IPv6 blackholes.
EXAMPLES
The following sections illustrate typical use cases of the script6 tool.
Example #1
$ script6 get-asn 2001:db8::1
Obtain the Origin Autonomous System (AS) number for the IPv6 address 2001:db8::1.
Example #2
$ script6 get-as 2001:db8::1
Obtain information about the Origin Autonomous System (AS) of the IPv6 address
2001:db8::1.
Example #3
$ cat domains.txt | script6 get-aaaa > domains-aaaa.txt
Map the domain names contained in the file "domains.txt" into AAAA records, and save the
results in the file "domains-aaaa.txt".
Example #4
# cat domains-aaaa.txt | script6 trace do8 tcp port 25 > trace-results.txt
Find IPv6 blackholes in the path to each of the IPv6 addresses contained in the file
"domains-aaaa.txt" (one per line), and save the results to the file "trace-results.txt".
The probe packets to be employed are IPv6 packets with a Destination Options header of 8
bytes, encapsulating a TCP segment with the Destinatio Port set to 25.
Example #5
$ cat trace-results.txt | script6 get-trace-stats
Produce statistics based on the trace results from the file "trace-results.txt" (produced
with "script6 trace").
SEE ALSO
blackhole6(1) path6(1)
draft-gont-v6ops-ipv6-ehs-in-real-world (available at:
<http://tools.ietf.org/html/draft-gont-v6ops-ipv6-ehs-in-real-world>) for a discussion of
support of IPv6 Extension Headers in the public Internet.
AUTHOR
The script6 tool and the corresponding manual pages were produced by Fernando Gont
<fgont@si6networks.com> for SI6 Networks <http://www.si6networks.com>.
COPYRIGHT
Copyright (c) 2014-2015 Fernando Gont.
Permission is granted to copy, distribute and/or modify this document under the terms of
the GNU Free Documentation License, Version 1.3 or any later version published by the Free
Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is available at <http://www.gnu.org/licenses/fdl.html>.
SCRIPT6(1)