Provided by: libterm-sk-perl_0.18-3_all 
NAME
Term::Sk - Perl extension for displaying a progress indicator on a terminal.
SYNOPSIS
use Term::Sk;
my $ctr = Term::Sk->new('%d Elapsed: %8t %21b %4p %2d (%8c of %11m)',
{quiet => 0, freq => 10, base => 0, target => 100, pdisp => '!'});
$ctr->up for (1..100);
$ctr->down for (1..100);
$ctr->whisper('abc');
my last_line = $ctr->get_line;
$ctr->close;
print "Number of ticks: ", $ctr->ticks, "\n";
EXAMPLES
Term::Sk is a class to implement a progress indicator ("Sk" is a short form for "Show Key"). This is used
to provide immediate feedback for long running processes.
A sample code fragment that uses Term::Sk:
use Term::Sk;
print qq{This is a test of "Term::Sk"\n\n};
my $target = 2_845;
my $format = '%2d Elapsed: %8t %21b %4p %2d (%8c of %11m)';
my $ctr = Term::Sk->new($format,
{freq => 10, base => 0, target => $target, pdisp => '!'});
for (1..$target) {
$ctr->up;
do_something();
}
$ctr->close;
sub do_something {
my $test = 0;
for my $i (0..10_000) {
$test += sin($i) * cos($i);
}
}
Another example that counts upwards:
use Term::Sk;
my $format = '%21b %4p';
my $ctr = Term::Sk->new($format, {freq => 's', base => 0, target => 70});
for (1..10) {
$ctr->up(7);
sleep 1;
}
$ctr->close;
At any time, after Term::Sk->new(), you can query the number of ticks (i.e. number of calls to $ctr->up
or $ctr->down) using the method 'ticks':
use Term::Sk;
my $ctr = Term::Sk->new('%6c', {freq => 's', base => 0, target => 70});
for (1..4288) {
$ctr->up;
}
$ctr->close;
print "Number of ticks: ", $ctr->ticks, "\n";
This example uses a simple progress bar in quiet mode (nothing is printed to STDOUT), but instead, the
content of what would have been printed can now be extracted using the get_line() method:
use Term::Sk;
my $format = 'Ctr %4c';
my $ctr = Term::Sk->new($format, {freq => 2, base => 0, target => 10, quiet => 1});
my $line = $ctr->get_line;
$line =~ s/\010/</g;
print "This is what would have been printed upon new(): [$line]\n";
for my $i (1..10) {
$ctr->up;
$line = $ctr->get_line;
$line =~ s/\010/</g;
print "This is what would have been printed upon $i. call to up(): [$line]\n";
}
$ctr->close;
$line = $ctr->get_line;
$line =~ s/\010/</g;
print "This is what would have been printed upon close(): [$line]\n";
Here are some examples that show different values for option {num => ...}
my $format = 'act %c max %m';
my $ctr1 = Term::Sk->new($format, {base => 1234567, target => 2345678});
# The following numbers are shown: act 1_234_567 max 2_345_678
my $ctr2 = Term::Sk->new($format, {base => 1234567, target => 2345678, num => q{9,999}});
# The following numbers are shown: act 1,234,567 max 2,345,678
my $ctr3 = Term::Sk->new($format, {base => 1234567, target => 2345678, num => q{9'99}});
# The following numbers are shown: act 1'23'45'67 max 2'34'56'78
my $ctr4 = Term::Sk->new($format, {base => 1234567, target => 2345678, num => q{9}});
# The following numbers are shown: act 1234567 max 2345678
my $ctr5 = Term::Sk->new($format, {base => 1234567, target => 2345678,
commify => sub{ join '!', split m{}xms, $_[0]; }});
# The following numbers are shown: act 1!2!3!4!5!6!7 max 2!3!4!5!6!7!8
DESCRIPTION
Format strings
The first parameter to new() is the format string which contains the following special characters:
characters '%d'
a revolving dash, format '/-\|'
characters '%t'
time elapsed, format 'hh:mm:ss'
characters '%b'
progress bar, format '#####_____'
characters '%p'
Progress in percentage, format '999%'
characters '%c'
Actual counter value (commified by '_'), format '99_999_999'
characters '%m'
Target maximum value (commified by '_'), format '99_999_999'
characters '%k'
Token which updates its value before being displayed. An example use of this would be a loop wherein
every step of the loop could be identified by a particular string. For example:
my $ctr = Term::Sk->new('Processing %k counter %c',
{base => 0, token => 'Albania'});
foreach my $country (@list_of_european_nations) {
$ctr->token($country);
for (1..500) {
$ctr->up;
## do something...
}
};
$ctr->close;
You can also have more than one token on a single line. Here is an example:
my $ctr = Term::Sk->new('Processing %k Region %k counter %c',
{base => 0, token => ['Albania', 'South']});
foreach my $country (@list_of_european_nations) {
$ctr->token([$country, 'North']);
for (1..500) {
$ctr->up;
## do something...
}
};
$ctr->close;
The "token" method is used to update the token value immediately on the screen.
The "tok_maybe" method is used to set the token value, but the screen is not refreshed immediately.
If '%k' is used, then the counter must be instantiated with an initial value for the token.
characters '%P'
The '%' character itself
Options
The second parameter are the following options:
option {freq => 999}
This option sets the refresh-frequency on STDOUT to every 999 up() or down() calls. If {freq => 999}
is not specified at all, then the refresh-frequency is set by default to every up() or down() call.
option {freq => 's'}
This is a special case whereby the refresh-frequency on STDOUT is set to every second.
option {freq => 'd'}
This is a special case whereby the refresh-frequency on STDOUT is set to every 1/10th of a second.
option {base => 0}
This specifies the base value from which to count. The default is 0
option {target => 10_000}
This specifies the maximum value to which to count. The default is 10_000.
option {pdisp => '!'}
This option (with the exclamation mark) is obsolete and has no effect whatsoever. The progressbar
will always be displayed using the hash-symbol "#".
option {quiet => 1}
This option disables most printing to STDOUT, but the content of the would be printed line is still
available using the method get_line(). The whisper-method, however, still shows its output.
The default is in fact {quiet => !-t STDOUT}
option {num => '9_999'}
This option configures the output number format for the counters.
option {commify => sub{...}}
This option allows one to register a subroutine that formats the counters.
option {test => 1}
This option is used for testing purposes only, it disables all printing to STDOUT, even the whisper
shows no output. But again, the content of the would be printed line is still available using the
method get_line().
Processing
The new() method immediately displays the initial values on screen. From now on, nothing must be printed
to STDOUT and/or STDERR. However, you can write to STDOUT during the operation using the method
whisper().
We can either count upwards, $ctr->up, or downwards, $ctr->down. Everytime we do so, the value is either
incremented or decremented and the new value is replaced on STDOUT. We should do so regularly during the
process. Both methods, $ctr->up(99) and $ctr->down(99) can take an optional argument, in which case the
value is incremented/decremented by the specified amount.
When our process has finished, we must close the counter ($ctr->close). By doing so, the last displayed
value is removed from STDOUT, as if nothing had happened. Now we are allowed to print again to STDOUT
and/or STDERR.
Post hoc transformation
In some cases it makes sense to redirected STDOUT to a flat file. In this case, the backspace characters
remain in the flat file.
There is a function "rem_backspace()" that removes the backspaces (including the characters that they are
supposed to remove) from a redirected file.
Here is a simplified example:
use Term::Sk qw(rem_backspace);
my $flatfile = "Test hijabc\010\010\010xyzklmttt\010\010yzz";
printf "before (len=%3d): '%s'\n", length($flatfile), $flatfile;
rem_backspace(\$flatfile);
printf "after (len=%3d): '%s'\n", length($flatfile), $flatfile;
AUTHOR
Klaus Eichner, January 2008
COPYRIGHT AND LICENSE
Copyright (C) 2008-2011 by Klaus Eichner
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.