plucky (3) SNMP::Info::CiscoConfig.3pm.gz

NAME

       SNMP::Info::CiscoConfig - SNMP Interface to Cisco Configuration Files

AUTHOR

       Justin Hunter, Eric Miller

SYNOPSIS

           my $ciscoconfig = new SNMP::Info(
                                 AutoSpecify => 1,
                                 Debug       => 1,
                                 DestHost    => 'myswitch',
                                 Community   => 'public',
                                 Version     => 2
                               )

           or die "Can't connect to DestHost.\n";

           my $class = $ciscoconfig->class();
           print " Using device sub class : $class\n";

DESCRIPTION

       SNMP::Info::CiscoConfig is a subclass of SNMP::Info that provides an interface to CISCO-CONFIG-COPY-MIB,
       CISCO-FLASH-MIB, and OLD-CISCO-SYS-MIB.  These MIBs facilitate the writing of configuration files.

       Use or create a subclass of SNMP::Info that inherits this one.  Do not use directly.

   Inherited Classes
           None.

   Required MIBs
       CISCO-CONFIG-COPY-MIB
       CISCO-FLASH-MIB
       OLD-CISCO-SYS-MIB

GLOBALS

       These are methods that return scalar value from SNMP

       $ciscoconfig->old_write_mem()
           ("writeMem")

       $ciscoconfig->old_write_net()
           ("writeNet")

TABLE METHODS

       These are methods that return tables of information in the form of a reference to a hash.

   Config Copy Request Table  ("ccCopyTable")
       $ciscoconfig->config_protocol()
           ("ccCopyProtocol")

       $ciscoconfig->config_source_type()
           ("ccCopySourceFileType")

       $ciscoconfig->config_dest_type()
           ("ccCopyDestFileType")

       $ciscoconfig->config_server_addr()
           ("ccCopyServerAddress")

       $ciscoconfig->config_filename()
           ("ccCopyFileName")

       $ciscoconfig->config_username()
           ("ccCopyUserName")

       $ciscoconfig->config_password()
           ("ccCopyUserPassword")

       $ciscoconfig->config_notify_complete()
           ("ccCopyNotificationOnCompletion")

       $ciscoconfig->config_copy_state()
           ("ccCopyState")

       $ciscoconfig->config_copy_start_time()
           ("ccCopyTimeStarted")

       $ciscoconfig->config_copy_complete_time()
           ("ccCopyTimeCompleted")

       $ciscoconfig->config_fail_cause()
           ("ccCopyFailCause")

       $ciscoconfig->config_row_status()
           ("ccCopyEntryRowStatus")

   Flash Copy Table ("ciscoFlashCopyTable")
       Table of Flash copy operation entries.

       $ciscoconfig->flash_copy_cmd()
           ("ciscoFlashCopyCommand")

       $ciscoconfig->flash_copy_protocol()
           ("ciscoFlashCopyProtocol")

       $ciscoconfig->flash_copy_address()
           ("ciscoFlashCopyServerAddress")

       $ciscoconfig->flash_copy_source()
           ("ciscoFlashCopySourceName")

       $ciscoconfig->flash_copy_dest()
           ("ciscoFlashCopyDestinationName")

       $ciscoconfig->flash_copy_row_status()
           ("ciscoFlashCopyEntryStatus")

SET METHODS

       These are methods that provide SNMP set functionality for overridden methods or provide a simpler
       interface to complex set operations.  See "SETTING DATA VIA SNMP" in SNMP::Info for general information
       on set operations.

       $ciscoconfig->copy_run_tftp (tftpserver, tftpfilename )
           Store the running configuration on a TFTP server.  Equivalent to the CLI commands "copy running-
           config tftp" or "write net".

           This method attempts to use newer "copy running-config tftp" procedure first and then the older
           "write net" procedure if that fails.  The newer procedure is supported Cisco devices with the CISCO-
           CONFIG-COPY-MIB available, Cisco IOS software release 12.0 or on some devices as early as release
           11.2P.  The older procedure has been depreciated by Cisco and is utilized only to support devices
           running older code revisions.

            Example:
            $ciscoconfig->copy_run_tftp('1.2.3.4', 'myconfig')
               or die "Couldn't save config. ",$ciscoconfig->error(1);

       $ciscoconfig->copy_run_start()
           Copy the running configuration to the start up configuration.  Equivalent to the CLI command "copy
           running-config startup-config" or "write mem".

           This method attempts to use newer "copy running-config startup-config" procedure first and then the
           older "write mem" procedure if that fails.  The newer procedure is supported Cisco devices with the
           CISCO-CONFIG-COPY-MIB available, Cisco IOS software release 12.0 or on some devices as early as
           release 11.2P.  The older procedure has been depreciated by Cisco and is utilized only to support
           devices running older code revisions.

            Example:
            $ciscoconfig->copy_run_start()
               or die "Couldn't save config. ",$ciscoconfig->error(1);