Provided by: virt-v2v_2.6.0-1_amd64 
NAME
virt-v2v-output-rhv - Using virt-v2v to convert guests to oVirt or RHV
SYNOPSIS
virt-v2v [-i* options] -o rhv-upload [-oc ENGINE_URL] -os STORAGE
[-op PASSWORD] [-of raw]
[-oo rhv-cafile=FILE]
[-oo rhv-cluster=CLUSTER]
[-oo rhv-proxy]
[-oo rhv-disk-uuid=UUID ...]
[-oo rhv-verifypeer]
virt-v2v [-i* options] -o rhv -os [esd:/path|/path]
virt-v2v [-i* options] -o vdsm
[-oo vdsm-image-uuid=UUID]
[-oo vdsm-vol-uuid=UUID]
[-oo vdsm-vm-uuid=UUID]
[-oo vdsm-ovf-output=DIR]
DESCRIPTION
This page documents how to use virt-v2v(1) to convert guests to an oVirt or RHV management
instance. There are three output modes that you can select, but only -o rhv-upload should
be used normally, the other two are deprecated:
-o rhv-upload -os STORAGE
Full description: "OUTPUT TO RHV"
This is the modern method for uploading to oVirt/RHV via the REST API. It requires
oVirt/RHV ≥ 4.2.
-o rhv -os esd:/path
-o rhv -os /path
Full description: "OUTPUT TO EXPORT STORAGE DOMAIN"
This is the old method for uploading to oVirt/RHV via the Export Storage Domain (ESD).
The ESD can either be accessed over NFS (using the -os esd:/path form) or if you have
already NFS-mounted it somewhere specify the path to the mountpoint as -os /path.
The Export Storage Domain was deprecated in oVirt 4, and so we expect that this method
will stop working at some point in the future.
-o vdsm
This is the old method used internally by the RHV-M user interface. It is never
intended to be used directly by end users.
OUTPUT TO RHV
This new method to upload guests to oVirt or RHV directly via the REST API requires
oVirt/RHV ≥ 4.2.
You need to specify -o rhv-upload as well as the following extra parameters:
-oc "https://ovirt-engine.example.com/ovirt-engine/api"
The URL of the REST API which is usually the server name with "/ovirt-engine/api"
appended, but might be different if you installed oVirt Engine on a different path.
You can optionally add a username and port number to the URL. If the username is not
specified then virt-v2v defaults to using "admin@internal" which is the typical
superuser account for oVirt instances.
-of raw
Currently you must use -of raw and you cannot use -oa preallocated.
These restrictions will be loosened in a future version.
-op password-file
A file containing a password to be used when connecting to the oVirt engine. Note the
file should contain the whole password, without any trailing newline, and for security
the file should have mode 0600 so that others cannot read it.
-os "ovirt-data"
The storage domain.
-oo rhv-cafile=ca.pem
The ca.pem file (Certificate Authority), copied from /etc/pki/ovirt-engine/ca.pem on
the oVirt engine.
If -oo rhv-verifypeer is enabled then this option can be used to control which CA is
used to verify the client’s identity. If this option is not used then the system’s
global trust store is used.
-oo rhv-cluster="CLUSTERNAME"
Set the RHV Cluster Name. If not given it uses "Default".
-oo rhv-disk-uuid="UUID"
This option can used to manually specify UUIDs for the disks when creating the virtual
machine. If not specified, the oVirt engine will generate random UUIDs for the disks.
Please note that:
• you must pass as many -oo rhv-disk-uuid=UUID options as the amount of disks in the
guest
• the specified UUIDs must not conflict with the UUIDs of existing disks
-oo rhv-proxy
Proxy the upload through oVirt Engine. This is slower than uploading directly to the
oVirt node but may be necessary if you do not have direct network access to the nodes.
-oo rhv-verifypeer
Verify the oVirt/RHV server’s identity by checking the server‘s certificate against
the Certificate Authority.
OUTPUT TO EXPORT STORAGE DOMAIN
This section only applies to the -o rhv output mode. If you use virt-v2v from the RHV-M
user interface, then behind the scenes the import is managed by VDSM using the -o vdsm
output mode (which end users should not try to use directly).
You have to specify -o rhv and an -os option that points to the RHV-M Export Storage
Domain. You can either specify the NFS server and mountpoint, eg.
"-os rhv-storage:/rhv/export", or you can mount that first and point to the directory
where it is mounted, eg. "-os /tmp/mnt". Be careful not to point to the Data Storage
Domain by accident as that will not work.
On successful completion virt-v2v will have written the new guest to the Export Storage
Domain, but it will not yet be ready to run. It must be imported into RHV using the UI
before it can be used.
In RHV ≥ 2.2 this is done from the Storage tab. Select the export domain the guest was
written to. A pane will appear underneath the storage domain list displaying several
tabs, one of which is "VM Import". The converted guest will be listed here. Select the
appropriate guest an click "Import". See the RHV documentation for additional details.
If you export several guests, then you can import them all at the same time through the
UI.
Testing RHV conversions
If you do not have an oVirt or RHV instance to test against, then you can test conversions
by creating a directory structure which looks enough like a RHV-M Export Storage Domain to
trick virt-v2v:
uuid=`uuidgen`
mkdir /tmp/rhv
mkdir /tmp/rhv/$uuid
mkdir /tmp/rhv/$uuid/images
mkdir /tmp/rhv/$uuid/master
mkdir /tmp/rhv/$uuid/master/vms
touch /tmp/rhv/$uuid/dom_md
virt-v2v [...] -o rhv -os /tmp/rhv
Debugging RHV-M import failures
When you export to the RHV-M Export Storage Domain, and then import that guest through the
RHV-M UI, you may encounter an import failure. Diagnosing these failures is infuriatingly
difficult as the UI generally hides the true reason for the failure.
There are several log files of interest:
/var/log/vdsm/import/
In oVirt ≥ 4.1.0, VDSM preserves the virt-v2v log file for 30 days in this directory.
This directory is found on the host which performed the conversion. The host can be
selected in the import dialog, or can be found under the "Events" tab in oVirt
administration.
/var/log/vdsm/vdsm.log
As above, this file is present on the host which performed the conversion. It
contains detailed error messages from low-level operations executed by VDSM, and is
useful if the error was not caused by virt-v2v, but by VDSM.
/var/log/ovirt-engine/engine.log
This log file is stored on the RHV-M server. It contains more detail for any errors
caused by the oVirt GUI.
SEE ALSO
virt-v2v(1).
AUTHOR
Richard W.M. Jones
COPYRIGHT
Copyright (C) 2009-2020 Red Hat Inc.
LICENSE
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301 USA.
BUGS
To get a list of bugs against libguestfs, use this link:
https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs, use this link:
https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please supply:
• The version of libguestfs.
• Where you got libguestfs (eg. which Linux distro, compiled from source, etc)
• Describe the bug accurately and give a way to reproduce it.
• Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
report.