Provided by: tcpreplay_4.5.1-1_amd64 
NAME
tcpreplay-edit - Replay network traffic stored in pcap files
SYNOPSIS
tcpreplay-edit [-flags] [-flag [value]] [--option-name[[=| ]value]] <pcap_file(s)> |
<pcap_dir(s)>
tcpreplay is a tool for replaying network traffic from files saved with tcpdump or other
tools which write pcap(3) files.
DESCRIPTION
The basic operation of tcpreplay is to resend all packets from the input file(s) at
the speed at which they were recorded, or a specified data rate, up to as fast as the
hardware is capable.
Optionally, the traffic can be split between two interfaces, written to files, filtered
and edited in various ways, providing the means to test firewalls, NIDS and other network
devices.
For more details, please see the Tcpreplay Manual at: http://tcpreplay.appneta.com
OPTIONS
-r string, --portmap=string
Rewrite TCP/UDP ports. This option may appear up to 9999 times.
Specify a list of comma delimited port mappings consisting of colon delimited port
number pairs. Each colon delimited port pair consists of the port to match
followed by the port number to rewrite.
Examples:
--portmap=80:8000 --portmap=8080:80 # 80->8000 and 8080->80
--portmap=8000,8080,88888:80 # 3 different ports become 80
--portmap=8000-8999:80 # ports 8000 to 8999 become 80
-s number, --seed=number
Randomize src/dst IPv4/v6 addresses w/ given seed. This option may appear up to 1
times. This option must not appear in combination with any of the following
options: fuzz-seed. This option takes an integer number as its argument.
Causes the source and destination IPv4/v6 addresses to be pseudo randomized but
still maintain client/server relationships. Since the randomization is
deterministic based on the seed, you can reuse the same seed value to recreate the
traffic.
-N string, --pnat=string
Rewrite IPv4/v6 addresses using pseudo-NAT. This option may appear up to 2 times.
This option must not appear in combination with any of the following options:
srcipmap.
Takes a comma delimited series of colon delimited CIDR netblock pairs. Each
netblock pair is evaluated in order against the IP addresses. If the IP address in
the packet matches the first netblock, it is rewritten using the second netblock as
a mask against the high order bits.
IPv4 Example:
--pnat=192.168.0.0/16:10.77.0.0/16,172.16.0.0/12:10.1.0.0/24
IPv6 Example:
--pnat=[2001:db8::/32]:[dead::/16],[2001:db8::/32]:[::ffff:0:0/96]
-S string, --srcipmap=string
Rewrite source IPv4/v6 addresses using pseudo-NAT. This option may appear up to 1
times. This option must not appear in combination with any of the following
options: pnat.
Works just like the --pnat option, but only affects the source IP addresses in the
IPv4/v6 header.
-D string, --dstipmap=string
Rewrite destination IPv4/v6 addresses using pseudo-NAT. This option may appear up
to 1 times. This option must not appear in combination with any of the following
options: pnat.
Works just like the --pnat option, but only affects the destination IP addresses in
the IPv4/v6 header.
-e string, --endpoints=string
Rewrite IP addresses to be between two endpoints. This option may appear up to 1
times. This option must appear in combination with the following options:
cachefile.
Takes a pair of colon delimited IPv4/v6 addresses which will be used to rewrite all
traffic to appear to be between the two IP addresses.
IPv4 Example:
--endpoints=172.16.0.1:172.16.0.2
IPv6 Example:
--endpoints=[2001:db8::dead:beef]:[::ffff:0:0:ac:f:0:2]
--tcp-sequence=number
Change TCP Sequence (and ACK) numbers /w given seed. This option takes an integer
number as its argument. The value of number is constrained to being:
greater than or equal to 1
The default number for this option is:
0
Change all TCP sequence numbers, and related sequence-acknowledgement numbers.
They will be shifted by a random amount based on the provided seed.
-b, --skipbroadcast
Skip rewriting broadcast/multicast IPv4/v6 addresses.
By default --seed, --pnat and --endpoints will rewrite broadcast and multicast
IPv4/v6 and MAC addresses. Setting this flag will keep broadcast/multicast IPv4/v6
and MAC addresses from being rewritten.
-C, --fixcsum
Force recalculation of IPv4/TCP/UDP header checksums.
Causes each IPv4/v6 packet to have their checksums recalculated and fixed.
Automatically enabled for packets modified with --seed, --pnat, --endpoints or
--fixlen.
--fixhdrlen
Alter IP/TCP header len to match packet length.
By default, tcpreplay will send packets with the original packet length, However,
you may want the packet length revised to minimum packet size. Using this option,
tcpreplay will rewrite (fix) the packet length, and recalculate checksums when
packet length changes. Caution: undesired packet changes may occur when this
option is specified.
-m number, --mtu=number
Override default MTU length (1500 bytes). This option may appear up to 1 times.
This option takes an integer number as its argument. The value of number is
constrained to being:
in the range 1 through MAX_SNAPLEN
Override the default 1500 byte MTU size for determining the maximum padding length
(--fixlen=pad) or when truncating (--mtu-trunc).
--mtu-trunc
Truncate packets larger then specified MTU. This option may appear up to 1 times.
Similar to --fixlen, this option will truncate data in packets from Layer 3 and
above to be no larger then the MTU.
-E, --efcs
Remove Ethernet checksums (FCS) from end of frames.
Note, this option is pretty dangerous! We do not actually check to see if a FCS
actually exists in the frame, we just blindly delete the last 4 bytes. Hence, you
should only use this if you know know that your OS provides the FCS when reading
raw packets.
--ttl=string
Modify the IPv4/v6 TTL/Hop Limit.
Allows you to modify the TTL/Hop Limit of all the IPv4/v6 packets. Specify a
number to hard-code the value or +/-value to increase or decrease by the value
provided (limited to 1-255).
Examples:
--ttl=10
--ttl=+7
--ttl=-64
--tos=number
Set the IPv4 TOS/DiffServ/ECN byte. This option may appear up to 1 times. This
option takes an integer number as its argument. The value of number is constrained
to being:
in the range 0 through 255
Allows you to override the TOS (also known as DiffServ/ECN) value in IPv4.
--tclass=number
Set the IPv6 Traffic Class byte. This option may appear up to 1 times. This
option takes an integer number as its argument. The value of number is constrained
to being:
in the range 0 through 255
Allows you to override the IPv6 Traffic Class field.
--flowlabel=number
Set the IPv6 Flow Label. This option may appear up to 1 times. This option takes
an integer number as its argument. The value of number is constrained to being:
in the range 0 through 1048575
Allows you to override the 20bit IPv6 Flow Label field. Has no effect on IPv4
packets.
-F string, --fixlen=string
Pad or truncate packet data to match header length. This option may appear up to 1
times.
Packets may be truncated during capture if the snaplen is smaller then the packet.
This option allows you to modify the packet to pad the packet back out to the size
stored in the IPv4/v6 header or rewrite the IP header total length to reflect the
stored packet length.
pad Truncated packets will be padded out so that the packet length matches the IPv4
total length
trunc Truncated packets will have their IPv4 total length field rewritten to match
the actual packet length
del Delete the packet
--fuzz-seed=number
Fuzz 1 in X packets. Edit bytes, length, or emulate packet drop. This option takes
an integer number as its argument. The value of number is constrained to being:
greater than or equal to 0
The default number for this option is:
0
This fuzzing was designed as to test layer 7 protocols such as voip protocols. It
modifies randomly 1 out of X packets (where X = --fuzz-factor) in order for
stateful protocols to cover more of their code. The random fuzzing actions focus
on data start and end because it often is the part of the data application
protocols base their decisions on.
Possible fuzzing actions list:
* drop packet
* reduce packet size
* edit packet Bytes:
* Not all Bytes have the same probability of appearance in real life.
Replace with 0x00, 0xFF, or a random byte with equal likelihood.
* Not all Bytes have the same significance in a packet.
Replace the start, the end, or the middle of the packet with equal likelihood.
* do nothing (7 out of 8 packets)
--fuzz-factor=number
Set the Fuzz 1 in X packet ratio (default 1 in 8 packets). This option must appear
in combination with the following options: fuzz-seed. This option takes an integer
number as its argument. The value of number is constrained to being:
greater than or equal to 1
The default number for this option is:
8
Sets the ratio of for --fuzz-seed option. By default this value is 8, which means 1
in 8 packets are modified by fuzzing. Note that this ratio is based on the random
number generated by the supplied fuzz seed. Therefore by default you cannot expect
that exactly every eighth packet will be modified.
--skipl2broadcast
Skip rewriting broadcast/multicast Layer 2 addresses.
By default, editing Layer 2 addresses will rewrite broadcast and multicast MAC
addresses. Setting this flag will keep broadcast/multicast MAC addresses from
being rewritten.
--dlt=string
Override output DLT encapsulation. This option may appear up to 1 times.
By default, no DLT (data link type) conversion will be made. To change the DLT
type of the output pcap, select one of the following values:
enet Ethernet aka DLT_EN10MB
hdlc Cisco HDLC aka DLT_C_HDLC
jnpr_eth Juniper Ethernet DLT_C_JNPR_ETHER
pppserial PPP Serial aka DLT_PPP_SERIAL
user User specified Layer 2 header and DLT type
--enet-dmac=string
Override destination ethernet MAC addresses. This option may appear up to 1 times.
Takes a pair of comma deliminated ethernet MAC addresses which will replace the
destination MAC address of outbound packets. The first MAC address will be used
for the server to client traffic and the optional second MAC address will be used
for the client to server traffic.
Example:
--enet-dmac=00:12:13:14:15:16,00:22:33:44:55:66
--enet-smac=string
Override source ethernet MAC addresses. This option may appear up to 1 times.
Takes a pair of comma deliminated ethernet MAC addresses which will replace the
source MAC address of outbound packets. The first MAC address will be used for the
server to client traffic and the optional second MAC address will be used for the
client to server traffic.
Example:
--enet-smac=00:12:13:14:15:16,00:22:33:44:55:66
--enet-subsmac=string
Substitute MAC addresses. This option may appear up to 9999 times.
Allows you to rewrite ethernet MAC addresses of packets. It takes comma delimited
pair or MACs address and rewrites all occurrences of the first MAC with the value
of the second MAC. Example:
--enet-subsmac=00:12:13:14:15:16,00:22:33:44:55:66
--enet-mac-seed=number
Randomize MAC addresses. This option may appear up to 1 times. This option must
not appear in combination with any of the following options: enet-smac, enet-dmac,
enet-subsmac. This option takes an integer number as its argument.
Allows you to randomize ethernet MAC addresses of packets, mostly like what --seed
option does for IPv4/IPv6 addresses.
--enet-mac-seed-keep-bytes=number
Randomize MAC addresses. This option may appear up to 1 times. This option must
appear in combination with the following options: enet-mac-seed. This option takes
an integer number as its argument. The value of number is constrained to being:
in the range 1 through 6
Keep some bytes untouched when usinging --enet-mac-seed option.
--enet-vlan=string
Specify ethernet 802.1q VLAN tag mode. This option may appear up to 1 times.
Allows you to rewrite ethernet frames to add a 802.1q header to standard 802.3
ethernet headers or remove the 802.1q VLAN tag information.
add Adds an 802.1q VLAN header to the existing 802.3 ethernet header. If a VLAN
header already exists, a new VLAN header is added outside of the existing header.
Note that you will be allowed to run this option multiple times to create more than
2 VLAN headers, however those packets will be valid. At most you should have 2 X
802.1q VLAN tags, or outer an 802.1ad and an inner 802.1q VLAN tag.
del Rewrites the existing 802.1q VLAN header as an 802.3 ethernet header
--enet-vlan-tag=number
Specify the new ethernet 802.1q VLAN tag value. This option may appear up to 1
times. This option must appear in combination with the following options: enet-
vlan. This option takes an integer number as its argument. The value of number is
constrained to being:
in the range 0 through 4095
--enet-vlan-cfi=number
Specify the ethernet 802.1q VLAN CFI value. This option may appear up to 1 times.
This option must appear in combination with the following options: enet-vlan. This
option takes an integer number as its argument. The value of number is constrained
to being:
in the range 0 through 1
--enet-vlan-pri=number
Specify the ethernet 802.1q VLAN priority. This option may appear up to 1 times.
This option must appear in combination with the following options: enet-vlan. This
option takes an integer number as its argument. The value of number is constrained
to being:
in the range 0 through 7
--enet-vlan-proto=string
Specify VLAN tag protocol 802.1q or 802.1ad. This option may appear up to 1 times.
Allows you to specify the protocol of the added VLAN tags.
802.1q Specifies that 802.1q VLAN headers are to be added. This is the default.
802.1ad Specifies that 802.1ad Q-in-Q VLAN headers are to be added. To make valid
packets, input packets must already have 802.1q VLAN headers.
--hdlc-control=number
Specify HDLC control value. This option may appear up to 1 times. This option
takes an integer number as its argument.
The Cisco HDLC header has a 1 byte "control" field. Apparently this should always
be 0, but if you can use any 1 byte value.
--hdlc-address=number
Specify HDLC address. This option may appear up to 1 times. This option takes an
integer number as its argument.
The Cisco HDLC header has a 1 byte "address" field which has two valid values:
0x0F Unicast
0xBF Broadcast
You can however specify any single byte value.
--user-dlt=number
Set output file DLT type. This option may appear up to 1 times. This option takes
an integer number as its argument.
Set the DLT value of the output pcap file.
--user-dlink=string
Rewrite Data-Link layer with user specified data. This option may appear up to 2
times.
Provide a series of comma deliminated hex values which will be used to rewrite or
create the Layer 2 header of the packets. The first instance of this argument will
rewrite both server and client traffic, but if this argument is specified a second
time, it will be used for the client traffic.
Example:
--user-dlink=01,02,03,04,05,06,00,1A,2B,3C,4D,5E,6F,08,00
-d number, --dbug=number
Enable debugging output. This option may appear up to 1 times. This option takes
an integer number as its argument. The value of number is constrained to being:
in the range 0 through 5
The default number for this option is:
0
If configured with --enable-debug, then you can specify a verbosity level for
debugging output. Higher numbers increase verbosity.
-q, --quiet
Quiet mode.
Print nothing except the statistics at the end of the run
-T string, --timer=string
Select packet timing mode: select, ioport, gtod, nano. This option may appear up
to 1 times. The default string for this option is:
gtod
Allows you to select the packet timing method to use:
nano - Use nanosleep() API
select - Use select() API
ioport - Write to the i386 IO Port 0x80
gtod [default] - Use a gettimeofday() loop
--maxsleep=number
Sleep for no more then X milliseconds between packets. This option takes an
integer number as its argument. The default number for this option is:
0
Set a limit for the maximum number of milliseconds that tcpreplay will sleep
between packets. Effectively prevents long delays between packets without
effecting the majority of packets. Default is disabled.
-v, --verbose
Print decoded packets via tcpdump to STDOUT. This option may appear up to 1 times.
-A string, --decode=string
Arguments passed to tcpdump decoder. This option may appear up to 1 times. This
option must appear in combination with the following options: verbose.
When enabling verbose mode (-v) you may also specify one or more additional
arguments to pass to tcpdump to modify the way packets are decoded. By default, -n
and -l are used. Be sure to quote the arguments like: -A "-axxx" so that they
are not interpreted by tcpreplay. Please see the tcpdump(1) man page for a
complete list of options.
-K, --preload-pcap
Preloads packets into RAM before sending.
This option loads the specified pcap(s) into RAM before starting to send in order
to improve replay performance while introducing a startup performance hit.
Preloading can be used with or without --loop. This option also suppresses flow
statistics collection for every iteration, which can significantly reduce memory
usage. Flow statistics are predicted based on options supplied and statistics
collected from the first loop iteration.
-c string, --cachefile=string
Split traffic via a tcpprep cache file. This option may appear up to 1 times.
This option must appear in combination with the following options: intf2. This
option must not appear in combination with any of the following options: dualfile.
If you have a pcap file you would like to use to send bi-directional traffic
through a device (firewall, router, IDS, etc) then using tcpprep you can create a
cachefile which tcpreplay will use to split the traffic across two network
interfaces.
-2, --dualfile
Replay two files at a time from a network tap. This option may appear up to 1
times. This option must appear in combination with the following options: intf2.
This option must not appear in combination with any of the following options:
cachefile.
If you captured network traffic using a network tap, then you can end up with two
pcap files- one for each direction. This option will replay these two files at the
same time, one on each interface and inter-mix them using the timestamps in each.
-i string, --intf1=string
Client to server/RX/primary traffic output interface. This option may appear up to
1 times. This option is a member of the intf1 class of options.
Required network interface used to send either all traffic or traffic which is
marked as 'primary' via tcpprep. Primary traffic is usually client-to-server or
inbound (RX) on khial virtual interfaces.
-I string, --intf2=string
Server to client/TX/secondary traffic output interface. This option may appear up
to 1 times.
Optional network interface used to send traffic which is marked as 'secondary' via
tcpprep. Secondary traffic is usually server-to-client or outbound (TX) on khial
virtual interfaces. Generally, it only makes sense to use this option with
--cachefile.
-w string, --write=string
Pcap file to receive traffic outputs. This option may appear up to 1 times. This
option is a member of the intf1 class of options. This option must not appear in
combination with any of the following options: intf2.
Optional pcap file name used to receive traffic.
--include=string
Send only selected packet numbers. This option may appear up to 1 times. This
option must not appear in combination with any of the following options: exclude.
Override default of processing all packets stored in the capture file and only send
packets that are part of a supplied list of packet numbers.
-x P:1-5,9,15,72-
would skip packets 1 through 5, the 9th and 15th packet, and packets 72 until the
end of the file
--exclude=string
Send all but selected packet numbers. This option may appear up to 1 times. This
option must not appear in combination with any of the following options: include.
Override default of processing all packets stored in the capture file and only send
packets that are NOT part of a supplied list of packet numbers.
-x P:1-5,9,15,72-
would skip packets 1 through 5, the 9th and 15th packet, and packets 72 until the
end of the file
--listnics
List available network interfaces and exit.
-l number, --loop=number
Loop through the capture file X times. This option may appear up to 1 times. This
option takes an integer number as its argument. The value of number is constrained
to being:
greater than or equal to 0
The default number for this option is:
1
--loopdelay-ms=number
Delay between loops in milliseconds. This option must appear in combination with
the following options: loop. This option must not appear in combination with any
of the following options: loopdelay-ns. This option takes an integer number as its
argument. The value of number is constrained to being:
greater than or equal to 0
The default number for this option is:
0
--loopdelay-ns=number
Delay between loops in nanoseconds. This option must appear in combination with
the following options: loop. This option must not appear in combination with any
of the following options: loopdelay-ms. This option takes an integer number as its
argument. The value of number is constrained to being:
greater than or equal to 0
The default number for this option is:
0
By default, tcpreplay will use loop delay with microsecond accuracy (loopdelay-ms).
In order to use loop delay with nanosecond accuracy you need to use nano packet
timing mode.
--pktlen
Override the snaplen and use the actual packet len. This option may appear up to 1
times.
By default, tcpreplay will send packets based on the size of the "snaplen" stored
in the pcap file which is usually the correct thing to do. However, occasionally,
tools will store more bytes then told to. By specifying this option, tcpreplay
will ignore the snaplen field and instead try to send packets based on the original
packet length. Bad things may happen if you specify this option.
-L number, --limit=number
Limit the number of packets to send. This option may appear up to 1 times. This
option takes an integer number as its argument. The value of number is constrained
to being:
greater than or equal to 1
The default number for this option is:
-1
By default, tcpreplay will send all the packets. Alternatively, you can specify a
maximum number of packets to send.
--duration=number
Limit the number of seconds to send. This option may appear up to 1 times. This
option takes an integer number as its argument. The value of number is constrained
to being:
greater than or equal to 1
The default number for this option is:
-1
By default, tcpreplay will send all the packets. Alternatively, you can specify a
maximum number of seconds to transmit.
-x string, --multiplier=string
Modify replay speed to a given multiple. This option may appear up to 1 times.
This option must not appear in combination with any of the following options: pps,
mbps, oneatatime, topspeed.
Specify a value to modify the packet replay speed. Examples:
2.0 will replay traffic at twice the speed captured
0.7 will replay traffic at 70% the speed captured
-p string, --pps=string
Replay packets at a given packets/sec. This option may appear up to 1 times. This
option must not appear in combination with any of the following options:
multiplier, mbps, oneatatime, topspeed.
Specify a value to regulate the packet replay to a specific packet-per-second rate.
Examples:
200 will replay traffic at 200 packets per second
0.25 will replay traffic at 15 packets per minute
-M string, --mbps=string
Replay packets at a given Mbps. This option may appear up to 1 times. This option
must not appear in combination with any of the following options: multiplier, pps,
oneatatime, topspeed.
Specify a floating point value for the Mbps rate that tcpreplay should send packets
at.
-t, --topspeed
Replay packets as fast as possible. This option must not appear in combination
with any of the following options: mbps, multiplier, pps, oneatatime.
-o, --oneatatime
Replay one packet at a time for each user input. This option must not appear in
combination with any of the following options: mbps, pps, multiplier, topspeed.
Allows you to step through one or more packets at a time.
--pps-multi=number
Number of packets to send for each time interval. This option must appear in
combination with the following options: pps. This option takes an integer number
as its argument. The value of number is constrained to being:
greater than or equal to 1
The default number for this option is:
1
When trying to send packets at very high rates, the time between each packet can be
so short that it is impossible to accurately sleep for the required period of time.
This option allows you to send multiple packets at a time, thus allowing for longer
sleep times which can be more accurately implemented.
--unique-ip
Modify IP addresses each loop iteration to generate unique flows. This option must
appear in combination with the following options: loop. This option must not
appear in combination with any of the following options: seed, fuzz-seed.
Ensure IPv4 and IPv6 packets will be unique for each --loop iteration. This is
done in a way that will not alter packet CRC, and therefore will generally not
affect performance. This option will significantly increase the flows/sec over
generated over multiple loop iterations.
--unique-ip-loops=string
Number of times to loop before assigning new unique ip. This option may appear up
to 1 times. This option must appear in combination with the following options:
unique-ip.
Number of --loop iterations before a new unique IP is assigned. Default is 1.
Assumes both --loop and --unique-ip.
--netmap
Write packets directly to netmap enabled network adapter.
This feature will detect netmap capable network drivers on Linux and BSD systems.
If detected, the network driver is bypassed for the execution duration, and network
buffers will be written to directly. This will allow you to achieve full line rates
on commodity network adapters, similar to rates achieved by commercial network
traffic generators. Note that bypassing the network driver will disrupt other
applications connected through the test interface. See INSTALL for more
information.
This feature can also be enabled by specifying an interface as 'netmap:<intf>' or
'vale:<intf>. For example 'netmap:eth0' specifies netmap over interface eth0.
--nm-delay=number
Netmap startup delay. This option takes an integer number as its argument. The
default number for this option is:
10
Number of seconds to delay after netmap is loaded. Required to ensure interfaces
are fully up before netmap transmit. Requires netmap option. Default is 10 seconds.
--no-flow-stats
Suppress printing and tracking flow count, rates and expirations.
Suppress the collection and printing of flow statistics. This option may improve
performance when not using --preload-pcap option, otherwise its only function is to
suppress printing.
The flow feature will track and print statistics of the flows being sent. A flow
is loosely defined as a unique combination of a 5-tuple, i.e. source IP,
destination IP, source port, destination port and protocol.
If --loop is specified, the flows from one iteration to the next will not be
unique, unless the packets are altered. Use --unique-ip or tcpreplay-edit to alter
packets between iterations.
--flow-expiry=number
Number of inactive seconds before a flow is considered expired. This option must
not appear in combination with any of the following options: no-flow-stats. This
option takes an integer number as its argument. The value of number is constrained
to being:
greater than or equal to 0
The default number for this option is:
0
This option will track and report flow expirations based on the flow idle times.
The timestamps within the pcap file are used to determine the expiry, not the
actual timestamp of the packets are replayed. For example, a value of 30 suggests
that if no traffic is seen on a flow for 30 seconds, any subsequent traffic would
be considered a new flow, and thereby will increment the flows and flows per second
(fps) statistics.
This option can be used to optimize flow timeout settings for flow products.
Setting the timeout low may lead to flows being dropped when in fact the flow is
simply slow to respond. Configuring your flow timeouts too high may increase
resources required by your flow product.
Note that using this option while replaying at higher than original speeds can lead
to inflated flows and fps counts.
Default is 0 (no expiry) and a typical value is 30-120 seconds.
-P, --pid
Print the PID of tcpreplay at startup.
--stats=number
Print statistics every X seconds, or every loop if '0'. This option takes an
integer number as its argument. The value of number is constrained to being:
greater than or equal to 0
Note that timed delays are a "best effort" and long delays between sending packets
may cause equally long delays between printing statistics.
-W, --suppress-warnings
suppress printing warning messages.
--xdp Write packets directly to AF_XDP enabled network adapter.
This feature will detect AF_XDP capable network drivers on Linux systems that have
'libxdp-dev' and 'libbpf-dev' installed. If detected, the network stack is bypassed
and packets are sent directly to an eBPF enabled driver directly. This will allow
you to achieve full line rates on commodity network adapters, similar to rates
achieved by commercial network traffic generators.
--xdp-batch-size=number
The maximum number of packets that can be submitted to the AF_XDP TX ring at once.
This option takes an integer number as its argument. The value of number is
constrained to being:
in the range 1 through 4096
The default number for this option is:
25
Higher values may improve performance at the cost of accuracy
-V, --version
Print version information.
-h, --less-help
Display less usage information and exit.
-H, --help
Display usage information and exit.
-!, --more-help
Pass the extended usage information through a pager.
--save-opts [=cfgfile]
Save the option state to cfgfile. The default is the last configuration file
listed in the OPTION PRESETS section, below. The command will exit after updating
the config file.
--load-opts=cfgfile, --no-load-opts
Load options from cfgfile. The no-load-opts form will disable the loading of
earlier config/rc/ini files. --no-load-opts is handled early, out of order.
OPTION PRESETS
Any option that is not marked as not presettable may be preset by loading values from
configuration ("RC" or ".INI") file(s). The homerc file is "$$/", unless that is a
directory. In that case, the file ".tcpreplay-editrc" is searched for within that
directory.
FILES
See OPTION PRESETS for configuration files.
EXIT STATUS
One of the following exit values will be returned:
0 (EXIT_SUCCESS)
Successful program execution.
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid.
66 (EX_NOINPUT)
A specified configuration file could not be loaded.
70 (EX_SOFTWARE)
libopts had an internal operational error. Please report it to autogen-
users@lists.sourceforge.net. Thank you.
AUTHORS
Copyright 2013-2024 Fred Klassen - AppNeta Copyright 2000-2012 Aaron Turner For support
please use the tcpreplay-users@lists.sourceforge.net mailing list. The latest version of
this software is always available from: http://tcpreplay.appneta.com/
COPYRIGHT
Copyright (C) 2000-2024 Aaron Turner and Fred Klassen all rights reserved. This program
is released under the terms of the GNU General Public License, version 3 or later.
BUGS
Please send bug reports to: tcpreplay-users@lists.sourceforge.net
NOTES
This manual page was AutoGen-erated from the tcpreplay-edit option definitions.