Ubuntu Manpage: tpm2_nvreadlock(1) - Lock the Non-Volatile (NV) index for further reads.

NAME

       tpm2_nvreadlock(1) - Lock the Non-Volatile (NV) index for further reads.

SYNOPSIS

       tpm2_nvreadlock [OPTIONS] [ARGUMENT]

DESCRIPTION

       tpm2_nvreadlock(1)  - Lock the Non-Volatile (NV) index for further reads.  The lock on the
       NN index is unlocked when the TPM is restarted and the NV index  becomes  readable  again.
       The  index  can  be  specified  as  raw  handle  or an offset value to the nv handle range
       “TPM2_HR_NV_INDEX”.

OPTIONS

       • -C, --hierarchy=OBJECT:

         Specifies the hierarchy used to authorize.  Supported options are:

         • o for TPM_RH_OWNER

         • p for TPM_RH_PLATFORM

         • <num> where a hierarchy handle or nv-index may be used.

         When -C isn’t explicitly passed the index handle will be used to authorize  against  the
         index.  The index auth value is set via the -p option to tpm2_nvdefine(1).

       • -P, --auth=AUTH:

         Specifies the authorization value for the hierarchy.

       • --cphash=FILE

         File  path  to  record  the  hash of the command parameters.  This is commonly termed as
         cpHash.  NOTE: When this option is selected, The tool  will  not  actually  execute  the
         command, it simply returns a cpHash unless rphash is also required.

       • --rphash=FILE

         File  path  to  record  the hash of the response parameters.  This is commonly termed as
         rpHash.

       • -S, --session=FILE:

         The session created using  tpm2_startauthsession.   This  can  be  used  to  specify  an
         auxiliary session for auditing and or encryption/decryption of the parameters.

       • -n, --name=FILE:

         The  name of the NV index that must be provided when only calculating the cpHash without
         actually dispatching the command to the TPM.

       • ARGUMENT the command line argument specifies the NV index or offset number.

   References

Context Object Format

       The type of a context object, whether it is a handle or file name, is determined according
       to the following logic in-order:

       • If  the  argument  is  a  file path, then the file is loaded as a restored TPM transient
         object.

       • If the argument is a prefix match on one of:

         • owner: the owner hierarchy

         • platform: the platform hierarchy

         • endorsement: the endorsement hierarchy

         • lockout: the lockout control persistent object

       • If the argument argument can be loaded as a  number  it  will  be  treat  as  a  handle,
         e.g. 0x81010013 and used directly._OBJECT_.

Authorization Formatting

Authorization for use of an object in TPM2.0 can come in 3 different forms: 1. Password
2. HMAC 3. Sessions

NOTE: “Authorizations default to the EMPTY PASSWORD when not specified”.

Passwords
Passwords are interpreted in the following forms below using prefix identifiers.

Note: By default passwords are assumed to be in the string form when they do not have a
prefix.

String
A string password, specified by prefix “str:” or it’s absence (raw string without prefix)
is not interpreted, and is directly used for authorization.

Examples
foobar
str:foobar

Hex-string
A hex-string password, specified by prefix “hex:” is converted from a hexidecimal form
into a byte array form, thus allowing passwords with non-printable and/or terminal un-
friendly characters.

Example
hex:1122334455667788

File
A file based password, specified be prefix “file:” should be the path of a file containing
the password to be read by the tool or a “-” to use stdin. Storing passwords in files
prevents information leakage, passwords passed as options can be read from the process
list or common shell history features.

Examples
# to use stdin and be prompted
file:-

# to use a file from a path
file:path/to/password/file

# to echo a password via stdin:
echo foobar | tpm2_tool -p file:-

# to use a bash here-string via stdin:

tpm2_tool -p file:- <<< foobar

Sessions
When using a policy session to authorize the use of an object, prefix the option argument
with the session keyword. Then indicate a path to a session file that was created with
tpm2_startauthsession(1). Optionally, if the session requires an auth value to be sent
with the session handle (eg policy password), then append a + and a string as described in
the Passwords section.

Examples
To use a session context file called session.ctx.

session:session.ctx

To use a session context file called session.ctx AND send the authvalue mypassword.

session:session.ctx+mypassword

To use a session context file called session.ctx AND send the HEX authvalue 0x11223344.

session:session.ctx+hex:11223344

PCR Authorizations
You can satisfy a PCR policy using the “pcr:” prefix and the PCR minilanguage. The PCR
minilanguage is as follows: <pcr-spec>=<raw-pcr-file>

The PCR spec is documented in in the section “PCR bank specifiers”.

The raw-pcr-file is an optional argument that contains the output of the raw PCR contents
as returned by tpm2_pcrread(1).

PCR bank specifiers

Examples
To satisfy a PCR policy of sha256 on banks 0, 1, 2 and 3 use a specifier of:

pcr:sha256:0,1,2,3

specifying AUTH.

COMMON OPTIONS

This collection of options are common to many programs and provide information that many
users may expect.

• -h, --help=[man|no-man]: Display the tools manpage. By default, it attempts to invoke
the manpager for the tool, however, on failure will output a short tool summary. This
is the same behavior if the “man” option argument is specified, however if explicit
“man” is requested, the tool will provide errors from man on stderr. If the “no-man”
option if specified, or the manpager fails, the short options will be output to stdout.

To successfully use the manpages feature requires the manpages to be installed or on
MANPATH, See man(1) for more details.

• -v, --version: Display version information for this tool, supported tctis and exit.

• -V, --verbose: Increase the information that the tool prints to the console during its
execution. When using this option the file and line number are printed.

• -Q, --quiet: Silence normal tool output to stdout.

• -Z, --enable-errata: Enable the application of errata fixups. Useful if an errata fixup
needs to be applied to commands sent to the TPM. Defining the environment
TPM2TOOLS_ENABLE_ERRATA is equivalent.

• -R, --autoflush: Enable autoflush for transient objects created by the command. If a
parent object is loaded from a context file also the transient parent object will be
flushed. Autoflush can also be activated if the environment variable
TPM2TOOLS_AUTOFLUSH is is set to yes or true. information many users may expect.

TCTI Configuration

The TCTI or “Transmission Interface” is the communication mechanism with the TPM. TCTIs
can be changed for communication with TPMs across different mediums.

To control the TCTI, the tools respect:

1. The command line option -T or --tcti

2. The environment variable: TPM2TOOLS_TCTI.

Note: The command line option always overrides the environment variable.

The current known TCTIs are:

• tabrmd - The resource manager, called tabrmd
(https://github.com/tpm2-software/tpm2-abrmd). Note that tabrmd and abrmd as a tcti
name are synonymous.

• mssim - Typically used for communicating to the TPM software simulator.

• device - Used when talking directly to a TPM device file.

• none - Do not initalize a connection with the TPM. Some tools allow for off-tpm options
and thus support not using a TCTI. Tools that do not support it will error when
attempted to be used without a TCTI connection. Does not support ANY options and MUST
BE presented as the exact text of “none”.

The arguments to either the command line option or the environment variable are in the
form:

<tcti-name>:<tcti-option-config>

Specifying an empty string for either the <tcti-name> or <tcti-option-config> results in
the default being used for that portion respectively.

TCTI Defaults
When a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics.
The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE THE FIRST
ONE FOUND. You can query what TCTI will be chosen as the default by using the -v option
to print the version information. The “default-tcti” key-value pair will indicate which
of the aforementioned TCTIs is the default.

Custom TCTIs
Any TCTI that implements the dynamic TCTI interface can be loaded. The tools internally
use dlopen(3), and the raw tcti-name value is used for the lookup. Thus, this could be a
path to the shared library, or a library name as understood by dlopen(3) semantics.

TCTI OPTIONS

This collection of options are used to configure the various known TCTI modules available:

• device: For the device TCTI, the TPM character device file for use by the device TCTI
can be specified. The default is /dev/tpm0.

Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

• mssim: For the mssim TCTI, the domain name or IP address and port number used by the
simulator can be specified. The default are 127.0.0.1 and 2321.

Example: -T mssim:host=localhost,port=2321 or export
TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

• abrmd: For the abrmd TCTI, the configuration string format is a series of simple key
value pairs separated by a `,' character. Each key and value string are separated by a
`=' character.

• TCTI abrmd supports two keys:

1. `bus_name' : The name of the tabrmd service on the bus (a string).

2. `bus_type' : The type of the dbus instance (a string) limited to `session' and
`system'.

Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:

\--tcti=tabrmd:bus_name=com.example.FooBar

Specify the default (abrmd) tcti and a config string of bus_type=session:

\--tcti:bus_type=session

NOTE: abrmd and tabrmd are synonymous. the various known TCTI modules.

EXAMPLES

   Lock an index
              tpm2_nvdefine -Q   1 -C o -s 32 \
              -a "ownerread|policywrite|ownerwrite|read_stclear"

              echo "foobar" > nv.readlock

              tpm2_nvwrite -Q   0x01000001 -C o -i nv.readlock

              tpm2_nvread -Q   1 -C o -s 6 -o 0

              tpm2_nvreadlock -Q   1 -C o

Returns

       Tools can return any of the following codes:

       • 0 - Success.

       • 1 - General non-specific error.

       • 2 - Options handling error.

       • 3 - Authentication error.

       • 4 - TCTI related error.

       • 5 - Non supported scheme.  Applicable to tpm2_testparams.

BUGS

       Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.linuxfoundation.org/mailman/listinfo/tpm2)