NAME

       tpm2_readclock(1) - Retrieves the time information from the TPM.

SYNOPSIS

       tpm2_readclock [OPTIONS]

DESCRIPTION

       tpm2_readclock(1) -Reads the current TPMS_TIME_INFO structure from the TPM.  The structure
       contains the current setting of Time, Clock, resetCount, and restartCount.  The  structure
       is output as YAML to stdout.  The YAML output is defined as:

              time: 13673142     # 64 bit value of time TPM has been powered on in ms.
              clock_info:
                clock: 13673142  # 64 bit value of time TPM has been powered on since last TPM2_Clear in ms.
                reset_count: 0   # 32 bit value of the number of TPM Resets since the last
                                 # TPM2_Clear.
                restart_count: 0 # 32 bit value of the number of times that TPM2_Shutdown or
                                 # _TPM_Hash_Start have occurred since the last TPM Reset or
                                 # TPM2_Clear.
                safe: yes        # boolean yes|no value that no value of Clock greater than
                                 # the current value of Clock has been previously reported by
                                 # the TPM.

       This tool takes no arguments and no tool specific options.

   References

COMMON OPTIONS

       This  collection  of options are common to many programs and provide information that many
       users may expect.

       • -h, --help=[man|no-man]: Display the tools manpage.  By default, it attempts  to  invoke
         the  manpager  for the tool, however, on failure will output a short tool summary.  This
         is the same behavior if the “man” option argument  is  specified,  however  if  explicit
         “man”  is  requested,  the tool will provide errors from man on stderr.  If the “no-man”
         option if specified, or the manpager fails, the short options will be output to stdout.

         To successfully use the manpages feature requires the manpages to  be  installed  or  on
         MANPATH, See man(1) for more details.

       • -v, --version: Display version information for this tool, supported tctis and exit.

       • -V,  --verbose:  Increase the information that the tool prints to the console during its
         execution.  When using this option the file and line number are printed.

       • -Q, --quiet: Silence normal tool output to stdout.

       • -Z, --enable-errata: Enable the application of errata fixups.  Useful if an errata fixup
         needs   to   be  applied  to  commands  sent  to  the  TPM.   Defining  the  environment
         TPM2TOOLS_ENABLE_ERRATA is equivalent.

       • -R, --autoflush: Enable autoflush for transient objects created by the  command.   If  a
         parent  object  is  loaded  from a context file also the transient parent object will be
         flushed.    Autoflush   can   also   be   activated   if   the   environment    variable
         TPM2TOOLS_AUTOFLUSH is is set to yes or true.  information many users may expect.

TCTI Configuration

       The  TCTI  or “Transmission Interface” is the communication mechanism with the TPM.  TCTIs
       can be changed for communication with TPMs across different mediums.

       To control the TCTI, the tools respect:

       1. The command line option -T or --tcti

       2. The environment variable: TPM2TOOLS_TCTI.

       Note: The command line option always overrides the environment variable.

       The current known TCTIs are:

       • tabrmd        -        The        resource        manager,         called         tabrmd
         (https://github.com/tpm2-software/tpm2-abrmd).   Note  that  tabrmd  and abrmd as a tcti
         name are synonymous.

       • mssim - Typically used for communicating to the TPM software simulator.

       • device - Used when talking directly to a TPM device file.

       • none - Do not initalize a connection with the TPM.  Some tools allow for off-tpm options
         and  thus  support  not  using  a  TCTI.   Tools  that do not support it will error when
         attempted to be used without a TCTI connection.  Does not support ANY options  and  MUST
         BE presented as the exact text of “none”.

       The  arguments  to  either  the command line option or the environment variable are in the
       form:

       <tcti-name>:<tcti-option-config>

       Specifying an empty string for either the <tcti-name> or <tcti-option-config>  results  in
       the default being used for that portion respectively.

   TCTI Defaults
       When  a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics.
       The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE  THE  FIRST
       ONE  FOUND.   You can query what TCTI will be chosen as the default by using the -v option
       to print the version information.  The “default-tcti” key-value pair will  indicate  which
       of the aforementioned TCTIs is the default.

   Custom TCTIs
       Any  TCTI  that implements the dynamic TCTI interface can be loaded.  The tools internally
       use dlopen(3), and the raw tcti-name value is used for the lookup.  Thus, this could be  a
       path to the shared library, or a library name as understood by dlopen(3) semantics.

TCTI OPTIONS

       This collection of options are used to configure the various known TCTI modules available:

       • device:  For  the  device TCTI, the TPM character device file for use by the device TCTI
         can be specified.  The default is /dev/tpm0.

         Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

       • mssim: For the mssim TCTI, the domain name or IP address and port  number  used  by  the
         simulator can be specified.  The default are 127.0.0.1 and 2321.

         Example:          -T          mssim:host=localhost,port=2321          or          export
         TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

       • abrmd: For the abrmd TCTI, the configuration string format is a  series  of  simple  key
         value  pairs separated by a `,' character.  Each key and value string are separated by a
         `=' character.

         • TCTI abrmd supports two keys:

           1. `bus_name' : The name of the tabrmd service on the bus (a string).

           2. `bus_type' : The type of the dbus instance (a  string)  limited  to  `session'  and
              `system'.

         Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:

                \--tcti=tabrmd:bus_name=com.example.FooBar

         Specify the default (abrmd) tcti and a config string of bus_type=session:

                \--tcti:bus_type=session

         NOTE: abrmd and tabrmd are synonymous.  the various known TCTI modules.

EXAMPLES

   Read the clock
              tpm2_readclock
              time: 13673142
              clock_info:
                clock: 13673142
                reset_count: 0
                restart_count: 0
                safe: yes

Returns

       Tools can return any of the following codes:

       • 0 - Success.

       • 1 - General non-specific error.

       • 2 - Options handling error.

       • 3 - Authentication error.

       • 4 - TCTI related error.

       • 5 - Non supported scheme.  Applicable to tpm2_testparams.

BUGS

       Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.linuxfoundation.org/mailman/listinfo/tpm2)